Skip to content

Latest commit

 

History

History
121 lines (97 loc) · 5.45 KB

README.md

File metadata and controls

121 lines (97 loc) · 5.45 KB

Linux kernel tree with L4S patches

This linux kernel repository contains the various patches developed in the context of the L4S experiment.

Namely:

  • The dualQ coupled AQM (see branch sch_dualpi2, as well as the iproute2 repository
  • An implementation of Accurate ECN (see branch AccECN-full)
  • The base implementation of TCP Prague (see branch tcp_prague)
  • ECT(1) enabled DCTCP
  • ECT(1) enabled BBR v2 (from v2alpha branch in BBR v2 repo)

Installation (debian derivatives)

wget https://github.com/L4STeam/linux/releases/download/testing-build/l4s-testing.zip
unzip l4s-testing.zip
sudo dpkg --install debian_build/*
sudo update-grub  # This should auto-detect the new kernel
# You can optionally set newly installed kernel as the default, e.g., editing GRUB_DEFAULT in /etc/default/grub
# You can now reboot (and may have to manually select the kernel in grub)
# Be sure that the newly installed kernel is successfully used, e.g., checking output of
uname -r
# Be sure to ensure the required modules are loaded before doing experiments, e.g.,
sudo modprobe sch_dualpi2
sudo modprobe tcp_prague

This branch (testing)

This branch accumulates all patches into a single kernel tree, in order to ease up testing.

You can grab a pre-built debian archive of the kernel image and headers through the latest actions artifacts. The tip of the master branch is also always build/packaged (alongside iproute2) and attached as pre-release artifact for the testing-build tag.

Compilation

Compile it as any kernel, enabling the dualpi2 AQM and TCP Prague in the config.

Assuming you compile this on a similar machine that where you intend to run the kernel (e.g., architecture, distribution, ...):

# Try to use existing kernel config
if [ -f /proc/config.gz ]; then
    zcat proc/config.gz > .config
    make olddefconfig
else if [ -f "/boot/config-$(uname -r)" ]; then
    cp "/boot/config-$(uname -r)" .config
    make olddefconfig
else
    make defconfig
fi

# Enable TCP Prague and dualpi2
scripts/config -m TCP_CONG_PRAGUE
scripts/config -m NET_SCH_DUALPI2
# Optionally enable DCTCP and BBR v2
scripts/config -m TCP_CONG_DCTCP
scripts/config -m TCP_CONG_BBR2

# Build the kernel
make -j$(nproc) LOCALVERSION=-prague-1
# Alternatively, you can generate *.deb with
# BUILD_NUMBER=${BUILD_NUMBER:-1} make \
#	-j$(nproc) bindeb-pkg \
#	LOCALVERSION=-prague-${BUILD_NUMBER} \
#	KDEB_PKGVERSION=1
# see the output of `make help` to generate rpms/...

# Install it on the current system if applicable
make install
make modules_install

# Update your bootloader to list the new kernel
update-grub
# You may then want to udpate the GRUB_DEFAULT variable
# in /etc/default/grub to the newly installed kernel

If you intend to use non-default parameters for dualpi2, make sure to also build the patched iproute2 , e.g.,

git clone https://github.com/L4STeam/iproute2.git && cd iproute2
./configure
make
tc/tc qdisc replace dev eth0 root dualpi2 ...
# You can optionally install (!potentially overwrite) the new
# iproute2 utils with `make install`

Performing experiments

While dualpi2 can work with DCTCP, DCTCP suffers from a few unfortunate interactions with GSO/pacing/..., resulting in under-utilization.

As a result, we advice you to use tcp_prague which currently has basic fixes to those limitations. Note that this might still under-perform in heavily virtualized settings, as scheduling becomes less reliable.

# some preparations for having better paced traffic and reduce bursts for each network interface $NETIF that sends L4S traffic
# Avoid processing 64K packets in the kernel, which will send those packets in a burst independent of the pacing (lro only for newer NICS and kernels that support it):
sudo ethtool -K $NETIF tso off gso off gro off lro off
# fq qdisc needs to be configured on clients and server NICS (instead of fq_codel; fq is the only one that supports the pacing)
sudo tc qdisc replace dev $NETIF root handle 1: fq limit 20480 flow_limit 10240
# Enable Accurate ECN (only needed for BBR2 and DCTCP, not needed for Prague)
sysctl -w net.ipv4.tcp_ecn=3
# set Prague congestion control system wide (or in the application with socket options)
sysctl -w net.ipv4.tcp_congestion_control=prague

Accurate ECN negotiation

Prague attempts to negotiate Accurate ECN automatically. Note that, at the moment, Accurate ECN must be enabled on both ends of a connection in order it with DCTCP or BBR v2.

Among 3 different congestion control algorthms (net.ipv4.tcp_congestion_control=prague/bbr2/cubic) and 4 differnet ECN configurations (net.ipv4.tcp_ecn=3/1/2/0), the negotiated ECN modes between server and client are as follows: Note that the negotiated ECN modes can be either Accurate ECN, Classic ECN, or Non-ECN. image

In addition, the following congestion control algorithm and ECN fields of IP header (ECN(1)/ECN(0)/Not ECT) is used when server as Data Sender. Note thtat prague-reno is the current fallback mode of TCP Prague. image

Also, when client is Data Sender, the following congestion cotnrol algorithm and ECN fields of IP header is applied. image