Skip to content
This repository has been archived by the owner on Oct 25, 2022. It is now read-only.

Booting an image with ostree and encrypted-storage does not work #1

Open
mferland opened this issue Mar 19, 2020 · 1 comment
Open

Booting an image with ostree and encrypted-storage does not work #1

mferland opened this issue Mar 19, 2020 · 1 comment

Comments

@mferland
Copy link

Compiled an image with: WRTEMPLATE ?= "feature/ntp feature/edac feature/ostree feature/docker feature/kubernetes feature/efi-secure-boot feature/tpm2 feature/encrypted-storage"

Cleared the TPM from the BIOS and booted from a hard disk. The system hangs at:

error: no suitable video mode found.
Booting in blind mode
Linux version 5.2.32-yocto-standard (oe-user@oe-host) (gcc version 9.2.0 (GCC)) #1 SMP PREEMPT Wed Mar 18 19:45:31 UTC 2020
Command line: BOOT_IMAGE=/0/boot/vmlinuz rw rootwait ostree_boot=LABEL=otaboot 
ostree_root=LABEL=otaroot flux=fluxdata ostree=/boot/0/ostree console=ttyS0,115200 console=tty0
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Hygon HygonGenuine
  Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000005efff] usable
BIOS-e820: [mem 0x000000000005f000-0x000000000005ffff] reserved
BIOS-e820: [mem 0x0000000000060000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000079980fff] usable
BIOS-e820: [mem 0x0000000079981000-0x0000000079af2fff] reserved
BIOS-e820: [mem 0x0000000079af3000-0x0000000079eaffff] usable
BIOS-e820: [mem 0x0000000079eb0000-0x0000000079f6dfff] ACPI NVS
BIOS-e820: [mem 0x0000000079f6e000-0x000000007bd52fff] reserved
BIOS-e820: [mem 0x000000007bd53000-0x000000007bda7fff] type 20
BIOS-e820: [mem 0x000000007bda8000-0x000000007bda8fff] usable
BIOS-e820: [mem 0x000000007bda9000-0x000000007be2efff] reserved
BIOS-e820: [mem 0x000000007be2f000-0x000000007bffffff] usable
BIOS-e820: [mem 0x000000007c000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi:  ESRT=0x7bd50198  ACPI=0x79ef8000  ACPI 2.0=0x79ef8000  SMBIOS=0x7bc05000  SMBIOS 3.0=0x7bc04000 
SMBIOS 3.0.0 present.
DMI: Congatec AG conga-B7XD/conga-B7XD, BIOS TSDER115 09/21/2018
tsc: Fast TSC calibration using PIT
tsc: Detected 1496.608 MHz processor
last_pfn = 0x180000 max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
last_pfn = 0x7c000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x000000007bd50198 to 0x000000007bd501d0.
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
Secure boot could not be determined
RAMDISK: [mem 0x34a0f000-0x364fefff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000079EF8000 000024 (v02 ALASKA)
ACPI: XSDT 0x0000000079EF8098 0000B4 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x0000000079F15408 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x0000000079EF81E8 01D21B (v02 ALASKA A M I    01072009 INTL 20091013)
ACPI: FACS 0x0000000079F54F80 000040
ACPI: APIC 0x0000000079F15518 0000DC (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x0000000079F155F8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x0000000079F15640 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x0000000079F156E0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: UEFI 0x0000000079F15720 000042 (v01                 00000000      00000000)
ACPI: HPET 0x0000000079F15768 000038 (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: MSCT 0x0000000079F157A0 000090 (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: SLIT 0x0000000079F15830 00002D (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: SRAT 0x0000000079F15860 001158 (v03 ALASKA A M I    00000001 INTL 20091013)
ACPI: WDDT 0x0000000079F169B8 000040 (v01 ALASKA A M I    00000000 INTL 20091013)
ACPI: SSDT 0x0000000079F169F8 00EBA3 (v01 AMI    PmMgt    00000001 INTL 20120913)
ACPI: SPCR 0x0000000079F255A0 000050 (v02 A M I  APTIO V  01072009 AMI. 0005000B)
ACPI: TPM2 0x0000000079F255F0 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
ACPI: SSDT 0x0000000079F25628 0020CB (v02 ALASKA SpsNm    00000002 INTL 20120913)
ACPI: SSDT 0x0000000079F276F8 000064 (v02 ALASKA SpsNvs   00000002 INTL 20120913)
ACPI: PRAD 0x0000000079F27760 000102 (v02 ALASKA A M I    00000002 INTL 20120913)
ACPI: DMAR 0x0000000079F27868 0000C4 (v01 ALASKA A M I    00000001 INTL 20091013)
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x17fffffff]
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x17fffffff] -> [mem 0x00000000-0x17fffffff]
NODE_DATA(0) allocated [mem 0x17fff9000-0x17fffcfff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000017fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000005efff]
  node   0: [mem 0x0000000000060000-0x000000000009ffff]
  node   0: [mem 0x0000000000100000-0x0000000079980fff]
  node   0: [mem 0x0000000079af3000-0x0000000079eaffff]
  node   0: [mem 0x000000007bda8000-0x000000007bda8fff]
  node   0: [mem 0x000000007be2f000-0x000000007bffffff]
  node   0: [mem 0x0000000100000000-0x000000017fffffff]
Zeroed struct page in unavailable ranges: 24914 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
ACPI: PM-Timer IO Port: 0x408
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 3 global_irq 3 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 4 global_irq 4 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
ACPI: SPCR: console: uart,io,0x3f8,115200
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0005f000-0x0005ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x79981000-0x79af2fff]
PM: Registered nosave memory: [mem 0x79eb0000-0x79f6dfff]
PM: Registered nosave memory: [mem 0x79f6e000-0x7bd52fff]
PM: Registered nosave memory: [mem 0x7bd53000-0x7bda7fff]
PM: Registered nosave memory: [mem 0x7bda9000-0x7be2efff]
PM: Registered nosave memory: [mem 0x7c000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x90000000-0xfed1bfff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 51 pages/cpu s171160 r8192 d29544 u262144
Built 1 zonelists, mobility grouping on.  Total pages: 1007642
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/0/boot/vmlinuz rw rootwait ostree_boot=LABEL=otaboot ostree_root=LABEL=otaroot flux=fluxdata ostree=/boot/0/ostree console=ttyS0,115200 console=tty0
Memory: 3813488K/4094648K available (14340K kernel code, 1335K rwdata, 4088K rodata, 1628K init, 988K bss, 281160K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 43426 entries in 170 pages
rcu: Preemptible hierarchical RCU implementation.
rcu:    RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
        Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 16640, nr_irqs: 896, preallocated irqs: 16
random: get_random_bytes called from start_kernel+0x30d/0x4d9 with crng_init=0
Console: colour dummy device 80x25
printk: console [tty0] enabled
printk: console [ttyS0] enabled
ACPI: Core revision 20190509
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
DMAR: RMRR base: 0x0000007bc48000 end: 0x0000007bc57fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 8 under DRHD base  0xfbffc000 IOMMU 0
DMAR-IR: IOAPIC id 9 under DRHD base  0xfbffc000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x15929e5321f, max_idle_ns: 440795258645 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 2993.21 BogoMIPS (lpj=1496608)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
TAA: Vulnerable: Clear CPU buffers attempted, no microcode
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
Freeing SMP alternatives memory: 44K
smpboot: CPU0: Intel(R) Pentium(R) CPU D1519 @ 1.50GHz (family: 0x6, model: 0x56, stepping: 0x3)
Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
rcu: Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3 #4
MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details.
 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 8 processors activated (23945.72 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x79eb0000-0x79f6dfff] (778240 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
xor: automatically using best checksumming function   avx       
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
dca service started, version 1.12.1
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
cryptd: max_cpu_qlen set to 1000
raid6: avx2x4   gen() 14335 MB/s
raid6: avx2x4   xor()  9460 MB/s
raid6: avx2x2   gen() 12187 MB/s
raid6: avx2x2   xor()  7371 MB/s
raid6: avx2x1   gen() 10511 MB/s
raid6: avx2x1   xor()  6972 MB/s
raid6: sse2x4   gen()  7562 MB/s
raid6: sse2x4   xor()  4882 MB/s
raid6: sse2x2   gen()  6292 MB/s
raid6: sse2x2   xor()  4039 MB/s
raid6: sse2x1   gen()  5390 MB/s
raid6: sse2x1   xor()  3650 MB/s
raid6: using algorithm avx2x4 gen() 14335 MB/s
raid6: .... xor() 9460 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A03:03: _OSC: platform does not support [LTR]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100
pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000
pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfbf17000-0xfbf17fff]
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfbf00000-0xfbf0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbf16000-0xfbf1600f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xfbf15000-0xfbf1500f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbf13000-0xfbf133ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbf12000-0xfbf127ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbf11000-0xfbf110ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xfbf10000-0xfbf10fff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000
pci 0000:03:00.0: reg 0x10: [mem 0xfbe06000-0xfbe07fff 64bit]
pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000
pci 0000:03:00.1: reg 0x10: [mem 0xfbe04000-0xfbe05fff 64bit]
pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000
pci 0000:03:00.2: reg 0x10: [mem 0xfbe02000-0xfbe03fff 64bit]
pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000
pci 0000:03:00.3: reg 0x10: [mem 0xfbe00000-0xfbe01fff 64bit]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xfb400000-0xfb5fffff 64bit pref]
pci 0000:04:00.0: reg 0x20: [mem 0xfb604000-0xfb607fff 64bit pref]
pci 0000:04:00.0: reg 0x30: [mem 0xfb880000-0xfb8fffff pref]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: reg 0x184: [mem 0xfbc00000-0xfbc03fff 64bit]
pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfbc00000-0xfbcfffff 64bit] (contains BAR0 for 64 VFs)
pci 0000:04:00.0: reg 0x190: [mem 0xfbb00000-0xfbb03fff 64bit]
pci 0000:04:00.0: VF(n) BAR3 space: [mem 0xfbb00000-0xfbbfffff 64bit] (contains BAR3 for 64 VFs)
pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000
pci 0000:04:00.1: reg 0x10: [mem 0xfb200000-0xfb3fffff 64bit pref]
pci 0000:04:00.1: reg 0x20: [mem 0xfb600000-0xfb603fff 64bit pref]
pci 0000:04:00.1: reg 0x30: [mem 0xfb800000-0xfb87ffff pref]
pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
pci 0000:04:00.1: reg 0x184: [mem 0xfba00000-0xfba03fff 64bit]
pci 0000:04:00.1: VF(n) BAR0 space: [mem 0xfba00000-0xfbafffff 64bit] (contains BAR0 for 64 VFs)
pci 0000:04:00.1: reg 0x190: [mem 0xfb900000-0xfb903fff 64bit]
pci 0000:04:00.1: VF(n) BAR3 space: [mem 0xfb900000-0xfb9fffff 64bit] (contains BAR3 for 64 VFs)
pci 0000:00:02.2: PCI bridge to [bus 04-05]
pci 0000:00:02.2:   bridge window [mem 0xfb800000-0xfbcfffff]
pci 0000:00:02.2:   bridge window [mem 0xfb200000-0xfb6fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:08:00.0: [8086:1533] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [mem 0xfbd00000-0xfbd7ffff]
pci 0000:08:00.0: reg 0x18: [io  0xe000-0xe01f]
pci 0000:08:00.0: reg 0x1c: [mem 0xfbd80000-0xfbd83fff]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 08]
pci 0000:00:1c.7:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.7:   bridge window [mem 0xfbd00000-0xfbdfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
vgaarb: loaded
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
pnp: PnP ACPI init
system 00:01: [io  0x0500-0x057f] has been reserved
system 00:01: [io  0x0400-0x047f] has been reserved
system 00:01: [io  0x0580-0x059f] has been reserved
system 00:01: [io  0x0600-0x061f] has been reserved
system 00:01: [io  0x0880-0x0883] has been reserved
system 00:01: [io  0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:02: [io  0x0a00-0x0a0f] has been reserved
system 00:02: [io  0x0a10-0x0a1f] has been reserved
system 00:02: [io  0x0a20-0x0a2f] has been reserved
system 00:02: [io  0x0a30-0x0a3f] has been reserved
system 00:02: [io  0x0a40-0x0a4f] has been reserved
pnp: PnP ACPI: found 4 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 07] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000 add_align 100000
pci 0000:00:1c.0: BAR 14: assigned [mem 0x90000000-0x901fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x90200000-0x903fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:02.2: PCI bridge to [bus 04-05]
pci 0000:00:02.2:   bridge window [mem 0xfb800000-0xfbcfffff]
pci 0000:00:02.2:   bridge window [mem 0xfb200000-0xfb6fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x901fffff]
pci 0000:00:1c.0:   bridge window [mem 0x90200000-0x903fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 08]
pci 0000:00:1c.7:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.7:   bridge window [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x1000-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:04: resource 1 [mem 0xfb800000-0xfbcfffff]
pci_bus 0000:04: resource 2 [mem 0xfb200000-0xfb6fffff 64bit pref]
pci_bus 0000:07: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:07: resource 1 [mem 0x90000000-0x901fffff]
pci_bus 0000:07: resource 2 [mem 0x90200000-0x903fffff 64bit pref]
pci_bus 0000:08: resource 0 [io  0xe000-0xefff]
pci_bus 0000:08: resource 1 [mem 0xfbd00000-0xfbdfffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x641 took 16220 usecs
pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 27584K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x6fcc1000-0x73cc1000] (64MB)
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=20 bucket_order=0
async_tx: api initialized (async)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler mq-deadline registered
io scheduler kyber registered
pcieport 0000:00:01.0: PME: Signaling with IRQ 25
pcieport 0000:00:01.0: AER: enabled with IRQ 25
pcieport 0000:00:01.1: PME: Signaling with IRQ 26
pcieport 0000:00:01.1: AER: enabled with IRQ 26
pcieport 0000:00:02.0: PME: Signaling with IRQ 28
pcieport 0000:00:02.0: AER: enabled with IRQ 28
pcieport 0000:00:02.2: PME: Signaling with IRQ 29
pcieport 0000:00:02.2: AER: enabled with IRQ 29
pcieport 0000:00:03.0: PME: Signaling with IRQ 31
pcieport 0000:00:03.0: AER: enabled with IRQ 31
pcieport 0000:00:1c.0: PME: Signaling with IRQ 32
pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
pcieport 0000:00:1c.7: PME: Signaling with IRQ 33
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ioatdma: Intel(R) QuickData Technology Driver 5.00
ioatdma 0000:03:00.0: enabling device (0100 -> 0102)
ioatdma 0000:03:00.1: enabling device (0100 -> 0102)
ioatdma 0000:03:00.2: enabling device (0100 -> 0102)
ioatdma 0000:03:00.3: enabling device (0100 -> 0102)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
brd: module loaded
loop: module loaded
isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
mpt3sas version 28.100.00.00 loaded
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfbf12000 port 0xfbf12100 irq 41
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
pps pps0: new PPS source ptp0
igb 0000:08:00.0: added PHC on eth0
igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:08:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:13:95:35:0f:06
igb 0000:08:00.0: eth0: PBA No: 000300-000
igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
ixgbe: Copyright (c) 1999-2016 Intel Corporation.
pmd_set_huge: Cannot satisfy [mem 0xfb400000-0xfb600000] with a huge-page mapping due to MTRR override.
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: WDC WD5003AZEX-00K1GA0, 80.00A80, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD5003AZEX-0 0A80 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 sda5 sda6
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 1496.534 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x15925873df6, max_idle_ns: 440795253867 ns
clocksource: Switched to clocksource tsc
ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0
ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 000600-000
ixgbe 0000:04:00.0: 00:13:95:35:0f:05
ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection
libphy: ixgbe-mdio: probed
ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0
ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 000600-000
ixgbe 0000:04:00.1: 00:13:95:35:0f:04
ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection
libphy: ixgbe-mdio: probed
ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
ixgb: Copyright (c) 1999-2008 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfbf13000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
i8042: PNP: No PS/2 controller found.
input: PC Speaker as /devices/platform/pcspkr/input/input4
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: registered as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: [email protected]
intel_pstate: Intel P-state driver initializing
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
oprofile: using NMI interrupt.
u32 classifier
    Actions configured
NET: Registered protocol family 10
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
mce: Using 22 MCE banks
microcode: sig=0x50663, pf=0x10, revision=0x7000013
microcode: Microcode Update Driver: v2.2.
resctrl: L3 allocation detected
resctrl: L3DATA allocation detected
resctrl: L3CODE allocation detected
resctrl: L3 monitoring detected
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (6838801734, 947361610)->(8033881197, -247717853)
Loading compiled-in X.509 certificates
Btrfs loaded, crc32c=crc32c-generic
Key type encrypted registered
printk: console [netcon0] enabled
netconsole: network logging started
rtc_cmos 00:00: setting system clock to 2020-03-19T18:34:28 UTC (1584642868)
ALSA device list:
  No soundcards found.
Freeing unused kernel image memory: 1628K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 8K
Run /init as init process
usb 1-1: new high-speed USB device number 2 using ehci-pci
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
random: fast init done
random: mktemp: uninitialized urandom read (6 bytes read)
random: cryptsetup: uninitialized urandom read (2 bytes read)
random: crng init done
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 243+ running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to <conga-b7xd>.
systemd[1]: /usr/lib/systemd/system/gpsd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/gpsd.sock → /run/gpsd.sock; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock → /run/docker.sock; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/rpcbind.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/rpcbind.sock → /run/rpcbind.sock; please update the unit file accordingly.
systemd[1]: boot.mount: Unit is bound to inactive unit dev-sda2.device. Stopping, too.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-serial\x2dgetty.slice.
systemd[1]: Created slice User and Session Slice.
EXT4-fs (sda3): re-mounted. Opts: (null)
fuse: init (API version 7.31)
openvswitch: Open vSwitch switching datapath
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ADP1] (on-line)
i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000428-0x000000000000042F (\GPE0) (20190509/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x000000000000052C-0x000000000000052D (\GPIV) (20190509/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
EFI Variables Facility v0.08 2004-May-17
EDAC sbridge: CPU SrcID #0, Ha #0, Channel #1 has DIMMs, but ECC is disabled
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
pstore: Using crash dump compression: deflate
pstore: Registered efi as persistent store backend
gpio_ich gpio_ich.1.auto: GPIO from 436 to 511
EDAC sbridge: CPU SrcID #0, Ha #0, Channel #1 has DIMMs, but ECC is disabled
iTCO_vendor_support: vendor-support=0
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x0460)
intel_rapl: Found RAPL domain package
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
intel_rapl: Found RAPL domain dram
EDAC sbridge: CPU SrcID #0, Ha #0, Channel #1 has DIMMs, but ECC is disabled
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
EDAC sbridge: CPU SrcID #0, Ha #0, Channel #1 has DIMMs, but ECC is disabled
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
EDAC sbridge: CPU SrcID #0, Ha #0, Channel #1 has DIMMs, but ECC is disabled
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
EDAC sbridge: CPU SrcID #0, Ha #0, Channel #1 has DIMMs, but ECC is disabled
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
EDAC sbridge: CPU SrcID #0, Ha #0, Channel #1 has DIMMs, but ECC is disabled
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
EDAC sbridge: CPU SrcID #0, Ha #0, Channel #1 has DIMMs, but ECC is disabled
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
Press Enter for maintenance
(or press Control-D to continue):

Output of journalctl -p err from the rescue shell:

-- Logs begin at Thu 2020-03-19 18:34:32 UTC, end at Thu 2020-03-19 18:38:03 UTC. --
Mar 19 18:36:02 conga-b7xd systemd[1]: Timed out waiting for device /dev/disk/by-label/fluxdata.
Mar 19 18:38:03 conga-b7xd systemd-networkd-wait-online[465]: Event loop failed: Connection timed out
Mar 19 18:38:03 conga-b7xd systemd[1]: Failed to start Wait for Network to be Configured.

mount returns:

sh-5.0# mount
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
none on /dev type devtmpfs (rw,relatime,size=1954588k,nr_inodes=488647,mode=755)
/dev/sda3 on /sysroot type ext4 (rw,noatime)
/dev/sda2 on /sysroot/boot type ext4 (rw,relatime)
/dev/sda3 on / type ext4 (rw,noatime)
/dev/sda2 on /boot type ext4 (rw,relatime)
/dev/sda3 on /usr type ext4 (ro,noatime)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup2 on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
bpf on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,relatime,mode=700)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/debug type cgroup (rw,nosuid,nodev,noexec,relatime,debug)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
mqueue on /dev/mqueue type mqueue (rw,nosuid,nodev,noexec,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
fusectl on /sys/fs/fuse/connections type fusectl (rw,nosuid,nodev,noexec,relatime)
/dev/sda1 on /boot/efi type vfat (ro,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)

Commenting out the LABEL=fluxdata entry from /etc/fstab partly solves the issue, meaning I can at least get to a shell.

Any help appreciated!
@mferland mferland changed the title Booting an image with ostree and encrypted-storage does not work (19. Booting an image with ostree and encrypted-storage does not work Mar 19, 2020
@mferland
Copy link
Author

mferland commented Mar 19, 2020 •
edited
Loading

Forgot to mention, I am running Wind River Linux Base 19.45 Update 5 and used the wic image (and bmaptool) to flash the image to the disk.

Sign up for free to subscribe to this conversation on GitHub. Already have an account? Sign in.
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
1 participant
@mferland