panels

Panels

All panels where ordered in one go from interglas.se. They were unable to accommodate measurements finer than whole millimeters, so I needed to adjust the DXFs from the official repository.

This is where the adjusted drawings live. The original DXFs are from VoronDesign/Voron-Trident.

Interglas also wanted PDF drawings with annotated measurements. I might have gone a bit overboard.

The Order

This is the order as I sent it to interglas.

• Three sheets of laser-cut acrylic.
  1. Bottom (369x369, 3PMMACl101) — 210 SEK.
  2. Deck (369x369, 3PMMA1750PINK) — 333 SEK.
  3. Rear (383x473, 3PMMA1750PINK) — 333 SEK.
• Five sheets of cut-to-measure acrylic.
  1. 2 x 4CE03CUT, 191x473 (two doors) — 256 SEK.
  2. 2 x 4CE03CUT, 383x473 (two sides) — 336 SEK.
  3. 1 x 4CE03CUT, 383x383 (one top) — 136 SEK.

Shipping was 179 SEK.

Total order including 25% VAT was ~1800 SEK.

Notes

• Some of the original DXFs had odd measurements such as 139.9 and 140.1 — this is probably an error.
• I managed to adjust the measurements of all panels in-place except for the bottom, which I had to redo entirely. I was in a hurry so the bottom panel is the one with the widest margins.