Random parallel build failures #1072
Comments
|
You ouput is unclear to me. What subdir exactly fails? Is it damageext? |
|
It's not clear to me either, but that's what I see! It does look like the error is triggered from the damageext directory. |
|
Just stumbled over this in nx-X11/programs/Xserver/Imakefile: So you probably have to run the topdir |
|
Hm, I tried that, but it didn't seem to make any difference: |
|
I see "./configure" in the output. That is used for _some_ components. Of
course that is not synced with the imake build. So I think you have to
modify the main makefile to introduce some "barriers" First compile the
automake parts and then the imake parts (xserver). Be aware that nxcomp and
nxcompshad are required by the other parts. And the server depends on both
and libNX_x11.
If you are wiling to help there's an automake branch that needs some
polishing. It should be findable in the pull-requests. Let me know if you
don't find it.
Xorg uses meson nowadays so the optimum was to restructure everything to
use just that.
Uli
Apteryks ***@***.***> schrieb am So., 19. Mai 2024, 03:11:
… Hm, I tried that, but it didn't seem to make any difference:
make[5]: Leaving directory '/tmp/guix-build-nx-libs-3.5.99.27.drv-0/source/nx-X11/include/GL'
make[4]: Leaving directory '/tmp/guix-build-nx-libs-3.5.99.27.drv-0/source/nx-X11/include'
including in ./config...
make[4]: Entering directory '/tmp/guix-build-nx-libs-3.5.99.27.drv-0/source/nx-X11/config'
including in config/cf...
make[5]: Entering directory '/tmp/guix-build-nx-libs-3.5.99.27.drv-0/source/nx-X11/config/cf'
make[5]: Nothing to be done for 'includes'.
make[5]: Leaving directory '/tmp/guix-build-nx-libs-3.5.99.27.drv-0/source/nx-X11/config/cf'
make[4]: Leaving directory '/tmp/guix-build-nx-libs-3.5.99.27.drv-0/source/nx-X11/config'
including in ./programs...
make[4]: Entering directory '/tmp/guix-build-nx-libs-3.5.99.27.drv-0/source/nx-X11/programs'
including in programs/Xserver...
make[5]: Entering directory '/tmp/guix-build-nx-libs-3.5.99.27.drv-0/source/nx-X11/programs/Xserver'
Makefile:539: *** missing separator. Stop.
make[5]: Leaving directory '/tmp/guix-build-nx-libs-3.5.99.27.drv-0/source/nx-X11/programs/Xserver'
make[4]: *** [Makefile:615: includes] Error 2
make[4]: Leaving directory '/tmp/guix-build-nx-libs-3.5.99.27.drv-0/source/nx-X11/programs'
make[3]: *** [xmakefile:674: includes] Error 2
make[3]: Leaving directory '/tmp/guix-build-nx-libs-3.5.99.27.drv-0/source/nx-X11'
make[2]: *** [Makefile:102: includes] Error 2
make[2]: Leaving directory '/tmp/guix-build-nx-libs-3.5.99.27.drv-0/source/nx-X11'
make[1]: *** [Makefile:148: build-env] Error 2
make[1]: Leaving directory '/tmp/guix-build-nx-libs-3.5.99.27.drv-0/source'
make: *** [Makefile:220: build] Error 2
error: in phase 'build': uncaught exception:
%exception #<&invoke-error program: "make" arguments: ("-j" "180" "PREFIX=/gnu/store/xz96mncfbz47spmdllxyki4hv6vaal4a-nx-libs-3.5.99.27" "ETCDIR_NX=/gnu/store/xz96mncfbz47spmdllxyki4hv6vaal4a-nx-libs-3.5.99.27/etc" "LOCAL_LDFLAGS=-Wl,-rpath=/gnu/store/xz96mncfbz47spmdllxyki4hv6vaal4a-nx-libs-3.5.99.27/lib,-rpath=/gnu/store/xz96mncfbz47spmdllxyki4hv6vaal4a-nx-libs-3.5.99.27/lib/nx/X11" "IMAKE_DEFINES=-DUseTIRPC=1 -DHasParallelMake=1 -DBourneShell=/gnu/store/9vw5slrffp27rzy2i2plnw7xfqjyk7m4-bash-minimal-5.1.16/bin/sh -DProjectRoot=/gnu/store/xz96mncfbz47spmdllxyki4hv6vaal4a-nx-libs-3.5.99.27 -DDefaultUserPath=/gnu/store/xz96mncfbz47spmdllxyki4hv6vaal4a-nx-libs-3.5.99.27/bin" "CONFIG_SHELL=/gnu/store/9vw5slrffp27rzy2i2plnw7xfqjyk7m4-bash-minimal-5.1.16/bin/sh" "SHELL=/gnu/store/9vw5slrffp27rzy2i2plnw7xfqjyk7m4-bash-minimal-5.1.16/bin/sh" "CONFIGURE=/gnu/store/9vw5slrffp27rzy2i2plnw7xfqjyk7m4-bash-minimal-5.1.16/bin/sh ./configure --prefix=/gnu/store/xz96mncfbz47spmdllxyki4hv6vaal4a-nx-libs-3.5.99.27" "VERBOSE=1") exit-status: 2 term-signal: #f stop-signal: #f>
phase `build' failed after 5.9 seconds
command "make" "-j" "180" "PREFIX=/gnu/store/xz96mncfbz47spmdllxyki4hv6vaal4a-nx-libs-3.5.99.27" "ETCDIR_NX=/gnu/store/xz96mncfbz47spmdllxyki4hv6vaal4a-nx-libs-3.5.99.27/etc" "LOCAL_LDFLAGS=-Wl,-rpath=/gnu/store/xz96mncfbz47spmdllxyki4hv6vaal4a-nx-libs-3.5.99.27/lib,-rpath=/gnu/store/xz96mncfbz47spmdllxyki4hv6vaal4a-nx-libs-3.5.99.27/lib/nx/X11" "IMAKE_DEFINES=-DUseTIRPC=1 -DHasParallelMake=1 -DBourneShell=/gnu/store/9vw5slrffp27rzy2i2plnw7xfqjyk7m4-bash-minimal-5.1.16/bin/sh -DProjectRoot=/gnu/store/xz96mncfbz47spmdllxyki4hv6vaal4a-nx-libs-3.5.99.27 -DDefaultUserPath=/gnu/store/xz96mncfbz47spmdllxyki4hv6vaal4a-nx-libs-3.5.99.27/bin" "CONFIG_SHELL=/gnu/store/9vw5slrffp27rzy2i2plnw7xfqjyk7m4-bash-minimal-5.1.16/bin/sh" "SHELL=/gnu/store/9vw5slrffp27rzy2i2plnw7xfqjyk7m4-bash-minimal-5.1.16/bin/sh" "CONFIGURE=/gnu/store/9vw5slrffp27rzy2i2plnw7xfqjyk7m4-bash-minimal-5.1.16/bin/sh ./configure --prefix=/gnu/store/xz96mncfbz47spmdllxyki4hv6vaal4a-nx-libs-3.5.99.27" "VERBOSE=1" failed with status 2
builder for `/gnu/store/zik74m5vcclr9bcs44sfqh46i2rh0rv3-nx-libs-3.5.99.27.drv' failed with exit code 1
build of /gnu/store/zik74m5vcclr9bcs44sfqh46i2rh0rv3-nx-libs-3.5.99.27.drv failed
View build log at '/var/log/guix/drvs/zi/k74m5vcclr9bcs44sfqh46i2rh0rv3-nx-libs-3.5.99.27.drv.gz'.
guix build: error: build of `/gnu/store/zik74m5vcclr9bcs44sfqh46i2rh0rv3-nx-libs-3.5.99.27.drv' failed
real 0m42.514s
user 0m6.178s
sys 0m0.594s
—
Reply to this email directly, view it on GitHub
<#1072 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ABQHBZBVX4SJEFQJGEEHA4DZC734PAVCNFSM6AAAAABELVQQ2OVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMJZGA2DSOJZGI>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
That's tempting but am I bit swamped with things to do at the moment. I'll try to remember revisiting this in the future! |
"Was" makes it sound like the migration of the build system to Meson already happened? Is that so? |
|
No, "was" is subjunctive, like "If I were rich" ;-)
Uli
…On Wed, May 22, 2024 at 1:58 AM Apteryks ***@***.***> wrote:
Xorg uses meson nowadays so the optimum was to restructure everything to
use just that.
"Was" makes it sound like the migration of the build system to Meson
already happened? Is that so?
—
Reply to this email directly, view it on GitHub
<#1072 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ABQHBZCFZI4T3U4SOUZODDTZDPNTTAVCNFSM6AAAAABELVQQ2OVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMRTGYYTCOBSHA>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
|
Ah, I see :-) I guess I'll look at that Autotools branch at some point; it'd be a nice improvement over a build system whose default assumption is that |
|
… On Wed, May 22, 2024 at 2:33 PM Apteryks ***@***.***> wrote:
Ah, I see :-) I guess I'll look at that Autotools branch at some point;
it'd be a nice improvement over a build system whose default assumption is
that make doesn't support parallel builds ^^'.
—
Reply to this email directly, view it on GitHub
<#1072 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ABQHBZA65DCW5IQUFD7P6QLZDSGAJAVCNFSM6AAAAABELVQQ2OVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMRUGY3TSNRRGM>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Hi,
The build of
nx-libsappears to suffer from non-deterministic build failures when parallelized (make -jN). Here's an example:It'd be nice if it worked normally. I also not that parallel build is disabled in the Debian rules file (
--no-parallel).The text was updated successfully, but these errors were encountered: