diff --git a/boot/ramdisk/default.prop b/boot/ramdisk/default.prop old mode 100644 new mode 100755 diff --git a/boot/ramdisk/file_contexts b/boot/ramdisk/file_contexts old mode 100644 new mode 100755 diff --git a/boot/ramdisk/fstab.mako b/boot/ramdisk/fstab.mako old mode 100644 new mode 100755 diff --git a/boot/ramdisk/init.mako.rc b/boot/ramdisk/init.mako.rc old mode 100644 new mode 100755 diff --git a/boot/ramdisk/init.rc b/boot/ramdisk/init.rc old mode 100644 new mode 100755 diff --git a/boot/ramdisk/property_contexts b/boot/ramdisk/property_contexts old mode 100644 new mode 100755 diff --git a/boot/ramdisk/res/images/charger/battery_fail.png b/boot/ramdisk/res/images/charger/battery_fail.png old mode 100644 new mode 100755 diff --git a/boot/ramdisk/res/images/charger/battery_scale.png b/boot/ramdisk/res/images/charger/battery_scale.png old mode 100644 new mode 100755 diff --git a/boot/ramdisk/seapp_contexts b/boot/ramdisk/seapp_contexts old mode 100644 new mode 100755 diff --git a/boot/ramdisk/sepolicy b/boot/ramdisk/sepolicy old mode 100644 new mode 100755 diff --git a/boot/ramdisk/service_contexts b/boot/ramdisk/service_contexts old mode 100644 new mode 100755 diff --git a/boot/ramdisk/system/.directory b/boot/ramdisk/system/.directory old mode 100644 new mode 100755 diff --git a/boot/ramdisk/ueventd.mako.rc b/boot/ramdisk/ueventd.mako.rc old mode 100644 new mode 100755 diff --git a/boot/ramdisk/ueventd.rc b/boot/ramdisk/ueventd.rc old mode 100644 new mode 100755 diff --git a/working/system/etc/firmware/wlan/prima/WCNSS_cfg.dat b/working/system/etc/firmware/wlan/prima/WCNSS_cfg.dat index 0637816..16ba06f 100644 Binary files a/working/system/etc/firmware/wlan/prima/WCNSS_cfg.dat and b/working/system/etc/firmware/wlan/prima/WCNSS_cfg.dat differ diff --git a/working/system/etc/firmware/wlan/prima/WCNSS_qcom_cfg.ini b/working/system/etc/firmware/wlan/prima/WCNSS_qcom_cfg.ini deleted file mode 100644 index 813ab3f..0000000 --- a/working/system/etc/firmware/wlan/prima/WCNSS_qcom_cfg.ini +++ /dev/null @@ -1,444 +0,0 @@ -# This file allows user to override the factory - -# defaults for the WLAN Driver - - -# Enable IMPS or not -gEnableImps=1 - -# Enable/Disable Idle Scan - -gEnableIdleScan=0 - - -# Enable/Disable vsta based on MAX Assoc limit -gEnableVSTASupport=1 - - -# Increase sleep duration (seconds) during IMPS -# 0 implies no periodic wake up from IMPS. Periodic wakeup is -# unnecessary if Idle Scan is disabled. -gImpsModSleepTime=0 - - -# Enable BMPS or not -gEnableBmps=1 - -# Enable suspend or not - -# 1: Enable standby, 2: Enable Deep sleep, 3: Enable Mcast/Bcast Filter - -gEnableSuspend=3 - -# Phy Mode (auto, b, g, n, etc) -# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac -gDot11Mode=0 - - -# CSR Roaming Enable(1) Disable(0) - -gRoamingTime=0 - - -# Assigned MAC Addresses - This will be used until NV items are in place - -# Each byte of MAC address is represented in Hex format as XX - -Intf0MacAddress=000AF58989FF -Intf1MacAddress=000AF58989FE -Intf2MacAddress=000AF58989FD - -Intf3MacAddress=000AF58989FC - - -# UAPSD service interval for VO,VI, BE, BK traffic - -InfraUapsdVoSrvIntv=0 - -InfraUapsdViSrvIntv=0 - -InfraUapsdBeSrvIntv=0 - -InfraUapsdBkSrvIntv=0 - -# Flag to allow STA send AddTspec even when ACM is Off -gAddTSWhenACMIsOff=1 - -# Make 1x1 the default antenna configuration - -gNumRxAnt=1 - - -# Beacon filtering frequency (unit in beacon intervals) - -gNthBeaconFilter=50 - - -# Enable WAPI or not - -# WAPIIsEnabled=0 - - -# Flags to filter Mcast abd Bcast RX packets. - -# Value 0: No filtering, 1: Filter all Multicast. - -# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast - -McastBcastFilter=3 - - -#Flag to enable HostARPOffload feature or not - -hostArpOffload=1 - - -#Flag to enable HostNSOffload feature or not - -hostNSOffload=0 - -#SoftAP Related Parameters - -# AP MAc addr - -gAPMacAddr=000AF589dcab - - -# 802.11n Protection flag - -gEnableApProt=1 - - -#Enable OBSS protection - -gEnableApOBSSProt=1 - - -#Enable/Disable UAPSD for SoftAP - -gEnableApUapsd=1 - - -# Fixed Rate - -gFixedRate=0 - - -# Maximum Tx power - -# gTxPowerCap=30 - - -# Fragmentation Threshold - -# gFragmentationThreshold=2346 - - -# RTS threshold - -RTSThreshold=2347 - - -# Intra-BSS forward - -gDisableIntraBssFwd=0 - - -# WMM Enable/Disable - -WmmIsEnabled=0 - - -# 802.11d support - -g11dSupportEnabled=1 - -# 802.11h support - -g11hSupportEnabled=1 - -# ESE Support and fast transition -EseEnabled=0 -ImplicitQosIsEnabled=0 -gNeighborScanTimerPeriod=200 - -gNeighborLookupThreshold=76 -gNeighborReassocThreshold=81 - -gNeighborScanChannelMinTime=20 -gNeighborScanChannelMaxTime=30 -gMaxNeighborReqTries=3 - -# Legacy (non-ESE, non-802.11r) Fast Roaming Support -# To enable, set FastRoamEnabled=1 -# To disable, set FastRoamEnabled=0 -FastRoamEnabled=1 - -#Check if the AP to which we are roaming is better than current AP in terms of RSSI. -#Checking is disabled if set to Zero.Otherwise it will use this value as to how better -#the RSSI of the new/roamable AP should be for roaming -RoamRssiDiff=3 - -# If the RSSI of any available candidate is better than currently associated -# AP by at least gImmediateRoamRssiDiff, then being to roam immediately (without -# registering for reassoc threshold). -# NOTE: Value of 0 means that we would register for reassoc threshold. -gImmediateRoamRssiDiff=10 - -# To enable, set gRoamIntraBand=1 (Roaming within band) -# To disable, set gRoamIntraBand=0 (Roaming across band) - -gRoamIntraBand=0 - -#SAP Country code - -# Default Country Code is 2 bytes, 3rd byte is optional indoor or out door. - -# Example - -# US Indoor, USI - -# Korea Outdoor, KRO - -# Japan without optional byte, JP - -# France without optional byte, FR - -#gAPCntryCode=USI - - -#Short Guard Interval Enable/disable - -gShortGI20Mhz=1 - -gShortGI40Mhz=1 - - -#Auto Shutdown Value in seconds. A value of 0 means Auto shutoff is disabled - -gAPAutoShutOff=0 - - -# SAP auto channel selection configuration - -# 0 = disable auto channel selection - -# 1 = enable auto channel selection, channel provided by supplicant will be ignored - -gApAutoChannelSelection=1 - - -# Listen Energy Detect Mode Configuration - -# Valid values 0-128 - -# 128 means disable Energy Detect feature - -# 0-9 are threshold code and 7 is recommended value from system if feature is to be enabled. - -# 10-128 are reserved. - -# The EDET threshold mapping is as follows in 3dB step: - -# 0 = -60 dBm - -# 1 = -63 dBm - -# 2 = -66 dBm - -# ... - -# 7 = -81 dBm - -# 8 = -84 dBm - -# 9 = -87 dBm - -# Note: Any of these settings are valid. Setting 0 would yield the highest power saving (in a noisy environment) at the cost of more range. The range impact is approximately #calculated as: - -# - -# Range Loss (dB) = EDET threshold level (dBm) + 97 dBm. - -# - -gEnablePhyAgcListenMode=128 - - -#Preferred channel to start BT AMP AP mode (0 means, any channel) - -BtAmpPreferredChannel=0 - - -#Preferred band (both or 2.4 only or 5 only) - -BandCapability=0 - - -#Beacon Early Termination (1 = enable the BET feature, 0 = disable) - -enableBeaconEarlyTermination=0 - -beaconEarlyTerminationWakeInterval=3 - - -#Bluetooth Alternate Mac Phy (1 = enable the BT AMP feature, 0 = disable) - -gEnableBtAmp=0 - - -#SOFTAP Channel Range selection - -gAPChannelSelectStartChannel=1 - -gAPChannelSelectEndChannel=11 - - -#SOFTAP Channel Range selection Operating band - -# 0:2.4GHZ 1: LOW-5GHZ 2:MID-5GHZ 3:HIGH-5GHZ 4: 4.9HZ BAND - -gAPChannelSelectOperatingBand=0 - - -#Channel Bonding -gChannelBondingMode5GHz=1 - - -#Enable Keep alive with non-zero period value - -#gStaKeepAlivePeriod = 30 - -#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds). -#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link is idle for last 10 seconds.) -#For both active and power save clients. - -#Power save clients: DUT set TIM bit from 10th second onwards and till client honors TIM bit. -#If doesn't honor for 5 seconds then DUT remove client. - -#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not success still we try on -#11th second if not tries on 12th and so on till 15th second. Hence before disconnection DUT will send 5 NULL frames. -#Hence in any case DUT will detect client got removed in (10+5) seconds. i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod).. - -#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and it is period -#where we send NULL frame. - -#gApLinkMonitorPeriod = 10 - -#gGoLinkMonitorPeriod = 10 - -#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame are succeed to send or not. -#Hence total effective detection time is gGoLinkMonitorPeriod+ gGoKeepAlivePeriod/gApLinkMonitorPeriod+ gApKeepAlivePeriod. - - -gGoKeepAlivePeriod=30 - -gApKeepAlivePeriod=10 - - -#If set will start with active scan after driver load, otherwise will start with - -#passive scan to find out the domain - -gEnableBypass11d=1 - - -#If set to 0, will not scan DFS channels - -gEnableDFSChnlScan=1 - - -gVhtChannelWidth=2 -gEnableLogp=1 - - -# Enable Automatic Tx Power control - -gEnableAutomaticTxPowerControl=0 - -# 0 for OLPC 1 for CLPC and SCPC -gEnableCloseLoop=1 - -#Data Inactivity Timeout when in powersave (in ms) -gDataInactivityTimeout=200 - -# VHT Tx/Rx MCS values -# Valid values are 0,1,2. If commented out, the default value is 0. -# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9 -gVhtRxMCS=2 -gVhtTxMCS=2 - -# Enable CRDA regulatory support by settings default country code -#gCrdaDefaultCountryCode=TW - -# Scan Timing Parameters -# gPassiveMaxChannelTime=110 -# gPassiveMinChannelTime=60 -# gActiveMaxChannelTime=40 -# gActiveMinChannelTime=20 - -#If set to 0, MCC is not allowed. -gEnableMCCMode=1 - -# 1=enable STBC; 0=disable STBC -gEnableRXSTBC=1 - -# Enable Active mode offload -gEnableActiveModeOffload=1 - -#Enable Scan Results Aging based on timer -#Timer value is in seconds -#If Set to 0 it will not enable the feature -gScanAgingTime=0 - -#Enable Power saving mechanism Based on Android Framework -#If set to 0 Driver internally control the Power saving mechanism -#If set to 1 Android Framwrok control the Power saving mechanism -isAndroidPsEn=0 - -#disable LDPC in STA mode if the AP is TXBF capable -gDisableLDPCWithTxbfAP=1 - -#Enable thermal mitigation -gThermalMitigationEnable=1 - -gEnableFastRoamInConcurrency=1 - -#List of Country codes for which 11ac needs to be disabled -#Each country code must be delimited by comma(,) -gListOfNon11acCountryCode=RU,UA,ZA - -#Maxium Channel time in msec -gMaxMediumTime = 5480 - -# 802.11K support -gRrmEnable=1 -gRrmOperChanMax=8 -gRrmNonOperChanMax=8 -gRrmRandIntvl=100 - -#Scan offload -gEnableDirectedScanOffload=0 - -#FlexConnect Power Factor -#Default is set to 0 (disable) -gFlexConnectPowerFactor=0 - -#SAP/P2P-GO mode traffic monitor -gEnableTrafficMonitor=1 -gTrafficIdleTimeout=3000 - -#Disable/Enable Strict FCC Regulatory -# 0 to disable, 1 to enable -gEnableStrictRegulatoryForFCC=1 - -#Enable/Disable Modulated DTIM feature -gEnableModulatedDTIM=3 - -#max LI value for modulated DTIM -gMaxLIModulatedDTIM=3 - -END - -# Note: Configuration parser would not read anything past the END marker - diff --git a/working/system/etc/firmware/wlan/prima/WCNSS_qcom_wlan_nv.bin b/working/system/etc/firmware/wlan/prima/WCNSS_qcom_wlan_nv.bin deleted file mode 100644 index 9ecfc08..0000000 Binary files a/working/system/etc/firmware/wlan/prima/WCNSS_qcom_wlan_nv.bin and /dev/null differ diff --git a/working/system/vendor/firmware/wlan/prima/WCNSS_qcom_cfg.ini b/working/system/vendor/firmware/wlan/prima/WCNSS_qcom_cfg.ini deleted file mode 100644 index 01a350f..0000000 --- a/working/system/vendor/firmware/wlan/prima/WCNSS_qcom_cfg.ini +++ /dev/null @@ -1,254 +0,0 @@ -# This file allows user to override the factory -# defaults for the WLAN Driver - -# Enable IMPS or not -gEnableImps=1 - -# Enable/Disable Idle Scan -gEnableIdleScan=0 - -# Increase sleep duration (seconds) during IMPS -# 0 implies no periodic wake up from IMPS. Periodic wakeup is -# unnecessary if Idle Scan is disabled. -gImpsModSleepTime=0 - -# Enable BMPS or not -gEnableBmps=1 - -# Enable Close Loop or not -gEnableCloseLoop=1 - -# Enable suspend or not -# 1: Enable standby, 2: Enable Deep sleep, 3: Enable Mcast/Bcast Filter -gEnableSuspend=3 - -# Phy Mode (auto, b, g, n, etc) -gDot11Mode=0 - -# Handoff Enable(1) Disable(0) -gEnableHandoff=0 - -# CSR Roaming Enable(1) Disable(0) -gRoamingTime=0 - -# Assigned MAC Addresses - This will be used until NV items are in place -# Each byte of MAC address is represented in Hex format as XX -Intf0MacAddress=40B0FAC1A4B3 -Intf1MacAddress=000AF58989FE -Intf2MacAddress=000AF58989FD -Intf3MacAddress=000AF58989FC - -# UAPSD service interval for VO,VI, BE, BK traffic -InfraUapsdVoSrvIntv=0 -InfraUapsdViSrvIntv=0 -InfraUapsdBeSrvIntv=0 -InfraUapsdBkSrvIntv=0 - -# Enable Firmware RSSI monitoring for roaming -gEnableFWRssiMonitoring=1 - -# Make 1x1 the default antenna configuration -gNumRxAnt=1 - -# Beacon filtering frequency (unit in beacon intervals) -gNthBeaconFilter=50 - -# Enable WAPI or not -# WAPIIsEnabled=0 - -# Flags to filter Mcast and Bcast RX packets. -# Value 0: No filtering, 1: Filter all Multicast. -# 2: Filter all Broadcast. 3: Filter all Mcast and Bcast -McastBcastFilter=3 - -# Flag to enable Active mode offload -gEnableActiveModeOffload=1 - -# Flag to enable HostARPOffload feature or not -hostArpOffload=1 - -# Flag to enable Host IPv6 NS Offload feature or not -hostNSOffload=1 - -#SoftAP Related Parameters -# AP MAc addr (obsolete) -gAPMacAddr=40B0FAC1A4B3 - -# Enable Random BSSID -gEnableApRandomBssid=1 - -# 802.11n Protection flag -gEnableApProt=1 - -# Enable OBSS protection -gEnableApOBSSProt=0 - -# Enable/Disable UAPSD for SoftAP -gEnableApUapsd=1 - -# Fixed Rate -gFixedRate=0 - -# Maximum Tx power -# gTxPowerCap=30 - -# Fragmentation Threshold -# gFragmentationThreshold=2346 - -# RTS threshold -RTSThreshold=2347 - -# Intra-BSS forward -gDisableIntraBssFwd=0 - -# WMM Enable/Disable -WmmIsEnabled=0 - -# 802.11d support -g11dSupportEnabled=1 - -# CCX Support and fast transition -CcxEnabled=0 -FastTransitionEnabled=1 -ImplicitQosIsEnabled=1 -gNeighborScanTimerPeriod=200 - -gNeighborLookupThreshold=76 -gNeighborReassocThreshold=81 - -gNeighborScanChannelMinTime=20 -gNeighborScanChannelMaxTime=30 -gMaxNeighborReqTries=3 - -# Legacy (non-CCX, non-802.11r) Fast Roaming Support -# To enable, set FastRoamEnabled=1, gEnableFWRssiMonitoring=1, FastTransitionEnabled=1 -# To disable, set FastRoamEnabled=0, gEnableFWRssiMonitoring=0, FastTransitionEnabled=0 -FastRoamEnabled=1 - -#Check if the AP to which we are roaming is better than current AP in terms of RSSI. -#Checking is disabled if set to Zero.Otherwise it will use this value as to how better -#the RSSI of the new/roamable AP should be for roaming -RoamRssiDiff=3 - -#Configure the RSSI gap that will be used to partition/categorize width of -#each individual category (aka bucket). -gRssiCatGap=5 - -# SAP Country code -# Default Country Code is 2 bytes, 3rd byte is optional indoor or out door. -# Example -# US Indoor, USI -# Korea Outdoor, KRO -# Japan without optional byte, JP -# France without optional byte, FR -#gAPCntryCode=USI - -#Short Guard Interval Enable/disable -gShortGI20Mhz=1 -gShortGI40Mhz=1 - -#Auto Shutdown Value in seconds. A value of 0 means Auto shutoff is disabled -gAPAutoShutOff=0 - -# SAP auto channel selection configuration -# 0 = disable auto channel selection -# 1 = enable auto channel selection, channel provided by supplicant will be ignored -gApAutoChannelSelection=0 - -# Listen Energy Detect Mode Configuration -# Valid values 0-128 -# 128 means disable Energy Detect feature -# 0-9 are threshold code and 7 is recommended value from system if feature is to be enabled. -# 10-128 are reserved. -# The EDET threshold mapping is as follows in 3dB step: -# 0 = -60 dBm -# 1 = -63 dBm -# 2 = -66 dBm -# ... -# 7 = -81 dBm -# 8 = -84 dBm -# 9 = -87 dBm -# Note: Any of these settings are valid. Setting 0 would yield the highest power saving (in a noisy environment) at the cost of more range. The range impact is approximately #calculated as: -# -# Range Loss (dB) = EDET threshold level (dBm) + 97 dBm. -# -gEnablePhyAgcListenMode=128 - -#Preferred band (both or 2.4 only or 5 only) -BandCapability=0 - -#Forced Device Listen Interval in multiples of DTIM Period aligned to DTIM -gEnableModulatedDTIM=3 - -#Beacon Early Termination (1 = enable the BET feature, 0 = disable) -enableBeaconEarlyTermination=1 -beaconEarlyTerminationWakeInterval=11 - -#Bluetooth Alternate Mac Phy (1 = enable the BT AMP feature, 0 = disable) -gEnableBtAmp=0 - -#Preferred channel to start BT AMP AP mode (0 means, any channel) -BtAmpPreferredChannel=0 - -#SOFTAP Channel Range selection -gAPChannelSelectStartChannel=1 -gAPChannelSelectEndChannel=11 - -#SOFTAP Channel Range selection Operating band -# 0:2.4GHZ 1: LOW-5GHZ 2:MID-5GHZ 3:HIGH-5GHZ 4: 4.9HZ BAND -gAPChannelSelectOperatingBand=0 - -#Enable Keep alive with non-zero period value -gStaKeepAlivePeriod = 25 - -#If set will start with active scan after driver load, otherwise will start with -#passive scan to find out the domain -gEnableBypass11d=1 - -#If set to 0, will not scan DFS channels -gEnableDFSChnlScan=1 - -# Enable logp/SSR -gEnableLogp=1 - -# Enable HT40 -gChannelBondingMode5GHz=1 - -# Enable Automatic Tx Power control -gEnableAutomaticTxPowerControl=1 - -# Derive P2P MAC address from primary MAC address -isP2pDeviceAddrAdministrated=1 - -# Disable channel 165 for Indonesia -gIgnore_Chan165=1 - -btcStaticLenLeBt=120000 -btcStaticLenLeWlan=30000 - -#Data Inactivity Timeout when in powersave (in ms) -gDataInactivityTimeout=200 - -gCountryCodePriority=1 - -gNumChanCombinedConc=255 - -# TDLS configuration -gEnableTDLSSupport=1 -gEnableTDLSImplicitTrigger=1 -gTDLSExternalControl=1 -gTDLSTxStatsPeriod=500 -gTDLSTxPacketThreshold=10 -gTDLSDiscoveryPeriod=20000 -gTDLSMaxDiscoveryAttempt=5 -gTDLSIdleTimeout=40000 -gTDLSRssiHysteresis=100 -gTDLSRSSITriggerThreshold=-60 -gTDLSIdlePacketThreshold=5 -gTDLSRSSITeardownThreshold=-70 - -# Enable IPv6 RA filtering -gMCAddrListEnable=1 - -END -# Note: Configuration parser would not read anything past the END marker diff --git a/working/system/vendor/firmware/wlan/prima/WCNSS_qcom_wlan_nv.bin b/working/system/vendor/firmware/wlan/prima/WCNSS_qcom_wlan_nv.bin deleted file mode 100644 index f0bf95b..0000000 Binary files a/working/system/vendor/firmware/wlan/prima/WCNSS_qcom_wlan_nv.bin and /dev/null differ