Passing results from Agirs to IrpTransmogrifier

[zpuskaric]

Hi,

IrScrutinizer did not work for me directly (it could not read data from Arduino Nano with Agirs), but what works is using Arduino serial console to scan code, pasting that to IrScrutinizer and than saving the result as girr file.
The procedure is a bit cumbersome and therefore I would like to write a program which will automate the procedure. The problem I am having is passing data to IRpTransmogrifier in order to be analyzed.
How should I pass data from Agirs to IRpTransmogrifier in order to get .girr putput?

[bengtmartensson]

If you collect your capture data in a text file, like, say captures.txt:

+2388 -622 +1187 -622 +588 -622 +1187 -622 +588 -622 +1187 -622 +1187 -622 +1187 -622 +1187 -622 +588 -622 +587 -622 +587 -622 +588 -24502 +2386 -624 +1187 -622 +588 -622 +1187 -622 +588 -622 +1187 -622 +1187 -622 +1187 -622 +1187 -622 +588 -622 +588 -622 +588 -622 +588 -24502 +2386 -622 +1189 -622 +588 -622 +1187 -622 +587 -622 +1187 -622 +1187 -622 +1187 -622 +1187 -622 +588 -622 +588 -622 +588 -622 +586 -65535
+2388 -622 +1189 -622 +1187 -622 +587 -622 +588 -622 +587 -622 +1187 -622 +1187 -622 +1187 -622 +587 -622 +588 -622 +587 -622 +588 -25094 +2388 -624 +1187 -621 +1187 -622 +588 -621 +588 -622 +587 -622 +1187 -622 +1187 -622 +1187 -622 +588 -622 +588 -622 +588 -622 +588 -25094 +2389 -622 +1188 -622 +1187 -622 +587 -622 +585 -624 +585 -622 +1187 -622 +1187 -624 +1187 -622 +586 -622 +588 -622 +588 -622 +588 -25110 +2388 -622 +1187 -622 +1187 -622 +588 -622 +586 -624 +586 -624 +1187 -622 +1187 -622 +1187 -622 +587 -622 +585 -624 +586 -622 +588 -25094 +2388 -622 +1187 -622 +1189 -622 +588 -622 +587 -622 +588 -622 +1187 -622 +1187 -622 +1187 -622 +587 -622 +588 -622 +588 -622 +588 -65535
+2387 -626 +1184 -624 +1184 -624 +585 -624 +585 -624 +1187 -624 +585 -624 +585 -624 +1185 -624 +585 -624 +585 -624 +585 -624 +585 -25686 +2390 -624 +1185 -624 +1187 -623 +585 -624 +585 -624 +1184 -626 +585 -624 +585 -624 +1185 -624 +586 -624 +585 -624 +585 -624 +585 -25702 +2390 -624 +1185 -624 +1185 -626 +585 -624 +585 -624 +1185 -624 +585 -624 +586 -624 +1185 -624 +586 -624 +585 -624 +585 -624 +585 -25702 +2388 -624 +1187 -624 +1185 -624 +585 -624 +585 -624 +1185 -624 +585 -624 +585 -624 +1187 -624 +585 -624 +585 -624 +585 -624 +586 -25702 +2388 -626 +1185 -624 +1185 -624 +585 -624 +585 -624 +1185 -626 +583 -626 +583 -624 +1187 -624 +585 -624 +585 -624 +585 -624 +585 -25702 +2388 -624 +1187 -624 +1185 -624 +585 -624 +585 -624 +1185 -624 +585 -624 +585 -624 +1185 -624 +585 -624 +585 -624 +585 -624 +585 -25702 +2388 -624 +1186 -624 +1185 -626 +583 -626 +585 -624 +1185 -624 +585 -624 +585 -624 +1185 -624 +585 -624 +585 -624 +585 -624 +586 -65535

you can feed that file into itptransmogrifier using the --input parameter, and (optionally) using the --girr parameter:

$ irptransmogrifier decode --input captures.txt --girr
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!--This file is in the Girr (General IR Remote) format, see http://www.harctoolbox.org/Girr.html--><remotes xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" girrVersion="1.1" title="Generated by IrpTransmogrifier version 1.2.8" xsi:schemaLocation="http://www.harctoolbox.org/Girr http://www.harctoolbox.org/schemas/girr_ns-1.1.xsd http://www.harctoolbox.org/irp-protocols http://www.harctoolbox.org/schemas/irp-protocols.xsd" xmlns="http://www.harctoolbox.org/Girr">
    <remote name="remote">
        <commandSet name="commandSet">
            <command master="parameters" name="unnamed_0">
                <parameters protocol="Sony12">
                    <parameter name="D" value="1"/>
                    <parameter name="F" value="117"/>
                </parameters>
            </command>
            <command master="parameters" name="unnamed_1">
                <parameters protocol="Sony12">
                    <parameter name="D" value="1"/>
                    <parameter name="F" value="99"/>
                </parameters>
            </command>
            <command master="parameters" name="unnamed_2">
                <parameters protocol="Sony12">
                    <parameter name="D" value="1"/>
                    <parameter name="F" value="19"/>
                </parameters>
            </command>
        </commandSet>
    </remote>
</remotes>

[zpuskaric]

Thank a lot, is it possible for irptransmogrifier to decode input from stdin?

[bengtmartensson]

sure, just use - (hyphen) as argument to the --input option.

$ irptransmogrifier decode --input - --girr < captures.txt

[zpuskaric]

Perfect, thanks a lot.