From db34032752cb3191eefe6a78f631eb814e216f6d Mon Sep 17 00:00:00 2001 From: Aris Date: Wed, 22 Jan 2025 15:28:48 +0100 Subject: [PATCH] Added how to remove guards/legs --- .../tutorials/getting-started-with-crazyflie-brushless.md | 3 +++ 1 file changed, 3 insertions(+) diff --git a/src/documentation/tutorials/getting-started-with-crazyflie-brushless.md b/src/documentation/tutorials/getting-started-with-crazyflie-brushless.md index a17b4b4e..1fcc37db 100644 --- a/src/documentation/tutorials/getting-started-with-crazyflie-brushless.md +++ b/src/documentation/tutorials/getting-started-with-crazyflie-brushless.md @@ -92,6 +92,9 @@ Slide the legs/guards on from below hooking the little plastic part on the circu While not recommended, you can fasten your legs/guards on the PCB using the long (silver) screws. This will prevent the legs/guards from detaching during a crush, which could potentially damage the Crazyflie. +Here is a quick guide on how to detach the legs/guards. +Turn the Crazyflie upside down. Place your thumbs on the cf arm, one on each side of the pin above the ABC sign. With your index nails try to spread the leg's/guard's clips while simultaneously pushing with your thumbs. + {% endsi_step %} {% si_step attach the rubber pad %}