Skip to content

Latest commit

 

History

History
24 lines (15 loc) · 538 Bytes

readme.md

File metadata and controls

24 lines (15 loc) · 538 Bytes
Raw

Installation

Arduino

  1. Flash the Arduino.ino sketch on the Arduino.

Camera setup

The camera needs to be set in the right mode before opening the software:

  1. Open SpinView software.
  2. Select the camera.
  3. In Acquisition Control set VideoMode to *Mode0".

Software

  1. Connect the Arduino and the camera to the Raspberry.
  2. Start Dual_Gui.

Troubleshooting

If the software fails to start the camera or the Arduino are not detected:

  1. Check the camera mode.
  2. Reset the Arduino and restart the Raspberry.