The goal of this library is to provide a clean C interface to Bluez, without needing to use DBus commands. Using Bluez over the DBus is quite tricky to say the least, and this library does all the hard work under the hood. As a result, it looks like a 'normal' C library for Bluetooth!
The library focuses on BLE and supports both Central and Peripheral roles. Some interesting facts include:
- Manage/Connect multiple peripherals at the same time
- Support for bonding
- Simplified programming interface for easy coding
- Configurable logging with extensive debugging possibilities
This library uses GLib 2.0. If needed, you can install it using sudo apt install -y libglib2.0-dev.
cmake .
cmake --build .
In order to discover devices, you first need to get hold of a Bluetooth adapter.
You do this by calling binc_adapter_get_default() with your DBus connection as an argument:
int main(void) {
GDBusConnection *dbusConnection = g_bus_get_sync(G_BUS_TYPE_SYSTEM, NULL, NULL);
Adapter *default_adapter = binc_adapter_get_default(dbusConnection);
//...
}The next step is to set any scanfilters and set the callback you want to receive the found devices on:
int main(void) {
// ...
binc_adapter_set_discovery_cb(default_adapter, &on_scan_result);
binc_adapter_set_discovery_filter(default_adapter, -100, NULL, NULL);
binc_adapter_start_discovery(default_adapter);
}When you pass 'NULL' as the 3rd argument to binc_adapter_set_discovery_filter, you indicate that you don't want to filter on service UUIDs. Otherwise you can pass a GPtrArray with a number of service UUIDs that you want to filter on. The 4th argument allows you to filter on a 'pattern' which is defined in Bluez as the 'prefix of an address or name'.
The discovery will deliver all found devices on the callback you provided. You typically check if it is the device you are looking for, stop the discovery and then connect to it:
void on_scan_result(Adapter *default_adapter, Device *device) {
const char* name = binc_device_get_name(device);
if (name != NULL && g_str_has_prefix(name, "Polar")) {
binc_adapter_stop_discovery(default_adapter);
binc_device_set_connection_state_change_cb(device, &on_connection_state_changed);
binc_device_set_services_resolved_cb(device, &on_services_resolved);
binc_device_set_read_char_cb(device, &on_read);
binc_device_set_write_char_cb(device, &on_write);
binc_device_set_notify_char_cb(device, &on_notify);
binc_device_connect(device);
}
}As you can see, just before connecting, you must set up some callbacks for receiving connection state changes and the results of reading/writing to characteristics.
You connect by calling binc_device_connect(device). Then the following sequence will happen:
- first, the connection_state will change to 'connecting'.
- when the device is connected, the connection_state changes to 'connected' and your registered callback will be called. However, you cannot use the device yet because the service discovery has not yet been done.
- Bluez will then start the service discovery automatically and when it finishes, the services_resolved callback is called. So the service_resolved callback is the right place to start reading and writing characteristics or starting notifications.
void on_connection_state_changed(Device *device, ConnectionState state, GError *error) {
if (error != NULL) {
log_debug(TAG, "(dis)connect failed (error %d: %s)", error->code, error->message);
return;
}
log_debug(TAG, "'%s' (%s) state: %s (%d)", binc_device_get_name(device), binc_device_get_address(device), binc_device_get_connection_state_name(device), state);
if (state == DISCONNECTED && binc_device_get_bonding_state(device) != BONDED) {
binc_adapter_remove_device(default_adapter, device);
}
}If a connection attempt fails or times out after 25 seconds, the connection_state callback is called with an error.
To disconnect a connected device, call binc_device_disconnect(device) and the device will be disconnected. Again, the connection_state callback will be called. If you want to remove the device from the DBus after disconnecting, you call binc_adapter_remove_device(default_adapter, device).
We can start using characteristics once the service discovery has been completed.
Typically, we read some characteristics like its model and manufacturer. In order to read or write, you first need to get the Characteristic by using binc_device_get_characteristic(device, DIS_SERVICE, DIS_MANUFACTURER_CHAR).
You need to provide the service UUID and characteristic UUID to find a characteristic:
void on_services_resolved(Device *device) {
Characteristic *manufacturer = binc_device_get_characteristic(device, DIS_SERVICE, DIS_MANUFACTURER_CHAR);
if (manufacturer != NULL) {
binc_characteristic_read(manufacturer);
}
binc_device_read_char(device, DIS_SERVICE, DIS_MODEL_CHAR);
}As you can see, there is also a convenience method binc_device_read_char that will look up a characteristic and do a read if the characteristic is found.
Like all BLE operations, reading and writing are asynchronous operations. So you issue them and they will complete immediately, but you then have to wait for the result to come in on a callback. You register your callback by calling binc_device_set_read_char_cb(device, &on_read).
void on_read(Characteristic *characteristic, GByteArray *byteArray, GError *error) {
const char* uuid = binc_characteristic_get_uuid(characteristic);
if (error != NULL) {
log_debug(TAG, "failed to read '%s' (error %d: %s)", uuid, error->code, error->message);
return;
}
if (byteArray == NULL) return;
if (g_str_equal(uuid, DIS_MANUFACTURER_CHAR)) {
log_debug(TAG, "manufacturer = %s", byteArray->data);
} else if (g_str_equal(uuid, MODEL_CHAR)) {
log_debug(TAG, "model = %s", byteArray->data);
}
}Writing to characteristics works in a similar way. Register your callback using binc_device_set_write_char_cb(device, &on_write). Make sure you check if you can write to the characteristic before attempting it:
void on_services_resolved(Device *device) {
// ...
Characteristic *current_time = binc_device_get_characteristic(device, CTS_SERVICE, CURRENT_TIME_CHAR);
if (current_time != NULL) {
if (binc_characteristic_supports_write(current_time,WITH_RESPONSE)) {
GByteArray *timeBytes = binc_get_current_time();
binc_characteristic_write(current_time, timeBytes, WITH_RESPONSE);
g_byte_array_free(timeBytes, TRUE);
}
}
}Bluez treats notifications and indications in the same way, calling them 'notifications'. If you want to receive notifications you have to 'start' them by calling binc_characteristic_start_notify(). As usual, first register your callback by calling binc_device_set_notify_char_cb(device, &on_notify). Here is an example:
void on_services_resolved(Device *device) {
// ...
Characteristic *temperature = binc_device_get_characteristic(device, HTS_SERVICE_UUID, TEMPERATURE_CHAR);
if (temperature != NULL) {
binc_characteristic_start_notify(temperature);
}
} And then receiving your notifications:
void on_notify(Characteristic *characteristic, GByteArray *byteArray) {
const char* uuid = binc_characteristic_get_uuid(characteristic);
Parser *parser = parser_create(byteArray, LITTLE_ENDIAN);
parser_set_offset(parser, 1);
if (g_str_equal(uuid, TEMPERATURE_CHAR)) {
float temperature = parser_get_float(parser);
log_debug(TAG, "temperature %.1f", temperature);
}
parser_free(parser);
}The Parser object is a helper object that will help you parsing byte arrays.
Bonding is possible with this library. It supports 'confirmation' bonding (JustWorks) and PIN code bonding (passphrase). First you need to register an Agent and set the callbacks for these 2 types of bonding. When creating the agent you can also choose the IO capabilities for your applications, i.e. DISPLAY_ONLY, DISPLAY_YES_NO, KEYBOARD_ONLY, NO_INPUT_NO_OUTPUT, KEYBOARD_DISPLAY. Note that this will affect the bonding behavior.
int main(void) {
// ...
agent = binc_agent_create(default_adapter, "/org/bluez/BincAgent", KEYBOARD_DISPLAY);
binc_agent_set_request_authorization_cb(agent, &on_request_authorization);
binc_agent_set_request_passkey_cb(agent, &on_request_passkey);
}When bonding is starting, one of your callbacks will be called and you should handle the request. In the case of 'confirmation' bonding you either accept (TRUE) or reject (FALSE) the request for bonding:
gboolean on_request_authorization(Device *device) {
log_debug(TAG, "requesting authorization for '%s", binc_device_get_name(device));
return TRUE;
}In the case of PIN code pairing you will have to provide a PIN code, which you probably need to ask to the user of your app:
guint32 on_request_passkey(Device *device) {
guint32 pass = 000000;
log_debug(TAG, "requesting passkey for '%s", binc_device_get_name(device));
log_debug(TAG, "Enter 6 digit pin code: ");
fscanf(stdin, "%d", &pass);
return pass;
}Note that this type of bonding requires a 6 digit pin code!
If you want to initiate bonding yourself, you can call binc_device_pair(). The same callbacks will be called for dealing with authorization or PIN codes.
It is also possible with BINC to create your own peripheral, i.e. start advertising and implementing some services and characteristics.
In Bluez an advertisement is an object on the DBus. By using some basic calls BINC will create this object for you and set the right values. After that, you need to tell the default_adapter to start advertising.
// Build array with services to advertise
GPtrArray *adv_service_uuids = g_ptr_array_new();
g_ptr_array_add(adv_service_uuids, HTS_SERVICE_UUID);
g_ptr_array_add(adv_service_uuids, BLP_SERVICE_UUID);
// Create the advertisement
advertisement = binc_advertisement_create();
binc_advertisement_set_local_name(advertisement, "BINC2");
binc_advertisement_set_services(advertisement, adv_service_uuids);
// Start advertising
binc_adapter_start_advertising(default_adapter, advertisement);
g_ptr_array_free(adv_service_uuids, TRUE);The library also supports setting manufacturer data and service data.
In order to make your peripheral work you need to create an 'app' in Bluez terminology. The steps are:
- Create an app
- Add one or more services
- Add one or more characteristics and descriptors
- Implement read/write/notify callbacks for characteristics
Here is how to setup an app with a service and a characteristic:
// Create an app with a service
app = binc_create_application(default_adapter);
binc_application_add_service(app, HTS_SERVICE_UUID);
binc_application_add_characteristic(
app,
HTS_SERVICE_UUID,
TEMPERATURE_CHAR_UUID,
GATT_CHR_PROP_READ | GATT_CHR_PROP_INDICATE | GATT_CHR_PROP_WRITE);
// Set the callbacks for read/write
binc_application_set_char_read_cb(app, &on_local_char_read);
binc_application_set_char_write_cb(app, &on_local_char_write);
// Register your app
binc_adapter_register_application(default_adapter, app);There are callbacks to be implemented where you can update the value of a characteristic just before the read/write is done. If you accept the read, return NULL, otherwise return an error.
char* on_local_char_read(const Application *app, const char *address, const char* service_uuid, const char* char_uuid) {
if (g_str_equal(service_uuid, HTS_SERVICE_UUID) && g_str_equal(char_uuid, TEMPERATURE_CHAR_UUID)) {
const guint8 bytes[] = {0x06, 0x6f, 0x01, 0x00, 0xff, 0xe6, 0x07, 0x03, 0x03, 0x10, 0x04, 0x00, 0x01};
GByteArray *byteArray = g_byte_array_sized_new(sizeof(bytes));
g_byte_array_append(byteArray, bytes, sizeof(bytes));
binc_application_set_char_value(app, service_uuid, char_uuid, byteArray);
return NULL;
}
return BLUEZ_ERROR_REJECTED;
}
char* on_local_char_write(const Application *app, const char *address, const char *service_uuid,
const char *char_uuid, GByteArray *byteArray) {
// Reject all writes
return BLUEZ_ERROR_REJECTED;
}In order to notify you can use:
void binc_application_notify(const Application *app, const char *service_uuid, const char *char_uuid,
GByteArray *byteArray);The repository includes an example for both the Central and Peripheral role.
- The central example scans for thermometers and reads the thermometer value once it connects.
- The peripheral example acts as a thermometer and can be used in combination with the central example.
The library contains its own logger that you can also use in your application.
- Turn logging on/off:
log_enabled(TRUE) - Set logging level:
log_set_level(LOG_DEBUG) - Log to a file using log rotation:
log_set_filename("mylog.log", 65536, 10) - Log something:
log_debug("MyTag", "Hello %s", "world")
The official Bluez documentation is a bit sparse but can be found here:
- Adapter documentation (for default_adapter)
- GATT documentation (for service, characteristics and descriptors)
- Device documentation (for device)
- Agent documentation (for agent)
You will notice that most original methods and properties are available in this library. In some cases, some adaptations have been done for convenience.
Assuming you have a default installation, you will need to install CMake and GLib:
- sudo apt install -y cmake
- sudo apt install -y libglib2.0-dev