diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h index 1580f9c2a320..a05103e2fb52 100644 --- a/drivers/net/ethernet/intel/i40e/i40e.h +++ b/drivers/net/ethernet/intel/i40e/i40e.h @@ -973,6 +973,7 @@ struct i40e_q_vector { struct rcu_head rcu; /* to avoid race with update stats on free */ char name[I40E_INT_NAME_STR_LEN]; bool arm_wb_state; + bool in_busy_poll; int irq_num; /* IRQ assigned to this q_vector */ } ____cacheline_internodealigned_in_smp; diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index d204c33409c6..676ea7d4192f 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -3871,6 +3871,12 @@ static void i40e_vsi_configure_msix(struct i40e_vsi *vsi) q_vector->tx.target_itr >> 1); q_vector->tx.current_itr = q_vector->tx.target_itr; + /* Set ITR for software interrupts triggered after exiting + * busy-loop polling. + */ + wr32(hw, I40E_PFINT_ITRN(I40E_SW_ITR, vector - 1), + I40E_ITR_20K); + wr32(hw, I40E_PFINT_RATEN(vector - 1), i40e_intrl_usec_to_reg(vsi->int_rate_limit)); diff --git a/drivers/net/ethernet/intel/i40e/i40e_register.h b/drivers/net/ethernet/intel/i40e/i40e_register.h index 7339003aa17c..694cb3e45c1e 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_register.h +++ b/drivers/net/ethernet/intel/i40e/i40e_register.h @@ -328,8 +328,11 @@ #define I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT 3 #define I40E_PFINT_DYN_CTLN_ITR_INDX_MASK I40E_MASK(0x3, I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT) #define I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT 5 +#define I40E_PFINT_DYN_CTLN_INTERVAL_MASK I40E_MASK(0xFFF, I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT) #define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_SHIFT 24 #define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_MASK I40E_MASK(0x1, I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_SHIFT) +#define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_SHIFT 25 +#define I40E_PFINT_DYN_CTLN_SW_ITR_INDX_MASK I40E_MASK(0x3, I40E_PFINT_DYN_CTLN_SW_ITR_INDX_SHIFT) #define I40E_PFINT_ICR0 0x00038780 /* Reset: CORER */ #define I40E_PFINT_ICR0_INTEVENT_SHIFT 0 #define I40E_PFINT_ICR0_INTEVENT_MASK I40E_MASK(0x1, I40E_PFINT_ICR0_INTEVENT_SHIFT) diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index cf8c3d480a4a..e2737875e379 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -2560,7 +2560,22 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget) return failure ? budget : (int)total_rx_packets; } -static inline u32 i40e_buildreg_itr(const int type, u16 itr) +/** + * i40e_buildreg_itr - build a value for writing to I40E_PFINT_DYN_CTLN register + * @itr_idx: interrupt throttling index + * @interval: interrupt throttling interval value in usecs + * @force_swint: force software interrupt + * + * The function builds a value for I40E_PFINT_DYN_CTLN register that + * is used to update interrupt throttling interval for specified ITR index + * and optionally enforces a software interrupt. If the @itr_idx is equal + * to I40E_ITR_NONE then no interval change is applied and only @force_swint + * parameter is taken into account. If the interval change and enforced + * software interrupt are not requested then the built value just enables + * appropriate vector interrupt. + **/ +static u32 i40e_buildreg_itr(enum i40e_dyn_idx itr_idx, u16 interval, + bool force_swint) { u32 val; @@ -2574,23 +2589,33 @@ static inline u32 i40e_buildreg_itr(const int type, u16 itr) * an event in the PBA anyway so we need to rely on the automask * to hold pending events for us until the interrupt is re-enabled * - * The itr value is reported in microseconds, and the register - * value is recorded in 2 microsecond units. For this reason we - * only need to shift by the interval shift - 1 instead of the - * full value. + * We have to shift the given value as it is reported in microseconds + * and the register value is recorded in 2 microsecond units. */ - itr &= I40E_ITR_MASK; + interval >>= 1; + /* 1. Enable vector interrupt + * 2. Update the interval for the specified ITR index + * (I40E_ITR_NONE in the register is used to indicate that + * no interval update is requested) + */ val = I40E_PFINT_DYN_CTLN_INTENA_MASK | - (type << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT) | - (itr << (I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT - 1)); + FIELD_PREP(I40E_PFINT_DYN_CTLN_ITR_INDX_MASK, itr_idx) | + FIELD_PREP(I40E_PFINT_DYN_CTLN_INTERVAL_MASK, interval); + + /* 3. Enforce software interrupt trigger if requested + * (These software interrupts rate is limited by ITR2 that is + * set to 20K interrupts per second) + */ + if (force_swint) + val |= I40E_PFINT_DYN_CTLN_SWINT_TRIG_MASK | + I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_MASK | + FIELD_PREP(I40E_PFINT_DYN_CTLN_SW_ITR_INDX_MASK, + I40E_SW_ITR); return val; } -/* a small macro to shorten up some long lines */ -#define INTREG I40E_PFINT_DYN_CTLN - /* The act of updating the ITR will cause it to immediately trigger. In order * to prevent this from throwing off adaptive update statistics we defer the * update so that it can only happen so often. So after either Tx or Rx are @@ -2609,8 +2634,10 @@ static inline u32 i40e_buildreg_itr(const int type, u16 itr) static inline void i40e_update_enable_itr(struct i40e_vsi *vsi, struct i40e_q_vector *q_vector) { + enum i40e_dyn_idx itr_idx = I40E_ITR_NONE; struct i40e_hw *hw = &vsi->back->hw; - u32 intval; + u16 interval = 0; + u32 itr_val; /* If we don't have MSIX, then we only need to re-enable icr0 */ if (!(vsi->back->flags & I40E_FLAG_MSIX_ENABLED)) { @@ -2632,8 +2659,8 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi, */ if (q_vector->rx.target_itr < q_vector->rx.current_itr) { /* Rx ITR needs to be reduced, this is highest priority */ - intval = i40e_buildreg_itr(I40E_RX_ITR, - q_vector->rx.target_itr); + itr_idx = I40E_RX_ITR; + interval = q_vector->rx.target_itr; q_vector->rx.current_itr = q_vector->rx.target_itr; q_vector->itr_countdown = ITR_COUNTDOWN_START; } else if ((q_vector->tx.target_itr < q_vector->tx.current_itr) || @@ -2642,25 +2669,36 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi, /* Tx ITR needs to be reduced, this is second priority * Tx ITR needs to be increased more than Rx, fourth priority */ - intval = i40e_buildreg_itr(I40E_TX_ITR, - q_vector->tx.target_itr); + itr_idx = I40E_TX_ITR; + interval = q_vector->tx.target_itr; q_vector->tx.current_itr = q_vector->tx.target_itr; q_vector->itr_countdown = ITR_COUNTDOWN_START; } else if (q_vector->rx.current_itr != q_vector->rx.target_itr) { /* Rx ITR needs to be increased, third priority */ - intval = i40e_buildreg_itr(I40E_RX_ITR, - q_vector->rx.target_itr); + itr_idx = I40E_RX_ITR; + interval = q_vector->rx.target_itr; q_vector->rx.current_itr = q_vector->rx.target_itr; q_vector->itr_countdown = ITR_COUNTDOWN_START; } else { /* No ITR update, lowest priority */ - intval = i40e_buildreg_itr(I40E_ITR_NONE, 0); if (q_vector->itr_countdown) q_vector->itr_countdown--; } - if (!test_bit(__I40E_VSI_DOWN, vsi->state)) - wr32(hw, INTREG(q_vector->reg_idx), intval); + /* Do not update interrupt control register if VSI is down */ + if (test_bit(__I40E_VSI_DOWN, vsi->state)) + return; + + /* Update ITR interval if necessary and enforce software interrupt + * if we are exiting busy poll. + */ + if (q_vector->in_busy_poll) { + itr_val = i40e_buildreg_itr(itr_idx, interval, true); + q_vector->in_busy_poll = false; + } else { + itr_val = i40e_buildreg_itr(itr_idx, interval, false); + } + wr32(hw, I40E_PFINT_DYN_CTLN(q_vector->reg_idx), itr_val); } /** @@ -2767,6 +2805,8 @@ int i40e_napi_poll(struct napi_struct *napi, int budget) */ if (likely(napi_complete_done(napi, work_done))) i40e_update_enable_itr(vsi, q_vector); + else + q_vector->in_busy_poll = true; return min(work_done, budget - 1); } diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h index a4f38ab0ecca..054b7d1632e1 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.h +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h @@ -67,6 +67,7 @@ enum i40e_dyn_idx { /* these are indexes into ITRN registers */ #define I40E_RX_ITR I40E_IDX_ITR0 #define I40E_TX_ITR I40E_IDX_ITR1 +#define I40E_SW_ITR I40E_IDX_ITR2 /* Supported RSS offloads */ #define I40E_DEFAULT_RSS_HENA ( \