mkdir colcon_ws
mkdir colcon_ws/src
cd colcon_ws/src
git clone https://github.com/picknikrobotics/generate_parameter_library.git
cd ..
colcon build
source install/setup.bash
ros2 run generate_parameter_library_example test_node --ros-args --params-file src/generate_parameter_library/example/config/implementation.yaml
You should see an output like this:
[INFO] [1656018676.015816509] [admittance_controller]: Control frame is: 'ee_link'
Run the following:
ros2 param list
You should see:
/admittance_controller:
admittance.damping_ratio
admittance.mass
admittance.selected_axes
admittance.stiffness
chainable_command_interfaces
command_interfaces
control.frame.external
control.frame.id
enable_parameter_update_without_reactivation
fixed_array
fixed_string
fixed_string_no_default
fixed_world_frame.frame.external
fixed_world_frame.frame.id
ft_sensor.filter_coefficient
ft_sensor.frame.external
ft_sensor.frame.id
ft_sensor.name
gravity_compensation.CoG.force
gravity_compensation.CoG.pos
gravity_compensation.frame.external
gravity_compensation.frame.id
interpolation_mode
joints
kinematics.alpha
kinematics.base
kinematics.group_name
kinematics.plugin_name
kinematics.plugin_package
kinematics.tip
one_number
pid.elbow_joint.d
pid.elbow_joint.i
pid.elbow_joint.p
pid.rate
pid.shoulder_lift_joint.d
pid.shoulder_lift_joint.i
pid.shoulder_lift_joint.p
pid.shoulder_pan_joint.d
pid.shoulder_pan_joint.i
pid.shoulder_pan_joint.p
pid.wrist_1_joint.d
pid.wrist_1_joint.i
pid.wrist_1_joint.p
pid.wrist_2_joint.d
pid.wrist_2_joint.i
pid.wrist_2_joint.p
pid.wrist_3_joint.d
pid.wrist_3_joint.i
pid.wrist_3_joint.p
qos_overrides./parameter_events.publisher.depth
qos_overrides./parameter_events.publisher.durability
qos_overrides./parameter_events.publisher.history
qos_overrides./parameter_events.publisher.reliability
scientific_notation_num
state_interfaces
three_numbers
three_numbers_of_five
use_feedforward_commanded_input
use_sim_time
All parameter are automatically declared and callbacks are setup by default. You can set a parameter by typing:
ros2 param set /admittance_controller control.frame.id new_frame
You should see:
[INFO] [1656019001.515820371] [admittance_controller]: New control frame parameter is: 'new_frame'
Congratulations, you updated the parameter!
If you try to set a parameter that is read only, you will get an error. Running the following
ros2 param set /admittance_controller command_interfaces ["velocity"]
will result in the error
Setting parameter failed: parameter 'command_interfaces' cannot be set because it is read-only
Running the following
ros2 param describe /admittance_controller admittance.damping_ratio
will show a parameter's description
Parameter name: admittance.damping_ratio
Type: double array
Description: specifies damping ratio values for x, y, z, rx, ry, and rz used in the admittance calculation. The values are calculated as damping can be used instead: zeta = D / (2 * sqrt( M * S ))
Constraints:
Min value: 0.1
Max value: 10.0
If you try to set a value out of the specified bounds,
ros2 param set /admittance_controller admittance.damping_ratio [-10.0,-10.0,-10.0,-10.0,-10.0,-10.0]
you will get the error
Setting parameter failed: Value -10.0 in parameter 'admittance.damping_ratio' must be within bounds [0.1, 10.0]
If you try to set a vector parameter with the wrong length,
ros2 param set /admittance_controller admittance.damping_ratio [1.0,1.0,1.0]
you will get the error
Setting parameter failed: Length of parameter 'admittance.damping_ratio' is 3 but must be equal to 6
If you try to load a yaml file with missing required parameters
ros2 run generate_parameter_library_example test_node --ros-args --params-file src/generate_parameter_library/example/config/missing_required.yaml
you will get the error
terminate called after throwing an instance of 'rclcpp::exceptions::ParameterUninitializedException'
what(): parameter 'fixed_string_no_default' is not initialized
[ros2run]: Aborted