Automatiko Approval Tasks is an implementation for Tekton that allows to pause the execution of the pipeline run and wait for approval by human actors. It is an implementation based on custom tasks of Tekton that is currently in v1beta1 stage which is considered not stable.
Automatiko Approval Tasks has two versions
v1alpha1that is up to0.5.0release and supports tekton custom tasks inv1alpha1.Runversionv1beta1that is from0.6.0release and supports tekton custom tasks inv1beta1.CustomRunversion
It is recommended to use v1beta1.CustomRun and 0.6.0 (or newer) release whenever possible. All below documentation references v1beta1 version. To see readme for v1alpha1 go here
See Roadmap for already defined features to be added. Feel free to ask for additional ones either by creating an issue or adding to the roadmap.
Approval Task allows to use approvals as part of you pipeline definition. Let's look quickly at very simple example pipeline
apiVersion: tekton.dev/v1beta1
kind: Pipeline
metadata:
name: testpipeline
spec:
tasks:
- name: approval
taskRef:
apiVersion: tekton.automatiko.io/v1beta1
kind: ApprovalTask
name: approvaltask
params:
- name: pipeline
value: "$(context.pipelineRun.name)"
- name: description
value: "Sample approval from pipeline $(context.pipeline.name)"
- name: approvers
value:
- "john"
- name: approved
when:
- input: $(tasks.approval.results.decision)
operator: in
values: [ "true" ]
taskRef:
name: print-decision
runAfter:
- approval
params:
- name: decision
value: "APPROVED"
- name: comment
value: $(tasks.approval.results.comment)
- name: rejected
when:
- input: $(tasks.approval.results.decision)
operator: in
values: [ "false" ]
taskRef:
name: print-decision
runAfter:
- approval
params:
- name: decision
value: "REJECTED"
- name: comment
value: $(tasks.approval.results.comment)
where the first task of the pipeline is to wait for approval from a single approver - john and then switch either to go to approved or rejected task that simply prints out the decision and comment.
Approval task is identified with following
- apiVersion: tekton.automatiko.io/v1beta1
- kind: ApprovalTask
- name: approvaltask
It accepts several parameters
- pipeline - name of the pipeline this approval is associated with
- description - human focused description of the operation to be done
- approvers - list of approvers (usernames or email addresses) that task should be assigned to
- groups - list of groups of approvers that task should be assigned to
- strategy - strategy of the approval task - currently supported SINGLE, MULTI and FOUR_EYES - if not set defaults to SINGLE
Note that approvers and groups are mutually exclusive meaning only one of them will be used. If groups are set they will take precedence and approvals will be based on group assignment.
Single strategy means that there will be just one task created, regardless how many approvers/groups where set. Each approver/group is equally eligible to approve or reject the task ad once one of them decides the pipeline will continue.
Multi strategy means that for every approver/group there will be dedicated task assigned and each and every one of them must make the decision to continue pipeline run. Since the multi strategy assumes that decision must be unanimous the decision is considered rejected as soon as one approver/group marks it as rejected.
Four eyes strategy is based on four eyes principle when it comes to approvals. It means that the approval is a two step process. Both steps are assigned to the same group but the second task cannot be completed by the user who completed the first one. For the approval to be considered approved both steps must be approved. In case first step is rejected, the approval task is rejected as well and by that second step is not initiated.
Upon completion, approval task will set following results that can be used by further tasks of the pipeline
- decision either
trueorfalsethat corresponds to approved and rejected - comment optional comment given by approvers, in case of multi strategy used, each comment will be separated by
|symbol - approvedBy user who approved the task, in case of multi strategy used, each user will be separated by
|symbol - rejectedBy user who rejected the task, in case of multi strategy used, each user will be separated by
|symbol
An example how to use it can be as follows
- name: approved
when:
- input: $(tasks.approval.results.decision)
operator: in
values: [ "true" ]
taskRef:
name: print-decision
runAfter:
- approval
params:
- name: decision
value: "APPROVED"
- name: comment
value: $(tasks.approval.results.comment)
Notifications can be sent via multiple channels
- Slack
- Microsoft Teams
Approval tasks can be configured with email notification support that will send emails to approvers upon task creation. To make use of it, email server must be configured as part of the deployment and approvers must be given as email addresses.
tasks:
- name: approval
taskRef:
apiVersion: tekton.automatiko.io/v1beta1
kind: ApprovalTask
name: approvaltask
params:
- name: pipeline
value: "$(context.pipelineRun.name)"
- name: description
value: "Sample approval from pipeline $(context.pipeline.name)"
- name: approvers
value:
- "[email protected]"
- "[email protected]"
Notifications can also be sent to Slack channel. Slack channel is set as parameter as presented below.
- parameter name: *notifyOnSlack`
- parameter value: the channel name to be used
NOTE: channel name here is not the actual Slack channel name but a reference to what it is configured to via environment variable.
tasks:
- name: approval
taskRef:
apiVersion: tekton.automatiko.io/v1beta1
kind: ApprovalTask
name: approvaltask
params:
- name: pipeline
value: "$(context.pipelineRun.name)"
- name: description
value: "Sample approval from pipeline $(context.pipeline.name)"
- name: approvers
value:
- "[email protected]"
- "[email protected]"
- name: notifyOnSlack
value: "mychannel"
This is based on Slack Incoming webhooks and as such needs to be enabled for given channel. There will be dedicated webhook link that should be configured on the deployment of the approval tasks
- name: QUARKUS_AUTOMATIKO_NOTIFICATIONS_SLACK_MYCHANNEL
value: "https://hooks.slack.com/s......"
TIP: There can be multiple channels defined, any channel defined in the pipeline must have a configuration. It is recommended to put these values in a secret since the webhook URLs contain secret information.
Notifications can also be sent to Teams channel. Teams channel is set as parameter as presented below.
- parameter name: *notifyOnTeams`
- parameter value: the channel name to be used
NOTE: channel name here is not the actual Teams channel name but a reference to what it is configured to via environment variable.
tasks:
- name: approval
taskRef:
apiVersion: tekton.automatiko.io/v1beta1
kind: ApprovalTask
name: approvaltask
params:
- name: pipeline
value: "$(context.pipelineRun.name)"
- name: description
value: "Sample approval from pipeline $(context.pipeline.name)"
- name: approvers
value:
- "[email protected]"
- "[email protected]"
- name: notifyOnTeams
value: "mychannel"
This is based on Teams Incoming webhooks and as such needs to be enabled for given channel. There will be dedicated webhook link that should be configured on the deployment of the approval tasks
- name: QUARKUS_AUTOMATIKO_NOTIFICATIONS_TEAMS_MYCHANNEL
value: "https://trisotech.webhook.office.com/webhookb2......"
TIP: There can be multiple channels defined, any channel defined in the pipeline must have a configuration. It is recommended to put these values in a secret since the webhook URLs contain secret information.
Approval tasks come with integration with Tekton Dashboard. It shows up in the Extensions sections and allow to view approval tasks as long as their pipeline run exists within the cluster.
As part of the detail view of the approval task you can see directly information about decision on given task and how many approvers have already made decisions.
Approval tasks come with basic UI capabilities to help approvers provide their decision (approve or reject). When email notifications are used, then each approver will get an email with dedicated link to the form.
On the form there is option to add optional comment that will be then available in the further tasks of the pipeline as part of the decision results.
Approval tasks can also be found via direct access form that can be found on the root URL of the service deployed as part of this project.
In the form you need to provide
- pipeline run name - name of the pipeline run you want to find tasks for
- approver - approver (user name or email or whatever else was used in pipeline definition) that tasks should be found for
This will provide a list of tasks available with links to the form to provide decision.
Version 0.3.0 introduced a dashboard like endpoint that allows users to receive real time updates on their approval tasks. A sample page that allows to specify user and group can be found at /tasks.html path of your approval
task site. Once user connects to the approval tasks the tasks will automatically show up on the board.
In addition, tasks that were completed automatically disappear from the board as well.
Since version 0.3.0
My approval tasks page allows to find tasks for logged in user. It gives similar feature as Approval dashboard but it is not real time (requires to refresh the page to load latest tasks) and allows to get tasks that are already taken care of.
That in turn allows to find what was the status of a given task and what was the approval decision.
On tasks that are already completed, tooltip is included on the row, so moving mouse over it will show the comment from the approver.
NOTE: This page still uses user and groups to find eligible tasks. In case no authentication is configured user and groups can be provided via url query parameters e.g. [email protected]&group=admin&group=developers
When installing version that has My approval tasks feature, the page will always come back empty. This is due tot he fact that approval tasks where created before the feature existed. To bring tasks on the page, execute reindex command with following curl command
curl -X POST http://host:port/management/index/tasks
replace host and port with proper values for your environment. Successful execution of the command should return status similar to following:
{"single":2,"fourEyes":0,"approvals":2,"message":"User tasks reindexed","runs":0,"multiGroup":0,"multi":0}
Since version 0.10.0
Approval tasks comes with management view that is giving an internal insight into what is behind the tasks. It is process management view as approval tasks are based on workflows (built with Automatiko project). You can see there details on each workflow instance that is used behind the scenes to provide this feature to tekton pipelines.
This section will guide you through all the steps to make approval tasks run in tekton.
Following command will install Tekton and Tekton Dashboard into your Kubernetes cluster
kubectl apply --filename https://storage.googleapis.com/tekton-releases/pipeline/latest/release.yaml
kubectl apply --filename https://storage.googleapis.com/tekton-releases/dashboard/latest/release.yaml
To be able to use Tekton with Approval Tasks you need to enable use of custom tasks.
kubectl edit cm feature-flags -n tekton-pipelines
In there find the line for custom-task-version and check its value to v1beta1
Depending on the version of tekton you use this flag might already be set to v1beta1, for details see
custom tasks migration docs
NOTE: All scripts for Approval Tasks can be found in k8s directory of this repository
First step is to create CRD of Approval Tasks
kubectl apply -f k8s/v1beta1/approvaltasks.tekton.automatiko.io-v1.yml
To be able to see Approval Tasks in Tekton Dashbord there is a need to create extension and cluster role and cluster role binding for it to allow Tekton Dashboard read and watch approval tasks objects.
kubectl apply -f k8s/v1beta1/approvaltasks-dashboard-ext.yaml
kubectl apply -f k8s/v1beta1/approvaltask-dashboard-cr.yaml
kubectl apply -f k8s/v1beta1/approvaltasks-dashboard-crb.yaml
Lastly, install the approval tasks into your cluster
NOTE: It comes with default values for service URL and namespaces to watch. Please look into them before deployment, there are represented as environment variables of the deployment and have following values
- name: QUARKUS_OPERATOR_SDK_NAMESPACES
value: default
- name: QUARKUS_AUTOMATIKO_SERVICE_URL
value: http://localhost:9000
Change them accordingly to your environment needs.
kubectl apply -f k8s/v1beta1/kubernetes-basic.yml
If you want to use approval tasks with email notifications configure email server and use
kubectl apply -f k8s/v1beta1/kubernetes-email.yml
To enable email notification, approval tasks deployment must be equipped with additional environment variables. A template for it can be found in k8s directory.
- name: QUARKUS_MAILER_FROM
value: [email protected]
- name: QUARKUS_MAILER_HOST
value: smtp.gmail.com
- name: QUARKUS_MAILER_PORT
value: "587"
- name: QUARKUS_MAILER_USERNAME
value: [email protected]
- name: QUARKUS_MAILER_PASSWORD
value: password
- name: QUARKUS_PROFILE
value: withemail
Above properties must be set based on your email server before deployment.
In case the mail server does not support TLS, the add following environment variable
- name: QUARKUS_MAILER_START_TLS
value: DISABLED
In some situations users would like to customize email that is being sent out to the approvers. It is possible to be done by providing a templates of the emails via volumes mount.
- Create your customized email template as an html file named
approval-email.html - Create config map with the html file from point 1
kubectl create configmap approval-task-templates --from-file=/path/to/templates/folder/
-
Add volume and volume mount to the deployment manifest
... volumeMounts: - name: templates-volume mountPath: /templates ... volumes: - name: templates-volume configMap: name: approval-task-templates -
Set the path to the templates folder via environment variables in the deployment manifest
- name: QUARKUS_AUTOMATIKO_TEMPLATES_FOLDER value: "/templates"
Deploy it and from now on it will use the customized email template.
Since version 0.4.0
By default Approval Tasks container runs with file system based persistence. It can actually be used like that as it can easily recover all running instances of pipeline runs that require approvals but it can lead to duplicated email notification being sent.
To avoid that and preserve running instances across restarts of the container behind approval tasks you can easily use persistent volumes to be mounted to the container.
IMPORTANT: Persistent volume used for storage for approval tasks data should use file system that have support for extended attributes. Using such file system will significantly improve performance in case there are many active instances of approval tasks.
To configure persistent volume for approval tasks, first create persistent volume claim
apiVersion: v1
kind: PersistentVolumeClaim
metadata:
name: approvaltasks-pv-claim
spec:
accessModes:
- ReadWriteOnce
resources:
requests:
storage: 1Gi
Next, modify deployment of approval task to use the persistent volume claim
spec:
volumes:
- name: approvaltasks-pv-storage
persistentVolumeClaim:
claimName: approvaltasks-pv-claim
containers:
mount the volume to a path
volumeMounts:
- mountPath: "/data"
name: task-pv-storage
and set additional environment variables to instruct it where data should be stored
- name: QUARKUS_AUTOMATIKO_PERSISTENCE_FILESYSTEM_PATH
value: /data/processes
- name: QUARKUS_AUTOMATIKO_JOBS_FILESYSTEM_PATH
value: /data/jobs
- name: QUARKUS_AUTOMATIKO_INDEX_USERTASKS_FS_PATH
value: /data/usertasks
This will configure all the persistent data to be stored in external storage.
A complete example can be found in k8s/v1beta1/kubernetes-basic-pv.yml
Default deployment scripts create on service but not ingress as it really depends on your target kubernetes cluser. So this needs to be configured separately and the URL used on the ingress must be used for QUARKUS_AUTOMATIKO_SERVICE_URL in deployment.
for minikube you can use port forward for both Tekton Dashboard and Approval Tasks
kubectl --namespace tekton-pipelines port-forward svc/tekton-dashboard 9097:9097
kubectl port-forward svc/automatiko-approval-task 9000:80
By default Approval tasks are configured to be open, meaning do not require authentication to access approval task but even without authentication users must know both pipeline run name and the user id (or email) that the task is assigned to.
In many situations, authentication is required and to comply with this requirements Approval Task takes advantage of OAuth proxy that allows to configure it with various identity providers such as
- Azure
- GitHub
- and others
Security is built based on side car that runs the OAuth proxy and only that container is exposed via service and then ingress.
Here are the relevant parts of the deployment manifest that configures it
First is the deployment to define the second container with OAuth
containers:
- env:
- name: KUBERNETES_NAMESPACE
valueFrom:
fieldRef:
fieldPath: metadata.namespace
- name: QUARKUS_OPERATOR_SDK_NAMESPACES
value: default
- name: QUARKUS_AUTOMATIKO_SERVICE_URL
value: https://my-public-known-host.com
- name: QUARKUS_PROFILE
value: secured
image: automatiko/automatiko-approval-task
imagePullPolicy: IfNotPresent
name: automatiko-approval-task
ports:
- containerPort: 8080
name: http
protocol: TCP
- name: oauth-proxy
args:
- --provider=github
- --https-address=
- --http-address=:8888
- --email-domain=*
- --prefer-email-to-user=true
- --upstream=http://localhost:8080
- --client-id=GITHUB_CLIENT_ID
- --client-secret=GITHUB_CLIENT_SECRET
- --cookie-secret=0rM16Iv8aSvlOZYXuabusXO98_y6Yf7QYjcIhXk67Dw=
- --pass-access-token=true
image: quay.io/oauth2-proxy/oauth2-proxy
imagePullPolicy: IfNotPresent
ports:
- name: oauth-proxy
containerPort: 8888
protocol: TCP
Important parts to note
QUARKUS_PROFILEis set tosecuredwhich configures the service to require authentication, it can also be set tosecuredwithemailif both security and email notifications are desired- a new container
oauth-proxyis added with configured GitHub provider, see all configuration options here - approval task is (as usual) exposed via 8080 port
- oauth proxy is exposed via 8888 port
Next is to configure the service to go via oauth proxy instead of approval task
apiVersion: v1
kind: Service
metadata:
labels:
app.kubernetes.io/name: automatiko-approval-task
app.kubernetes.io/version: 0.0.1
name: automatiko-approval-task
spec:
ports:
- name: http
port: 80
targetPort: 8888
selector:
app.kubernetes.io/name: automatiko-approval-task
app.kubernetes.io/version: 0.0.1
type: ClusterIP
This will then go via oauth proxy container before the approval task is accessed ensuring that all traffic to the application is secured.
A complete example can be found in k8s/v1beta1/kubernetes-oauth.yml
Once a instance is complete you can deploy the task and pipeline to get the first approval task from Tekton pipeline.
kubectl apply -f k8s/v1beta1/test/print.yaml
kubectl apply -f k8s/v1beta1/test/pipeline-single.yaml
Then head to Tekton Dashboard where you should see something like this
and just run an instance of the pipeline. Next you can go to Approval Tasks in the Extensions and should see one instance there too. If you to into details you will see labels that indicate the state of it
and when going to YAML view you will see an approvalUrl in the status section. Copy that url and open in new window, it will take you to either search for (when using MULTI strategy) or directly to the form (when using single strategy).
If you use single strategy and assigned approvers to it, you might need to append ?user=YOUR_USER_NAME or ?group=YOUR_GROUP to the url. Groups can be given multiple times.
Once you made decision (approve or reject) the pipeline run will complete.
and the approval task instance will also be updated (look at labels)
If you want o clean it up, just delete pipeline run and all other resources will be automatically cleaned. This is actually a good practice to have some sort of cleanup of complete pipeline runs to ensure the best performance.