Releases: UltimateHackingKeyboard/firmware
Releases · UltimateHackingKeyboard/firmware
8.1.1
Device Protocol: 4.2.0 | Module Protocol: 4.0.0 | User Config: 4.0.0 | Hardware Config: 1.0.0
- Lock layers every time when double-tapping their layer switcher keys, regardless of how many times the layer switcher key was tapped before.
- Only lock layers via double-tapping if the second tap gets released within 100ms.
8.1.0
Device Protocol: 4.2.0 | Module Protocol: 4.0.0 | User Config: 4.0.0 | Hardware Config: 1.0.0
- Enable left-half watchdog in reinit mode which seems to prevent freezes.
- Slow down main bus I2C baud rate to 30kHz when BusPal is on to make firmware transfer more robust.
- Implement UsbCommandId_GetSlaveI2cErrors.
DEVICEPROTOCOL:MINOR - Implement UsbCommandId_SetI2cBaudRate.
DEVICEPROTOCOL:MINOR - Implement DevicePropertyId_CurrentKbootCommand.
DEVICEPROTOCOL:MINOR - Implement DevicePropertyId_I2cMainBusBaudRate.
DEVICEPROTOCOL:MINOR - Implement DevicePropertyId_Uptime.
DEVICEPROTOCOL:MINOR
8.0.1
8.0.0
Device Protocol: 4.1.0 | Module Protocol: 4.0.0 | User Config: 4.0.0 | Hardware Config: 1.0.0
- Make the modules transfer the module protocol version and firmware version composed of a major, a minor and a patch number.
MODULEPROTOCOL:MAJOR - Query module key count and pointer count in separate messages instead of a combined message for improved clarity.
MODULEPROTOCOL:MAJOR - Add new UsbCommand_GetModuleProperties() device protocol command.
DEVICEPROTOCOL:MINOR
7.0.0
Device Protocol: 4.0.0 | Module Protocol: 3.0.0 | User Config: 4.0.0 | Hardware Config: 1.0.0
- Make UsbCommand_JumpToModuleBootloader() more robust by not making it dependent on the state of the module driver.
- Don't make horizontal scrolling and vertical scrolling affect each other.
- Expose version numbers via the get property interface.
DEVICEPROTOCOL:MINOR - Add DevicePropertyId_ConfigSizes.
DEVICEPROTOCOL:MINOR - Remove DevicePropertyId_HardwareConfigSize and DevicePropertyId_UserConfigSize.
DEVICEPROTOCOL:MAJOR
6.0.0
Device Protocol: 3.0.0 | Module Protocol: 3.0.0 | User Config: 4.0.0 | Hardware Config: 1.0.0
- Change the value of almost every Device Protocol commands because there were unused intervals between them.
DEVICEPROTOCOL:MAJOR - Disable LED display icons by default.
- Update LED brightness levels upon applying the configuration.
5.0.1
Device Protocol: 2.0.0 | Module Protocol: 3.0.0 | User Config: 4.0.0 | Hardware Config: 1.0.0
- Make key presses continue to emit scancodes even if a USB interface (typically the mouse interface) is not polled by the host anymore.
- Make scrolling always immediately react to keypresses regardless of the previous internal scroll state.
5.0.0
Device Protocol: 2.0.0 | Module Protocol: 3.0.0 | User Config: 4.0.0 | Hardware Config: 1.0.0
- Move pointerRole from keymaps to module configurations as pointerMode. Add angularShift, modLayerPointerFunction, fnLayerPointerFunction, and mouseLayerPointerFunction to module configurations.
USERCONFIG:MAJOR
4.0.0
Device Protocol: 2.0.0 | Module Protocol: 3.0.0 | User Config: 3.0.0 | Hardware Config: 1.0.0
- Implement mouse movement and scrolling deceleration and acceleration.
- Toggle layers upon double tapping their keys. Make the double tap timeout configurable.
- Make the parser read additional user configuration properties: userConfigMajorVersion, userConfigMinorVersion, userConfigPatchVersion, doubleTapSwitchLayerTimeout, iconsAndLayerTextsBrightness, alphanumericSegmentsBrightness, keyBacklightBrightness, mouseMoveInitialSpeed, mouseMoveAcceleration, mouseMoveDeceleratedSpeed, mouseMoveBaseSpeed, mouseMoveAcceleratedSpeed, mouseScrollInitialSpeed, mouseScrollAcceleration, mouseScrollDeceleratedSpeed, mouseScrollBaseSpeed, mouseScrollAcceleratedSpeed.
USERCONFIG:MAJOR
3.0.0
Device Protocol: 2.0.0 | Module Protocol: 3.0.0 | User Config: 2.0.0 | Hardware Config: 1.0.0
- Detect the use of USB interfaces and only wait for the ones that are actually used by the host.
- Implement key debouncer.
- Use the menu key in the factory keymap.
- Make pressing the reset button revert to the factory preset.
- Revert to the factory default state when the reset button is pressed upon firmware startup. Display FTY on the display in this case.
- Make the LED display show the abbreviation of the current keymap even when it gets reinitialized by the I2C watchdog.
- Swap SlaveCommand_RequestKeyStates and SlaveCommand_JumpToBootloader, thereby making SlaveCommand_JumpToBootloader the lower number because it's more essential and shouldn't change in the future.
MODULEPROTOCOL:MAJOR - Suppress pressed keys upon layer switcher key release.
- Handle secondary role modifiers and layer switchers.
- Make UsbCommand_JumpToSlaveBootloader expect a slave slot id instead of a uhkModuleDriverId.
DEVICEPROTOCOL:MAJOR - Set UsbResponse_InvalidCommand upon encountering with an invalid USB command.
DEVICEPROTOCOL:MINOR - Remove UsbCommandId_ReadMergeSensor now that it can be queried via UsbCommandId_GetKeyboardState.
DEVICEPROTOCOL:MAJOR - Make the getAdcValue and getDebugInfo USB commands utilize the first byte of the response to provide status as dictated by the UHK protocol.
DEVICEPROTOCOL:MAJOR - Switch keymap only upon keypress.
- Handle layer toggle actions.
- Keep the active layer active even if another layer switcher key gets pressed while holding it.
- Read the new UserConfig.userConfigLength user config field.
USERCONFIG:MAJOR - Change Ctrl and Alt back according to the official UHK factory keymap.
- Update system keyboard HID descriptor which doesn't make the pointer go to the top left corner on OSX anymore.
- Scan keyboard matrices in a more efficient manner from timer interrupts instead of the main loop.
- Add UsbCommand_SendKbootCommand.
DEVICEPROTOCOL:MINOR - Make the reenumerate USB command accept a timeout value.
DEVICEPROTOCOL:MINOR - Make the config parser read the device name.
USERCONFIG:MAJOR - Update release file format containing device and module directories and hex files instead of srec.
- Remove obsolete ARM GCC build files.