buffer.mli

(**************************************************************************)
(*                                                                        *)
(*                                 OCaml                                  *)
(*                                                                        *)
(*   Pierre Weis and Xavier Leroy, projet Cristal, INRIA Rocquencourt     *)
(*                                                                        *)
(*   Copyright 1999 Institut National de Recherche en Informatique et     *)
(*     en Automatique.                                                    *)
(*                                                                        *)
(*   All rights reserved.  This file is distributed under the terms of    *)
(*   the GNU Lesser General Public License version 2.1, with the          *)
(*   special exception on linking described in the file LICENSE.          *)
(*                                                                        *)
(**************************************************************************)

(** Extensible buffers.

   This module implements buffers that automatically expand
   as necessary.  It provides accumulative concatenation of strings
   in quasi-linear time (instead of quadratic time when strings are
   concatenated pairwise).
*)

type t
(** The abstract type of buffers. *)

val create : int -> t
(** [create n] returns a fresh buffer, initially empty.
   The [n] parameter is the initial size of the internal byte sequence
   that holds the buffer contents. That byte sequence is automatically
   reallocated when more than [n] characters are stored in the buffer,
   but shrinks back to [n] characters when [reset] is called.
   For best performance, [n] should be of the same order of magnitude
   as the number of characters that are expected to be stored in
   the buffer (for instance, 80 for a buffer that holds one output
   line).  Nothing bad will happen if the buffer grows beyond that
   limit, however. In doubt, take [n = 16] for instance.
   If [n] is not between 1 and {!Sys.max_string_length}, it will
   be clipped to that interval. *)

val contents : t -> string
(** Return a copy of the current contents of the buffer.
    The buffer itself is unchanged. *)

val to_bytes : t -> bytes
(** Return a copy of the current contents of the buffer.
    The buffer itself is unchanged.
    @since 4.02 *)

val sub : t -> int -> int -> string
(** [Buffer.sub b off len] returns a copy of [len] bytes from the
    current contents of the buffer [b], starting at offset [off].

    Raise [Invalid_argument] if [srcoff] and [len] do not designate a valid
    range of [b]. *)

val blit : t -> int -> bytes -> int -> int -> unit
(** [Buffer.blit src srcoff dst dstoff len] copies [len] characters from
   the current contents of the buffer [src], starting at offset [srcoff]
   to [dst], starting at character [dstoff].

   Raise [Invalid_argument] if [srcoff] and [len] do not designate a valid
   range of [src], or if [dstoff] and [len] do not designate a valid
   range of [dst].
   @since 3.11.2
*)

val nth : t -> int -> char
(** Get the n-th character of the buffer. Raise [Invalid_argument] if
    index out of bounds *)

val length : t -> int
(** Return the number of characters currently contained in the buffer. *)

val clear : t -> unit
(** Empty the buffer. *)

val reset : t -> unit
(** Empty the buffer and deallocate the internal byte sequence holding the
   buffer contents, replacing it with the initial internal byte sequence
   of length [n] that was allocated by {!Buffer.create} [n].
   For long-lived buffers that may have grown a lot, [reset] allows
   faster reclamation of the space used by the buffer. *)

val add_char : t -> char -> unit
(** [add_char b c] appends the character [c] at the end of buffer [b]. *)

val add_utf_8_uchar : t -> Uchar.t -> unit
(** [add_utf_8_uchar b u] appends the {{:https://tools.ietf.org/html/rfc3629}
    UTF-8} encoding of [u] at the end of buffer [b].

    @since 4.06.0 *)

val add_utf_16le_uchar : t -> Uchar.t -> unit
(** [add_utf_16le_uchar b u] appends the
    {{:https://tools.ietf.org/html/rfc2781}UTF-16LE} encoding of [u]
    at the end of buffer [b].

    @since 4.06.0 *)

val add_utf_16be_uchar : t -> Uchar.t -> unit
(** [add_utf_16be_uchar b u] appends the
    {{:https://tools.ietf.org/html/rfc2781}UTF-16BE} encoding of [u]
    at the end of buffer [b].

    @since 4.06.0 *)

val add_string : t -> string -> unit
(** [add_string b s] appends the string [s] at the end of buffer [b]. *)

val add_bytes : t -> bytes -> unit
(** [add_bytes b s] appends the byte sequence [s] at the end of buffer [b].
    @since 4.02 *)

val add_substring : t -> string -> int -> int -> unit
(** [add_substring b s ofs len] takes [len] characters from offset
   [ofs] in string [s] and appends them at the end of buffer [b]. *)

val add_subbytes : t -> bytes -> int -> int -> unit
(** [add_subbytes b s ofs len] takes [len] characters from offset
    [ofs] in byte sequence [s] and appends them at the end of buffer [b].
    @since 4.02 *)

val add_substitute : t -> (string -> string) -> string -> unit
(** [add_substitute b f s] appends the string pattern [s] at the end
   of buffer [b] with substitution.
   The substitution process looks for variables into
   the pattern and substitutes each variable name by its value, as
   obtained by applying the mapping [f] to the variable name. Inside the
   string pattern, a variable name immediately follows a non-escaped
   [$] character and is one of the following:
   - a non empty sequence of alphanumeric or [_] characters,
   - an arbitrary sequence of characters enclosed by a pair of
   matching parentheses or curly brackets.
   An escaped [$] character is a [$] that immediately follows a backslash
   character; it then stands for a plain [$].
   Raise [Not_found] if the closing character of a parenthesized variable
   cannot be found. *)

val add_buffer : t -> t -> unit
(** [add_buffer b1 b2] appends the current contents of buffer [b2]
   at the end of buffer [b1].  [b2] is not modified. *)

val add_channel : t -> in_channel -> int -> unit
(** [add_channel b ic n] reads at most [n] characters from the
   input channel [ic] and stores them at the end of buffer [b].
   Raise [End_of_file] if the channel contains fewer than [n]
   characters. In this case, the characters are still added to
   the buffer, so as to avoid loss of data. *)

val output_buffer : out_channel -> t -> unit
(** [output_buffer oc b] writes the current contents of buffer [b]
   on the output channel [oc]. *)

val truncate : t -> int -> unit
(** [truncate b len] truncates the length of [b] to [len]
  Note: the internal byte sequence is not shortened.
  Raise [Invalid_argument] if [len < 0] or [len > length b].
  @since 4.05.0 *)

(** {1 Iterators} *)

val to_seq : t -> char Seq.t
(** Iterate on the buffer, in increasing order.
    Modification of the buffer during iteration is undefined behavior.
    @since 4.07 *)

val to_seqi : t -> (int * char) Seq.t
(** Iterate on the buffer, in increasing order, yielding indices along chars.
    Modification of the buffer during iteration is undefined behavior.
    @since 4.07 *)

val add_seq : t -> char Seq.t -> unit
(** Add chars to the buffer
    @since 4.07 *)

val of_seq : char Seq.t -> t
(** Create a buffer from the generator
    @since 4.07 *)

(** {1 Binary encoding of integers} *)

(** The functions in this section append binary encodings of integers
    to buffers.

    Little-endian (resp. big-endian) encoding means that least
    (resp. most) significant bytes are stored first.  Big-endian is
    also known as network byte order.  Native-endian encoding is
    either little-endian or big-endian depending on {!Sys.big_endian}.

    32-bit and 64-bit integers are represented by the [int32] and
    [int64] types, which can be interpreted either as signed or
    unsigned numbers.

    8-bit and 16-bit integers are represented by the [int] type,
    which has more bits than the binary encoding.  Functions that
    encode these values truncate their inputs to their least
    significant bytes.
*)

val add_uint8 : t -> int -> unit
(** [add_uint8 b i] appends a binary unsigned 8-bit integer [i] to
    [b].
    @since 4.08
*)

val add_int8 : t -> int -> unit
(** [add_int8 b i] appends a binary signed 8-bit integer [i] to
    [b].
    @since 4.08
*)

val add_uint16_ne : t -> int -> unit
(** [add_uint16_ne b i] appends a binary native-endian unsigned 16-bit
    integer [i] to [b].
    @since 4.08
*)

val add_uint16_be : t -> int -> unit
(** [add_uint16_be b i] appends a binary big-endian unsigned 16-bit
    integer [i] to [b].
    @since 4.08
*)

val add_uint16_le : t -> int -> unit
(** [add_uint16_le b i] appends a binary little-endian unsigned 16-bit
    integer [i] to [b].
    @since 4.08
*)

val add_int16_ne : t -> int -> unit
(** [add_int16_ne b i] appends a binary native-endian signed 16-bit
    integer [i] to [b].
    @since 4.08
*)

val add_int16_be : t -> int -> unit
(** [add_int16_be b i] appends a binary big-endian signed 16-bit
    integer [i] to [b].
    @since 4.08
*)

val add_int16_le : t -> int -> unit
(** [add_int16_le b i] appends a binary little-endian signed 16-bit
    integer [i] to [b].
    @since 4.08
*)

val add_int32_ne : t -> int32 -> unit
(** [add_int32_ne b i] appends a binary native-endian 32-bit integer
    [i] to [b].
    @since 4.08
*)

val add_int32_be : t -> int32 -> unit
(** [add_int32_be b i] appends a binary big-endian 32-bit integer
    [i] to [b].
    @since 4.08
*)

val add_int32_le : t -> int32 -> unit
(** [add_int32_le b i] appends a binary little-endian 32-bit integer
    [i] to [b].
    @since 4.08
*)

val add_int64_ne  : t -> int64 -> unit
(** [add_int64_ne b i] appends a binary native-endian 64-bit integer
    [i] to [b].
    @since 4.08
*)

val add_int64_be : t -> int64 -> unit
(** [add_int64_be b i] appends a binary big-endian 64-bit integer
    [i] to [b].
    @since 4.08
*)

val add_int64_le : t -> int64 -> unit
(** [add_int64_ne b i] appends a binary little-endian 64-bit integer
    [i] to [b].
    @since 4.08
*)