Option to open the telemetry screen on startup based on the current selected model

[nikbg3]

Is there an existing issue for this feature request?

• I have searched the existing issues

Is your feature request related to a problem?

I sometimes forget to open the telemetry when I start up the radio, and after flying a model, it's usually the first thing I check once I take off my goggles.

Describe the solution you'd like

Add an option in the model settings to enable telemetry by default when powering on the radio.

Describe alternatives you've considered

1. Manually pressing the button each time at power-up.
2. An audio reminder to check the button manually each time I start up, configurable at the model level.

Additional context

I am using a BW Radiomaster Boxer radio with the latest version. I am not certain if it is possible on colored radios

[pfeerick]

See what you think of #5589

…

On Wed, 23 Oct 2024, 5:15 am Nikolay, ***@***.***> wrote: Is there an existing issue for this feature request? - I have searched the existing issues Is your feature request related to a problem? I sometimes forget to open the telemetry when I start up the radio, and after flying a model, it's usually the first thing I check once I take off my goggles. Describe the solution you'd like Add an option in the model settings to enable telemetry by default when powering on the radio. Describe alternatives you've considered 1. Manually pressing the button each time at power-up. 2. An audio reminder to check the button manually each time I start up, configurable at the model level. Additional context I am using a BW Radiomaster Boxer radio with the latest version. I am not certain if it is possible on colored radios — Reply to this email directly, view it on GitHub <#5634>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABJ66KJKINNMNPFWQD2PNI3Z42P4JAVCNFSM6AAAAABQNGHTL2VHI2DSMVQWIX3LMV43ASLTON2WKOZSGYYDMMRXGAYDCNA> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[nikbg3]

Thank you, Peter! You are correct. This can be marked as a duplicate. I apologize that I was not able to find the one in question despite I tried to search it.

[nikbg3]

duplicate of #5589

[pfeerick]

That feature is present in nightly firmware, so if you are game enough you can try it out now ;) Otherwise, it will be part of v2.11

…

On Wed, 23 Oct 2024, 7:03 am Nikolay, ***@***.***> wrote: Closed #5634 <#5634> as not planned. — Reply to this email directly, view it on GitHub <#5634 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABJ66KLDB64OQZUP3YEL4LDZ424QTAVCNFSM6AAAAABQNGHTL2VHI2DSMVQWIX3LMV45UABCJFZXG5LFIV3GK3TUJZXXI2LGNFRWC5DJN5XDWMJUG44TENZYHEZDMMA> . You are receiving this because you commented.Message ID: ***@***.***>

[nikbg3]

I have tried it on my Boxer and it it covers this case with a One logic rule. Thank you! I will roll back to latest stable before flying just in case and wait for the official :)

[3djc]

If you installed a 2.11 and come back to 2.10, you can likely corrupt your model/radio data

[nikbg3]

Thank you for the reminder! I have full backup of the old firmware and also models :) I am a bit cautious because I have failed-saved previously and almost lost the gear because of a faulty script (that I have written 😁)