From 728d26c41133193f313699c0eb87b0c591ca3d9b Mon Sep 17 00:00:00 2001 From: faucherc Date: Mon, 11 Nov 2024 22:14:52 -0500 Subject: [PATCH 1/2] MPCNC Primo to LR4 hardware differences --- docs/lowrider/index.md | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/docs/lowrider/index.md b/docs/lowrider/index.md index a261970c2..501142ce7 100644 --- a/docs/lowrider/index.md +++ b/docs/lowrider/index.md @@ -287,7 +287,14 @@ This is what is needed for a 4' x 8' (1.2m x 2.4m) build. You will need more or |QTY |Description |Notes | |-----|------------------------|-----------------------------------------------| - + |61 |M3 x 10mm | | + |2 |M2.5 x 12mm | | + |1 |Endstops | | + |2 |145mm+ Leadscrews | | + |1 |Coupler |8mm to 5mm | + |4 |Linear rails MGN |MGN12H 150mm | + |set |XZ Plates | | + |~8m |10mm belt |Use the calc for accurate length for your build | From 7dc50dc08c037479fc8406ec55b11ac10cf1990a Mon Sep 17 00:00:00 2001 From: RyanZ Date: Tue, 19 Nov 2024 09:36:36 -0800 Subject: [PATCH 2/2] add some primo to lr4 info --- docs/lowrider/index.md | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/docs/lowrider/index.md b/docs/lowrider/index.md index 501142ce7..b35c18184 100644 --- a/docs/lowrider/index.md +++ b/docs/lowrider/index.md @@ -97,6 +97,8 @@ filaments With great rigidity and added heat resistance are PET-GF/CF and PC-GF/ 3 walls rectilinear or cubic infill for most parts. Thicker layers, since these are large parts, no more than 80% nozzle diameter to layer thickness ratio to keep steep walls working. +200mmx200mmx190mm available build volume is needed to print these parts. + !!! info @@ -280,7 +282,7 @@ This is what is needed for a 4' x 8' (1.2m x 2.4m) build. You will need more or |~8m |10mm belt |Use the calc for accurate length for your build | * 5 driver board is reccomended - * Updating to a 24v Power supply is also reccomended. + * Updating to a 24v Power supply is also reccomended if you only have a 12V. --- **MPCNC Primo to LR4 hardware differences for converting your build** @@ -289,13 +291,16 @@ This is what is needed for a 4' x 8' (1.2m x 2.4m) build. You will need more or |-----|------------------------|-----------------------------------------------| |61 |M3 x 10mm | | |2 |M2.5 x 12mm | | - |1 |Endstops | | - |2 |145mm+ Leadscrews | | + |1 |Endstop | | + |1 |145mm+ Leadscrews |You can use the one you have and add one | |1 |Coupler |8mm to 5mm | |4 |Linear rails MGN |MGN12H 150mm | |set |XZ Plates | | |~8m |10mm belt |Use the calc for accurate length for your build | - + + * 5 driver board is reccomended + * Updating to a 24v Power supply is also reccomended if you only have a 12V. + --- ### Table