Skip to content

Latest commit

 

History

History
35 lines (22 loc) · 1.33 KB

README-en.md

File metadata and controls

35 lines (22 loc) · 1.33 KB
Raw

NetIO: Network throughput test tool

1 Introduction

NetIO A tool for network performance testing on OS/2 2.x, Windows, Linux and Unix. It uses TCP/UDP to test network net throughput using data packets of different sizes.

RT-Thread currently supports NetIO TCP server.

2. Use

2.1 Start NetIO server

You need to use Finsh/MSH commands on RT-Thread to start the NetIO server. The general effect is as follows:

msh />netio_init
NetIO server start successfully
msh />

2.2 Install NetIO-GUI test software

The installation file is located in /tools/netio-gui_v1.0.4_portable.exe, this is a green software, the installation is actually a process of unzipping, just unzip it to a new folder.

2.3 Perform NetIO testing

Open the newly installed NetIO-GUI software and configure it as follows:

  • Open NetIO-GUI.exe;
  • Select Client-Mode mode, TCP protocol;
  • Fill in the IP address of the NetIO server. You can use the ifconfig command to view under MSH of RT-Thread;
  • Click Start measure to start the test (before the test, make sure that the server can be pinged by the PC);
  • Wait for the test to end. After the end, the receiving and sending test results corresponding to different data packets will be displayed in the result area.

netio_tested