Cipl Flasher Insta Brick Fat PSP

[GoogleCodeExporter]

What steps will reproduce the problem?
1. Install PRO CFW (above 6.20)
2. Install Cipl flasher.
3. Restart PSP.

What is the expected output? What do you see instead?
It get full bricked. I have pandora and i tried alot of times, becouse the fast 
recovery annoys me. It full bricks, then i unbrick with pandora and if i do the 
stept above the same happens.

What version of the product are you using? On what operating system?
Tested: PRO-B8 6.39, PRO-B9 6.60, PRO-B10 Fix 1 6.60, PRO-C fix 3 6.60, PRO-C2 
6.60. PSP is 1001 with TA-81 motherboard.

Please provide any additional information below.
The only thing working is the 6.20 bootloader. I really wish this to be fixed. 
Also there is a posibility this being a psp problem, but doubt it becouse 6.60 
ME works (PRO BETTER THAN ME!)

Original issue reported on code.google.com by [email protected] on 5 Apr 2013 at 3:12

[GoogleCodeExporter]

It might not work because you used ME before. Installed the Cipl flasher on my 
PSP1004 and many more other Pandorable units without any problems. Did you 
remember to disable all plugins before using cipl flasher ? You probably have 
some incompatible ones enabled.

Original comment by piotrekhenry on 6 Apr 2013 at 10:04

[GoogleCodeExporter]

It isin't the plugins, i checked+ i dint have any and dint know they exist when 
i was testing. I guess il have to go with LCFW... Maybe there is a way to load 
up the firmware wiwhout cipl flasher?

Original comment by [email protected] on 6 Apr 2013 at 2:17

[GoogleCodeExporter]

If you used an older, pandorable CFW like 5.00 m33-6 - It already included a 
CIPL and it still remoains on your MMS. You might have to use your Pandora and 
MMS to install a fresh copy of 5.00 OFW (not CFW), format your MS (or use a 
different one) to remove the MMS CIPL, update to 6.xx OFW and then instal the 
appropriate 6.xx PRO-C with the proper CIPL.

Original comment by piotrekhenry on 9 Apr 2013 at 11:07

[GoogleCodeExporter]

flash installed 4.01 ofw, formated ms, updated to 6.60 ofw, installed pro-c2, 
install cipl flasher, reboot psp, fully bricked. :(

maybe it could be becouse i dont use a battery? (ac cord only)

Original comment by [email protected] on 14 Apr 2013 at 7:14

[GoogleCodeExporter]

It's impossible to Pandorise a PSP-100x without a battery. Using a recovery 
flasher doesn't remove everything from flash that might cause this issue from 
the PSP's flash, only overwrites the existing data. If you didn't need the 
Pandora battery - then your PSP was not bricked. Use a pandora Battery to 
completely format the flash of your Fat before installing OFW.

Original comment by piotrekhenry on 15 Apr 2013 at 12:53

[GoogleCodeExporter]

sorry, i meant i dont have a normal battery, so i completely formatted the 
flash installed ofw with pandora did as always and still bricked... i guess its 
just it

Original comment by [email protected] on 27 Apr 2013 at 12:21

[GoogleCodeExporter]

Actually, instead il use the bootloader and version.txt, ima fixed, for now

Original comment by [email protected] on 30 Apr 2013 at 7:07

[GoogleCodeExporter]

I´d similar problem today and i solved it.
But in my case, the real problem wasn´t the cipl flasher. I forgot to return 
the pandora battery to normal state, after do this, everything worked.

Original comment by [email protected] on 9 May 2013 at 3:49