Hihat

[loszelos]

Hello,

i have problem with hihat pedal. I tried build both schematic, but it's not working fine. Just now I'm quite lost.

first
https://open-e-drums.tumblr.com/post/186865919134/tcrt5000-with-roland-td-10

Is right connection ? It's curious that signal cable is connected to the ground. If I did that, the signal is still enabled and sended. If I switch them, after that is better and it's sensitive.

second.

https://open-e-drums.tumblr.com/post/171265375249/optical-hi-hat-controller

If another one has a different schematic, show me.

I also ask, if is possible in library use A3 pin for hihat pedal and for another mux?

I used EZDrummer nad set in setting roland.

In code I used MUX
hihat.HHMUX();
hihatPedal.hihatControlMUX();

Another question is, which note is right for open and close for pedal?
I used the same as for hihat. 42 close and 46 open.
And I cannot find right configuration for other parameters, like scan start / end, sensitivity and other.

Also If I tried to press pedal, in one time is still fast sending signal in loop. It's not moving sensitivity.

Is anyone who is done with that and have facebook / messenger / whatsapp for discussion? Thanks a lot ! This is the last thing of my drums and I'm quite sad that it's not working :( ...

[zhdan88vadim]

Hi
May be is easy way to buy this module.

Than you can try to use this example.

There are many comments.
I dont configure my hihat but I will use that way to undestand how it work.