csi-config-map-sample.yaml

---
# This is a sample configmap that helps define a Ceph cluster configuration
# as required by the CSI plugins.
apiVersion: v1
kind: ConfigMap
# Lets see the different configuration under config.json key.
# The <cluster-id> is used by the CSI plugin to uniquely identify and use a
# Ceph cluster, the value MUST match the value provided as `clusterID` in the
# StorageClass
# The <MONValue#> fields are the various monitor addresses for the Ceph cluster
# identified by the <cluster-id>
# If a CSI plugin is using more than one Ceph cluster, repeat the section for
# each such cluster in use.
# To add more clusters or edit MON addresses in an existing configmap, use
# the `kubectl replace` command.
# The "rbd.rados-namespace" is optional and represents a radosNamespace in the
# pool. If any given, all of the rbd images, snapshots, and other metadata will
# be stored within the radosNamespace.
# NOTE: The given radosNamespace must already exists in the pool.
# NOTE: Make sure you don't add radosNamespace option to a currently in use
# configuration as it will cause issues.
# The field "cephFS.subvolumeGroup" is optional and defaults to "csi".
# The "cephFS.netNamespaceFilePath" fields are the various network namespace
# path for the Ceph cluster identified by the <cluster-id>, This will be used
# by the CephFS CSI plugin to execute the mount -t in the
# network namespace specified by the "cephFS.netNamespaceFilePath".
# The "nfs.netNamespaceFilePath" fields are the various network namespace
# path for the Ceph cluster identified by the <cluster-id>, This will be used
# by the NFS CSI plugin to execute the mount -t in the
# network namespace specified by the "nfs.netNamespaceFilePath".
# The "rbd.netNamespaceFilePath" fields are the various network namespace
# path for the Ceph cluster identified by the <cluster-id>, This will be used
# by the RBD CSI plugin to execute the rbd map/unmap in the
# network namespace specified by the "rbd.netNamespaceFilePath".
# If a CSI plugin is using more than one Ceph cluster, repeat the section for
# each such cluster in use.
# NOTE: Changes to the configmap is automatically updated in the running pods,
# thus restarting existing pods using the configmap is NOT required on edits
# to the configmap.

# Lets see the different configuration under cluster-mapping.json key.
# This configuration is needed when volumes are mirrored using the Ceph-CSI.
# clusterIDMapping holds the mapping between two clusterId's of storage
# clusters.
# RBDPoolIDMapping holds the mapping between two poolId's of storage clusters.
# CephFSFscIDMapping holds the mapping between two FscId's of storage
# clusters.
data:
  config.json: |-
    [
      {
        "clusterID": "<cluster-id>",
        "rbd": {
           "netNamespaceFilePath": "<kubeletRootPath>/plugins/rbd.csi.ceph.com/net",
           "radosNamespace": "<rados-namespace>",
        },
        "monitors": [
          "<MONValue1>",
          "<MONValue2>",
          ...
          "<MONValueN>"
        ],
        "cephFS": {
          "subvolumeGroup": "<subvolumegroup for cephFS volumes>"
          "netNamespaceFilePath": "<kubeletRootPath>/plugins/cephfs.csi.ceph.com/net",
        }
        "nfs": {
          "netNamespaceFilePath": "<kubeletRootPath>/plugins/nfs.csi.ceph.com/net",
        }
      }
    ]
  cluster-mapping.json: |-
    [
      {
        "clusterIDMapping": {
          "clusterID on site1": "clusterID on site2"
        },
        "RBDPoolIDMapping": [{
          "poolID on site1": "poolID on site2"
          ...
        }],
        "CephFSFscIDMapping": [{
          "CephFS FscID on site1": "CephFS FscID on site2"
          ...
        }]
      }
    ]
metadata:
  name: ceph-csi-config