Port of https://github.com/thokis/SimpleDFPlayerMini-for-MicroPython for Raspberry Pi.
This module enables Python-based projects to use the DFPlayer Mini via simple function calls.
It only supports SD-Card playback and operates in tranmit only mode.
The DFPlayer generally doesn't bring much benefit on a device like the Raspberry Pi. There are enough other possibilities to play audio. However, I had the case that I already used an I2S sound card for other things (telephony/baresip) and also wanted to play music without having to pay attention to how the volume is set (doorbell). In my opinion, DFPlayer is the easiest and best way to play the ringtone.
First import the SimpleDFPlayerMini module from dfplayer.py
from dfplayer import SimpleDFPlayerMini
Then create an instance of SimpleDFPlayerMini
player = SimpleDFPlayerMini(5)
Arguments for the constructor consist of the following parameters:
- GPIO pin used for TX (pigpio GPIO number, e.g. 5 for GPIO5)
The above constructor initializes a SimpleDFPlayerMini object on GPIO pin 5.
You also need to install pigpio:
sudo apt install pigpio
The function calls are self-explanatory for the most cases. If not take a look at the wiki.
Basically you only have to connect the RX of the DFPlayerMini to the specific TX port of your board. Continuing our example from before RX from the DFPlayerMini goes to GPIO5 on the Raspberry Pi.
Also solder a 1k resistor inbetween the connection or professionally speaking in serial.
|----DFPLAYER-MINI----|
PI 3.3v ----|VCC--------------BUSY|
PI GPIO5 ---|RX---------------USB-|
|TX---------------USB+|
|DAC_R---------ADKEY_2|
|DAC_I---------ADKEY_1|
|-----|SPK_1------------IO_2|
Speaker |GND---------------GND|--- PI GND
|-----|SPK_2------------IO_1|
|--------|_SD_|-------|
No other Pins (except VCC and GND) should be used.