Image for 6820v3 / 6820v2 wrong image/ProductID

[phil11c]

Hey,

i tried to build a new image for my 6820v3 and 6820v2, but the resulting images is always named 7690_07.62.all_freetz-ng-....
push_firmware shows warning:

freetz@freetz:~/freetz-ng$ tools/push_firmware

 * Analyzing 'images/7690_07.62.all_freetz-ng-24949M-82612e4652_20241207-113937.image' ...
 * Product: Fritz_Box_HW285 (FRITZ!Box 7690)
 * Using dos2unix binary: tools/dos2unix
 * Using tar binary: tools/tar-gnu
 * Using ftp binary: tools/ftp
 * Target host: 192.168.178.1
 * Outgoing IP: 192.168.178.3
 * Flash mode: fit-boot
 * Allowed memory size: 1024 MB
 * Designated linux_fs_start: <other>

 !!! WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING !!!
 !!!  THERE IS NO WARRANTY AT ALL !!! USE AT YOUR OWN RISK   !!!

 * Are you sure, that you want to flash this file to the device?
   images/7690_07.62.all_freetz-ng-24949M-82612e4652_20241207-113937.image
   Proceed? (y/[n]) y

 * You should now reboot your box (192.168.178.1). Waiting for shut down.
   Switch off, if reboot is not detected because it happens too quickly.
   Some newer bootloader versions allow to flash on power-cycle only.

 * No reply from box, assuming switch-off or restart. Trying to re-detect box.
   Waiting ............................... found!

 * Reading 'env' file to /tmp/freetz_env_0hF
Connected to 192.168.178.1.
220 ADAM2 FTP Server ready
331 Password required for adam2
230 User adam2 successfully logged in
Remote system type is AVM.
Debugging on (debug=1).
---> TYPE I
200 Type set to BINARY
---> SYST
215 AVM EVA Version 1.10420 0x0 0x640D
---> MEDIA SDRAM
200 Media set to MEDIA_SDRAM
local: /tmp/freetz_env_0hF remote: env
---> PASV
227 Entering Passive Mode (192,168,178,1,12,28)
---> RETR env
150 Opening BINARY data connection
Timeout!!!!!!!!!!!!!!!!!!
   ProductID:            Fritz_Box_HW254
   HWRevision:           254
   HWSubRevision:        1
   memsize:              0x08000000
   linux_fs_start:       1

Error, ProductID of image (HWR285) does not match device (HWR254)!
Type 'c' to ignore and continue:

Tried with Debian 12 x64 (up2date) with repo freetz-ng 24949M-82612e4652 master 2024-12-06.
NO settings in config, except choosing hardware series 4 and hardware type 6820v2 / 6820v3.

Am i doing sth. wrong?
Any ideas?

[Conan179]

Can you upload your .config?

[phil11c]

Yes, sure.
6820.config.txt

[fda77]

And you are sure you took the newly created file?

[phil11c]

sure.
Deleted everything, made a fresh clone of freetz-ng repo and started make menuconfig + make afterwards.

Tried it x times. Debian Container, Debian VM, OVS provided by Gismotro.....

~/freetz-ng$ ls -l images/
total 42284
-rw-r--r-- 1 freetz freetz 43294720 Dec  7 11:39 7690_07.62.all_freetz-ng-24949M-82612e4652_20241207-113937.image
lrwxrwxrwx 1 freetz freetz       64 Dec  7 11:39 latest.image -> 7690_07.62.all_freetz-ng-24949M-82612e4652_20241207-113937.image

just make is enough or do i have to specify the created config file (there is only this one).

[phil11c]

any idea?
am i doing sth. wrong?

[fda77]

i have no idea what has to be done to get this result!

[LizenzFass78851]

I built the config from comment as a test and the file I get is both the correct name and the correct hwr.

builduser@2f5f7530c940:/mnt/freetz-ng$ ls -la ./images/ && echo -------------------- && cat /etc/os-release && echo -------------------- && cat ./build/modified/firmware/var/version 
total 22332
drwxrwxrwx+  2 builduser builduser     4096 Dec 18 15:27 .
drwxr-xr-x+ 19 builduser root          4096 Dec 18 15:27 ..
-rw-r--r--   1 builduser builduser 22855680 Dec 18 15:27 6820v3_07.59.ger_freetz-ng-25009M-5e7b38c54a_20241218-152740.image
lrwxrwxrwx   1 builduser builduser       66 Dec 18 15:27 latest.image -> 6820v3_07.59.ger_freetz-ng-25009M-5e7b38c54a_20241218-152740.image
--------------------
NAME="Ubuntu"
VERSION="20.04.6 LTS (Focal Fossa)"
ID=ubuntu
ID_LIKE=debian
PRETTY_NAME="Ubuntu 20.04.6 LTS"
VERSION_ID="20.04"
HOME_URL="https://www.ubuntu.com/"
SUPPORT_URL="https://help.ubuntu.com/"
BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/"
PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy"
VERSION_CODENAME=focal
UBUNTU_CODENAME=focal
--------------------
FIRMWAREVERSION=254.07.59,,116421,

builduser@79528c0f42db:/mnt/freetz-ng$ ls -la ./images/ && echo -------------------- && cat /etc/os-release && echo -------------------- && cat ./build/modified/firmware/var/version 
total 22324
drwxrwxrwx+  2 builduser builduser     4096 Dec 18 15:42 .
drwxr-xr-x+ 19 builduser root          4096 Dec 18 15:41 ..
-rw-r--r--   1 builduser builduser 22845440 Dec 18 15:42 6820v3_07.59.ger_freetz-ng-25009M-5e7b38c54a_20241218-154158.image
lrwxrwxrwx   1 builduser builduser       66 Dec 18 15:42 latest.image -> 6820v3_07.59.ger_freetz-ng-25009M-5e7b38c54a_20241218-154158.image
--------------------
PRETTY_NAME="Ubuntu 22.04.5 LTS"
NAME="Ubuntu"
VERSION_ID="22.04"
VERSION="22.04.5 LTS (Jammy Jellyfish)"
VERSION_CODENAME=jammy
ID=ubuntu
ID_LIKE=debian
HOME_URL="https://www.ubuntu.com/"
SUPPORT_URL="https://help.ubuntu.com/"
BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/"
PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy"
UBUNTU_CODENAME=jammy
--------------------
FIRMWAREVERSION=254.07.59,,116421,

tested using the docker container ghcr.io/freetz-ng/firmware and recreated the same container based on Ubuntu 22.04. (When recreated the same container based on Ubuntu 24.04, there is a "fixing permissions" error when running make menuconfig)

[phil11c]

Yes, you are right.
btw.: giving the configfile real name instead of ".config" does not work. My fault, did not know that. sorry for wasting your time...

[fda77]

ghcr.io/freetz-ng/firmware (and the other 2 docker images) are used by the github actions like https://github.com/Freetz-NG/freetz-ng/actions/workflows/make_freetz.yml

i dont use docker by myself, but "pfichtner-freetz" should be better https://github.com/Freetz-NG/freetz-ng#requirements