WaitForDisk

WaitForDisk

Parameters

Parameter	Attribute	DataType	Description	Allowed Values
DiskId	Key	String	Specifies the disk identifier for the disk to wait for.
DiskIdType	Write	String	Specifies the identifier type the DiskId contains. Defaults to Number.	Number, UniqueId, Guid
RetryIntervalSec	Write	Uint32	Specifies the number of seconds to wait for the disk to become available.
RetryCount	Write	Uint32	The number of times to loop the retry interval while waiting for the disk.
IsAvailable	Read	Boolean	Will indicate whether Disk is available.

Description

This resource is used to wait for a disk to become available. The disk to wait for is selected by specifying the DiskId and optionally DiskIdType. The DiskId value can be a Disk Number, Unique Id or Guid.

Important: The Disk Number is not a reliable method of selecting a disk because it has been shown to change between reboots in some environments. It is recommended to use the Unique Id if possible.

The Disk Number, Unique Id and Guid can be identified for a disk by using the PowerShell command:

Get-Disk | Select-Object -Property FriendlyName,DiskNumber,UniqueId,Guid

Note: The Guid for a disk is only assigned once the partition table for the disk has been created (e.g. the disk has been initialized). Therefore to use this method of disk selection the disk must have been initialized by some other method.

Examples

Example 1

This configuration will wait for disk 2 to become available, and then make the disk available as two new formatted volumes, 'G' and 'J', with 'J' using all available space after 'G' has been created. It also creates a new ReFS formated volume on Disk 3 attached as drive letter 'S'.

Configuration Example
{
    Import-DSCResource -ModuleName StorageDsc

    Node localhost
    {
        WaitForDisk Disk2
        {
             DiskId = 2
             RetryIntervalSec = 60
             RetryCount = 60
        }

        Disk GVolume
        {
             DiskId = 2
             DriveLetter = 'G'
             Size = 10GB
        }

        Disk JVolume
        {
             DiskId = 2
             DriveLetter = 'J'
             FSLabel = 'Data'
             DependsOn = '[Disk]GVolume'
        }

        Disk DataVolume
        {
             DiskId = 3
             DriveLetter = 'S'
             Size = 100GB
             FSFormat = 'ReFS'
             AllocationUnitSize = 64KB
        }
    }
}

Example 2

This configuration will wait for disk 2 to become available, and then make the disk available as two new formatted volumes mounted to folders c:\SQLData and c:\SQLLog, with c:\SQLLog using all available space after c:\SQLData has been created.

Configuration Example
{
    Import-DSCResource -ModuleName StorageDsc

    Node localhost
    {
        WaitForDisk Disk2
        {
             DiskId = 2
             RetryIntervalSec = 60
             RetryCount = 60
        }

        DiskAccessPath DataVolume
        {
             DiskId = 2
             AccessPath = 'c:\SQLData'
             Size = 10GB
             FSLabel = 'SQLData1'
             DependsOn = '[WaitForDisk]Disk2'
        }

        DiskAccessPath LogVolume
        {
             DiskId = 2
             AccessPath = 'c:\SQLLog'
             FSLabel = 'SQLLog1'
             DependsOn = '[DiskAccessPath]DataVolume'
        }
    }
}

Example 3

This configuration will wait for disk 2 to become available, and then make the disk available as two new formatted volumes mounted to folders c:\SQLData and c:\SQLLog, with c:\SQLLog using all available space after c:\SQLData has been created.

Configuration Example
{
    Import-DSCResource -ModuleName StorageDsc

    Node localhost
    {
        WaitForDisk Disk2
        {
             DiskId = 2
             RetryIntervalSec = 60
             RetryCount = 60
        }

        DiskAccessPath DataVolume
        {
             DiskId = 2
             AccessPath = 'c:\SQLData'
             Size = 10GB
             FSLabel = 'SQLData1'
             DependsOn = '[WaitForDisk]Disk2'
        }

        DiskAccessPath LogVolume
        {
             DiskId = 2
             AccessPath = 'c:\SQLLog'
             FSLabel = 'SQLLog1'
             DependsOn = '[DiskAccessPath]DataVolume'
        }
    }
}

Example 4

This configuration will wait for disk with Unique Id '5E1E50A401000000001517FFFF0AEB84' to become available, and then make the disk available as two new formatted volumes mounted to folders c:\SQLData and c:\SQLLog, with c:\SQLLog using all available space after c:\SQLData has been created.

Configuration Example
{
    Import-DSCResource -ModuleName StorageDsc

    Node localhost
    {
        WaitForDisk Disk2
        {
             DiskId = '5E1E50A401000000001517FFFF0AEB84'
             DiskIdType = 'UniqueId'
             RetryIntervalSec = 60
             RetryCount = 60
        }

        DiskAccessPath DataVolume
        {
             DiskId = '5E1E50A401000000001517FFFF0AEB84'
             DiskIdType = 'UniqueId'
             AccessPath = 'c:\SQLData'
             Size = 10GB
             FSLabel = 'SQLData1'
             DependsOn = '[WaitForDisk]Disk2'
        }

        DiskAccessPath LogVolume
        {
             DiskId = '5E1E50A401000000001517FFFF0AEB84'
             DiskIdType = 'UniqueId'
             AccessPath = 'c:\SQLLog'
             FSLabel = 'SQLLog1'
             DependsOn = '[DiskAccessPath]DataVolume'
        }
    }
}