Replies: 8 comments 17 replies
-
|
waiting for answers as well |
Beta Was this translation helpful? Give feedback.
-
|
I just had a good success going in this order. Take your song (vocals, instrumentals, all of it, the original). Run it through UVR5 with the (MDX) Kim Vocals 2 model. Take the vocal output and run THAT through the (VR) de-reverb model. Take the output from that and run it through the (VR) aggressive de-echo model. Take the output from that and run it through a (VR) karaoke model. |
Beta Was this translation helpful? Give feedback.
-
|
Why don't you try it and find out :) |
Beta Was this translation helpful? Give feedback.
-
|
Hi, are you talking about using UVR-DeEcho-DeReverb, then UVR-De-Echo-Aggressive? |
Beta Was this translation helpful? Give feedback.
-
|
I have found that just using MDX Kim Vocals 1 or 2 and then VR UVR-De-Echo-Normal does a better job with fewer processing than the 4 steps posted earlier. I have been laid up in bed for a week and have experimented extensively, but it seems there are many different approaches to accomplish good results but the two processing methods I have posted do it much quicker and simpler. |
Beta Was this translation helpful? Give feedback.
-
|
Under CHOOSE VR MODEL, just download the "UVR-De-Echo-Normal" from the "VR Arch" Download Center |
Beta Was this translation helpful? Give feedback.
-
|
Thanks @wooley553 for the advice from your experimentation! Are you referring to the model by FoxJoy (below) for your second stage? |
Beta Was this translation helpful? Give feedback.
-
|
Thanks LucidFir and soucarlosxavier |
Beta Was this translation helpful? Give feedback.
-
|
@Aviteshmurmu19 , @soucarlosxavier thanks for the very helpful comments and diagram. Am I right to think that for clean vocals from a movie, it would be sufficient to do just the first and last steps? Any thoughts and pointers would be helpful --I'm not an expert in audio engineering. Thanks. |
Beta Was this translation helpful? Give feedback.
-
|
@dgoryeo That depends on what you are trying to achieve. But what ever that is, if at all possible, try to work ONLY on the center channel if you have a surround soundtrack available, that should give the cleanest results. If you try to extract movie vocals for RVC training, you should still use the de-echoing step. (I prefer UVR-DeEcho-DeReverb in the VR model section, but what model gives you the cleanest results depends heavily on the input audio). @Aviteshmurmu19 |
Beta Was this translation helpful? Give feedback.
-
|
@soucarlosxavier hello sir saw you comment. "I've had a great result running the audio thru Kim Vocals 2 them taking the exported audi and running againg using HP-Karaoke-UVR. It cleaned the minor artifacts the Kim Vocals 2 model left." How did you just select one. When I try to do it says select two model. Please can you explain the process |
Beta Was this translation helpful? Give feedback.
-
|
it;s because you are using ensabled mode switch to other modes which has the required model you wish to run and then try it |
Beta Was this translation helpful? Give feedback.
-
Am I selecting the right setting for vocal and ins extracting? Please guide if I need to do some additional settings to improve the vocal and instrumental quality. Thanks in advance
|
Beta Was this translation helpful? Give feedback.
-
|
well you have to do it one by one like furst run the whole thing through one model and then the result through the other model model and then the output of that model through the other one step wise as shown in this comment that's how it is done, and change the process mode to mdx for kim vocals from ensambled mode, and vr for deverb that how you only select one model from each mode. if you didn't understod just ask and i'll try my best next time to provide ya pics along with easy to follow guide |
Beta Was this translation helpful? Give feedback.
-
|
I got it man thank you so very much. Can you also please tell which is the bestest model to separate just the beats (crystal clear) from any track whether instrumental or with vocals |
Beta Was this translation helpful? Give feedback.
-
|
What Segment Size and overlap? |
Beta Was this translation helpful? Give feedback.
-
|
|
Beta Was this translation helpful? Give feedback.
-
|
hey babe press the wrench next to start processing then download center, then vr, and download any one of those models you see |
Beta Was this translation helpful? Give feedback.
-
|
Choose "Multi-stem Ensemble" in the main stem pair dropdown instead of "Vocals/Instrumental" |
Beta Was this translation helpful? Give feedback.
-
|
Besides removing vocals are there any plugins for uvr5 to create a center channel and LFE from a stereo track for use in making a 5.1 surround mix? |
Beta Was this translation helpful? Give feedback.
-
The models is the part that confuse me and i need help with the best ones for vocal extract. pls help.
Beta Was this translation helpful? Give feedback.
All reactions