diff --git a/projects/ad4130_iio/README.rst b/projects/ad4130_iio/README.rst index d1ef2349f..7c3d514de 100644 --- a/projects/ad4130_iio/README.rst +++ b/projects/ad4130_iio/README.rst @@ -103,7 +103,7 @@ Software Downloads Below section provides an overview about the pre-requisites needed to build and run the project: * Source code is hosted on `precision-converters-firmware `_ repo -* `Build Guide for projects `_ +* `Build Guide for projects `_ * `Libiio: IIO Library `_ This library provides an abstracted interface to communicate with IIO device and IIO client application (IIO Oscilloscope) without worrying about the low diff --git a/projects/ad469x_iio/README.txt b/projects/ad469x_iio/README.txt index 9021d81bd..f0a723b11 100644 --- a/projects/ad469x_iio/README.txt +++ b/projects/ad469x_iio/README.txt @@ -14,8 +14,8 @@ The EVAL-AD4696FMCZ board is interfaced with SDP-K1 (or any Arduino compatible b Hardware Setup -------------- -Refer "Hardware Connections" section from below wiki page link: -https://wiki.analog.com/resources/tools-software/product-support-software/ad4696_mbed_iio_application +Refer "Hardware Connections" section from below page: +https://analogdevicesinc.github.io/precision-converters-firmware/source/projects/ad4696_iio/ad4696_iio.html How to Get Started @@ -23,7 +23,7 @@ How to Get Started Mbed web/online compiler: https://studio.keil.arm.com/auth/login/ Import code into compiler and compile it to generate executable binary file. Drag and drop binary file into USB drive hosted by SDP-K1 controller board. -Find detailed instructions here: https://wiki.analog.com/resources/tools-software/product-support-software/pcg-fw-mbed-build-guide +Find detailed instructions here: https://analogdevicesinc.github.io/precision-converters-firmware/source/build/project_build.html Notes diff --git a/projects/ad559xr_console/README.txt b/projects/ad559xr_console/README.txt index 4b6aa5300..a058d8933 100644 --- a/projects/ad559xr_console/README.txt +++ b/projects/ad559xr_console/README.txt @@ -12,7 +12,7 @@ Use of Mbed platform allows code to port on other Mbed supported target boards w Product details: https://www.analog.com/en/products/ad5592r.html Product Evaluation board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-ADA4250.html -User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/ad5592r_mbed_example +User Guide for this code: https://analogdevicesinc.github.io/precision-converters-firmware/source/projects/ad559xr_console/ad559xr_console.html Communication Protocol: SPI/I2C @@ -20,7 +20,7 @@ Hardware Setup -------------- Required: SDP-K1 (or alternative Mbed enabled controller board), EVAL-ADA4250-ARDZ board and USB cable. Plug in the EVAL-AD5592R board on SDP-K1 board (or any other Mbed enabled controller board) -using the SDP-120 (refer software wiki page to identify suitable interface). +using the SDP-120 (refer software documentation page to identify suitable interface). Connect SDP-K1 board to the PC using the USB cable. @@ -29,7 +29,7 @@ How to Get Started Mbed web/online compiler: https://studio.keil.arm.com/auth/login/ Import code into compiler and compile it to generate executable binary file. Drag and drop binary file into USB drive hosted by SDP-K1 controller board. -Find detailed instructions here: https://wiki.analog.com/resources/tools-software/product-support-software/pcg-fw-mbed-build-guide +Find detailed instructions here: https://analogdevicesinc.github.io/precision-converters-firmware/source/build/project_build.html Notes diff --git a/projects/ad559xr_console/tests/readme.txt b/projects/ad559xr_console/tests/readme.txt index d620ef1b1..f8f4dec7d 100644 --- a/projects/ad559xr_console/tests/readme.txt +++ b/projects/ad559xr_console/tests/readme.txt @@ -23,8 +23,8 @@ Links: LK11: C/B LK1: B -For more details and photos for connecting power on the AD5592R/93R the wiki page: -https://wiki.analog.com/resources/tools-software/product-support-software/ad5592r_mbed_example +For more details and photos for connecting power on the AD5592R/93R: +https://analogdevicesinc.github.io/precision-converters-firmware/source/projects/ad559xr_console/ad559xr_console.html diff --git a/projects/ad5770r_console/README.txt b/projects/ad5770r_console/README.txt index 695de1e7d..15d2b679f 100644 --- a/projects/ad5770r_console/README.txt +++ b/projects/ad5770r_console/README.txt @@ -28,7 +28,7 @@ How to Get Started Mbed web/online compiler: https://studio.keil.arm.com/auth/login/ Import code into compiler and compile it to generate executable binary file. Drag and drop binary file into USB drive hosted by SDP-K1 controller board. -Find detailed instructions here: https://wiki.analog.com/resources/tools-software/product-support-software/pcg-fw-mbed-build-guide +Find detailed instructions here: https://analogdevicesinc.github.io/precision-converters-firmware/source/build/project_build.html Notes diff --git a/projects/ad590_console/README.txt b/projects/ad590_console/README.txt index 3d02fbc68..e92720c80 100644 --- a/projects/ad590_console/README.txt +++ b/projects/ad590_console/README.txt @@ -10,7 +10,7 @@ Use of Mbed platform allows code to port on other Mbed supported target boards w Product details: https://www.analog.com/en/products/ad590.html Product Evaluation board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD590.html -User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/eval-ad590ardz +User Guide for this code: https://analogdevicesinc.github.io/precision-converters-firmware/source/projects/ad590_console/ad590_console.html Communication Protocol: SPI @@ -18,7 +18,7 @@ Hardware Setup -------------- Required: SDP-K1 (or alternative Mbed enabled controller board), EVAL-AD590-ARDZ board and USB cable. Plug in the EVAL-AD590-ARDZ board on SDP-K1 board (or any other Mbed enabled controller board) -using the Arduino connector (refer software wiki page to identify suitable interface). +using the Arduino connector (refer software documentation page to identify suitable interface). Connect SDP-K1 board to the PC using the USB cable. @@ -27,7 +27,7 @@ How to Get Started Mbed web/online compiler: https://studio.keil.arm.com/auth/login/ Import code into compiler and compile it to generate executable binary file. Drag and drop binary file into USB drive hosted by SDP-K1 controller board. -Find detailed instructions here: https://wiki.analog.com/resources/tools-software/product-support-software/pcg-fw-mbed-build-guide +Find detailed instructions here: https://analogdevicesinc.github.io/precision-converters-firmware/source/build/project_build.html Notes diff --git a/projects/ad5933_console/README.txt b/projects/ad5933_console/README.txt index 02b2d863d..94ce19e2e 100644 --- a/projects/ad5933_console/README.txt +++ b/projects/ad5933_console/README.txt @@ -14,7 +14,7 @@ Use of Mbed platform allows code to port on other Mbed supported target boards w Product details: https://www.analog.com/en/products/ad5933.html Eval board details: https://digilent.com/reference/pmod/pmodia/start -User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/ad5933-mbed +User Guide for this code: https://analogdevicesinc.github.io/precision-converters-firmware/source/projects/ad5933_console/ad5933_console.html Communication Protocol: I2C @@ -22,7 +22,7 @@ Hardware Setup -------------- Required: SDP-K1 (or alternative MBED enabled controller board), recommend Digilent PMOD IA, USB cable. Connect the DIGILENT PMOD IA board to SDP-K1 board (or any other Mbed enabled controller board) -using the SDP-120 or Arduino on-board connector (refer software wiki page to identify suitable interface) and short jumper-wires. +using the SDP-120 or Arduino on-board connector (refer software documentation page to identify suitable interface) and short jumper-wires. Connect SDP-K1 board to the PC using the USB cable. @@ -31,7 +31,7 @@ How to Get Started Mbed web/online compiler: https://studio.keil.arm.com/auth/login/ Import code into compiler and compile it to generate executable binary file. Drag and drop binary file into USB drive hosted by SDP-K1 controller board. -Find detailed instructions here: https://wiki.analog.com/resources/tools-software/product-support-software/pcg-fw-mbed-build-guide +Find detailed instructions here: https://analogdevicesinc.github.io/precision-converters-firmware/source/build/project_build.html Notes diff --git a/projects/ad7124_console/README.txt b/projects/ad7124_console/README.txt index de0dd060a..c5e1cb5d6 100644 --- a/projects/ad7124_console/README.txt +++ b/projects/ad7124_console/README.txt @@ -12,7 +12,7 @@ controller board: https://os.mbed.com/platforms/SDP_K1/ Product details: https://www.analog.com/en/products/ad7124-8.html Eval board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD7124-8.html -User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/ad7124_mbed_support +User Guide for this code: https://analogdevicesinc.github.io/precision-converters-firmware/source/projects/ad7124_console/ad7124_console.html Communication Protocol: SPI @@ -29,7 +29,7 @@ How to Get Started Mbed web/online compiler: https://studio.keil.arm.com/auth/login/ Import code into compiler and compile it to generate executable binary file. Drag and drop binary file into USB drive hosted by SDP-K1 controller board. -Find detailed instructions here: https://wiki.analog.com/resources/tools-software/product-support-software/pcg-fw-mbed-build-guide +Find detailed instructions here: https://analogdevicesinc.github.io/precision-converters-firmware/source/build/project_build.html Notes diff --git a/projects/ad7124_temperature-measure/README.txt b/projects/ad7124_temperature-measure/README.txt index 176d94179..e284cbb30 100644 --- a/projects/ad7124_temperature-measure/README.txt +++ b/projects/ad7124_temperature-measure/README.txt @@ -12,7 +12,7 @@ controller board: https://os.mbed.com/platforms/SDP_K1/ Product details: https://www.analog.com/en/products/ad7124-8.html, https://www.analog.com/en/products/ad7124-4.html Product Evaluation board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD7124-8.html https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD7124-4.html -User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/ad7124_temperature_measurement_demo +User Guide for this code: https://analogdevicesinc.github.io/precision-converters-firmware/source/projects/ad7124_temperature-measure/ad7124_temperature-measure.html Communication Protocol: SPI @@ -29,7 +29,7 @@ How to Get Started Mbed web/online compiler: https://studio.keil.arm.com/auth/login/ Import code into compiler and compile it to generate executable binary file. Drag and drop binary file into USB drive hosted by SDP-K1 controller board. -Find detailed instructions here: https://wiki.analog.com/resources/tools-software/product-support-software/pcg-fw-mbed-build-guide +Find detailed instructions here: https://analogdevicesinc.github.io/precision-converters-firmware/source/build/project_build.html Notes diff --git a/projects/ad7134_iio/README.txt b/projects/ad7134_iio/README.txt index b1ee79ea5..b8f16b3d0 100644 --- a/projects/ad7134_iio/README.txt +++ b/projects/ad7134_iio/README.txt @@ -18,18 +18,15 @@ Hardware Setup -------------- Required: SDP-K1 (or alternative Mbed/STM32 enabled controller board), EVAL-AD7134 board and USB cable. Find further instructions on the hardware connections here: -https://wiki.analog.com/resources/tools-software/product-support-software/ad7134_iio_support#hardware_connections +https://analogdevicesinc.github.io/precision-converters-firmware/source/projects/ad7134_iio/ad7134_iio.html How to Get Started ------------------ The Firmware supports MBED and STM32 platforms. Import code into the respective platform and compile it to generate the executable binary. -Find detailed instructions for MBED platform here: -https://wiki.analog.com/resources/tools-software/product-support-software/pcg-fw-mbed-build-guide - -Find detailed instructions for STM32 platform here: -https://wiki.analog.com/resources/tools-software/product-support-software/pcg-fw-stm32-build-guide +Find detailed instructions here: +https://analogdevicesinc.github.io/precision-converters-firmware/source/build/project_build.html Notes diff --git a/projects/ad7134_iio/app/app_config.h b/projects/ad7134_iio/app/app_config.h index 01e432256..8ad723f83 100644 --- a/projects/ad7134_iio/app/app_config.h +++ b/projects/ad7134_iio/app/app_config.h @@ -182,7 +182,7 @@ * and not in case of SAI-TDM method. For TDM, AD7134 can operate only as * a controller) * Note: The mode configuration must be modified in the hardware to match the one set - * in software. Refer project wiki document for required h/w changes */ + * in software. Refer project documentation for required h/w changes */ #define AD7134_ASRC_MODE CONTROLLER_MODE /* Enable/Disable the use of SDRAM for ADC data capture buffer */ diff --git a/projects/ad717x_console/README.txt b/projects/ad717x_console/README.txt index 8e9d6697b..e44202772 100644 --- a/projects/ad717x_console/README.txt +++ b/projects/ad717x_console/README.txt @@ -26,7 +26,7 @@ Product details: https://www.analog.com/en/products/ad4111.html https://www.analog.com/en/products/landing-pages/001/ad717x-family.html Eval board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD4111.html (*Refer device datasheet page for the respective EVAL boards manual) -User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/ad717x_ad411x_mbed_example +User Guide for this code: https://analogdevicesinc.github.io/precision-converters-firmware/source/projects/ad717x_console/ad717x_console.html Communication Protocol: SPI @@ -44,7 +44,7 @@ How to Get Started Mbed web/online compiler: https://studio.keil.arm.com/auth/login/ Import code into compiler and compile it to generate executable binary file. Drag and drop binary file into USB drive hosted by SDP-K1 controller board. -Find detailed instructions here: https://wiki.analog.com/resources/tools-software/product-support-software/pcg-fw-mbed-build-guide +Find detailed instructions here: https://analogdevicesinc.github.io/precision-converters-firmware/source/build/project_build.html Notes diff --git a/projects/ad717x_iio/README.txt b/projects/ad717x_iio/README.txt index 0296aca93..d18eda38b 100644 --- a/projects/ad717x_iio/README.txt +++ b/projects/ad717x_iio/README.txt @@ -26,7 +26,7 @@ Product details: https://www.analog.com/en/products/ad4111.html https://www.analog.com/en/products/landing-pages/001/ad717x-family.html Eval board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD4111.html (*Refer device datasheet page for the respective EVAL boards manual) -User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/ad717x_mbed_iio_support +User Guide for this code: https://analogdevicesinc.github.io/precision-converters-firmware/source/projects/ad717x_iio/ad717x_iio.html Communication Protocol: SPI @@ -44,7 +44,7 @@ How to Get Started Mbed web/online compiler: https://studio.keil.arm.com/auth/login/ Import code into compiler and compile it to generate executable binary file. Drag and drop binary file into USB drive hosted by SDP-K1 controller board. -Find detailed instructions here: https://wiki.analog.com/resources/tools-software/product-support-software/pcg-fw-mbed-build-guide +Find detailed instructions here: https://analogdevicesinc.github.io/precision-converters-firmware/source/build/project_build.html Notes diff --git a/projects/ad738x_iio/README.txt b/projects/ad738x_iio/README.txt index 4e8339d53..10cc30ac8 100644 --- a/projects/ad738x_iio/README.txt +++ b/projects/ad738x_iio/README.txt @@ -19,7 +19,7 @@ Hardware Setup -------------- Required: SDP-K1 (or alternative Mbed enabled controller board), EVAL-AD7380 board, 9V adapter and USB cable. Connect the EVAL-AD7380 board to SDP-K1 board (or any other Mbed enabled controller board) using jumper wires -(refer software wiki page for connection setup). +(refer software documentation page for connection setup). Connect SDP-K1 board to the PC using the USB cable. AD7380 EVB is powered through external 9-12V DC adapter. @@ -28,7 +28,7 @@ How to Get Started Mbed web/online compiler: https://studio.keil.arm.com/auth/login/ Import code into compiler and compile it to generate executable binary file. Drag and drop binary file into USB drive hosted by SDP-K1 controller board. -Find detailed instructions here: https://wiki.analog.com/resources/tools-software/product-support-software/pcg-fw-mbed-build-guide +Find detailed instructions here: https://analogdevicesinc.github.io/precision-converters-firmware/source/build/project_build.html Notes diff --git a/projects/ad7606_iio/README.txt b/projects/ad7606_iio/README.txt index aa482bfe5..f49b21faa 100644 --- a/projects/ad7606_iio/README.txt +++ b/projects/ad7606_iio/README.txt @@ -14,8 +14,8 @@ The AD7606-Eval board is interfaced with SDP-K1 (or any Arduino compatible board Hardware Setup -------------- -Refer "Hardware Connections" section from below wiki page link: -https://wiki.analog.com/resources/tools-software/product-support-software/ad7606_mbed_iio_application +Refer "Hardware Connections" section from below page link: +https://analogdevicesinc.github.io/precision-converters-firmware/source/projects/ad7606_iio/ad7606_iio.html How to Get Started @@ -23,7 +23,7 @@ How to Get Started Mbed web/online compiler: https://studio.keil.arm.com/auth/login/ Import code into compiler and compile it to generate executable binary file. Drag and drop binary file into USB drive hosted by SDP-K1 controller board. -Find detailed instructions here: https://wiki.analog.com/resources/tools-software/product-support-software/pcg-fw-mbed-build-guide +Find detailed instructions here: https://analogdevicesinc.github.io/precision-converters-firmware/source/build/project_build.html Notes diff --git a/projects/ad7689_iio/README.txt b/projects/ad7689_iio/README.txt index caddea92b..27bd9d4f8 100644 --- a/projects/ad7689_iio/README.txt +++ b/projects/ad7689_iio/README.txt @@ -11,7 +11,7 @@ Use of Mbed platform allows code to port on other Mbed supported target boards w Product details: AD7689, AD7682, AD7949, AD7699 Product Evaluation board details: EVAL-AD7689-ARDZ -User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/ad7689_mbed_iio_support +User Guide for this code: https://analogdevicesinc.github.io/precision-converters-firmware/source/projects/ad7606_iio/ad7606_iio.html Communication Protocol: SPI @@ -19,7 +19,7 @@ Hardware Setup -------------- Required: SDP-K1 (or alternative Mbed enabled controller board), EVAL-AD7689 board and USB cable. Plug in the EVAL-AD7689 board on SDP-K1 board (or any other Mbed enabled controller board) using the Arduino connector -(refer software wiki page for connection setup). +(refer software documentation page for connection setup). Connect SDP-K1 board to the PC using the USB cable. AD7689 EVB is powered through USB supply coming from SDP-K1. @@ -28,7 +28,7 @@ How to Get Started Mbed web/online compiler: https://studio.keil.arm.com/auth/login/ Import code into compiler and compile it to generate executable binary file. Drag and drop binary file into USB drive hosted by SDP-K1 controller board. -Find detailed instructions here: https://wiki.analog.com/resources/tools-software/product-support-software/pcg-fw-mbed-build-guide +Find detailed instructions here: https://analogdevicesinc.github.io/precision-converters-firmware/source/build/project_build.html Notes diff --git a/projects/ad77681_iio/README.txt b/projects/ad77681_iio/README.txt index 63d87df17..d9cacf329 100644 --- a/projects/ad77681_iio/README.txt +++ b/projects/ad77681_iio/README.txt @@ -11,7 +11,7 @@ Use of Mbed platform allows code to port on other Mbed supported target boards w Product details: https://www.analog.com/en/products/ad7768-1.html Product Evaluation board details: https://www.analog.com/en/design-center/reference-designs/circuits-from-the-lab/cn0540.html -User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/ad77681_mbed_iio_application +User Guide for this code: https://analogdevicesinc.github.io/precision-converters-firmware/source/projects/ad77681_iio/ad77681_iio.html Communication Protocol: SPI @@ -27,7 +27,7 @@ How to Get Started Mbed web/online compiler: https://studio.keil.arm.com/auth/login/ Import code into compiler and compile it to generate executable binary file. Drag and drop binary file into USB drive hosted by SDP-K1 controller board. -Find detailed instructions here: https://wiki.analog.com/resources/tools-software/product-support-software/pcg-fw-mbed-build-guide +Find detailed instructions here: https://analogdevicesinc.github.io/precision-converters-firmware/source/build/project_build.html Notes diff --git a/projects/ad777x_iio/README.txt b/projects/ad777x_iio/README.txt index 1b97a01b1..110586220 100644 --- a/projects/ad777x_iio/README.txt +++ b/projects/ad777x_iio/README.txt @@ -20,18 +20,15 @@ Hardware Setup Required: SDP-K1 (or alternative Mbed/STM32 enabled controller board), EVAL-AD777x board and USB cable. Find further instructions on the hardware connections here: -https://wiki.analog.com/resources/tools-software/product-support-software/ad777x_iio_support#hardware_connections +https://analogdevicesinc.github.io/precision-converters-firmware/source/projects/ad777x_iio/ad777x_iio.html How to Get Started ------------------ The Firmware supports MBED and STM32 platforms. Import code into the respective platform and compile it to generate the executable binary. -Find detailed instructions for MBED platform here: -https://wiki.analog.com/resources/tools-software/product-support-software/pcg-fw-mbed-build-guide - -Find detailed instructions for STM32 platform here: -https://wiki.analog.com/resources/tools-software/product-support-software/pcg-fw-stm32-build-guide +Find detailed instructions here: +https://analogdevicesinc.github.io/precision-converters-firmware/source/build/project_build.html Notes diff --git a/projects/adt7420_console/README.txt b/projects/adt7420_console/README.txt index 09456577c..d6175ba42 100644 --- a/projects/adt7420_console/README.txt +++ b/projects/adt7420_console/README.txt @@ -10,7 +10,7 @@ controller board: https://os.mbed.com/platforms/SDP_K1/ Product details: https://www.analog.com/en/products/adt7420.html, https://www.analog.com/en/products/adt7320.html Product Evaluation board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EV-TempSense-ARDZ.html -User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/tempsense-mbed +User Guide for this code: https://analogdevicesinc.github.io/precision-converters-firmware/source/projects/adt7420_console/adt7420_console.html Communication Protocol: SPI/I2C @@ -28,7 +28,7 @@ How to Get Started Mbed web/online compiler: https://studio.keil.arm.com/auth/login/ Import code into compiler and compile it to generate executable binary file. Drag and drop binary file into USB drive hosted by SDP-K1 controller board. -Find detailed instructions here: https://wiki.analog.com/resources/tools-software/product-support-software/pcg-fw-mbed-build-guide +Find detailed instructions here: https://analogdevicesinc.github.io/precision-converters-firmware/source/build/project_build.html Notes diff --git a/projects/ltc268x_console/README.txt b/projects/ltc268x_console/README.txt index aec443e08..b6ffd4c51 100644 --- a/projects/ltc268x_console/README.txt +++ b/projects/ltc268x_console/README.txt @@ -14,7 +14,7 @@ Product details: https://www.analog.com/en/products/LTC2688.html Product Evaluation board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/DC2873A.html https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/DC2904A.html -User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/ltc268x +User Guide for this code: https://analogdevicesinc.github.io/precision-converters-firmware/source/projects/ltc268x_console/ltc268x_console.html Communication Protocol: SPI @@ -22,7 +22,7 @@ Hardware Setup -------------- Required: SDP-K1 (or alternative Mbed enabled controller board), DC2873A-B board and USB cable. Connect the DC2873A-B or DC2904A-B board to the SDP-K1 board (or any other Mbed enabled controller board) -using the Arduino connector and jumper wires (refer software wiki page to identify suitable interface). +using the Arduino connector and jumper wires (refer software documentation page to identify suitable interface). Connect SDP-K1 board to the PC using the USB cable. @@ -31,7 +31,7 @@ How to Get Started Mbed web/online compiler: https://studio.keil.arm.com/auth/login/ Import code into compiler and compile it to generate executable binary file. Drag and drop binary file into USB drive hosted by SDP-K1 controller board. -Find detailed instructions here: https://wiki.analog.com/resources/tools-software/product-support-software/pcg-fw-mbed-build-guide +Find detailed instructions here: https://analogdevicesinc.github.io/precision-converters-firmware/source/build/project_build.html Notes diff --git a/projects/nanodac_console/README.txt b/projects/nanodac_console/README.txt index 980e90ec4..a31ab341a 100644 --- a/projects/nanodac_console/README.txt +++ b/projects/nanodac_console/README.txt @@ -38,7 +38,7 @@ These code files provide drivers to interface with nanoDAC+ family of devices li Product details: https://www.analog.com/en/products/ad5686.html Eval board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD5686R.html -User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/nanodac-mbed +User Guide for this code: https://analogdevicesinc.github.io/precision-converters-firmware/source/projects/nanodac_console/nanodac_console.html Communication Protocol: SPI/I2C @@ -54,7 +54,7 @@ How to Get Started Mbed web/online compiler: https://studio.keil.arm.com/auth/login/ Import code into compiler and compile it to generate executable binary file. Drag and drop binary file into USB drive hosted by SDP-K1 controller board. -Find detailed instructions here: https://wiki.analog.com/resources/tools-software/product-support-software/pcg-fw-mbed-build-guide +Find detailed instructions here: https://analogdevicesinc.github.io/precision-converters-firmware/source/build/project_build.html Notes