[Bug]: Docker Logging doesnt seem to work properly in v3.0.0-beta-0.3 #956

nickchomey · 2023-01-28T02:44:03Z

Have you already looked into this bug?

I have checked the Troubleshooting Guide
I have checked Release notes for potential migration steps
I have checked existing issues for similar bugs
I have googled this bug already with no luck
I have not done any of the above

(Optional) Error message

No response

What went wrong?

In the latest version of devilbox (or, perhaps in all of the 3.0 versions), once the Devilbox containers are up and running, there isn't any HTTPD logging. Howeverm, there was HTTPD logging in 2.4.0.

Mysql doesnt seem to do any docker logging either - same thing happened in 2.4.0

Also, the documentation in .env says there are now two new debugging levels. But setting DEBUG_ENTRYPOINT to either 3 or 4 doesn't seem to do anything. Moreover, ./check-config.sh says [ERR] Variable 'DEBUG_ENTRYPOINT' should be 0, 1 or 2. Has: 4. I have submitted a PR #957 to fix what just appear to be some typos.

However, again, the problem still remains that I don't see any difference between the logs from levels 1-4

Expected behaviour

Logging to work

How can we reproduce the bug?

Presumably just try different logging variables

Host Operating System

Linux

Host Platform (amd64, arm64, other)

amd64

(Linux only) Is SELinux enabled?

No, SELinux is disabled

Docker version

Docker version 20.10.23, build 7155243

Docker Compose version

Docker Compose version v2.15.1

Devilbox version

Devilbox v3.0.0-beta-0.3 10b20c0

Have you removed stopped containers before starting?

Yes

Have you pulled latest Docker images before starting?

Yes

Devilbox start command

docker compose up httpd bind php mysql redis

Config: .env file

###
###  ---------------------------------------------------
###  D E V I L B O X   R U N - T I M E   S E T T I N G S
###  ---------------------------------------------------
###
###  All the following settings are applied during
###  $ docker-compose up
###
###  No need to rebuild any docker images!
###
###  IMPORTANT:
###  ----------
###  When changing any values ensure to stop, rm and restart:
###  $ docker-compose stop
###  $ docker-compose rm -f
###  $ docker-compose up
###
###  NOTE:
###  -----
###  For you own custom variables, scroll to the bottom
###

# The following line will disable any shellcheck warnings throughout this file
# shellcheck disable=SC2034,SC2125


###
### Show all executed commands in each
### docker image during docker-compose up?
###
### 0: Errors
### 1: Errors, Warnings
### 2: Errors, Warnings, Infos  (Recommended)
### 3: Errors, Warnings, Infos, Debug
### 4: Errors, Warnings, Infos, Debug, Trace
DEBUG_ENTRYPOINT=4


###
### Log to file or Docker logs.
###
### Logging to file means log files are available under log/
### on your host operating system.
### Logging to Docker logs means log files are streamed to
### stdout and stderr.
###
### 1: Log to Docker logs
### 0: Log to file
###
DOCKER_LOGS=1


###
### Relative or absolute path to the devilbox repository.
### (Used as a prefix for all mount paths)
### There is no need to change this.
###
### The only exception is for OSX users wanting to use NFS
### mounts instead of Filesystem mounts due to degraded performance
### on OSX.
###
### Note: When changing this variable you must re-create the container.
###       Simply remove it, it will be auto-created during the next start:
###
### $ docker-compose rm -f
###
DEVILBOX_PATH=.


###
### At what IP address should the docker services listen
### on the Host computer?
###
### The specified default should be fine for Linux and OSX (127.0.0.1:).
### If you are on windows, you will probably have to change
### it to the IP address of the docker machine.
###
### a.) Leave blank, to listen on all interfaces (no trailing colon ':')
###    LOCAL_LISTEN_ADDR=
### b.) If an IP is specified, note the trailing colon ':'
###    LOCAL_LISTEN_ADDR=127.0.0.1:
###
LOCAL_LISTEN_ADDR=


###
### This is the domain suffix your projects will be made available
### with mass-virtual-hosting.
### It is also required for the internal DNS server to be setup.
###
### Note: In addition to period or dot character ('.'), only ALPHA ([a-zA-Z]+) characters are supported.
###       Mac users should not use the .local TLD, as this will not resolve properly due Apple's
###       use of Multicast DNS.
###
### Note: If you use 'dvl.to' then there is no need for additional DNS as this always points
###       to 127.0.0.1 by default.
###
### Example:
###   TLD_SUFFIX=loc
### Makes your project available under <project>.loc
###
### Example:
###   TLD_SUFFIX=local
### Makes your project available under <project>.local
###
TLD_SUFFIX=dvl.to


###
### Optional DNS configuration
### Allows you to add extra DNS records (above the wildcard entry)
### Useful if your host computer run other Docker services that you want to connect to or reach
### from within the Devilbox network by a custom hostname.
###
### Format:
### -------
### Resolve any custom defined hostname to an IP address (useable inside container and host os)
###     EXTRA_HOSTS=<hostname>=<ip>[,<hostname>=<ip>]
###
### Resolve any custom defined hostname to whatever IP address a CNAME resolves to
### (Useable inside the container and host OS).
### Note: CNAME must be resolvable by Google DNS
###     EXTRA_HOSTS=<hostname>=<CNAME>[,<hostname>=<CNAME>]
###
### Examples:
### ---------
### EXTRA_HOSTS=hostname.loc=1.2.3.4
### EXTRA_HOSTS=host.loc=1.2.3.4,host.example.org=3.4.5.6
EXTRA_HOSTS=


###
### Set your user id and group id
###
### This should be changed to the value of your local
### users uid and gid
###
### Type `id` on the terminal to find out your values
###
NEW_UID=1000
NEW_GID=1000


###
### Timezone for PHP Docker container (system and php.ini)
###
TIMEZONE=UTC



################################################################################
###
### INTRANET SETTINGS
###
################################################################################

###
### TLD_SUFFIX domains are checked if they are set in the
### host computer /etc/hosts or available via attached DNS server.
### Timeout is done on vhosts.php (intranet) via ajax calls.
### In order to keep performance, set this to a low value.
### DNS checks might not succeed in time on slow machines.
### If DNS is valid, but timeout is expired, set this to a higher value.
###
### DNS_CHECK_TIMEOUT value is how many seconds to time out
### Default is to timeout after 1 second (DNS_CHECK_TIMEOUT=1)
###
DNS_CHECK_TIMEOUT=1


###
### Devilbox UI SSL Certificate generation
###
### When using SSL each certificate requires names for which it is responsible:
### Common Name as well as alternative names.
###
### Specify comma separated hostnames below by which you want to access the Devilbox.
### Those hostnames will be included in the SSL certificate for the Devilbox intranet.
### This has nothing to do for SSL certificates for projects, it is just for the intranet
### itself.
###
DEVILBOX_UI_SSL_CN=localhost,*.localhost,devilbox,*.devilbox,httpd


###
### Devilbox UI Password protection enable/disable (1/0)
###
### Set DEVILBOX_UI_PROTECT to 1 in order to password protect the
### intranet.
###
### Example:
###   DEVILBOX_UI_PROTECT=1
###   DEVILBOX_UI_PROTECT=0
###
DEVILBOX_UI_PROTECT=0


###
### Devilbox UI Password
###
### When DEVILBOX_UI_PROTECT=1, use the following password
### to log in. The password can always be changed.
### When changing the password, make sure to restart your
### PHP container.
###
### Example:
###   DEVILBOX_UI_PASSWORD=my-very-secure-password
###   DEVILBOX_UI_PASSWORD=Some pass with spaces
###
### The default username is 'devilbox'
###
DEVILBOX_UI_PASSWORD=password


###
### Enable the Devilbox Intranet?
###
### Example:
###   DEVILBOX_UI_ENABLE=1
###   DEVILBOX_UI_ENABLE=0
###
DEVILBOX_UI_ENABLE=1


###
### Automatically be logged in into phpMyAdmin
###
### Example:
###   DEVILBOX_VENDOR_PHPMYADMIN_AUTOLOGIN=1
###   DEVILBOX_VENDOR_PHPMYADMIN_AUTOLOGIN=0
###
DEVILBOX_VENDOR_PHPMYADMIN_AUTOLOGIN=1


###
### Automatically be logged in into phpPgAdmin
###
### Example:
###   DEVILBOX_VENDOR_PHPPGADMIN_AUTOLOGIN=1
###   DEVILBOX_VENDOR_PHPPGADMIN_AUTOLOGIN=0
###
DEVILBOX_VENDOR_PHPPGADMIN_AUTOLOGIN=1

###
### HTTPD Supvervisord management
###
DEVILBOX_HTTPD_MGMT_USER=supervisord
DEVILBOX_HTTPD_MGMT_PASS=mypassword



################################################################################
###
### 1. Choose Images (Version)
###
################################################################################

###
### You can choose any combination of httpd, mysql, postgresql or php.
### Each of them are fully compatible between one another.
###


###
### 1.1 Choose PHP Server Image
###
### Note: PHP 5.2 is not officially supported. Intranet won't work (due to lack of namespace support).
###       PHP 5.2 only works with Apache 2.4, Nginx stable and Nginx mainline.
###       Use at your own risk.
###
#PHP_SERVER=5.2
#PHP_SERVER=5.3
#PHP_SERVER=5.4
#PHP_SERVER=5.5
#PHP_SERVER=5.6
#PHP_SERVER=7.0
#PHP_SERVER=7.1
#PHP_SERVER=7.2
#PHP_SERVER=7.3
#PHP_SERVER=7.4
#PHP_SERVER=8.0
PHP_SERVER=8.1
#PHP_SERVER=8.2


###
### 1.2 Choose HTTPD Server Image
###
### Choose between 'debian' or 'alpine' flavour and then select the version
###
### Note: apache-2.2 has no arm64 support on 'alpine' flavour
###
HTTPD_FLAVOUR=alpine

#HTTPD_SERVER=apache-2.2
#HTTPD_SERVER=apache-2.4
HTTPD_SERVER=nginx-stable
#HTTPD_SERVER=nginx-mainline


###
### 1.3 Choose MySQL Server Image
###
#MYSQL_SERVER=mysql-5.5
#MYSQL_SERVER=mysql-5.6
#MYSQL_SERVER=mysql-5.7
#MYSQL_SERVER=mysql-8.0
#MYSQL_SERVER=percona-5.5
#MYSQL_SERVER=percona-5.6
#MYSQL_SERVER=percona-5.7
#MYSQL_SERVER=percona-8.0
#MYSQL_SERVER=mariadb-5.5
#MYSQL_SERVER=mariadb-10.0
#MYSQL_SERVER=mariadb-10.1
#MYSQL_SERVER=mariadb-10.2
#MYSQL_SERVER=mariadb-10.3
#MYSQL_SERVER=mariadb-10.4
#MYSQL_SERVER=mariadb-10.5
MYSQL_SERVER=mariadb-10.6
#MYSQL_SERVER=mariadb-10.7
#MYSQL_SERVER=mariadb-10.8
#MYSQL_SERVER=mariadb-10.9
#MYSQL_SERVER=mariadb-10.10


###
### 1.4 Choose PostgreSQL Server Image
###
### https://www.postgresql.org/support/versioning/
###
### IMPORTANT: Alpine based images might cause issues on Docker Toolbox or OSX
###            https://github.com/docker/toolbox/issues/510
###
#
# PostgreSQL without arm64 support
#
#PGSQL_SERVER=9.0
#PGSQL_SERVER=9.1
#PGSQL_SERVER=9.2-alpine
#
# PostgreSQL with arm64 support
#
#PGSQL_SERVER=9.2
#PGSQL_SERVER=9.3
#PGSQL_SERVER=9.3-alpine
#PGSQL_SERVER=9.4
#PGSQL_SERVER=9.4-alpine
#PGSQL_SERVER=9.5
#PGSQL_SERVER=9.5-alpine
#PGSQL_SERVER=9.6
#PGSQL_SERVER=9.6-alpine
#PGSQL_SERVER=10
#PGSQL_SERVER=10-alpine
#PGSQL_SERVER=11
#PGSQL_SERVER=11-alpine
#PGSQL_SERVER=12
#PGSQL_SERVER=12-alpine
#PGSQL_SERVER=13
#PGSQL_SERVER=13-alpine
#PGSQL_SERVER=14
PGSQL_SERVER=14-alpine
#PGSQL_SERVER=15
#PGSQL_SERVER=15-alpine
#PGSQL_SERVER=latest
#PGSQL_SERVER=alpine


###
### 1.5 Choose Redis Server Image
###
### IMPORTANT: Alpine based images might cause issues on Docker Toolbox or OSX
###            https://github.com/docker/toolbox/issues/510
###
#
# Redis without arm64 support
#
#REDIS_SERVER=2.8
#REDIS_SERVER=3.0
#REDIS_SERVER=3.0-alpine
#
# Redis with arm64 support
#
#REDIS_SERVER=3.2
#REDIS_SERVER=3.2-alpine
#REDIS_SERVER=4.0
#REDIS_SERVER=4.0-alpine
#REDIS_SERVER=5.0
#REDIS_SERVER=5.0-alpine
#REDIS_SERVER=6.0
#REDIS_SERVER=6.0-alpine
#REDIS_SERVER=6.2
#REDIS_SERVER=6.2-alpine
#REDIS_SERVER=7.0
REDIS_SERVER=7.0-alpine
#REDIS_SERVER=latest
#REDIS_SERVER=alpine


###
### 1.6 Choose Memcached Server Image
###
### IMPORTANT: Alpine based images might cause issues on Docker Toolbox or OSX
###            https://github.com/docker/toolbox/issues/510
###
#
# Memcached without arm64 support
#
#MEMCD_SERVER=1.4
#MEMCD_SERVER=1.4-alpine
#
# Memcached with arm64 support
#
#MEMCD_SERVER=1.5
#MEMCD_SERVER=1.5-alpine
#MEMCD_SERVER=1.6
MEMCD_SERVER=1.6-alpine
#MEMCD_SERVER=latest
#MEMCD_SERVER=alpine


###
### 1.7 Choose Mongo Server Image
###
### https://www.mongodb.com/evolved
###
#
# MongoDB without arm64 support
#
#MONGO_SERVER=2.8
#MONGO_SERVER=3.0
#MONGO_SERVER=3.2
#
# MongoDB with arm64 support
#
#MONGO_SERVER=3.4
#MONGO_SERVER=3.6
#MONGO_SERVER=4.0
#MONGO_SERVER=4.2
#MONGO_SERVER=4.4
MONGO_SERVER=5.0
#MONGO_SERVER=latest



################################################################################
###
### 2. Host Mounts (Your computer)
###
################################################################################

###
### Global mount options
###
### Note: When adding custom mount options, ensure to start with a
###       leading ',' (comma), as those options are prepended to already
###       existing mount options.
###
### Note: If no mount options are specified, leave this variable empty
###       and do not add a leading ',' (comma).
###
### MOUNT_OPTIONS=,cached
### MOUNT_OPTIONS=
###
### Example: Allow to share mounts accross container with SELINUX enabled
###
### MOUNT_OPTIONS=,z
###
MOUNT_OPTIONS=


###
### Local filesystem path to www projects.
###
### Note: When changing this variable you must re-create the container.
###       Simply remove it, it will be auto-created during the next start:
###
### $ docker-compose rm -f
###
HOST_PATH_HTTPD_DATADIR=./data/www


###
### Local filesystem path to where your backups are stored
###
### Note: When changing this variable you must re-create the container.
###       Simply remove it, it will be auto-created during the next start:
###
### $ docker-compose rm -f
###
HOST_PATH_BACKUPDIR=./backups


###
### The path on your host OS of the ssh directory to be mounted into the
### PHP container into /home/devilbox/.ssh.
###
### IMPORTANT: The path is mounted read-only to ensure you cannot accidentally
##             delete anything inside the php container.
###
HOST_PATH_SSH_DIR=~/.ssh



################################################################################
###
### 3. PHP Docker Settings
###
################################################################################

###
### Enable certain PHP modules which are not enabled by default
###
### Currently the only modules that can be enabled are 'ioncube' and 'blackfire'
### Also ensure to disable xdebug when using any of the above:
### https://xdebug.org/docs/install#compat
###
### PHP_MODULES_ENABLE=ioncube, blackfire
###
PHP_MODULES_ENABLE=


###
### Disable any PHP modules that you don't require
###
### Specify a comma separated list without spaces of modules to disable
###
### PHP_MODULES_DISABLE=xdebug,imagick,swoole
###
PHP_MODULES_DISABLE=oci8,PDO_OCI,pdo_sqlsrv,sqlsrv,rdkafka,swoole,psr,phalcon


###
### Postfix settings for email catch-all
###
### When set to '1' postfix is normally started and made available. However you still need
### to configure it to your needs yourself. For that you can use the autostart scripts
### and define a couple of 'postconf -e name=value' commands.
###
### When set to '2' (email catch-all), no mail will leave the Devilbox. It is automatically
### internally routed the the devilbox mail account and you can see each sent mail
### in the bundled intranet: https://localhost/mail.php
###
### Values:
### 0: Disable postfix (do not start it)
### 1: Enable/Start postfix
### 2: Enable/Start postfix and enable email catch-all
###
PHP_MAIL_CATCH_ALL=2


###
### Configure everything else about PHP in
### * cfg/php-ini-X.X/*.ini
### * cfg/php-fpm-X.X/*.conf



################################################################################
###
### 4. HTTPD Docker Settings
###
################################################################################

###
### Expose HTTPD Port to Host
###
HOST_PORT_HTTPD=80
HOST_PORT_HTTPD_SSL=443


###
### Globally enable/disable HTTP/2 support
###
### This cannot be done on a per vhost level and must be enabled/disabled globally.
###
### Values:
###  * 0: HTTP/2 is disabled
###  * 1: HTTP/2 is enabled
###
HTTPD_HTTP2_ENABLE=1


###
### SSL (HTTP/HTTPS) settings for automated vhost generation
###
### By default each project will have two vhosts (one for HTTP and one for HTTPS).
### You can control the SSL settings for your projects via the below stated values.
###
### This is internally achieved via the '-m' argument of https://github.com/devilbox/vhost-gen
###
### Values:
###   * both:  Serve HTTP and HTTPS for all projects
###   * redir: HTTP always redirects to HTTPS
###   * ssl:   Only serve HTTPS
###   * plain: Only serve HTTP
###
HTTPD_VHOST_SSL_TYPE=both


###
### Document Root Subdirectory
###
### In your project directory, which subfolder should
### serve your files?
###
### When changing this value, restart the devilbox.
###
HTTPD_DOCROOT_DIR=htdocs


###
### Per vHost Config Subdirectory
###
### In your project directory, which subfolder should
### hold apache, nginx templates for a customized vhost?
###
### When changing this value, restart the devilbox.
###
HTTPD_TEMPLATE_DIR=.devilbox


###
### Remote (Upstream) Backend Timeout
###
### This setting specifies the Timeout for a remote Backend server,
### such as PHP-FPM or a Reverse Proxy.
###
### As for PHP, keep in mind that this value should be greater than
### PHP's max_execution_time,otherwise the php script could still
### run and the webserver will simply drop the connection before getting an answer by PHP.
###
HTTPD_BACKEND_TIMEOUT=1800


###
### NGINX ONLY
###
### Set worker_processes and worker_connections
###
### https://nginx.org/en/docs/ngx_core_module.html#worker_processes
### https://nginx.org/en/docs/ngx_core_module.html#worker_connections
###
HTTPD_NGINX_WORKER_PROCESSES=auto
HTTPD_NGINX_WORKER_CONNECTIONS=1024



################################################################################
###
### 5. MySQL Docker Settings
###
################################################################################

###
### MySQL root user password
###
### The password is required for the initial creation of the MySQL database
### as well as the Devilbox intranet to display schema and configuration settings.
###
### If you change your MySQL root user password via mysql cli, phpMyAdmin or other tools
### after the database has been created, ensure to adjust the value here accordingly as well.
###
### If you only change this value here after the database has been created,
### the MySQL root user password will not actually be changed and the Devilbox intranet
### won't be able to connect to the MySQL service.
###
MYSQL_ROOT_PASSWORD=


###
### Expose MySQL Port to Host
###
HOST_PORT_MYSQL=3306



################################################################################
###
### 6. PostgreSQL Docker Settings
###
################################################################################

###
### PostgreSQL 'root' user name (usually postgres)
###
PGSQL_ROOT_USER=postgres


###
### PostgreSQL 'root' user password
###
### If you want to set a password, ensure to remove 'trust' from
### PGSQL_HOST_AUTH_METHOD below
###
PGSQL_ROOT_PASSWORD=


###
### In order to not use a password for PostgreSQL, keep this value at 'trust'
###
PGSQL_HOST_AUTH_METHOD=trust


###
### Expose PostgreSQL Port to Host
###
HOST_PORT_PGSQL=5432



################################################################################
###
### 7. Redis Docker Settings
###
################################################################################

###
### Expose Redis Port to Host
###
HOST_PORT_REDIS=6379


###
### Custom startup arguments
###
### Apply custom startup arguments to redis
###
### Example: Password protection
###   Add password protection to the Redis server by specifying it should
###   require a password.
###   Note: Do not add quotes or spaces to the password
###
###   REDIS_ARGS=--requirepass my-redis-root-password
###
### Example: Verbosity
###
###   REDIS_ARGS=--loglevel verbose
###
REDIS_ARGS=
#REDIS_ARGS=--loglevel verbose --requirepass my-redis-root-password



################################################################################
###
### 8. Memcached Docker Settings
###
################################################################################

###
### Expose Memcached Port to Host
###
HOST_PORT_MEMCD=11211



################################################################################
###
### 9. MongoDB Docker Settings
###
################################################################################

###
### Expose MongoDB Port to Host
###
HOST_PORT_MONGO=27017



################################################################################
###
### 10. Bind Docker Settings
###
################################################################################

###
### Expose Bind Port to Host
###
HOST_PORT_BIND=1053


###
### Add comma separated DNS server from which you want to receive DNS
### You can also add DNS servers from your LAN (if any are available)
###
BIND_DNS_RESOLVER=8.8.8.8,8.8.4.4


###
### Validate DNSSEC
###
### Values:
###  no:    DNSSEC validation is disabled
###  yes:   DNSSEC validation is enabled, but a trust anchor must be manually configured.
###  auto:  DNSSEC validation is enabled, and a default trust anchor for root zone is used.
###
BIND_DNSSEC_VALIDATE=no


###
### Bind timing options (time in seconds)
###
### Leave empty for defaults.
### Only change when you know what you are doing.
###
BIND_TTL_TIME=
BIND_REFRESH_TIME=
BIND_RETRY_TIME=
BIND_EXPIRY_TIME=
BIND_MAX_CACHE_TIME=


###
### Show DNS Queries in Docker logs output?
###
### 1: Yes
### 0: No
BIND_LOG_DNS_QUERIES=0



################################################################################
###
### 11. Custom variables
###
################################################################################

###
### Any variable defined in this file will be available
### as environment variables to your PHP/HHV Docker container.
###
### This might be useful to set application environment and retrieve
### them via: <?php getenv('MY_APPLICATION_ENV'); ?>
###


###
### Example:
### <?php echo getenv('Foo'); ?> would produce: 'some value'
###
#Foo=some value


#ElasticSearch
#Controls the host port on which Elastic Search will be available at.
HOST_PORT_ELK_ELASTIC=9200
#Controls the host port on which Kibana will be available at.
HOST_PORT_ELK_KIBANA=5601
#Controls the ELK stack version to use.
ELK_SERVER=8.6.0

Config: docker-compose.override.yml

No response

Config: ./check-config.sh

# ==============================================================================
# Checking git
# ==============================================================================
[SUCC]  git is clean

# ==============================================================================
# Checking .env file
# ==============================================================================
[SUCC]  .env file exists
[SUCC]  .env file is readable
[SUCC]  All variables are present in .env file
[SUCC]  No variables is duplicated in .env file

# ==============================================================================
# Checking .env file values
# ==============================================================================
[ERR]   Variable 'DEBUG_ENTRYPOINT' should be 0, 1 or 2. Has: 4

# ==============================================================================
# Checking required Devilbox core directories exist
# ==============================================================================
[SUCC]  All PHP cfg/ sub directories are present
[SUCC]  All PHP log/ sub directories are present
[SUCC]  All HTTPD cfg/ sub directories are present
[SUCC]  All HTTPD log/ sub directories are present

# ==============================================================================
# Checking devilbox core directory permissions
# ==============================================================================
[SUCC]  All devilbox directories have correct permissions
[SUCC]  All devilbox directories have correct uid
[SUCC]  All devilbox directories have correct gid

# ==============================================================================
# Checking devilbox core file permissions
# ==============================================================================
[SUCC]  All devilbox files have correct permissions
[SUCC]  All devilbox files have correct uid
[SUCC]  All devilbox files have correct gid

# ==============================================================================
# Checking projects permissions
# ==============================================================================
[SUCC]  All project dirs have correct permissions
[SUCC]  All project dirs have correct uid
[SUCC]  All project dirs have correct gid

# ==============================================================================
# Checking projects settings
# ==============================================================================
[SUCC]  All projects have valid DNS records
[SUCC]  All projects have valid HTTPD_DOCROOT_DIR

# ==============================================================================
# Checking customizations
# ==============================================================================
[NOTE]  [docker]     Custom docker-compose.override.yml present
[NOTE]  [php.ini]    Custom config present in cfg/php-ini-8.1/
[NOTE]  [php-fpm]    Custom config present in cfg/php-fpm-8.1/

# ==============================================================================
# SUMMARY
# ==============================================================================
[ERR]   Found 1 error(s)
[ERR]   Devilbox might not work properly
[ERR]   Fix the issues before submitting a bug report
[NOTE]  3 custom configurations applied. If you encounter issues, reset them first.
[INFO]  Ensure to run 'docker-compose stop; docker-compose rm -f' on .env changes or custom configs

Log: docker-compose logs

⠿ Container devilbox-bind-1   Recreated                                                                                                             0.0s
 ⠿ Container devilbox-php-1    Recreated                                                                                                             0.1s
 ⠿ Container devilbox-httpd-1  Recreated                                                                                                             0.0s
 ⠿ Container devilbox-redis-1  Recreated                                                                                                             0.0s
 ⠿ Container devilbox-mysql-1  Recreated                                                                                                             0.0s
Attaching to devilbox-bind-1, devilbox-httpd-1, devilbox-mysql-1, devilbox-php-1, devilbox-redis-1
devilbox-bind-1   | [WARN] Wrong value for DEBUG_ENTRYPOINT: '4'. Setting to 1
devilbox-bind-1   | [INFO] Debug level: 1
devilbox-bind-1   | 
devilbox-bind-1   | --------------------------------------------------------------------------------
devilbox-bind-1   | /etc/bind/named.conf
devilbox-bind-1   | --------------------------------------------------------------------------------
devilbox-bind-1   | include "/etc/bind/named.conf.logging";
devilbox-bind-1   | include "/etc/bind/named.conf.options";
devilbox-bind-1   | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
devilbox-bind-1   | [INFO] BIND logging: disabled explicitly
devilbox-bind-1   | [INFO] Using default DNS TTL time: 3600 sec
devilbox-bind-1   | [INFO] Using default DNS Refresh time: 1200 sec
devilbox-bind-1   | [INFO] Using default DNS Retry time: 180 sec
devilbox-bind-1   | [INFO] Using default DNS Expiry time: 1209600 sec
devilbox-bind-1   | [INFO] Using default DNS Max Cache time: 10800 sec
devilbox-bind-1   | [INFO] Changing DNS Max Cache size to: 90%
devilbox-bind-1   | [INFO] Not adding any PTR records
devilbox-bind-1   | [INFO] Adding A Record: *.dvl.to -> 127.0.0.1
devilbox-bind-1   | [INFO] Not adding any CNAME records
devilbox-bind-1   | [INFO] $ALLOW_QUERY not set.
devilbox-bind-1   | [INFO] DNS query rules will not be set
devilbox-bind-1   | [INFO] $ALLOW_RECURSION not set.
devilbox-bind-1   | [INFO] DNS recursion rules will not be set
devilbox-bind-1   | [INFO] DNSSEC Validation: no
devilbox-bind-1   | [INFO] Adding custom DNS forwarder: 8.8.8.8,8.8.4.4
devilbox-bind-1   | 
devilbox-bind-1   | --------------------------------------------------------------------------------
devilbox-bind-1   | /etc/bind/named.conf.options
devilbox-bind-1   | --------------------------------------------------------------------------------
devilbox-bind-1   | options {
devilbox-bind-1   |     directory "/var/cache/bind";
devilbox-bind-1   |     dnssec-validation no;
devilbox-bind-1   |     auth-nxdomain no;    # conform to RFC1035
devilbox-bind-1   |     listen-on-v6 { any; };
devilbox-bind-1   |     max-cache-size 90%;
devilbox-bind-1   |     response-policy { zone "rpz"; };
devilbox-bind-1   |     forwarders {
devilbox-bind-1   |         8.8.8.8;
devilbox-bind-1   |         8.8.4.4;
devilbox-bind-1   |     };
devilbox-bind-1   | };
devilbox-bind-1   | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
devilbox-bind-1   | 
devilbox-bind-1   | --------------------------------------------------------------------------------
devilbox-bind-1   | /etc/bind/custom/conf/rpz.conf
devilbox-bind-1   | --------------------------------------------------------------------------------
devilbox-bind-1   | zone "rpz" IN {
devilbox-bind-1   |     type master;
devilbox-bind-1   |     allow-transfer { any; };
devilbox-bind-1   |     allow-update { any; };
devilbox-bind-1   |     file "/etc/bind/custom/zone/rpz";
devilbox-bind-1   | };
devilbox-bind-1   | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
devilbox-bind-1   | 
devilbox-bind-1   | --------------------------------------------------------------------------------
devilbox-bind-1   | /etc/bind/custom/zone/rpz
devilbox-bind-1   | --------------------------------------------------------------------------------
devilbox-bind-1   | $TTL 3600
devilbox-bind-1   | @                               IN   SOA     bind. admin.bind. (
devilbox-bind-1   |                                              1674872945     ; Serial number
devilbox-bind-1   |                                              1200           ; Refresh time
devilbox-bind-1   |                                              180            ; Retry time
devilbox-bind-1   |                                              1209600        ; Expiry time
devilbox-bind-1   |                                              10800          ; Negative Cache TTL
devilbox-bind-1   | )
devilbox-bind-1   | 
devilbox-bind-1   | ; NS Records
devilbox-bind-1   |                                 IN   NS      bind.
devilbox-bind-1   | 
devilbox-bind-1   | ; Custom Records
devilbox-bind-1   | *.dvl.to                        IN   A       127.0.0.1
devilbox-bind-1   | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
devilbox-bind-1   | [INFO] Starting BIND 9.18.11
devilbox-php-1    | [INFO] Debug level: 4
devilbox-php-1    | [INFO] Changing user 'devilbox' uid to: 1000
devilbox-php-1    | root $ usermod -u 1000 devilbox 2>/dev/null
devilbox-php-1    | usermod: no changes
devilbox-php-1    | root $ chown -R devilbox /home/devilbox 2>/dev/null || true
devilbox-php-1    | root $ chown -R devilbox /var/lib/php/session
devilbox-php-1    | root $ chown -R devilbox /var/lib/php/wsdlcache
devilbox-php-1    | root $ chown -R devilbox /var/spool/mail/devilbox
devilbox-php-1    | root $ chown -R devilbox /etc/supervisor/custom.d
devilbox-php-1    | [INFO] Changing group 'devilbox' gid to: 1000
devilbox-php-1    | root $ groupmod -g 1000 devilbox 2>/dev/null
devilbox-php-1    | root $ chown -R :devilbox /home/devilbox 2>/dev/null || true
devilbox-php-1    | root $ chown -R :devilbox /var/lib/php/session
devilbox-php-1    | root $ chown -R :devilbox /var/lib/php/wsdlcache
devilbox-php-1    | root $ chown -R :devilbox /var/spool/mail/devilbox
devilbox-php-1    | root $ chown -R :devilbox /etc/supervisor/custom.d
devilbox-php-1    | [INFO] Setting container timezone to: UTC
devilbox-php-1    | root $ ln -sf /usr/share/zoneinfo/UTC /etc/localtime
devilbox-php-1    | [INFO] Setting PHP: timezone=UTC
devilbox-php-1    | root $ echo 'date.timezone = UTC' > /usr/local/etc/php/conf.d/devilbox-runtime-timezone.ini
devilbox-php-1    | [INFO] Docker date set to: Sat Jan 28 02:29:05 UTC 2023
devilbox-php-1    | [INFO] $DOCKER_LOGS set to 1. Logging to docker logs (stdout and stderr).
devilbox-php-1    | [INFO] $ENABLE_MAIL set to 2. Enabling postfix catch-all
devilbox-php-1    | root $ chmod 0644 /var/mail/devilbox
devilbox-php-1    | root $ chown devilbox:devilbox /var/mail
devilbox-php-1    | root $ chown devilbox:devilbox /var/mail/devilbox
devilbox-php-1    | root $ postconf -e 'strict_mailbox_ownership=no'
devilbox-php-1    | root $ postconf -e 'inet_protocols=ipv4'
devilbox-php-1    | root $ postconf -e 'myhostname=localhost'
devilbox-php-1    | root $ postconf -e 'virtual_alias_maps=pcre:/etc/postfix/virtual'
devilbox-php-1    | root $ echo '/.*@.*/ devilbox' >> /etc/postfix/virtual
devilbox-php-1    | root $ newaliases
devilbox-httpd-1  | [INFO] Entrypoint debug: 4
devilbox-httpd-1  | [INFO] Runtime debug: 1
devilbox-httpd-1  | [INFO] -------------------------------------------------------------------------
devilbox-httpd-1  | [INFO] Environment Variables (set/default)
devilbox-httpd-1  | [INFO] -------------------------------------------------------------------------
devilbox-httpd-1  | [INFO] Variables: General:
devilbox-httpd-1  | [INFO]     Set     $NEW_UID                    Value:   1000
devilbox-httpd-1  | [INFO]     Set     $NEW_GID                    Value:   1000
devilbox-httpd-1  | [INFO]     Set     $TIMEZONE                   Value:   UTC
devilbox-httpd-1  | [INFO] Variables: Main Vhost:
devilbox-httpd-1  | [INFO]     Set     $MAIN_VHOST_ENABLE          Value:   1
devilbox-httpd-1  | [INFO]     Unset   $MAIN_VHOST_DOCROOT_DIR     Default: htdocs
devilbox-httpd-1  | [INFO]     Unset   $MAIN_VHOST_TEMPLATE_DIR    Default: cfg
devilbox-httpd-1  | [INFO]     Set     $MAIN_VHOST_ALIASES_ALLOW   Value:   /devilbox-api/:/var/www/default/api, /vhost.d/:/etc/httpd
devilbox-httpd-1  | [INFO]     Unset   $MAIN_VHOST_ALIASES_DENY    Default: /\.git, /\.ht.*
devilbox-httpd-1  | [INFO]     Set     $MAIN_VHOST_BACKEND         Value:   conf:phpfpm:tcp:172.16.238.10:9000
devilbox-httpd-1  | [INFO]     Set     $MAIN_VHOST_BACKEND_TIMEOUT Value:   1800
devilbox-httpd-1  | [INFO]     Set     $MAIN_VHOST_SSL_TYPE        Value:   both
devilbox-httpd-1  | [INFO]     Set     $MAIN_VHOST_SSL_CN          Value:   localhost,*.localhost,devilbox,*.devilbox,httpd
devilbox-httpd-1  | [INFO]     Set     $MAIN_VHOST_STATUS_ENABLE   Value:   1
devilbox-httpd-1  | [INFO]     Set     $MAIN_VHOST_STATUS_ALIAS    Value:   /devilbox-httpd-status
devilbox-httpd-1  | [INFO] Variables: Mass Vhost:
devilbox-httpd-1  | [INFO]     Set     $MASS_VHOST_ENABLE          Value:   1
devilbox-httpd-1  | [INFO]     Set     $MASS_VHOST_DOCROOT_DIR     Value:   htdocs
devilbox-httpd-1  | [INFO]     Set     $MASS_VHOST_TEMPLATE_DIR    Value:   .devilbox
devilbox-httpd-1  | [INFO]     Set     $MASS_VHOST_ALIASES_ALLOW   Value:   /devilbox-api/:/var/www/default/api:http(s)?://(.*)$
devilbox-httpd-1  | [INFO]     Unset   $MASS_VHOST_ALIASES_DENY    Default: /\.git, /\.ht.*
devilbox-httpd-1  | [INFO]     Set     $MASS_VHOST_BACKEND         Value:   conf:phpfpm:tcp:172.16.238.10:9000
devilbox-httpd-1  | [INFO]     Set     $MASS_VHOST_BACKEND_REWRITE Value:   file:backend.cfg
devilbox-httpd-1  | [INFO]     Set     $MASS_VHOST_BACKEND_TIMEOUT Value:   1800
devilbox-httpd-1  | [INFO]     Set     $MASS_VHOST_SSL_TYPE        Value:   both
devilbox-httpd-1  | [INFO]     Set     $MASS_VHOST_TLD_SUFFIX      Value:   .dvl.to
devilbox-httpd-1  | [INFO] Variables: Misc:
devilbox-httpd-1  | [INFO]     Set     $WORKER_CONNECTIONS         Value:   1024
devilbox-httpd-1  | [INFO]     Set     $WORKER_PROCESSES           Value:   auto
devilbox-httpd-1  | [INFO]     Set     $HTTP2_ENABLE               Value:   1
devilbox-httpd-1  | [INFO]     Set     $DOCKER_LOGS                Value:   1
devilbox-httpd-1  | [INFO] -------------------------------------------------------------------------
devilbox-httpd-1  | [INFO] Validate Settings
devilbox-httpd-1  | [INFO] -------------------------------------------------------------------------
devilbox-httpd-1  | [INFO] Settings: General:
devilbox-httpd-1  | [OK]       Valid   $NEW_UID                    User ID (uid)       1000
devilbox-httpd-1  | [OK]       Valid   $NEW_GID                    Group ID (gid)      1000
devilbox-httpd-1  | [OK]       Valid   $TIMEZONE                   ignored             (not specified)
devilbox-httpd-1  | [INFO] Settings: Main Vhost:
devilbox-httpd-1  | [OK]       Valid   $MAIN_VHOST_ENABLE          Default vhost       Enabled
devilbox-httpd-1  | [OK]       Valid   $MAIN_VHOST_DOCROOT_DIR     Document root:      /var/www/default/htdocs
devilbox-httpd-1  | [OK]       Valid   $MAIN_VHOST_TEMPLATE_DIR    Template dir        /var/www/default/cfg
devilbox-httpd-1  | [OK]       Valid   $MAIN_VHOST_ALIASES_ALLOW   Defined Aliases     /devilbox-api/, /vhost.d/
devilbox-httpd-1  | [OK]       Valid   $MAIN_VHOST_ALIASES_DENY    Defined Aliases     /\.git, /\.ht.*
devilbox-httpd-1  | [OK]       Valid   $MAIN_VHOST_BACKEND         PHP via PHP-FPM     Remote: tcp://172.16.238.10:9000
devilbox-httpd-1  | [OK]       Valid   $MAIN_VHOST_BACKEND_TIMEOUT Timeout:            1800sec
devilbox-httpd-1  | [OK]       Valid   $MAIN_VHOST_SSL_TYPE        Vhost protocol      HTTP and HTTPS
devilbox-httpd-1  | [OK]       Valid   $MAIN_VHOST_SSL_CN          SSL cert subject    CN = localhost,*.localhost,devilbox,*.devilbox,httpd
devilbox-httpd-1  | [OK]       Valid   $MAIN_VHOST_STATUS_ENABLE   Status page         Enabled
devilbox-httpd-1  | [OK]       Valid   $MAIN_VHOST_STATUS_ALIAS    Status page URL     /devilbox-httpd-status
devilbox-httpd-1  | [INFO] Settings: Mass Vhost:
devilbox-httpd-1  | [OK]       Valid   $MASS_VHOST_ENABLE          Mass vhost          Enabled
devilbox-httpd-1  | [OK]       Valid   $MASS_VHOST_DOCROOT_DIR     Document root:      /shared/httpd/<project>/htdocs
devilbox-httpd-1  | [OK]       Valid   $MASS_VHOST_TEMPLATE_DIR    Template dir        /shared/httpd/<project>/.devilbox
devilbox-httpd-1  | [OK]       Valid   $MASS_VHOST_ALIASES_ALLOW   Defined Aliases     /devilbox-api/
devilbox-httpd-1  | [OK]       Valid   $MASS_VHOST_ALIASES_DENY    Defined Aliases     /\.git, /\.ht.*
devilbox-httpd-1  | [OK]       Valid   $MASS_VHOST_BACKEND         PHP via PHP-FPM     Remote: tcp://172.16.238.10:9000
devilbox-httpd-1  | [OK]       Valid   $MASS_VHOST_BACKEND_REWRITE Backend overwrite   /shared/httpd/<project>/.devilbox/backend.cfg
devilbox-httpd-1  | [OK]       Valid   $MASS_VHOST_BACKEND_TIMEOUT Timeout:            1800sec
devilbox-httpd-1  | [OK]       Valid   $MASS_VHOST_SSL_TYPE        Vhost protocol      HTTP and HTTPS
devilbox-httpd-1  | [OK]       Valid   $MASS_VHOST_TLD_SUFFIX      Vhost domain        <project>.dvl.to
devilbox-httpd-1  | [INFO] Settings: Misc:
devilbox-httpd-1  | [OK]       Valid   $WORKER_CONNECTIONS         worker_connections  1024
devilbox-httpd-1  | [OK]       Valid   $WORKER_PROCESSES           worker_processes    auto
devilbox-httpd-1  | [OK]       Valid   $HTTP2_ENABLE               HTTP/2              Enabled
devilbox-httpd-1  | [OK]       Valid   $DOCKER_LOGS                Log to              stdout and stderr
devilbox-httpd-1  | [INFO] -------------------------------------------------------------------------
devilbox-httpd-1  | [INFO] Apply Settings
devilbox-httpd-1  | [INFO] -------------------------------------------------------------------------
devilbox-httpd-1  | [INFO] Setting uid to 1000 (user: nginx)
devilbox-httpd-1  | [CMD]  usermod -u 1000 nginx
devilbox-httpd-1  | [CMD]  id nginx
devilbox-httpd-1  | uid=1000(nginx) gid=101(nginx) groups=101(nginx),101(nginx)
devilbox-httpd-1  | [INFO] Setting gid to 1000 (group: nginx)
devilbox-httpd-1  | [CMD]  groupmod -g 1000 nginx
devilbox-httpd-1  | [CMD]  id nginx
devilbox-httpd-1  | uid=1000(nginx) gid=1000(nginx) groups=1000(nginx),1000(nginx)
devilbox-httpd-1  | [INFO] Skipping timezone. Already set to UTC: Sat Jan 28 02:29:06 UTC 2023
devilbox-httpd-1  | [INFO] vhost-gen: no custom global template found in: /etc/vhost-gen.d/nginx.yml
devilbox-httpd-1  | [CMD]  vhost-gen -v -d -n "localhost" -p "/var/www/default/htdocs" -c "/etc/vhost-gen/main.yml" -o "/var/www/default/cfg" -s -m "both" -t "/etc/vhost-gen/templates-main/"
devilbox-httpd-1  | vhost-gen: [INFO] Loading configuration file        (-c): /etc/vhost-gen/main.yml
devilbox-httpd-1  | vhost-gen: [INFO] Loading vhost template (global)   (-t): /etc/vhost-gen/templates-main/nginx.yml
devilbox-httpd-1  | vhost-gen: [INFO] Loading vhost template (override) (-o): /var/www/default/cfg/nginx.yml
devilbox-httpd-1  | vhost-gen: [INFO] Override Vhost template not found: /var/www/default/cfg/nginx.yml
devilbox-httpd-1  | vhost-gen: [INFO] Creating vhost type: https and http (both)
devilbox-httpd-1  | vhost-gen: [INFO] Using vhost name: localhost
devilbox-httpd-1  | vhost-gen: [INFO] Log setting: stdout -> /dev/stdout
devilbox-httpd-1  | vhost-gen: [INFO] Log setting: stderr -> /dev/stderr
devilbox-httpd-1  | vhost-gen: [INFO] Log setting: dir -> True
devilbox-httpd-1  | vhost-gen: [INFO] Log setting: Not specified
devilbox-httpd-1  | vhost-gen: [INFO] Vhost config written to: /etc/httpd/conf.d/localhost.conf
devilbox-httpd-1  | [TRC]  server {
devilbox-httpd-1  |     listen       443 ssl http2 default_server;
devilbox-httpd-1  |     server_name  _;
devilbox-httpd-1  |     access_log   "/tmp/www-access.log" combined;
devilbox-httpd-1  |     error_log    "/tmp/www-error.log" warn;
devilbox-httpd-1  |     ssl_certificate           /etc/httpd/cert/main/localhost.crt;
devilbox-httpd-1  |     ssl_certificate_key       /etc/httpd/cert/main/localhost.key;
devilbox-httpd-1  |     ssl_protocols             TLSv1 TLSv1.1 TLSv1.2;
devilbox-httpd-1  |     ssl_prefer_server_ciphers on;
devilbox-httpd-1  |     ssl_ciphers               HIGH:!aNULL:!MD5;
devilbox-httpd-1  |     # Define the vhost to serve files
devilbox-httpd-1  |     root         "/var/www/default/htdocs/";
devilbox-httpd-1  |     index        index.php index.html index.htm;
devilbox-httpd-1  |     # PHP-FPM Definition
devilbox-httpd-1  |     location / {
devilbox-httpd-1  |         try_files $uri $uri/ /index.php$is_args$args;
devilbox-httpd-1  |     }
devilbox-httpd-1  |     # CHANGED:
devilbox-httpd-1  |     #location ~ \.php?$ {
devilbox-httpd-1  |     location ~ \.php($|/) {
devilbox-httpd-1  |         set $script $uri;
devilbox-httpd-1  |         if ($uri ~ "^(.+\.php)(/.+)") {
devilbox-httpd-1  |             set $script $1;
devilbox-httpd-1  |         }
devilbox-httpd-1  |     # end of CHANGED:
devilbox-httpd-1  |         try_files $uri = 404;
devilbox-httpd-1  |         include fastcgi_params;
devilbox-httpd-1  |         # https://stackoverflow.com/questions/1733306/nginx-errors-readv-and-recv-failed/51457613#51457613
devilbox-httpd-1  |         fastcgi_keep_conn off;
devilbox-httpd-1  |         fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
devilbox-httpd-1  |         fastcgi_split_path_info ^(.+\.php)(.*)$;
devilbox-httpd-1  |         fastcgi_pass 172.16.238.10:9000;
devilbox-httpd-1  |         fastcgi_read_timeout 1800;
devilbox-httpd-1  |         fastcgi_index index.php;
devilbox-httpd-1  |         fastcgi_intercept_errors on;
devilbox-httpd-1  |     }
devilbox-httpd-1  |     # Alias Definition
devilbox-httpd-1  |     location ~ /devilbox-api/ {
devilbox-httpd-1  |         root  /var/www/default/api;
devilbox-httpd-1  |     }
devilbox-httpd-1  |     # Alias Definition
devilbox-httpd-1  |     location ~ /vhost.d/ {
devilbox-httpd-1  |         root  /etc/httpd;
devilbox-httpd-1  |     }
devilbox-httpd-1  |     # Deny Definition
devilbox-httpd-1  |     location ~ /\.git {
devilbox-httpd-1  |         deny all;
devilbox-httpd-1  |     }
devilbox-httpd-1  |     # Deny Definition
devilbox-httpd-1  |     location ~ /\.ht.* {
devilbox-httpd-1  |         deny all;
devilbox-httpd-1  |     }
devilbox-httpd-1  |     # Status Page
devilbox-httpd-1  |     location ~ /devilbox-httpd-status {
devilbox-httpd-1  |         stub_status on;
devilbox-httpd-1  |         access_log off;
devilbox-httpd-1  |     }
devilbox-httpd-1  |     # Custom directives
devilbox-httpd-1  | }
devilbox-httpd-1  | server {
devilbox-httpd-1  |     listen       80 default_server;
devilbox-httpd-1  |     server_name  _;
devilbox-httpd-1  |     access_log   "/tmp/www-access.log" combined;
devilbox-httpd-1  |     error_log    "/tmp/www-error.log" warn;
devilbox-httpd-1  |     # Define the vhost to serve files
devilbox-httpd-1  |     root         "/var/www/default/htdocs/";
devilbox-httpd-1  |     index        index.php index.html index.htm;
devilbox-httpd-1  |     # PHP-FPM Definition
devilbox-httpd-1  |     location / {
devilbox-httpd-1  |         try_files $uri $uri/ /index.php$is_args$args;
devilbox-httpd-1  |     }
devilbox-httpd-1  |     # CHANGED:
devilbox-httpd-1  |     #location ~ \.php?$ {
devilbox-httpd-1  |     location ~ \.php($|/) {
devilbox-httpd-1  |         set $script $uri;
devilbox-httpd-1  |         if ($uri ~ "^(.+\.php)(/.+)") {
devilbox-httpd-1  |             set $script $1;
devilbox-httpd-1  |         }
devilbox-httpd-1  |     # end of CHANGED:
devilbox-httpd-1  |         try_files $uri = 404;
devilbox-httpd-1  |         include fastcgi_params;
devilbox-httpd-1  |         # https://stackoverflow.com/questions/1733306/nginx-errors-readv-and-recv-failed/51457613#51457613
devilbox-httpd-1  |         fastcgi_keep_conn off;
devilbox-httpd-1  |         fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
devilbox-httpd-1  |         fastcgi_split_path_info ^(.+\.php)(.*)$;
devilbox-httpd-1  |         fastcgi_pass 172.16.238.10:9000;
devilbox-httpd-1  |         fastcgi_read_timeout 1800;
devilbox-httpd-1  |         fastcgi_index index.php;
devilbox-httpd-1  |         fastcgi_intercept_errors on;
devilbox-httpd-1  |     }
devilbox-httpd-1  |     # Alias Definition
devilbox-httpd-1  |     location ~ /devilbox-api/ {
devilbox-httpd-1  |         root  /var/www/default/api;
devilbox-httpd-1  |     }
devilbox-httpd-1  |     # Alias Definition
devilbox-httpd-1  |     location ~ /vhost.d/ {
devilbox-httpd-1  |         root  /etc/httpd;
devilbox-httpd-1  |     }
devilbox-httpd-1  |     # Deny Definition
devilbox-httpd-1  |     location ~ /\.git {
devilbox-httpd-1  |         deny all;
devilbox-httpd-1  |     }
devilbox-httpd-1  |     # Deny Definition
devilbox-httpd-1  |     location ~ /\.ht.* {
devilbox-httpd-1  |         deny all;
devilbox-httpd-1  |     }
devilbox-httpd-1  |     # Status Page
devilbox-httpd-1  |     location ~ /devilbox-httpd-status {
devilbox-httpd-1  |         stub_status on;
devilbox-httpd-1  |         access_log off;
devilbox-httpd-1  |     }
devilbox-httpd-1  |     # Custom directives
devilbox-httpd-1  | }
devilbox-httpd-1  | [INFO] Existing Certificate Authority files found in: /ca
devilbox-httpd-1  | [CMD]  mkdir -p /etc/httpd/cert/main
devilbox-httpd-1  | [CMD]  cert-gen -v -c DE -s Berlin -l Berlin -o Devilbox -u Devilbox -n 'localhost' -e 'admin@localhost' -a 'localhost *.localhost devilbox *.devilbox httpd' "/ca/devilbox-ca.key" "/ca/devilbox-ca.crt" "/etc/httpd/cert/main/localhost.key" "/etc/httpd/cert/main/localhost.csr" "/etc/httpd/cert/main/localhost.crt"
devilbox-httpd-1  | cert-gen: [INFO] Create CSR file: /etc/httpd/cert/main/localhost.csr
devilbox-httpd-1  | cert-gen: [INFO] Create CRT file: /etc/httpd/cert/main/localhost.crt
devilbox-httpd-1  | cert-gen: [INFO] Verify CRT file: /etc/httpd/cert/main/localhost.crt
devilbox-httpd-1  | cert-gen: [INFO] Verify CRT against CA file: /ca/devilbox-ca.crt
devilbox-httpd-1  | [INFO] Fixing ownership (recursively) in: /ca
devilbox-httpd-1  | [CMD]  chown -R 1000:1000 /ca
devilbox-httpd-1  | [INFO] Setting Nginx worker_processes to: auto
devilbox-httpd-1  | [CMD]  sed -i'' 's/__WORKER_PROCESSES__/auto/g' /etc/nginx/nginx.conf
devilbox-httpd-1  | [INFO] Setting Nginx worker_connections to: 1024
devilbox-httpd-1  | [CMD]  sed -i'' 's/__WORKER_CONNECTIONS__/1024/g' /etc/nginx/nginx.conf
devilbox-mysql-1  | 2023-01-28 02:29:06+00:00 [Note] [Entrypoint]: Entrypoint script for MariaDB Server 1:10.6.11+maria~ubu2004 started.
devilbox-redis-1  | 1:C 28 Jan 2023 02:29:06.824 # oO0OoO0OoO0Oo Redis is starting oO0OoO0OoO0Oo
devilbox-redis-1  | 1:C 28 Jan 2023 02:29:06.824 # Redis version=7.0.8, bits=64, commit=00000000, modified=0, pid=1, just started
devilbox-redis-1  | 1:C 28 Jan 2023 02:29:06.824 # Warning: no config file specified, using the default config. In order to specify a config file use redis-server /path/to/redis.conf
devilbox-redis-1  | 1:M 28 Jan 2023 02:29:06.825 * monotonic clock: POSIX clock_gettime
devilbox-redis-1  | 1:M 28 Jan 2023 02:29:06.825 * Running mode=standalone, port=6379.
devilbox-redis-1  | 1:M 28 Jan 2023 02:29:06.825 # Server initialized
devilbox-redis-1  | 1:M 28 Jan 2023 02:29:06.825 # WARNING Memory overcommit must be enabled! Without it, a background save or replication may fail under low memory condition. Being disabled, it can can also cause failures without low memory condition, see https://github.com/jemalloc/jemalloc/issues/1328. To fix this issue add 'vm.overcommit_memory = 1' to /etc/sysctl.conf and then reboot or run the command 'sysctl vm.overcommit_memory=1' for this to take effect.
devilbox-redis-1  | 1:M 28 Jan 2023 02:29:06.826 * Loading RDB produced by version 7.0.8
devilbox-redis-1  | 1:M 28 Jan 2023 02:29:06.826 * RDB age 845 seconds
devilbox-redis-1  | 1:M 28 Jan 2023 02:29:06.826 * RDB memory usage when created 0.82 Mb
devilbox-redis-1  | 1:M 28 Jan 2023 02:29:06.826 * Done loading RDB, keys loaded: 0, keys expired: 0.
devilbox-redis-1  | 1:M 28 Jan 2023 02:29:06.826 * DB loaded from disk: 0.000 seconds
devilbox-redis-1  | 1:M 28 Jan 2023 02:29:06.826 * Ready to accept connections
devilbox-httpd-1  | [INFO] -------------------------------------------------------------------------
devilbox-httpd-1  | [INFO] Main Entrypoint
devilbox-httpd-1  | [INFO] -------------------------------------------------------------------------
devilbox-httpd-1  | [DONE] Starting supervisord: 4.2.4 [HTTPD: nginx/1.22.1]
devilbox-mysql-1  | 2023-01-28 02:29:07+00:00 [Note] [Entrypoint]: Switching to dedicated user 'mysql'
devilbox-mysql-1  | 2023-01-28 02:29:07+00:00 [Note] [Entrypoint]: Entrypoint script for MariaDB Server 1:10.6.11+maria~ubu2004 started.
devilbox-mysql-1  | 2023-01-28 02:29:07+00:00 [Note] [Entrypoint]: MariaDB upgrade not required
devilbox-mysql-1  | 2023-01-28  2:29:07 0 [Note] mysqld (server 10.6.11-MariaDB-1:10.6.11+maria~ubu2004-log) starting as process 1 ...
devilbox-mysql-1  | 2023-01-28  2:29:07 0 [Note] InnoDB: Compressed tables use zlib 1.2.11
devilbox-mysql-1  | 2023-01-28  2:29:07 0 [Note] InnoDB: Number of pools: 1
devilbox-mysql-1  | 2023-01-28  2:29:07 0 [Note] InnoDB: Using crc32 + pclmulqdq instructions
devilbox-mysql-1  | 2023-01-28  2:29:07 0 [Note] mysqld: O_TMPFILE is not supported on /tmp (disabling future attempts)
devilbox-mysql-1  | 2023-01-28  2:29:07 0 [Note] InnoDB: Using Linux native AIO
devilbox-mysql-1  | 2023-01-28  2:29:07 0 [Note] InnoDB: Initializing buffer pool, total size = 134217728, chunk size = 134217728
devilbox-mysql-1  | 2023-01-28  2:29:07 0 [Note] InnoDB: Completed initialization of buffer pool
devilbox-php-1    | [INFO] Forwarding httpd:80 to 127.0.0.1:80 inside this docker.
devilbox-php-1    | [INFO] Forwarding httpd:443 to 127.0.0.1:443 inside this docker.
devilbox-mysql-1  | 2023-01-28  2:29:07 0 [Note] InnoDB: 128 rollback segments are active.
devilbox-php-1    | [INFO] Forwarding mysql:3306 to 127.0.0.1:3306 inside this docker.
devilbox-mysql-1  | 2023-01-28  2:29:07 0 [Note] InnoDB: Creating shared tablespace for temporary tables
devilbox-mysql-1  | 2023-01-28  2:29:07 0 [Note] InnoDB: Setting file './ibtmp1' size to 12 MB. Physically writing the file full; Please wait ...
devilbox-mysql-1  | 2023-01-28  2:29:07 0 [Note] InnoDB: File './ibtmp1' size is now 12 MB.
devilbox-mysql-1  | 2023-01-28  2:29:07 0 [Note] InnoDB: 10.6.11 started; log sequence number 613055027; transaction id 402770
devilbox-mysql-1  | 2023-01-28  2:29:07 0 [Note] InnoDB: Loading buffer pool(s) from /var/lib/mysql/ib_buffer_pool
devilbox-mysql-1  | 2023-01-28  2:29:07 0 [Note] Plugin 'FEEDBACK' is disabled.
devilbox-php-1    | [INFO] Forwarding pgsql:5432 to 127.0.0.1:5432 inside this docker.
devilbox-mysql-1  | 2023-01-28  2:29:07 0 [Note] Server socket created on IP: '0.0.0.0'.
devilbox-mysql-1  | 2023-01-28  2:29:07 0 [Note] Server socket created on IP: '::'.
devilbox-mysql-1  | 2023-01-28  2:29:07 0 [Note] mysqld: ready for connections.
devilbox-mysql-1  | Version: '10.6.11-MariaDB-1:10.6.11+maria~ubu2004-log'  socket: '/run/mysqld/mysqld.sock'  port: 3306  mariadb.org binary distribution
devilbox-php-1    | [INFO] Forwarding redis:6379 to 127.0.0.1:6379 inside this docker.
devilbox-php-1    | [INFO] Forwarding memcd:11211 to 127.0.0.1:11211 inside this docker.
devilbox-php-1    | [INFO] Forwarding mongo:27017 to 127.0.0.1:27017 inside this docker.
devilbox-php-1    | [INFO] Forwarding elastic:9200 to 127.0.0.1:9200 inside this docker.
devilbox-php-1    | [INFO] Forwarding txtai:8001 to 127.0.0.1:8001 inside this docker.
devilbox-php-1    | [INFO] Enabling 'socat-80-httpd-80' to be started by supervisord
devilbox-php-1    | [INFO] Enabling 'socat-443-httpd-443' to be started by supervisord
devilbox-php-1    | [INFO] Enabling 'socat-3306-mysql-3306' to be started by supervisord
devilbox-php-1    | [INFO] Enabling 'socat-5432-pgsql-5432' to be started by supervisord
devilbox-php-1    | [INFO] Enabling 'socat-6379-redis-6379' to be started by supervisord
devilbox-php-1    | [INFO] Enabling 'socat-11211-memcd-11211' to be started by supervisord
devilbox-php-1    | [INFO] Enabling 'socat-27017-mongo-27017' to be started by supervisord
devilbox-php-1    | [INFO] Enabling 'socat-9200-elastic-9200' to be started by supervisord
devilbox-php-1    | [INFO] Enabling 'socat-8001-txtai-8001' to be started by supervisord
devilbox-php-1    | [INFO] Enabling 'rsyslogd' to be started by supervisord
devilbox-php-1    | [INFO] Enabling 'postfix' to be started by supervisord
devilbox-php-1    | [INFO] Enabling 'php-fpm' to be started by supervisord
devilbox-php-1    | [INFO] PHP.ini: xdebug.ini -> /usr/local/etc/php/conf.d/yyy-devilbox-user-runtime-xdebug.ini
devilbox-php-1    | root $ cp /etc/php-custom.d/xdebug.ini /usr/local/etc/php/conf.d/yyy-devilbox-user-runtime-xdebug.ini
devilbox-php-1    | root $ find /usr/local/etc/php/conf.d -type f -iname '*.ini' -exec chmod 0644 "{}" \;
devilbox-mysql-1  | 2023-01-28  2:29:07 0 [Note] InnoDB: Buffer pool(s) load completed at 230128  2:29:07
devilbox-php-1    | [INFO] PHP-FPM.conf: devilbox-fpm.conf -> /usr/local/etc/php-fpm.d/yyy-devilbox-user-runtime-devilbox-fpm.conf
devilbox-php-1    | root $ cp /etc/php-fpm-custom.d/devilbox-fpm.conf /usr/local/etc/php-fpm.d/yyy-devilbox-user-runtime-devilbox-fpm.conf
devilbox-php-1    | root $ find /usr/local/etc/php-fpm.d -type f -iname '*.conf' -exec chmod 0644 "{}" \;
devilbox-php-1    | [INFO] $ENABLE_MODULES set, but empty. Not enabling any PHP modules.
devilbox-php-1    | [INFO] Disabling the following PHP modules: oci8,PDO_OCI,pdo_sqlsrv,sqlsrv,rdkafka,swoole,psr,phalcon
devilbox-php-1    | root $ rm /usr/local/etc/php/conf.d/docker-php-ext-oci8.ini
devilbox-php-1    | root $ rm /usr/local/etc/php/conf.d/docker-php-ext-pdo_sqlsrv.ini
devilbox-php-1    | root $ rm /usr/local/etc/php/conf.d/docker-php-ext-sqlsrv.ini
devilbox-php-1    | root $ rm /usr/local/etc/php/conf.d/docker-php-ext-rdkafka.ini
devilbox-php-1    | root $ rm /usr/local/etc/php/conf.d/docker-php-ext-swoole.ini
devilbox-php-1    | root $ chown devilbox:devilbox /etc/mysqldump-secure.conf
devilbox-php-1    | root $ chown devilbox:devilbox /etc/mysqldump-secure.cnf
devilbox-php-1    | root $ chown devilbox:devilbox /var/log/mysqldump-secure.log
devilbox-php-1    | root $ chown devilbox:devilbox /shared/backups/mysql
devilbox-php-1    | [INFO] $MYSQL_BACKUP_USER set for mysqldump-secure. Changing to 'root'
devilbox-php-1    | root $ sed -i'' 's/^user.*/user = root/g' /etc/mysqldump-secure.cnf
devilbox-php-1    | [INFO] $MYSQL_BACKUP_PASS set for mysqldump-secure. Changing to '******'
devilbox-php-1    | root $ perl -pi -e 's/^password.*/password = /g' /etc/mysqldump-secure.cnf
devilbox-php-1    | [INFO] $MYSQL_BACKUP_HOST set for mysqldump-secure. Changing to 'mysql'
devilbox-php-1    | root $ sed -i'' 's/^host.*/host = mysql/g' /etc/mysqldump-secure.cnf
devilbox-php-1    | root $ chown devilbox:devilbox /shared/backups
devilbox-php-1    | root $ chown devilbox:devilbox /shared/httpd
devilbox-php-1    | root $ chmod 0755 /shared/backups
devilbox-php-1    | root $ chmod 0755 /shared/httpd
devilbox-php-1    | root $ cp /ca/devilbox-ca.crt /usr/local/share/ca-certificates/devilbox-devilbox-ca.crt
devilbox-php-1    | root $ update-ca-certificates
devilbox-php-1    | Updating certificates in /etc/ssl/certs...
devilbox-php-1    | 1 added, 0 removed; done.
devilbox-php-1    | Running hooks in /etc/ca-certificates/update.d...
devilbox-php-1    | done.
devilbox-php-1    | [INFO] Starting supervisord
devilbox-php-1    | 2023-01-28 02:29:08,772 WARN No file matches via include "/etc/supervisor/custom.d/*.conf"
devilbox-php-1    | 2023-01-28 02:29:08,772 INFO Included extra file "/etc/supervisor/conf.d/php-fpm.conf" during parsing
devilbox-php-1    | 2023-01-28 02:29:08,772 INFO Included extra file "/etc/supervisor/conf.d/postfix.conf" during parsing
devilbox-php-1    | 2023-01-28 02:29:08,772 INFO Included extra file "/etc/supervisor/conf.d/rsyslogd.conf" during parsing
devilbox-php-1    | 2023-01-28 02:29:08,772 INFO Included extra file "/etc/supervisor/conf.d/socat-11211-memcd-11211.conf" during parsing
devilbox-php-1    | 2023-01-28 02:29:08,772 INFO Included extra file "/etc/supervisor/conf.d/socat-27017-mongo-27017.conf" during parsing
devilbox-php-1    | 2023-01-28 02:29:08,772 INFO Included extra file "/etc/supervisor/conf.d/socat-3306-mysql-3306.conf" during parsing
devilbox-php-1    | 2023-01-28 02:29:08,772 INFO Included extra file "/etc/supervisor/conf.d/socat-443-httpd-443.conf" during parsing
devilbox-php-1    | 2023-01-28 02:29:08,772 INFO Included extra file "/etc/supervisor/conf.d/socat-5432-pgsql-5432.conf" during parsing
devilbox-php-1    | 2023-01-28 02:29:08,772 INFO Included extra file "/etc/supervisor/conf.d/socat-6379-redis-6379.conf" during parsing
devilbox-php-1    | 2023-01-28 02:29:08,772 INFO Included extra file "/etc/supervisor/conf.d/socat-80-httpd-80.conf" during parsing
devilbox-php-1    | 2023-01-28 02:29:08,772 INFO Included extra file "/etc/supervisor/conf.d/socat-8001-txtai-8001.conf" during parsing
devilbox-php-1    | 2023-01-28 02:29:08,772 INFO Included extra file "/etc/supervisor/conf.d/socat-9200-elastic-9200.conf" during parsing
devilbox-php-1    | 2023-01-28 02:29:08,772 INFO Set uid to user 0 succeeded
devilbox-php-1    | 2023-01-28 02:29:08,774 INFO supervisord started with pid 1
devilbox-php-1    | 2023-01-28 02:29:09,776 INFO spawned: 'rsyslogd' with pid 1550
devilbox-php-1    | 2023-01-28 02:29:09,777 INFO spawned: 'php-fpm' with pid 1551
devilbox-php-1    | 2023-01-28 02:29:09,778 INFO spawned: 'postfix' with pid 1552
devilbox-php-1    | 2023-01-28 02:29:09,780 INFO spawned: 'socat-11211-memcd-11211' with pid 1553
devilbox-php-1    | 2023-01-28 02:29:09,782 INFO spawned: 'socat-27017-mongo-27017' with pid 1554
devilbox-php-1    | 2023-01-28 02:29:09,784 INFO spawned: 'socat-3306-mysql-3306' with pid 1558
devilbox-php-1    | 2023-01-28 02:29:09,786 INFO spawned: 'socat-443-httpd-443' with pid 1559
devilbox-php-1    | 2023-01-28 02:29:09,788 INFO spawned: 'socat-5432-pgsql-5432' with pid 1560
devilbox-php-1    | 2023-01-28 02:29:09,790 INFO spawned: 'socat-6379-redis-6379' with pid 1561
devilbox-php-1    | 2023-01-28 02:29:09,791 INFO spawned: 'socat-80-httpd-80' with pid 1562
devilbox-php-1    | 2023-01-28 02:29:09,793 INFO spawned: 'socat-8001-txtai-8001' with pid 1563
devilbox-php-1    | 2023-01-28 02:29:09,795 INFO spawned: 'socat-9200-elastic-9200' with pid 1564
devilbox-php-1    | [28-Jan-2023 02:29:09] NOTICE: fpm is running, pid 1551
devilbox-php-1    | [28-Jan-2023 02:29:09] NOTICE: ready to handle connections
devilbox-php-1    | 2023-01-28 02:29:10,838 INFO success: rsyslogd entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
devilbox-php-1    | 2023-01-28 02:29:10,838 INFO success: php-fpm entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
devilbox-php-1    | 2023-01-28 02:29:10,838 INFO success: postfix entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
devilbox-php-1    | 2023-01-28 02:29:10,838 INFO success: socat-11211-memcd-11211 entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
devilbox-php-1    | 2023-01-28 02:29:10,838 INFO success: socat-27017-mongo-27017 entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
devilbox-php-1    | 2023-01-28 02:29:10,839 INFO success: socat-3306-mysql-3306 entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
devilbox-php-1    | 2023-01-28 02:29:10,839 INFO success: socat-443-httpd-443 entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
devilbox-php-1    | 2023-01-28 02:29:10,839 INFO success: socat-5432-pgsql-5432 entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
devilbox-php-1    | 2023-01-28 02:29:10,839 INFO success: socat-6379-redis-6379 entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
devilbox-php-1    | 2023-01-28 02:29:10,839 INFO success: socat-80-httpd-80 entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
devilbox-php-1    | 2023-01-28 02:29:10,839 INFO success: socat-8001-txtai-8001 entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
devilbox-php-1    | 2023-01-28 02:29:10,839 INFO success: socat-9200-elastic-9200 entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
devilbox-php-1    | 172.16.238.11 -  28/Jan/2023:02:29:29 +0000 "GET /index.php" 302
devilbox-php-1    | 172.16.238.11 -  28/Jan/2023:02:29:30 +0000 "GET /wp-login.php" 200
devilbox-php-1    | 172.16.238.11 -  28/Jan/2023:02:29:30 +0000 "POST /wp-cron.php" 200
devilbox-php-1    | 172.16.238.11 -  28/Jan/2023:02:29:31 +0000 "GET /index.php" 302
devilbox-php-1    | 172.16.238.11 -  28/Jan/2023:02:29:32 +0000 "GET /wp-login.php" 200
devilbox-php-1    | 172.16.238.11 -  28/Jan/2023:02:30:32 +0000 "POST /wp-admin/admin-ajax.php" 200
devilbox-php-1    | 172.16.238.11 -  28/Jan/2023:02:32:33 +0000 "POST /wp-admin/admin-ajax.php" 200
devilbox-php-1    | 172.16.238.11 -  28/Jan/2023:02:34:34 +0000 "POST /wp-admin/admin-ajax.php" 200
devilbox-php-1    | 172.16.238.11 -  28/Jan/2023:02:36:35 +0000 "POST /wp-admin/admin-ajax.php" 200
devilbox-php-1    | 172.16.238.11 -  28/Jan/2023:02:38:36 +0000 "POST /wp-admin/admin-ajax.php" 200

(Optional) Additional information

No response

The text was updated successfully, but these errors were encountered:

cytopia · 2023-01-30T10:33:50Z

@nickchomey fix is on the way here: #958

nickchomey added bug triage Needs triaging labels Jan 28, 2023

nickchomey assigned cytopia Jan 28, 2023

cytopia removed the triage Needs triaging label Jan 28, 2023

cytopia linked a pull request Jan 30, 2023 that will close this issue

Release v3.0.0 beta 0.4 #958

Open

john-ea mentioned this issue Mar 28, 2024

Release/v3.0.0 beta 0.4 john-ea/devilbox#1

Merged

nntoan mentioned this issue May 7, 2024

Release/v3.0.0 beta 0.4 devilbox-community/devilbox#1

Merged

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

[Bug]: Docker Logging doesnt seem to work properly in v3.0.0-beta-0.3 #956

[Bug]: Docker Logging doesnt seem to work properly in v3.0.0-beta-0.3 #956

nickchomey commented Jan 28, 2023 •

edited

Loading

cytopia commented Jan 30, 2023

[Bug]: Docker Logging doesnt seem to work properly in v3.0.0-beta-0.3 #956

[Bug]: Docker Logging doesnt seem to work properly in v3.0.0-beta-0.3 #956

Comments

nickchomey commented Jan 28, 2023 • edited Loading

Have you already looked into this bug?

(Optional) Error message

What went wrong?

Expected behaviour

How can we reproduce the bug?

Host Operating System

Host Platform (amd64, arm64, other)

(Linux only) Is SELinux enabled?

Docker version

Docker Compose version

Devilbox version

Have you removed stopped containers before starting?

Have you pulled latest Docker images before starting?

Devilbox start command

Config: .env file

Config: docker-compose.override.yml

Config: ./check-config.sh

Log: docker-compose logs

(Optional) Additional information

cytopia commented Jan 30, 2023

nickchomey commented Jan 28, 2023 •

edited

Loading