Table of Contents:
- Ansible Role: eos_cli_config_gen
- Overview
- Role Inputs and Outputs
- Requirements
- Input Variables
- ACLs
- Aliases
- Authentication
- Banners
- Router BFD
- Custom Templates
- DHCP Relay
- EOS CLI
- Errdisable
- Filters
- Generate Device Documentation
- Generate Default Config
- Hardware
- Interfaces
- Internal VLAN Order
- IP DHCP Relay
- IP ICMP Redirect
- LACP
- Link Tracking Groups
- LLDP
- MACsec
- Maintenance Mode
- Management
- MPLS
- Multi-Chassis LAG - MLAG
- Multicast
- Monitoring
- System Control-Plane
- Patch Panel
- PTP
- Prompt
- Quality of Services
- Routing
- ARP
- MAC Address-table
- Router Virtual MAC Address
- IP Routing
- IPv6 Routing
- Router General configuration
- Router BGP Configuration
- Router IGMP Configuration
- Router OSPF Configuration
- Router ISIS Configuration
- Service Routing Configuration BGP
- Service Routing Protocols Model
- Static Routes
- IPv6 Static Routes
- VRF Instances
- Router L2 VPN
- Spanning Tree
- Terminal Settings
- Traffic Policies
- Virtual Source NAT
- VLANs
- Upgrade of eos_cli_config_gen data model
- License
eos_cli_config_gen, is a role that generates eos cli syntax and device documentation.
The eos_cli_config_gen role:
- Designed to generate the intended configuration offline, without relying on switch current state information.
- Facilitates the evaluation of the configuration prior to deployment with tools like Batfish
- Facilitates the evaluation of the configuration post deployment with eos_validate_state role.
Figure 1 below provides a visualization of the roles inputs, and outputs and tasks in order executed by the role.
Inputs:
- Structured EOS configuration file in yaml format.
Outputs:
- EOS configuration in CLI format.
- Device Documentation in Markdown format.
Tasks:
- Include device structured configuration that was previously generated.
- Generate EOS configuration in CLI format.
- Generate Device Documentation in Markdown format.
Requirements are located here: avd-requirements
- The input variables are documented inline within yaml formatted output with: "< >"
- Variables are organized in order of how they appear in the CLI syntax.
- Available features and variables may vary by platforms, refer to documentation on arista.com for specifics.
- All values are optional.
AVD currently supports 2 different data models for extended ACLs:
- The legacy
access_listsdata model, for compatibility with existing deployments - The improved
ip_access_listsdata model, for access to more EOS features
Both data models can coexists without conflicts, as different keys are used: access_lists vs ip_access_lists.
Access list names must be unique.
The legacy data model supports simplified ACL definition with sequence_number to action_string mapping:
access_lists:
< access_list_name_1 >:
counters_per_entry: < true | false >
sequence_numbers:
< sequence_id_1 >:
action: "< action as string >"
< sequence_id_2 >:
action: "< action as string >"
< access_list_name_2 >:
counters_per_entry: < true | false >
sequence_numbers:
< sequence_id_1 >:
action: "< action as string >"The improved data model has a more sophisticated design documented below:
ip_access_lists:
- name: "< access list name as string >"
counters_per_entry: < true | false >
entries:
# remark entry
- sequence: < acl entry sequence number > # optional
# NOTE: if remark is defined, other keys in acl entry will be ignored
remark: "< Comment, up to 100 characters >"
# normal entry
- sequence: < acl entry sequence number > # optional
action: "< permit | deny >" # required
protocol: "< ip | tcp | udp | icmp | other protocol name or number >" # required
# NOTE: A.B.C.D without a mask means host
source: "< any | A.B.C.D/E | A.B.C.D >" # required
source_ports_match: "< eq | gt | lt | neq | range | default -> eq >"
source_ports: ["< tcp/udp port name or number >",] # optional
# NOTE: A.B.C.D without a mask means host
destination: "< any | A.B.C.D/E | A.B.C.D >" # required
destination_ports_match: "< eq | gt | lt | neq | range| default -> eq >"
destination_ports: ["< tcp/udp port name or number >",] # optional
tcp_flags: ["< tcp flag name >",] # optional
fragments: < true | false > # optional, match non-head fragment packets
log: < true | false > # optional, log matches against this rule
ttl: < <0-254> TTL value > # optional
ttl_match: "< eq | gt | lt | neq| default -> eq >" # optional
icmp_type: "< Message type name/number for ICMP packets >" # optional
icmp_code: "< Message code for ICMP packets >" # optional
nexthop_group: "< nexthop-group name >" # optional
tracked: < true | false > # optional, match packets in existing ICMP/UDP/TCP connections
dscp: "< DSCP value or name >" # optional
vlan_number: < vlan number > # optional
vlan_inner: < true | false| default -> false > # optional
vlan_mask: "< 0x000-0xFFF Vlan mask >" # optionalThe improved data model allows to limit the number of ACL entries that AVD is allowed to generate by defining ip_access_lists_max_entries.
Only normal entries under ip_access_lists will be counted, remarks will be ignored.
If the number is above the limit, the playbook will fail. This provides a simplified control over hardware utilization.
The numbers must be based on the hardware tests and AVD does not provide any guidance. Note that other EOS features may use the same hardware resources and affect the supported scale.
ip_access_lists_max_entries: <maximum number of ACL entries allowed per switch> # optionalipv6_standard_access_lists:
< ipv6_access_list_name_1 >:
counters_per_entry: < true | false >
sequence_numbers:
< sequence_id_1 >:
action: "< action as string >"
< sequence_id_2 >:
action: "< action as string >"
< ipv6_access_list_name_2 >:
sequence_numbers:
< sequence_id_1 >:
action: "< action as string >"standard_access_lists:
< access_list_name_1 >:
counters_per_entry: < true | false >
sequence_numbers:
< sequence_id_1 >:
action: "< action as string >"
< sequence_id_2 >:
action: "< action as string >"
< access_list_name_2 >:
sequence_numbers:
< sequence_id_1 >:
action: "< action as string >"ipv6_access_lists:
< ipv6_access_list_name_1 >:
counters_per_entry: < true | false >
sequence_numbers:
< sequence_id_1 >:
action: "< action as string >"
< sequence_id_2 >:
action: "< action as string >"
< ipv6_access_list_name_2 >:
sequence_numbers:
< sequence_id_1 >:
action: "< action as string >"mac_access_lists:
- name: < mac_access_list_name_1 >
counters_per_entry: < true | false >
entries:
- sequence: < sequence_id_1 >
action: "< action as string >"
- sequence: < sequence_id_2 >
action: "< action as string >"
- name: < mac_access_list_name_2 >
entries:
- sequence: < sequence_id_1 >
action: "< action as string >"aliases: |
< list of alias commands in EOS CLI syntax >aaa_authentication:
login:
default: < group group_name | local | none > < group group_name | local | none >
console: < group group_name | local | none > < group group_name | local | none >
enable:
default: < group group_name | local | none > < group group_name | local | none >
dot1x:
default: < group group_name >
policies:
on_failure_log: < true | false >
on_success_log: < true | false >
local:
allow_nopassword: < false | true >
lockout:
failure: < 1-255 >
duration: < 1-4294967295 >
window: < 1-4294967295 >aaa_authorization:
exec:
default: < group group_name | local | none > < group group_name | local | none >
config_commands: < true | false >
serial_console: < true | false >
commands:
all_default: < group group_name | local | none > < group group_name | local | none >
privilege:
- level: < privilege level(s) 0-15 >
default: < group group_name | local | none > < group group_name | local | none >aaa_accounting:
exec:
console:
type: < none | start-stop | stop-only >
group: < group_name >
default:
type: < none | start-stop | stop-only >
group: < group_name >
system:
default:
type: < none | start-stop | stop-only >
group: < group_name >
commands:
console:
- commands: < all | 0-15 >
type: < none | start-stop | stop-only >
group: < group_name >
logging: < true | false >
- commands: < all | 0-15 >
type: < none | start-stop | stop-only >
group: < group_name >
logging: < true | false >
default:
- commands: < all | 0-15 >
type: < none | start-stop | stop-only >
group: < group_name >
logging: < true | false >
- commands: < all | 0-15 >
type: < none | start-stop | stop-only >
group: < group_name >
logging: < true | false >aaa_root:
secret:
sha512_password: "< sha_512_password >"aaa_server_groups:
- name: < server_group_name >
type: < tacacs+ | radius | ldap >
servers:
- server: < server1_ip_address >
vrf: < vrf_name >
- server: < server1_ip_address >
vrf: < vrf_name >
- name: < server_group_name >
type: < tacacs+ | radius | ladp >
servers:
- server: < host1_ip_address >enable_password:
hash_algorithm: < md5 | sha512 >
key: "< hashed_password >"ip_radius_source_interfaces:
- name: < interface_name_1 >
vrf: < vrf_name_1 >
- name: < interface_name_2 >
vrf: < vrf_name_2 >ip_tacacs_source_interfaces:
- name: <interface_name_1 >
vrf: < vrf_name_1 >
- name: <interface_name_2 >local_users:
< user_1 >:
privilege: < 1-15 >
role: < role >
sha512_password: "< sha_512_password >"
no_password: < true | do not configure a password for given username. sha512_password MUST not be defined for this user. >
ssh_key: "< ssh_key_string >"
< user_2 >:
privilege: < 1-15 >
role: < role >
sha512_password: "< sha_512_password >"
no_password: < true | do not configure a password for given username. sha512_password MUST not be defined for this user. >
ssh_key: "< ssh_key_string >"roles:
- name: < role_name >
sequence_numbers:
- sequence: < sequence_number_1 >
action: < permit | deny >
mode: < "config" | "config-all" | "exec" | "<mode>" >
command: < command as string >
- sequence: < sequence_number_2 >
action: < permit | deny >
mode: < "config" | "config-all" | "exec" | "<mode>" >
command: < command as string >radius_servers:
- host: < host IP address or name >
vrf: < vrf_name >
key: < encrypted_key >tacacs_servers:
hosts:
- host: < host1_ip_address >
vrf: < vrf_name >
key: < encrypted_key >
single_connection: < true | false >
- host: < host2_ip_address >
key: < encrypted_key >
timeout: < timeout in seconds >
policy_unknown_mandatory_attribute_ignore: < true | false >banners:
login: |
< text ending with EOF >
motd: |
< text ending with EOF >router_bfd:
interval: < rate in milliseconds >
min_rx: < rate in milliseconds >
multiplier: < 3-50 >
multihop:
interval: < rate in milliseconds >
min_rx: < rate in milliseconds >
multiplier: < 3-50 >custom_templates:
- < template 1 relative path below playbook directory >
- < template 2 relative path below playbook directory >dhcp_relay:
servers:
- < server_ip_or_hostname >
tunnel_requests_disabled: < true | false ># EOS CLI rendered directly on the root level of the final EOS configuration
eos_cli: |
< multiline eos cli >errdisable:
detect:
causes:
- acl
- arp-inspection
- dot1x
- link-change
- tapagg
- xcvr-misconfigured
- xcvr-overheat
- xcvr-power-unsupported
- xcvr-unsupported
recovery:
causes:
- arp-inspection
- bpduguard
- dot1x
- hitless-reload-down
- lacp-rate-limit
- link-flap
- no-internal-vlan
- portchannelguard
- portsec
- speed-misconfigured
- tapagg
- uplink-failure-detection
- xcvr-misconfigured
- xcvr-overheat
- xcvr-power-unsupported
- xcvr-unsupported
interval: < seconds | default = 300 >prefix_lists:
< prefix_list_name_1 >:
sequence_numbers:
< sequence_id_1 >:
action: "< action as string >"
< sequence_id_2 >:
action: "< action as string >"
< prefix_list_name_2 >:
sequence_numbers:
< sequence_id_1 >:
action: "< action as string >"ipv6_prefix_lists:
< ipv6_prefix_list_name_1 >:
sequence_numbers:
< sequence_id_1 >:
action: "< action as string >"
< sequence_id_2 >:
action: "< action as string >"
< ipv6_prefix_list_name_2 >:
sequence_numbers:
< sequence_id_1 >:
action: "< action as string >"community_lists:
< community_list_name_1 >:
action: "< action as string >"
< community_list_name_2 >:
action: "< action as string >"ip_extcommunity_lists:
< community_list_name_1 >:
- type: < permit | deny >
extcommunities: "< communities as string >"
< community_list_name_2 >:
- type: < permit | deny >
extcommunities: "< communities as string >"ip_extcommunity_lists_regexp:
< community_list_name >:
- type: < permit | deny >
regexp: "< string >"peer_filters:
< peer_filter_name_1:
sequence_numbers:
< sequence_id_1 >:
match: "< match as string >"
< sequence_id_2 >:
match: "< match as string >"
< peer_filter_name_2:
sequence_numbers:
< sequence_id_1 >:
match: "< match as string >"route_maps:
< route_map_name_1 >:
sequence_numbers:
< sequence_id_1 >:
type: < permit | deny >
description: < description >
match:
- "< match rule 1 as string >"
- "< match rule 2 as string >"
set:
- "< set as string >"
< sequence_id_2 >:
type: < permit | deny >
match:
- "< match as string >"
< route_map_name_2 >:
sequence_numbers:
< sequence_id_1 >:
type: < permit | deny >
description: < description >
set:
- "< set rule 1 as string >"
- "< set rule 2 as string >"match_list_input:
string:
< match_list_1 >:
sequence_numbers:
< sequence_id 1 >:
match_regex: < match string >as_path:
regex_mode: < asn | string >
access_lists:
- name: < access_list_name_1 >
entries:
- type: < permit | deny >
match: "< regex to match >"
origin: < "any" | "egp" | "igp" | "incomplete" | default -> "any" >generate_device_documentation: < true | false | default -> true >The generate_default_config knob allows to omit default EOS configuration.
This can be useful when leveraging eos_cli_config_gen to generate configlets with CloudVision.
The following commands will be omitted when generate_default_config is set to false:
- RANCID Content Type
- Hostname
- Default configuration for
aaa - Default configuration for
enable password - Transceiver qsfp default mode
- End of configuration delimiter
generate_default_config: < true | false | default -> true >hardware_counters:
features:
- <feature_1>: < direction | in | out >
- <feature_1>: < direction | in | out >tcam_profile:
system: < tcam profile name to activate >
profiles:
< tcam_profile 01 >: "{{ lookup('file', '< path to TCAM profile using EOS syntax >') }}"platform:
trident:
forwarding_table_partition: < partition >
sand:
lag:
hardware_only: < true | false >
mode: < mode | default -> 1024x16 >
forwarding_mode: < petraA | arad >
multicast_replication:
default: ingressredundancy:
protocol: < redundancy_protocol >hardware:
speed_groups:
1:
serdes: < 10g | 25g >
2:
serdes: < 10g | 25g >
...# Routed Interfaces
ethernet_interfaces:
<Ethernet_interface_1 >:
description: < description >
shutdown: < true | false >
speed: < interface_speed | forced interface_speed | auto interface_speed >
mtu: < mtu >
# l3dot1q and l2dot1q are used for sub-interfaces.
# The parent interface should be defined as routed.
type: < routed | switched | l3dot1q | l2dot1q >
vrf: < vrf_name >
error_correction_encoding:
enabled: < true | false | default -> true >
fire_code: < true | false >
reed_solomon: < true | false >
link_tracking_groups:
- name: < group_name >
direction: < upstream | downstream >
encapsulation_dot1q_vlan: < vlan tag to configure on sub-interface >
encapsulation_vlan:
client:
dot1q:
vlan: < Client VLAN ID >
outer: < Client Outer VLAN ID >
inner: < Client Inner VLAN ID >
unmatched: < true | false >
# network encapsulation is all optional, and skipped if using client unmatched.
network:
dot1q:
vlan: < Network VLAN ID >
outer: < Network Outer VLAN ID >
inner: < Network Inner VLAN ID >
client: < true | false >
vlan_id: < 1-4094 >
ip_address: < IPv4_address/Mask >
ip_address_secondaries:
- < IPv4_address/Mask >
- < IPv4_address/Mask >
ipv6_enable: < true | false >
ipv6_address: < IPv6_address/Mask >
ipv6_address_link_local: < link_local_IPv6_address/Mask >
ipv6_nd_ra_disabled: < true | false >
ipv6_nd_managed_config_flag: < true | false >
ipv6_nd_prefixes:
< IPv6_address_1/Mask >:
valid_lifetime: < infinite or lifetime in seconds >
preferred_lifetime: < infinite or lifetime in seconds >
no_autoconfig_flag: < true | false >
< IPv6_address_2/Mask >:
access_group_in: < access_list_name >
access_group_out: < access_list_name >
ipv6_access_group_in: < ipv6_access_list_name >
ipv6_access_group_out: < ipv6_access_list_name >
mac_access_group_in: < mac_access_list_name >
mac_access_group_out: < mac_access_list_name >
ospf_network_point_to_point: < true | false >
ospf_area: < ospf_area >
ospf_cost: < ospf_cost >
ospf_authentication: < none | simple | message-digest >
ospf_authentication_key: "< encrypted_password >"
ospf_message_digest_keys:
< id >:
hash_algorithm: < md5 | sha1 | sha 256 | sha384 | sha512 >
key: "< encrypted_password >"
pim:
ipv4:
sparse_mode: < true | false >
mac_security:
profile: < profile >
isis_enable: < ISIS Instance >
isis_passive: < boolean >
isis_metric: < integer >
isis_network_point_to_point: < boolean >
isis_circuit_type: < level-1-2 | level-1 | level-2 >
isis_hello_padding: < true | false >
isis_authentication_mode: < text | md5 >
isis_authentication_key: < type-7 encrypted password >
ptp:
enable: < true | false >
announce:
interval: < integer >
timeout: < integer >
delay_req: < integer >
delay_mechanism: < e2e | p2p >
sync_message:
interval: < integer >
role: < master | dynamic >
vlan: < all | list of vlans as string >
transport: < ipv4 | ipv6 | layer2 >
logging:
event:
link_status: < true | false >
lldp:
transmit: < true | false >
receive: < true | false >
service_profile: < qos_profile >
shape:
rate: < "< rate > kbps" | "1-100 percent" | "< rate > pps" , supported options are platform dependent >
qos:
trust: < dscp | cos | disabled >
dscp: < dscp-value >
cos: < cos-value >
priority_flow_control:
enabled: < true | false >
priorities:
- priority: < 0-7 >
no_drop: < true | false >
bfd:
interval: < rate in milliseconds >
min_rx: < rate in milliseconds >
multiplier: < 3-50 >
service_policy:
pbr:
input: < policy-map name >
mpls:
ip: < true | false >
ldp:
interface: < true | false >
igp_sync: < true | false >
lacp_timer:
mode: < fast | normal >
multiplier: < 3 - 3000 >
transceiver:
media:
override: < transceiver_type >
ip_proxy_arp: < true | false >
# EOS CLI rendered directly on the ethernet interface in the final EOS configuration
eos_cli: |
< multiline eos cli ># Switched Interfaces
ethernet_interfaces:
<Ethernet_interface_2 >:
description: < description >
shutdown: < true | false >
speed: < interface_speed | forced interface_speed | auto interface_speed >
mtu: < mtu >
l2_mtu: < l2-mtu - if defined this profile should only be used for platforms supporting the "l2 mtu" CLI >
vlans: "< list of vlans as string >"
native_vlan: <native vlan number>
mode: < access | dot1q-tunnel | trunk | "trunk phone" >
phone:
trunk: < tagged | untagged >
vlan: < 1-4094 >
trunk_groups:
- < trunk_group_name_1 >
- < trunk_group_name_2 >
l2_protocol:
encapsulation_dot1q_vlan: < vlan number >
error_correction_encoding:
enabled: < true | false | default -> true >
fire_code: < true | false >
reed_solomon: < true | false >
link_tracking_groups:
- name: < group_name >
direction: < upstream | downstream >
evpn_ethernet_segment:
identifier: < EVPN Ethernet Segment Identifier (Type 1 format) >
redundancy: < all-active | single-active >
designated_forwarder_election:
algorithm: < modulus | preference >
# preference_value and dont_preempt are set for preference algorithm and are optional
preference_value: < 0-65535 >
dont_preempt: < true | false | default -> false >
hold_time: < 1-1800 Seconds >
subsequent_hold_time: < 10-10000 milliseconds >
candidate_reachability_required: < true | false >
mpls:
shared_index: < 1-1024 >
tunnel_flood_filter_time: < 10-10000 milliseconds >
route_target: < EVPN Route Target for ESI with format xx:xx:xx:xx:xx:xx >
flowcontrol:
received: < "received" | "send" | "on" >
mac_security:
profile: < profile >
channel_group:
id: < Port-Channel_id >
mode: < "on" | "active" | "passive" >
qos:
trust: < dscp | cos | disabled >
dscp: < dscp-value >
cos: < cos-value >
spanning_tree_bpdufilter: < "enabled" | true | "disabled" >
spanning_tree_bpduguard: < "enabled" | true | "disabled" >
spanning_tree_portfast: < edge | network >
vmtracer: < true | false >
ptp:
enable: < true | false >
announce:
interval: < integer >
timeout: < integer >
delay_req: < integer >
delay_mechanism: < e2e | p2p >
sync_message:
interval: < integer >
role: < master | dynamic >
vlan: < all | list of vlans as string >
transport: < ipv4 | ipv6 | layer2 >
service_profile: < qos_profile >
profile: < interface_profile >
shape:
rate: < "< rate > kbps" | "1-100 percent" | "< rate > pps" , supported options are platform dependent >
storm_control:
all:
level: < Configure maximum storm-control level >
unit: < percent* | pps (optional and is hardware dependant - default is percent)>
broadcast:
level: < Configure maximum storm-control level >
unit: < percent* | pps (optional and is hardware dependant - default is percent)>
multicast:
level: < Configure maximum storm-control level >
unit: < percent* | pps (optional and is hardware dependant - default is percent) >
unknown_unicast:
level: < Configure maximum storm-control level >
unit: < percent* | pps (optional and is hardware dependant - default is percent)>
bfd:
interval: < rate in milliseconds >
min_rx: < rate in milliseconds >
multiplier: < 3-50 >
lacp_timer:
mode: < fast | normal >
multiplier: < 3 - 3000 >
lacp_port_priority: < 0-65535 >
lldp:
transmit: < true | false >
receive: < true | false >
ztp_vlan: < ztp vlan number >
trunk_private_vlan_secondary: < true | false >
pvlan_mapping: "< list of vlans as string >"
vlan_translations:
- from: < list of vlans as string (only one vlan if direction is "both") >
to: < vlan_id >
direction: < in | out | both | default -> both >
# EOS CLI rendered directly on the ethernet interface in the final EOS configuration
eos_cli: |
< multiline eos cli >interface_defaults:
ethernet:
shutdown: < true | false >
mtu: < mtu >switchport_default:
mode: < routed | access >
phone:
cos: < 0-7 >
trunk: < tagged | untagged >
vlan: < 1-4094 >interface_profiles:
< interface_profile_1 >:
commands:
- < command_1 >
- < command_2 >loopback_interfaces:
< Loopback_interface_1 >:
description: < description >
shutdown: < true | false >
vrf: < vrf_name >
ip_address: < IPv4_address/Mask >
ip_address_secondaries:
- < IPv4_address/Mask >
- < IPv4_address/Mask >
ipv6_enable: < true | false >
ipv6_address: < IPv6_address/Mask >
ip_proxy_arp: < true | false >
ospf_area: < ospf_area >
mpls:
ldp:
interface: < true | false >
< Loopback_interface_2 >:
description: < description >
ip_address: < IPv4_address/Mask >
isis_enable: < ISIS Instance >
isis_passive: < boolean >
isis_metric: < integer >
isis_network_point_to_point: < boolean >
node_segment:
ipv4_index: < integer >
ipv6_index: < integer >port_channel_interfaces:
< Port-Channel_interface_1 >:
description: < description >
logging:
event:
link_status: < true | false >
shutdown: < true | false >
vlans: "< list of vlans as string >"
# l3dot1q and l2dot1q are used for sub-interfaces.
# The parent interface should be defined as routed.
type: < routed | switched | l3dot1q | l2dot1q >
encapsulation_dot1q_vlan: < vlan tag to configure on sub-interface >
encapsulation_vlan:
client:
dot1q:
vlan: < Client VLAN ID >
outer: < Client Outer VLAN ID >
inner: < Client Inner VLAN ID >
unmatched: < true | false >
# network encapsulation is all optional, and skipped if using client unmatched.
network:
dot1q:
vlan: < Network VLAN ID >
outer: < Network Outer VLAN ID >
inner: < Network Inner VLAN ID >
client: < true | false >
vlan_id: < 1-4094 >
mode: < access | dot1q-tunnel | trunk | "trunk phone" >
native_vlan: < native vlan number >
link_tracking_groups:
- name: < group_name >
direction: < upstream | downstream >
phone:
trunk: < tagged | untagged >
vlan: < 1-4094 >
l2_protocol:
encapsulation_dot1q_vlan: < vlan number >
mtu: < mtu >
mlag: < mlag_id >
trunk_groups:
- < trunk_group_name_1 >
- < trunk_group_name_2 >
lacp_fallback_timeout: <timeout in seconds, 0-300 (default 90) >
lacp_fallback_mode: < individual | static >
qos:
trust: < dscp | cos | disabled >
dscp: < dscp-value >
cos: < cos-value >
bfd:
interval: < rate in milliseconds >
min_rx: < rate in milliseconds >
multiplier: < 3-50 >
service_policy:
pbr:
input: < policy-map name >
trunk_private_vlan_secondary: < true | false >
pvlan_mapping: "< list of vlans as string >"
vlan_translations:
- from: < list of vlans as string (only one vlan if direction is "both") >
to: < vlan_id >
direction: < in | out | both | default -> both >
shape:
rate: < "< rate > kbps" | "1-100 percent" | "< rate > pps" , supported options are platform dependent >
storm_control:
all:
level: < Configure maximum storm-control level >
unit: < percent* | pps (optional and is hardware dependant - default is percent)>
broadcast:
level: < Configure maximum storm-control level >
unit: < percent* | pps (optional and is hardware dependant - default is percent)>
multicast:
level: < Configure maximum storm-control level >
unit: < percent* | pps (optional and is hardware dependant - default is percent) >
unknown_unicast:
level: < Configure maximum storm-control level >
unit: < percent* | pps (optional and is hardware dependant - default is percent)>
ip_proxy_arp: < true | false >
isis_enable: < ISIS Instance >
isis_passive: < boolean >
isis_metric: < integer >
isis_network_point_to_point: < boolean >
isis_circuit_type: < level-1-2 | level-1 | level-2 >
isis_hello_padding: < true | false >
isis_authentication_mode: < text | md5 >
isis_authentication_key: < type-7 encrypted password >
# EOS CLI rendered directly on the port-channel interface in the final EOS configuration
eos_cli: |
< multiline eos cli >
< Port-Channel_interface_2 >:
description: < description >
vlans: "< list of vlans as string >"
mode: < access | dot1q-tunnel | trunk | "trunk phone" >
esi: < EVPN Ethernet Segment Identifier (Type 1 format) >
rt: < EVPN Route Target for ESI with format xx:xx:xx:xx:xx:xx >
lacp_id: < LACP ID with format xxxx.xxxx.xxxx >
< Port-Channel_interface_3 >:
description: < description >
vlans: "< list of vlans as string >"
type: < routed | switched | l3dot1q | l2dot1q >
mode: < access | dot1q-tunnel | trunk | "trunk phone" >
spanning_tree_bpdufilter: < "enabled" | true | "disabled" >
spanning_tree_bpduguard: < "enabled" | true | "disabled" >
spanning_tree_portfast: < edge | network >
vmtracer: < true | false >
ptp:
enable: < true | false >
announce:
interval: < integer >
timeout: < integer >
delay_req: < integer >
delay_mechanism: < e2e | p2p >
sync_message:
interval: < integer >
role: < master | dynamic >
vlan: < all | list of vlans as string >
transport: < ipv4 | ipv6 | layer2 >
< Port-Channel_interface_4 >:
description: < description >
mtu: < mtu >
type: < routed | switched | l3dot1q | l2dot1q >
ip_address: < IP_address/mask >
ipv6_enable: < true | false >
ipv6_address: < IPv6_address/mask >
ipv6_address_link_local: < link_local_IPv6_address/mask >
ipv6_nd_ra_disabled: < true | false >
ipv6_nd_managed_config_flag: < true | false >
ipv6_nd_prefixes:
< IPv6_address_1/Mask >:
valid_lifetime: < infinite or lifetime in seconds >
preferred_lifetime: < infinite or lifetime in seconds >
no_autoconfig_flag: < true | false >
< IPv6_address_2/Mask >:
access_group_in: < access_list_name >
access_group_out: < access_list_name >
ipv6_access_group_in: < ipv6_access_list_name >
ipv6_access_group_out: < ipv6_access_list_name >
mac_access_group_in: < mac_access_list_name >
mac_access_group_out: < mac_access_list_name >
pim:
ipv4:
sparse_mode: < true | false >
service_profile: < qos_profile >
ospf_network_point_to_point: < true | false >
ospf_area: < ospf_area >
ospf_cost: < ospf_cost >
ospf_authentication: < none | simple | message-digest >
ospf_authentication_key: "< encrypted_password >"
ospf_message_digest_keys:
< id >:
hash_algorithm: < md5 | sha1 | sha 256 | sha384 | sha512 >
key: "< encrypted_password >"vlan_interfaces:
< Vlan_id_1 >:
description: < description >
shutdown: < true | false >
vrf: < vrf_name >
arp_aging_timeout: < arp_timeout >
arp_cache_dynamic_capacity: < 0-4294967295 >
arp_gratuitous_accept: < true | false >
arp_monitor_mac_address: < true | false >
ip_proxy_arp: < true | false >
ip_address: < IPv4_address/Mask >
ip_address_secondaries:
- < IPv4_address/Mask >
- < IPv4_address/Mask >
ip_virtual_router_addresses:
- < IPv4_address/Mask | IPv4_address >
- < IPv4_address/Mask | IPv4_address >
ip_address_virtual: < IPv4_address/Mask >
ip_address_virtual_secondaries:
- < IPv4_address/Mask >
- < IPv4_address/Mask >
ip_igmp: < true | false >
ip_helpers:
< ip_helper_address_1 >:
source_interface: < source_interface_name >
vrf: < vrf_name >
< ip_helper_address_2 >:
source_interface: < source_interface_name >
ipv6_enable: < true | false >
ipv6_address: < IPv6_address/Mask >
ipv6_address_virtual: < IPv6_address/Mask >
ipv6_address_link_local: < link_local_IPv6_address/Mask >
ipv6_nd_ra_disabled: < true | false >
ipv6_nd_managed_config_flag: < true | false >
ipv6_nd_prefixes:
< IPv6_address_1/Mask >:
valid_lifetime: < infinite or lifetime in seconds >
preferred_lifetime: < infinite or lifetime in seconds >
no_autoconfig_flag: < true | false >
< IPv6_address_2/Mask >:
access_group_in: < access_list_name >
access_group_out: < access_list_name >
ipv6_access_group_in: < ipv6_access_list_name >
ipv6_access_group_out: < ipv6_access_list_name >
multicast:
ipv4:
source_route_export:
enabled: < true | false >
administrative_distance: < 1-255 >
ospf_network_point_to_point: < true | false >
ospf_area: < ospf_area >
ospf_cost: < ospf_cost >
ospf_authentication: < none | simple | message-digest >
ospf_authentication_key: "< encrypted_password >"
ospf_message_digest_keys:
< id >:
hash_algorithm: < md5 | sha1 | sha 256 | sha384 | sha512 >
key: "< encrypted_password >"
pim:
ipv4:
sparse_mode: < true | false >
local_interface: < local_interface_name >
ipv6_virtual_router_address: < IPv6_address >
isis_enable: < ISIS Instance >
isis_passive: < boolean >
isis_metric: < integer >
isis_network_point_to_point: < boolean >
mtu: < mtu >
no_autostate: < true | false >
vrrp:
virtual_router: < virtual_router_id >
priority: < instance_priority >
advertisement_interval: < advertisement_interval>
preempt_delay_minimum: < minimum_preemption_delay >
ipv4: < virtual_ip_address >
ipv6: < virtual_ip_address >
ip_attached_host_route_export:
distance: < distance >
bfd:
interval: < rate in milliseconds >
min_rx: < rate in milliseconds >
multiplier: < 3-50 >
service_policy:
pbr:
input: < policy-map name >
pvlan_mapping: "< list of vlans as string >"
# EOS CLI rendered directly on the VLAN interface in the final EOS configuration
eos_cli: |
< multiline eos cli >
< Vlan_id_2 >:
description: < description >
ip_address: < IPv4_address/Mask >vxlan_interface:
Vxlan1:
description: < description >
vxlan:
source_interface: < source_interface_name >
mlag_source_interface: < source_interface_name >
udp_port: < udp_port >
virtual_router_encapsulation_mac_address: < mlag-system-id | ethernet_address (H.H.H) >
vlans:
< vlan_id_1 >:
vni: < vni_id_1 >
multicast_group: < ip_multicast_group_address >
flood_vteps:
- < remote_vtep_1_ip_address >
- < remote_vtep_2_ip_address >
< vlan_id_2 >:
vni: < vni_id_2 >
multicast_group: < ip_multicast_group_address >
flood_vteps:
- < remote_vtep_1_ip_address >
- < remote_vtep_2_ip_address >
vrfs:
< vrf_name_1 >:
vni: < vni_id_3 >
multicast_group: < ip_multicast_group_address >
< vrf_name_2 >:
vni: < vni_id_4 >
multicast_group: < ip_multicast_group_address >
flood_vteps:
- < remote_vtep_1_ip_address >
- < remote_vtep_2_ip_address >
flood_vtep_learned_data_plane: < true | false >
# EOS CLI rendered directly on the Vxlan interface in the final EOS configuration
eos_cli: |
< multiline eos cli >vlan_internal_order:
allocation: < ascending | descending >
range:
beginning: < vlan_id >
ending: < vlan_id >ip_dhcp_relay:
information_option: < true | false >
ip_icmp_redirect: < true | false >
ipv6_icmp_redirect: < true | false >lacp:
port_id:
range:
begin: < min_port >
end: < max_port >
rate_limit:
default: < true | false >
system_priority: < 0-65535 >link_tracking_groups:
- name: < group_name >
links_minimum: < 1-100000 >
recovery_delay: < 0-3600 >lldp:
timer: < transmission_time >
timer_reinitialization: < re-init_time >
holdtime: < hold_time_period >
management_address: < all | ethernetN | loopbackN | managementN | port-channelN | vlanN >
vrf: < vrf_name >
receive_packet_tagged_drop: < true | false >
tlvs:
- name: < tlv name 1 >
transmit: < true | false >
- name: < tlv name 2 >
transmit: < true | false >
run: < true | false >mac_security:
license:
license_name: < license-name >
license_key: < license-number >
fips_restrictions: < true | false >
profiles:
< profile >:
cipher: < valid-cipher-string >
connection_keys:
"< connection_key >":
encrypted_key: "< encrypted_key >"
fallback: < true | false -> default >
mka:
session:
rekey_period: < 30-100000 in seconds >
sci: < true | false >bgp_groups:
< group_name >:
vrf: "< vrf_name >"
neighbors:
- "< ip_address >"
- "< ipv6_address >"
- "< peer_group_name >"
bgp_maintenance_profiles:
- < profile_name >interface_groups:
< group_name >:
interfaces:
- "< interface_or_interface_range >"
bgp_maintenance_profiles:
- "< profile_name >"
interface_maintenance_profiles:
- "< profile_name >"maintenance:
default_interface_profile: < interface_profile_1 >
default_bgp_profile: < bgp_profile_1 >
default_unit_profile: < unit_profile_1 >
interface_profiles:
< interface_profile_1 >:
rate_monitoring:
load_interval: < seconds >
threshold: < kbps >
shutdown:
max_delay: < seconds >
bgp_profiles:
< bgp_profile_1 >:
initiator:
route_map_inout: < route_map >
unit_profiles:
< unit_profile_1 >:
on_boot:
duration: < 300-3600 >
units:
< unit_name_1 >:
quiesce: < true | false >
profile: < unit_profile_1 >
groups:
bgp_groups:
- < bgp_group_1>
- < bgp_group_2>
interface_groups:
- < interface_group_1>
- < interface_group_2>clock:
timezone: < timezone >dns_domain: < domain_name >name_server:
source:
vrf: < vrf_name >
nodes:
- < name_server_1 >
- < name_server_2 >ip_domain_lookup:
source_interfaces:
< source_interface_1 >:
vrf: < vrf_name >domain_list:
- < domain_name_1 >
- < domain_name_2 >management_interfaces:
< Management_interface_1 >:
description: < description >
shutdown: < true | false >
vrf: < vrf_name >
ip_address: < IPv4_address/Mask >
ipv6_enable: < true | false >
ipv6_address: < IPv6_address/Mask >
type: < oob | inband | default -> oob >
# For documentation purpose only
gateway: < IPv4 address of default gateway in management VRF >
ipv6_gateway: < IPv6 address of default gateway in management VRF >management_api_http:
enable_http: < true | false >
enable_https: < true | false >
https_ssl_profile: < SSL Profile Name >
enable_vrfs:
< vrf_name_1 >:
access_group: < Standard IPv4 ACL name >
ipv6_access_group: < Standard IPv6 ACL name >
< vrf_name_2 >:
access_group: < Standard IPv4 ACL name >
ipv6_access_group: < Standard IPv6 ACL name >
protocol_https_certificate:
# Both < certificate > and < private_key > must be defined for this feature to work
certificate: < Certificate >
private_key: < Private Key >ip_http_client_source_interfaces:
- name: <interface_name_1>
vrf: <vrf_name_1>
- name: <interface_name_2>
vrf: <vrf_name_2>management_api_gnmi:
enable_vrfs:
< vrf_name_1 >:
access_group: < Standard IPv4 ACL name >
< vrf_name_2 >:
access_group: < Standard IPv4 ACL name >
octa:management_console:
idle_timeout: < 0-86400 in minutes >management_security:
entropy_source: < entropy_source >
password:
minimum_length: < 1-32 >
encryption_key_common: < true | false >
ssl_profiles:
- name: <ssl_profile_1>
tls_versions: < list of allowed tls versions as string >
certificate:
file: < certificate filename >
key: < key filename >
- name: <ssl_profile_2>
tls_versions: < list of allowed tls versions as string >management_ssh:
access_groups:
- name: < standard_acl_name_1 >:
- name: < standard_acl_name_2 >:
vrf: < vrf name >
ipv6_access_groups:
- name: < standard_acl_name_1 >:
- name: < standard_acl_name_2 >:
vrf: < vrf name >
idle_timeout: < 0-86400 in minutes >
cipher:
- < cipher1 >
- < cipher2 >
key-exchange:
- < method1 >
- < method2 >
mac:
- < mac_algorithm1 >
- < mac_algorithm2 >
hostkey:
server:
- < algorithm1 >
- < algorithm2 >
enable: < true | false >
connection:
limit: < 1-100 SSH Connections >
per_host: < 1-20 max sessions from a host >
vrfs:
< vrf_name_1 >:
enable: < true | false >
< vrf_name_2 >:
enable: < true | false >ip_ssh_client_source_interfaces:
- name: < interface_name_1 >
vrf: < vrf_name_1 | default -> "default" >
- name: < interface_name_2 >
vrf: < vrf_name_2 | default -> "default" >ntp:
local_interface:
name: < source_interface >
vrf: < vrf_name >
servers:
- name: < IP | hostname >
burst: < true | false >
iburst: < true | false >
key: < 1 - 65535 >
local_interface: < source_interface >
maxpoll: < 3 - 17 (Logarithmic) >
minpoll: < 3 - 17 (Logarithmic) >
preferred: < true | false >
version: < 1 - 4 >
vrf: < vrf_name >
authenticate: <true | false >
authentication_keys:
- id: < key_identifier | 1-65534 >
hash_algorithm: < md5 | sha1 >
key: "< type7_obfuscated_key >"
trusted_keys: "< list of trusted-keys as string ex. 10-12,15 >"mpls:
ip: < true | false >
ldp:
interface_disabled_default: < true | false >
router_id: < string >
shutdown: < true | false >
transport_address_interface: < interface_name >mlag_configuration:
domain_id: < domain_id_name >
heartbeat_interval: < milliseconds >
local_interface: < interface_name >
peer_address: < IPv4_address >
peer_address_heartbeat:
peer_ip: < IPv4_address >
vrf: < vrf_name >
dual_primary_detection_delay: < seconds >
peer_link: < Port-Channel_id >
reload_delay_mlag: < seconds >
reload_delay_non_mlag: < seconds >ip_igmp_snooping:
globally_enabled: < true | false | default -> true >
vlans:
< vlan_id >:
enabled: < true | false >globally_enabled allows to activate or deactivate IGMP snooping for all vlans where vlans allows user to activate / deactivate IGMP snooping per vlan.
router_multicast:
ipv4:
routing: < true | false >
multipath: < none | deterministic | "deterministic color" | "deterministic router-id" >
software_forwarding: < kernel | sfe >
vrfs:
- name: < vrf_name >
ipv4:
routing: < true | false >router_pim_sparse_mode:
ipv4:
ssm_range: < range >
rp_addresses:
< rp_address_1 >:
groups:
< group_prefix_1/mask >:
< group_prefix_2/mask >:
< rp_address_2 >:
anycast_rps:
< anycast_rp_address_1 >:
other_anycast_rp_addresses:
< ip_address_other_anycast_rp_1 >:
register_count: < register_count_nb >daemon_terminattr:
# Address of the gRPC server on CloudVision
# TCP 9910 is used on on-prem
# TCP 443 is used on CV as a Service
cvaddrs: # For single cluster
- < ip/fqdn >:<port>
- < ip/fqdn >:<port>
- < ip/fqdn >:<port>
clusters: # For multiple cluster support
< cluster_name >:
cvaddrs:
- < ip/fqdn >:<port>
- < ip/fqdn >:<port>
- < ip/fqdn >:<port>
cvauth:
method: < "token" | "token-secure" | "key" >
key: < key >
token_file: < path | e.g. "/tmp/token" >
cvobscurekeyfile: < true | false >
cvproxy: < URL >
cvsourceip: < IP Address >
cvvrf: < vrf >
# Authentication scheme used to connect to CloudVision
cvauth:
method: < "token" | "token-secure" | "key" >
key: < key >
token_file: < path | e.g. "/tmp/token" >
# The default compression scheme when streaming to CloudVision is gzip since TerminAttr 1.6.1 and CVP 2019.1.0. There is no need to change the compression scheme.
# Encrypt the private key used for authentication to CloudVision
cvobscurekeyfile: < true | false >
# Proxy server through which CloudVision is reachable. Useful when the CloudVision server is hosted in the cloud.
# The expected form is http://[user:password@]ip:port, e.g.: 'http://arista:[email protected]:3128'
# Available as of TerminAttr v1.13.0
cvproxy: < URL >
# set source IP address in case of in-band managament
cvsourceip: < IP Address >
# Name of the VRF to use to connect to CloudVision
cvvrf: < vrf >
# Stream states from EOS GNMI servers (Openconfig) to CloudVision
# Available as of TerminAttr v1.13.1
cvgnmi: < true | false >
# Disable AAA authorization and accounting. When setting this flag, all commands pushed
# from CloudVision are applied directly to the CLI without authorization
disable_aaa: < true | false >
# Set the gRPC server address, the default is 127.0.0.1:6042
grpcaddr: < string | e.g. "MGMT/0.0.0.0:6042" >
# gNMI read-only mode – Disable gnmi.Set()
grpcreadonly: < true | false >
# Exclude paths from Sysdb on the ingest side
ingestexclude: < string | e.g. "/Sysdb/cell/1/agent,/Sysdb/cell/2/agent" >
# Exclude paths from the shared memory table
smashexcludes: < string | e.g. "ale,flexCounter,hardware,kni,pulse,strata" >
# Enable log file collection; /var/log/messages is streamed by default if no path is set.
taillogs: < path | e.g. "/var/log/messages" >
# ECO DHCP Collector address or ECO DHCP Fingerprint listening addressin standalone mode (default "127.0.0.1:67")
ecodhcpaddr: < IPV4_address:port >
# Enable IPFIX provider (default true)
# This flag is enabled by default and does not have to be added to the daemon configuration.
ipfix: < true | false >
# ECO IPFIX Collector address to listen on to receive IPFIX packets (default "127.0.0.1:4739")
# This flag is enabled by default and does not have to be added to the daemon configuration
ipfixaddr: < IPV4_address:port >
# Enable sFlow provider (default true)
# This flag is enabled by default and does not have to be added to the daemon configuration
sflow: < true | false >
# ECO sFlow Collector address to listen on to receive sFlow packets (default "127.0.0.1:6343")
# This flag is enabled by default and does not have to be added to the daemon configuration
sflowaddr: < IPV4_address:port >You can either provide a list of IPs/FQDNs to target on-premise Cloudvision cluster or use DNS name for your Cloudvision as a Service instance. Streaming to multiple clusters both on-prem and cloud service is supported.
Note For TerminAttr version recommendation and EOS compatibility matrix, please refer to the latest TerminAttr Release Notes which always contain the latest recommended versions and minimum required versions per EOS release.
daemons:
< daemon_name >:
exec: "< command to run as a daemon >"
enabled: "< true | false | default -> true >"This will add a daemon to the eos configuration that is most useful when trying to run OpenConfig clients like ocprometheus
monitor_connectivity:
shutdown: < true | false >
interval: < probing_interval >
interface_sets:
- name: < interface_set >
# Interface range(s) should be of same type, Ethernet, Loopback, Management etc.
# Multiple interface ranges can be specified separated by ","
interfaces: < interface_or_interface_range(s) >
local_interfaces: < interface_set_name >
hosts:
- name: < host_name >
description: < description >
ip: < ipv4 >
local_interfaces: < interface_set_name >
url: < url >
vrfs:
- name: < vrf_name >
description: < description >
interface_sets:
- name: < interface_set >
interfaces: < interface_or_interface_range(s) >
local_interfaces: < interface_set_name >
hosts:
- name: < host_name >
description: < description >
ip: < ipv4 >
local_interfaces: < interface_set_name >
url: < url >### Event Handler ###
event_handlers:
< event_handler_name >:
action_type: < Type of action. [bash, increment, log] >
action: < Command to execute >
delay: < Event-handler delay in seconds >
trigger: < Configure event trigger condition. Only supports on-logging >
regex: < Regular expression to use for searching log messages. Required for on-logging trigger >
asynchronous: < Set the action to be non-blocking. if unset, default is False >event_monitor:
enabled: < true | false >load_interval:
default: < seconds >logging:
console: < "<severity_level>" | "disabled" >
monitor: < "<severity_level>" | "disabled" >
buffered:
size: < messages_nb (minimum of 10) >
level: < "<severity_level>" | "disabled" >
trap: < "<severity_level>" | "disabled" >
synchronous:
level: < "<severity_level>" | "disabled" | default --> critical >
format:
timestamp: < high-resolution | traditional >
hostname: < fqdn | ipv4 >
sequence_numbers: < true | false >
source_interface: < source_interface_name >
vrfs:
< vrf_name >:
source_interface: < source_interface_name >
hosts:
< syslog_server_1 >:
protocol: < tcp | udp (default udp) >
ports:
- < custom_port_1 >
- < custom_port_2 >
< syslog_server_2 >:
ports:
- < custom_port_1 >
policy:
match:
match_lists:
< match_list >:
action: < discard >sflow:
sample: < sample_rate >
dangerous: < true | false >
vrfs:
<vrf_name_1>:
destinations:
< sflow_destination_ip_1>:
< sflow_destination_ip_2>:
port: < port_number >
source_interface: < source_interface >
<vrf_name_2>:
destinations:
< sflow_destination_ip_1>:
source_interface: < source_interface >
destinations:
< sflow_destination_ip_1 >:
port: < port_number >
< sflow_destination_ip_2 >:
source_interface: < source_interface >
run: < true | false >snmp_server:
contact: < contact_name >
location: < location >
communities:
< community_name_1 >:
access: < ro | rw >
access_list_ipv4:
name: < acl_ipv4_name >
access_list_ipv6:
name: < acl_ipv6_name >
view: < view_name >
< community_name_2 >:
access: < ro | rw >
access_list_ipv4:
name: < acl_ipv4_name >
access_list_ipv6:
name: < acl_ipv6_name >
view: < view_name >
ipv4_acls:
- name: < ipv4-access-list >
vrf: < vrf >
- name: < ipv4-access-list >
ipv6_acls:
- name: < ipv6-access-list >
vrf: < vrf >
- name: < ipv6-access-list >
local_interfaces:
< interface_name_1 >:
vrf: < vrf_name >
< interface_name_2 >:
< interface_name_3 >:
vrf: < vrf_name >
views:
- name: < view_name >
MIB_family_name: < MIB_family_name >
included: < true | false >
- name: < view_name >
MIB_family_name: < MIB_family_name >
included: < true | false >
groups:
- name: < group_name >
version: < v1 | v2c | v3 >
authentication: < auth | noauth | priv >
read: < read_view >
write: < write_view >
notify: < notify_view >
- name: < group_name >
version: < v1 | v2c | v3 >
authentication: < auth | noauth | priv >
read: < read_view >
users:
- name: < username >
group: < group_name >
version: < v1 | v2c | v3 >
auth: < hash_algorithm >
auth_passphrase: < encrypted_auth_passphrase >
priv: < encryption_algorithm >
priv_passphrase: < encrypted_priv_passphrase >
- name: < username >
group: < group_name >
version: < v1 | v2c | v3 >
hosts:
- host: < host IP address or name >
vrf: < vrf_name >
version: < 1 | 2c | 3 >
community: < community_name >
users:
- username: < username >
authentication_level: < auth | noauth | priv >
- host: < host IP address or name >
vrf: < vrf_name >
community: < community_name >
users:
- username: < username >
authentication_level: < auth | noauth | priv >
traps:
# Enable or disable all snmp-traps
enable: < true | false | default -> false >
# Enable or disable specific snmp-traps and their sub_traps
snmp_traps:
- name: < snmp_trap_type | snmp_trap_type snmp_sub_trap_type >
enabled: < true | false | default -> true >
- name: < snmp_trap_type | snmp_trap_type snmp_sub_trap_type >
vrfs:
- name: < vrf_name >
enable: < true | false >
- name: < vrf_name >
enable: < true | false >monitor_sessions:
- name: < session_name_1 >
sources:
- name: < interface_name, range or comma separated list >
direction: < rx | tx | both >
access_group:
type: < ip | ipv6 | mac >
name: < acl_name >
priority: < priority >
destinations:
- < interface(s) | cpu >
encapsulation_gre_metadata_tx: < true | false >
header_remove_size: < bytes >
access_group:
type: < ip | ipv6 | mac >
name: < acl_name >
rate_limit_per_ingress_chip: < "<int> bps" | "<int> kbps" | "<int> mbps" >
rate_limit_per_egress_chip: < "<int> bps" | "<int> kbps" | "<int> mbps" >
sample: < int >
truncate:
enabled: < true | false >
size: < bytes >system:
control_plane:
tcp_mss:
ipv4: < Segment size >
ipv6: < Segment size >
ipv4_access_groups:
- acl_name: < access-list name >
vrf: < Optional vrf field >
ipv6_access_groups:
- acl_name: < access-list name >
vrf: < Optional vrf field >vmtracer_sessions:
< vmtracer_session_name_1 >:
url: < url >
username: < username >
password: "< encrypted_password >"
autovlan_disable: < true | false >
source_interface: < interface_name >
< vmtracer_session_name_2 >:
url: < url >
username: < username >
password: "< encrypted_password >"patch_panel:
patches:
- name: < name >
enabled: < true | false >
connectors:
# Must have exactly two connectors to a patch of which at least one must be of type "interface"
- id: < string or integer >
type: < interface | pseudowire >
endpoint: < interface_name | interface_name dot1q vlan 123 | bgp vpws TENANT_A pseudowire WPWS_PW_1 | ldp LDP_PW_1 >
- id: < string or integer >
type: < interface | pseudowire >
endpoint: < interface_name | interface_name dot1q vlan 123 | bgp vpws TENANT_A pseudowire WPWS_PW_1 | ldp LDP_PW_1 >ptp:
mode: < mode >
forward_unicast: < true | false >
clock_identity: < clock-id >
source:
ip: < source-ip>
priority1: < priority1 >
priority2: < priority2 >
ttl: < ttl >
domain: < integer >
message_type:
general:
dscp: < dscp-value >
event:
dscp: < dscp-Value >
monitor:
threshold:
offset_from_master: < offset >
mean_path_delay: < delay >prompt: <string >qos:
map:
cos:
- "< cos_mapping_to_tc >"
- "< cos_mapping_to_tc >"
dscp:
- "< dscp_mapping_to_tc >"
- "< dscp_mapping_to_tc >"
traffic_class:
- "< tc_mapping_to_cos >"
- "< tc_mapping_to_dscp >"
- "< tc_mapping_to_tx_queue >"
rewrite_dscp: < true | false >class_maps:
pbr:
< class-map name >:
ip:
access_group: < Standard access-list name >
qos:
< class-map name >:
vlan: < VLAN value(s) or range(s) of VLAN values >
cos: < CoS value(s) or range(s) of CoS values >
ip:
access_group: < Standard access-list name >policy_maps:
pbr:
< policy-map name >:
classes:
< class name >:
set:
nexthop:
ip_address: < IPv4_address | IPv6_address >
recursive: < true | false >
qos:
< policy-map name >:
classes:
< class name >:
set:
dscp: < dscp-code >
traffic_class: < traffic-class ID >
drop_precedence: < drop-precedence value >qos_profiles:
< profile-1 >:
trust: < dscp | cos | disabled >
cos: < cos-value >
dscp: < dscp-value >
shape:
rate: < "< rate > kbps" | "1-100 percent" | "< rate > pps" , supported options are platform dependent >
tx_queues:
< tx-queue-id >:
bandwidth_percent: < value >
# The below knob is platform dependent
bandwidth_guaranteed_percent: < value >
priority: < string >
shape:
rate: < "< rate > kbps" | "1-100 percent" | "< rate > pps" , supported options are platform dependent >
< tx-queue-id >:
bandwidth_percent: < value >
priority: < string >
shape:
rate: < "< rate > kbps" | "1-100 percent" | "< rate > pps" , supported options are platform dependent >
< profile-2 >:
trust: < dscp | cos | disabled >
cos: < cos-value >
dscp: < dscp-value >
tx_queues:
< tx-queue-id >:
bandwidth_percent: < value >
priority: < string >
< tx-queue-id >:
bandwidth_percent: < value >
priority: < string >queue_monitor_length:
log: < seconds >
notifying: < true | false - should only be used for platforms supporting the "queue-monitor length notifying" CLI >queue_monitor_streaming:
enable: < true | false >
ip_access_group: < access_list_name >
ipv6_access_group: < ipv6_access_list_name >
max_connections: < 1-100 >
vrf: < vrf_name >arp:
aging:
timeout_default: < timeout-in-seconds >mac_address_table:
aging_time: < aging_time_in_seconds >ip_virtual_router_mac_address: < mac_address (hh:hh:hh:hh:hh:hh) >ip_routing: < true | false >ipv6_unicast_routing: < true | false >
ip_routing_ipv6_interfaces: < true | false >router_general:
vrfs:
< destination-vrf >:
leak_routes:
- source_vrf: < source-vrf >
subscribe_policy: < route-map policy >
- source_vrf: < source-vrf >
subscribe_policy: < route-map policy >router_bgp:
as: < bgp_as >
router_id: < IPv4_address >
distance:
external_routes: < 1-255 >
internal_routes: < 1-255 >
local_routes: < 1-255 >
maximum_paths:
paths: < 1-600 >
ecmp: < 1-600 >
updates:
wait_for_convergence: < true | false >
wait_install: < true | false >
bgp_cluster_id: < IPv4_address >
bgp_defaults:
- "< bgp command as string >"
- "< bgp command as string >"
bgp:
bestpath:
d_path: < true | false >
peer_groups:
< peer_group_name_1>:
type: < ipv4 | evpn >
remote_as: < bgp_as >
local_as: < bgp_as >
description: "< description as string >"
shutdown: < true | false >
peer_filter: < peer_filter >
next_hop_unchanged: < true | false >
update_source: < interface >
route_reflector_client: < true | false >
bfd: < true | false >
ebgp_multihop: < integer >
next_hop_self: < true | false >
password: "< encrypted_password >"
send_community: < standard | extended | large | all >
maximum_routes: < integer >
maximum_routes_warning_limit: < "<integer>" | "<0-100> percent" >
maximum_routes_warning_only: < true | false >
allowas_in:
enabled: < true | false >
times: < 1-10 >
weight: < weight_value >
timers: < keepalive_hold_timer_values >
route_map_in: < inbound route-map >
route_map_out: < outbound route-map >
< peer_group_name_2 >:
type: < ipv4 | evpn >
bgp_listen_range_prefix: < IP prefix range >
peer_filter: < peer_filter >
password: "< encrypted_password >"
maximum_routes: < integer >
neighbors:
< IPv4_address_1 >:
peer_group: < peer_group_name >
remote_as: < bgp_as >
local_as: < bgp_as >
description: "< description as string >"
shutdown: < true | false >
update_source: < interface >
bfd: < true | false >
weight: < weight_value >
timers: < keepalive_hold_timer_values >
route_map_in: < inbound route-map >
route_map_out: < outbound route-map >
send_community: < all | extended | large | standard >
maximum_routes: < integer >
maximum_routes_warning_limit: < "<integer>" | "<0-100> percent" >
maximum_routes_warning_only: < true | false >
allowas_in:
enabled: < true | false >
times: < 1-10 >
< IPv4_address_2 >:
remote_as: < bgp_as >
next_hop_self: < true | false >
password: "< encrypted_password >"
< IPv6_address_1 >:
remote_as: < bgp_as >
neighbor_interfaces:
< interface >:
peer_group: < peer_group_name >
remote_as: < bgp_as >
description: "< description as string >"
aggregate_addresses:
< aggregate_address_1/mask >:
advertise_only: < true | false >
< aggregate_address_2/mask >:
< aggregate_address_3/mask >:
as_set: < true | false >
summary_only: < true | false >
attribute_map: < route_map_name >
match_map: < route_map_name >
advertise_only: < true | false >
redistribute_routes:
< route_type >:
route_map: < route_map_name >
< route_type >:
route_map: < route_map_name >
vlan_aware_bundles:
< vlan_aware_bundle_name_1 >:
rd: "< route distinguisher >"
rd_evpn_domain:
domain: < all | remote >
rd: "< route distinguisher >"
route_targets:
both:
- "< route_target >"
import:
- "< route_target >"
- "< route_target >"
export:
- "< route_target >"
- "< route_target >"
import_evpn_domains:
- domain: < all | remote >
route_target: "< route_target >"
export_evpn_domains:
- domain: < all | remote >
route_target: "< route_target >"
import_export_evpn_domains:
- domain: < all | remote >
route_target: "< route_target >"
redistribute_routes:
- < learned >
no_redistribute_routes:
- < host-route >
vlan: < vlan_range >
< vlan_aware_bundle_name_2 >:
rd: "< route distinguisher >"
route_targets:
both:
- "< route_target >"
import:
- "< route_target >"
- "< route_target >"
export:
- "< route_target >"
- "< route_target >"
import_evpn_domains:
- domain: < all | remote >
route_target: "< route_target >"
export_evpn_domains:
- domain: < all | remote >
route_target: "< route_target >"
redistribute_routes:
- < connected >
- < learned >
vlan: < vlan_range >
vlans:
< vlan_id_1>:
rd: "< route distinguisher >"
rd_evpn_domain:
domain: < all | remote >
rd: "< route distinguisher >"
route_targets:
both:
- "< route_target >"
import:
- "< route_target >"
- "< route_target >"
export:
- "< route_target >"
- "< route_target >"
import_evpn_domains:
- domain: < all | remote >
route_target: "< route_target >"
export_evpn_domains:
- domain: < all | remote >
route_target: "< route_target >"
import_export_evpn_domains:
- domain: < all | remote >
route_target: "< route_target >"
redistribute_routes:
- < connected >
- < learned >
no_redistribute_routes:
- < host-route >
< vlan_id_2 >:
rd: "< route distinguisher >"
route_targets:
import:
- "< route_target >"
- "< route_target >"
export:
- "< route_target >"
- "< route_target >"
redistribute_routes:
- < connected >
- < learned >
vpws:
- name: < vpws instance name >
rd: < route distinguisher >
route_targets:
import_export: < route target >
pseudowires:
- name: < pseudowire name >
id_local: < integer, must match id_remote on other pe >
id_remote: < integer, must match id_local on other pe >
address_family_evpn:
domain_identifier: < string >
neighbor_default:
encapsulation: < vxlan | mpls >
next_hop_self_source_interface: < source interface >
next_hop_self_received_evpn_routes:
enable: < true | false >
inter_domain: < true | false >
peer_groups:
< peer_group_name >:
activate: < true | false >
route_map_in: < route_map_name >
route_map_out: < route_map_name >
domain_remote: < true | false >
evpn_hostflap_detection:
enabled: < true | false >
threshold: < integer >
window: < integer >
route:
import_match_failure_action: < 'discard' >
address_family_rtc:
peer_groups:
< peer_group_name >:
activate: < true | false >
default_route_target:
only: < true | false >
encoding_origin_as_omit:
address_family_ipv4:
networks:
< prefix_ipv4 >:
route_map: < route_map_name >
peer_groups:
< peer_group_name >:
route_map_in: < route_map_name >
route_map_out: < route_map_name >
activate: < true | false >
< peer_group_name >:
activate: < true | false >
prefix_list_in: < prefix_list_name >
prefix_list_out: < prefix_list_name >
default_originate:
always: < true | false >
route_map: < route_map_name >
next_hop:
address_family_ipv6_originate: < true | false >
neighbors:
< neighbor_ip_address>:
route_map_in: < route_map_name >
route_map_out: < route_map_name >
activate: < true | false >
prefix_list_in: < prefix_list_name >
prefix_list_out: < prefix_list_name >
< neighbor_ip_address>:
activate: < true | false >
default_originate:
always: < true | false >
route_map: < route_map_name >
address_family_ipv4_multicast:
peer_groups:
< peer_group_name >:
route_map_in: < route_map_name >
route_map_out: < route_map_name >
activate: < true | false >
< peer_group_name >:
activate: < true | false >
neighbors:
< neighbor_ip_address >:
route_map_in: < route_map_name >
route_map_out: < route_map_name >
activate: < true | false >
redistribute_routes:
< route_type >:
route_map: < route_map_name >
address_family_ipv6:
networks:
< prefix_ipv6 >:
route_map: < route_map_name >
peer_groups:
< peer_group_name >:
activate: < true | false >
route_map_in: < route_map_name >
route_map_out: < route_map_name >
prefix_list_in: < prefix_list_name >
prefix_list_out: < prefix_list_name >
< peer_group_name >:
activate: true
neighbors:
< neighbor_ip_address >:
route_map_in: < route_map_name >
route_map_out: < route_map_name >
prefix_list_in: < prefix_list_name >
prefix_list_out: < prefix_list_name >
activate: < true | false >
redistribute_routes:
< route_type >:
route_map: < route_map_name >
< route_type >:
route_map: < route_map_name >
address_family_vpn_ipv4:
domain_identifier: < string >
peer_groups:
< peer_group_name >:
activate: < true | false >
neighbors:
< neighbor_ip_address >:
activate: < true | false >
neighbor_default_encapsulation_mpls_next_hop_self:
source_interface: < interface >
address_family_vpn_ipv6:
domain_identifier: < string >
peer_groups:
< peer_group_name >:
activate: < true | false >
neighbors:
< neighbor_ip_address >:
activate: < true | false >
neighbor_default_encapsulation_mpls_next_hop_self:
source_interface: < interface >
vrfs:
< vrf_name_1 >:
rd: "< route distinguisher >"
evpn_multicast: < true | false >
route_targets:
import:
< address_family >:
- "< route_target >"
- "< route_target >"
< address_family >:
- "< route_target >"
- "< route_target >"
export:
< address_family >:
- "< route_target >"
- "< route_target >"
router_id: < IPv4_address >
timers: < keepalive_hold_timer_values >
networks:
< prefix_ipv4 >:
route_map: < route_map_name >
neighbors:
< neighbor_ip_address >:
remote_as: < asn >
peer_group: < peer_group_name >
password: "< encrypted_password >"
weight: < weight_value >
local_as: < asn >
description: < description >
ebgp_multihop: < integer >
next_hop_self: < true | false >
bfd: < true | false >
timers: < keepalive_hold_timer_values >
send_community: < standard | extended | large | all >
maximum_routes: < integer >
maximum_routes_warning_limit: < "<integer>" | "<0-100> percent" >
maximum_routes_warning_only: < true | false >
allowas_in:
enabled: < true | false >
times: < 1-10 >
default_originate:
always: < true | false >
route_map: < route_map_name >
update_source: < interface >
route_map_out: < route-map name >
route_map_in: < route-map name >
prefix_list_in: < prefix_list_name >
prefix_list_out: < prefix_list_name >
< neighbor_ip_address >:
remote_as: < asn >
description: < description >
next_hop_self: < true | false >
timers: < keepalive_hold_timer_values >
send_community: < standard | extended | large | all >
redistribute_routes:
< route_type >:
route_map: < route_map_name >
< route_type >:
route_map: < route_map_name >
aggregate_addresses:
< aggregate_address_1/mask >:
advertise_only: < true | false >
< aggregate_address_2/mask >:
< aggregate_address_3/mask >:
as_set: < true | false >
summary_only: < true | false >
attribute_map: < route_map_name >
match_map: < route_map_name >
advertise_only: < true | false >
address_families:
< address_family >:
neighbors:
< neighbor_ip_address >:
activate: < true | false >
networks:
< prefix_address >:
route_map: < route_map_name >
# EOS CLI rendered directly on the Router BGP, VRF definition in the final EOS configuration
eos_cli: |
< multiline eos cli >
< vrf_name_2 >:
rd: "<route distinguisher >"
route_targets:
import:
< address_family >:
- "< route_target >"
- "< route_target >"
< address_family >:
- "< route_target >"
- "< route_target >"
export:
< address_family >:
- "< route_target >"
- "< route_target >"
redistribute_routes:
< route_type >:
route_map: < route_map_name >
< route_type >:
route_map: < route_map_name >router_igmp:
ssm_aware: < true | false >router_ospf:
process_ids:
< process_id >:
vrf: < vrf_name_for_process_id >
passive_interface_default: < true | false >
router_id: < IPv4_address >
distance:
external: < 1-255 >
inter_area: < 1-255 >
intra_area: < 1-255 >
log_adjacency_changes_detail: < true | false >
network_prefixes:
< IPv4 subnet / netmask >:
area: < area >
< IPv4 subnet / netmask >:
area: < area >
bfd_enable: < true | false >
no_passive_interfaces:
- < interface_1 >
- < interface_2 >
distribute_list_in:
route_map: < route_map >
max_lsa: < integer >
timers:
lsa:
rx_min_interval: < 0-600000 - Min interval in msecs between accepting the same LSA >
tx_delay:
initial: < 0-600000 - Delay to generate first occurrence of LSA in msecs >
min: < 1-600000 Min delay between originating the same LSA in msecs >
max: < 1-600000 Maximum delay between originating the same LSA in msecs >
spf_delay:
initial: < 0-600000 - Initial SPF schedule delay in msecs >
min: < 0-65535000 Min Hold time between two SPFs in msecs >
max: < 0-65535000 Max wait time between two SPFs in msecs >
default_information_originate:
always: true
summary_addresses:
- prefix: < summary_prefix_01 >
tag: < string >
- prefix: < summary_prefix_02 >
attribute_map: < string >
- prefix: < summary_prefix_03 >
not_advertise: < true >
- prefix: < summary_prefix_04 >
- prefix: < summary_prefix_05 >
redistribute:
static:
route_map: < route_map_name >
connected:
route_map: < route_map_name >
bgp:
route_map: < route_map_name >
auto_cost_reference_bandwidth: < bandwidth in mbps >
areas:
< area >:
filter:
networks:
- < IPv4 subnet / netmask >
- < IPv4 subnet / netmask >
prefix_list: < prefix list name >
< area >:
type: < normal | stub | nssa | default -> normal >
no_summary: < true | false >
nssa_only: < true | false >
default_information_originate:
metric: < Integer 1-65535 > # Value of the route metric
metric_type: < 1 | 2 > # OSPF metric type
maximum_paths: < Integer 1-32 >
max_metric:
router_lsa:
external_lsa:
override_metric: < Integer 1-16777215 >
include_stub: < true | false >
on_startup: < "wait-for-bgp" | Integer 5-86400 >
summary_lsa:
override_metric: < Integer 1-16777215 >
mpls_ldp_sync_default: < true | false >router_isis:
instance: < ISIS Instance Name >
net: < CLNS Address to run ISIS | format 49.0001.0001.0000.0001.00 >
router_id: < IPv4_address >
is_type: < level-1 | level-1-2 | level-2 >
log_adjacency_changes: < true | false >
mpls_ldp_sync_default: < true | false >
timers:
local_convergence:
protected_prefixes: < true | false >
delay: < number of milliseconds (Optional, default is 10000) >
advertise:
passive_only: < true | false >
address_family: < List of Address Families >
isis_af_defaults:
- maximum-paths < Integer 1-128 >
address_family_ipv4:
maximum_paths: < Integer 1-128 >
fast_reroute_ti_lfa:
mode: < link-protection | node-protection >
level: < level-1 | level-2 >
srlg:
enable: < true | false >
strict: < true | false >
address_family_ipv6:
maximum_paths: < Integer 1-128 >
fast_reroute_ti_lfa:
mode: < link-protection | node-protection >
level: < level-1 | level-2 (Optional, default is to protect all levels) >
srlg:
enable: < true | false >
strict: < true | false >
segment_routing_mpls:
enabled: < true | false >
router_id: < router_id >service_routing_configuration_bgp:
no_equals_default: < true | false >service_routing_protocols_model: < multi-agent | ribd >static_routes:
- vrf: < vrf_name, if vrf_name = default the route will be placed in the GRT >
destination_address_prefix: < IPv4_network/Mask >
interface: < interface >
gateway: < IPv4_address >
distance: < 1-255 >
tag: < 0-4294967295 >
name: < description >
metric: < 0-4294967295 >
- destination_address_prefix: < IPv4_network/Mask >
gateway: < IPv4_address >ipv6_static_routes:
- vrf: < vrf_name, if vrf_name = default the route will be placed in the GRT >
destination_address_prefix: < IPv6_network/Mask >
interface: < interface >
gateway: < IPv6_address >
distance: < 1-255 >
tag: < 0-4294967295 >
name: < description >
metric: < 0-4294967295 >
- destination_address_prefix: < IPv6_network/Mask >
gateway: < IPv6_address >vrfs:
< vrf_name >:
description: < description>
ip_routing: < true | false >
ipv6_routing: < true | false >
< vrf_name >:
description: < description>
ip_routing: < true | false >
ipv6_routing: < true | false >router_l2_vpn:
nd_rs_flooding_disabled: < true | false >
virtual_router_nd_ra_flooding_disabled: < true | false >
arp_selective_install: < true | false >
arp_proxy:
prefix_list: < prefix_list_name >spanning_tree:
root_super: < true | false >
edge_port:
bpdufilter_default: < true | false >
bpduguard_default: < true | false >
mode: < mstp | rstp | rapid-pvst | none >
rstp_priority: < priority >
mst:
pvst_border: < true | false >
configuration:
name: < name >
revision: < 0-65535 >
instances:
"< instance_id >":
vlans: "< vlan_id >, < vlan_id >-< vlan_id >"
"< instance_id >":
vlans: "< vlan_id >, < vlan_id >-< vlan_id >"
mst_instances:
"< instance_id >":
priority: < priority >
"< instance_id >":
priority: < priority >
no_spanning_tree_vlan: "< vlan_id >, < vlan_id >-< vlan_id >"
rapid_pvst_instances:
"< vlan_id >":
priority: < priority >
"< vlan_id >, < vlan_id >-< vlan_id >":
priority: < priority >terminal:
length: < 0-32767 >
width: < 0-32767 >traffic_policies:
options:
counter_per_interface: < true | false >
field_sets:
ipv4:
< PREFIX FIELD SET NAME >:
- < IPv4 prefix 01>
- < IPv4 prefix 02>
- < IPv4 prefix 03>
ipv6:
< PREFIX FIELD SET NAME >:
- < IPv6 prefix 01>
- < IPv6 prefix 02>
- < IPv6 prefix 03>
ports:
< L4 PORT FIELD SET NAME >: "< vlan range >"
policies:
< TRAFFIC POLICY NAME >:
matches:
< TRAFFIC POLICY ITEM >:
type: < ipv4 | ipv6 >
source:
prefixes:
- < prefix 01 >
- < prefix 02 >
prefix_lists:
- < Field Set List 01 >
- < Field Set List 02 >
destination:
prefixes:
- < prefix 01 >
- < prefix 02 >
prefix_lists:
- < Field Set List 01 >
- < Field Set List 02 >
ttl: "< ttl range>"
# The 'fragment' command is not supported when 'source port'
# or 'destination port' command is configured
fragment:
offset: "< fragment offset range >"
protocols:
tcp:
src_port: "< port range >"
dst_port: "< port range >"
src_field: "< L4 port range field set >"
dst_field: "< L4 port range field set >"
flags:
- established
- initial
icmp:
icmp_type:
- < ICMP message type >
- < ICMP message type >
udp:
src_port: "< port range >"
dst_port: "< port range >"
src_field: "< L4 port range field set >"
dst_field: "< L4 port range field set >"
ahp:
bgp:
icmp:
igmp:
ospf:
pim:
rsvp:
vrrp:
# The 'protocol neighbors' subcommand is not supported when any
# other match subcommands are configured
neighbors:
actions:
dscp: < dscp code value >
traffic_class: < traffic class id >
count: < counter name >
drop: < true | false (default false) >
# Only supported when action is set to drop
log: < true | false (default false) >
# Last resort policy
default_actions:
< ipv4 | ipv6 >:
dscp: < dscp code value >
traffic_class: < traffic class id >
count: < counter name >
drop: < true | false (default false) >
# Only supported when action is set to drop
log: < true | false (default false) >virtual_source_nat_vrfs:
< vrf_name_1 >:
ip_address: < IPv4_address >
< vrf_name_2 >:
ip_address: < IPv4_address >vlans:
< vlan_id >:
name: < vlan_name >
state: < active | suspend >
trunk_groups:
- < trunk_group_name_1 >
- < trunk_group_name_2 >
private_vlan:
type: < community | isolated >
primary_vlan: < vlan_id >
< vlan_id >:
name: < vlan_name >The AVD major releases can contain breaking changes to the data models.
Data model changes requires a change to the group_vars and host_vars. To help identify needed changes and provide a smoother transition, the AVD 3.0 eos_cli_config_gen
role can provide automatic upgrade of the data model for AVD 2.x to 3.0 upgrades.
To leverage this upgrade functionality, the playbook must include tasks_from: upgrade or tasks_from: upgrade-and-run for the import_role of eos_cli_config_gen. Using upgrade alone will output the upgraded data files as described below. upgrade-and-run will also
run the regular eos_cli_config_gen tasks after upgrading the data model.
The upgraded data will be saved in {{ inventory_dir }}/eos_cli_config_gen_upgrade_2.x_to_3.0 directory.
The user should then replace the old data structures manually in group_vars and host_vars files as applicable until no files are created in the upgrade directory when
running the playbook. After all data has been upgraded, the tasks_from: upgrade can be removed again.
This eos_cli_config_gen upgrade feature is not required when using eos_designs. Upgrade should be done on eos_designs instead.
See README for details on the eos_designs upgrade feature.
To support future upgrades the relevant upgrade tasks can be chosen using a new upgrade setting.
avd_eos_cli_config_gen_upgrade: < "2.x-to-3.0" | default -> "2.x-to-3.0" >Running upgrade only
---
- hosts: DC1_FABRIC
tasks:
- name: Run AVD eos_cli_config_gen
import_role:
tasks_from: upgrade
name: arista.avd.eos_cli_config_genRunning upgrade and the regular eos_cli_config_gen tasks
---
- hosts: DC1_FABRIC
tasks:
- name: Run AVD eos_cli_config_gen
import_role:
tasks_from: upgrade-and-run
name: arista.avd.eos_cli_config_genAlternative with separate tasks:
---
- hosts: DC1_FABRIC
tasks:
- name: Upgrade AVD eos_cli_config_gen data model
import_role:
tasks_from: upgrade
name: arista.avd.eos_cli_config_gen
- name: Run AVD eos_cli_config_gen
import_role:
name: arista.avd.eos_cli_config_genProject is published under Apache 2.0 License