Skip to content

Latest commit

 

History

History
 
 

segment_anything_model

README.md

Interactive annotation in Label Studio with Segment Anything Model

advanced_sam_demo.mp4

Use Facebook's Segment Anything Model with Label Studio! In July 2024, Facebook released an update to the Segement Anything model, called SAM 2. To use this newer model for labeling, see the segment_anything_2_image repo

Quickstart

Using Docker Compose (recommended)

To start the server with the lightweight mobile version of SAM, run the following command:

docker-compose up

GPU support

By default, the docker-compose file runs the model on the CPU. If you have a GPU, you can enable it by adding the following lines in docker-compose.yml:

    environment:
      - NVIDIA_VISIBLE_DEVICES=all
    deploy:
      reservations:
        devices:
          - driver: nvidia
            count: 1
            capabilities: [gpu]

About the models

There are two models in this repo that you can use:

  1. Advanced Segment Anything Model
  2. ONNX Segment Anything Model

Advanced Segment Anything Model

The Advanced Segment Anything Model introduces the ability to combine a multitude of different prompts to achieve a prediction, and the ability to use MobileSAM.

  • Mix one rectangle label with multiple positive keypoints to refine your predictions.
  • Use negative keypoints to remove areas from predictions for increased control.
  • Use MobileSAM, an extremely lightweight alternative to the heavy Segment Anything Model from Facebook, to retrieve predictions. This can run inference within a second using a laptop GPU.

ONNX Segment Anything Model

The ONNX Segment Anything Model gives you the ability to use either a single keypoint or a single rectangle label to prompt the original SAM.

  • This offers a much faster prediction than using the original Segment Anything Model.
  • The downside is that image size must be specified before using the ONNX model, and cannot be generalized to other image sizes while labeling. Also, this does not yet offer the mixed labeling and refinement that AdvancedSAM does.

Model configuration options

Each model has different pros and cons. Consider which is best for your project:

  • AdvancedSAM

    • Mobile SAM Configuration
      • Pros: Lightweight model that can be run on laptops, and can mix many different combinations of input prompts to fine-tune prediction.
      • Cons: Lower accuracy than Facebook's original SAM architecture.
    • Original SAM architecture
      • Pros: Higher accuracy than MobileSAM, with ability to mix many different combinations of input prompts to fine-tune predictions.
      • Cons: Takes long to gather predictions (~2s to create embedding of an image), requires access to good GPUs.

  • ONNXSAM

    • Original SAM Architecture
      • Pros: Much faster than when you use it in Advanced SAM.
      • Cons: Can only use one smart label per prediction. Image size must be defined before generating the ONNX model. Cannot label images with different sizes without running into issues.

Setup

The Label Studio SAM backend works best if you have Local Storage enabled for your project. It is also possible to set up shared local storage, but is not recommended. Currently, the backend does not work with cloud storage (S3, Azure, GCP).

Setting up the Label Studio server

Enabling local storage file serving

You can enable local storage file serving by setting the following variables:

LABEL_STUDIO_LOCAL_FILES_DOCUMENT_ROOT=<path_to_image_data>
LABEL_STUDIO_LOCAL_FILES_SERVING_ENABLED=true

For example, if you're launching Label Studio with Docker, you can enable these variables with

docker run -it -p 8080:8080 \
               -v $(pwd)/mydata:/label-studio/data \
               --env LABEL_STUDIO_LOCAL_FILES_SERVING_ENABLED=true \
               --env LABEL_STUDIO_LOCAL_FILES_DOCUMENT_ROOT=/label-studio/data/images \
               heartexlabs/label-studio:latest

Note the IP address that you are running your Label Studio instance as the LABEL_STUDIO_HOST. This will be necessary for setting up the connection to your SAM model.

Because you are hosting both Label Studio and the ML backend in Docker containers, the hostname localhost will not resolve to the correct address. There are a number of ways to determine your host IP address. These can include calling either ip a or ifconfig from the command line and inspecting the output, or finding the address that has been assigned to your computer through the system network configuration settings.

Obtain your API token

Log into the Label Studio interface (in the example above, at http://<LABEL_STUDIO_HOST>:8080).

Go to the Account & Settings page, and make a note of the Access Token, which we will use later as the LABEL_STUDIO_ACCESS_TOKEN.

Setting up the SAM backend

Clone the repository

Make a clone of this repository on your host system and move it into the working directory.

git clone https://github.com/humansignal/label-studio-ml-backend
cd label-studio-ml-backend/label_studio_ml/examples/segment_anything_model

Using Docker Compose (recommended)

We suggest using Docker Compose to host and run the backend. For GPU support, please consult the Docker Compose GPU Access Guide to understand how to pass through GPU resources to services.

Edit the docker-compose.yml file and fill in the values for the LABEL_STUDIO_HOST and LABEL_STUDIO_ACCESS_TOKEN variables for your particular installation. Be sure to append the port that Label Studio is running on in your LABEL_STUDIO_HOST variable, for example http://192.168.1.36:8080 if Label Studio is running on port 8080.

Run the command docker compose up --build to build the container and run it locally.

Setting up the backend manually

Download model weights

This step is only necessary if you are not using the Docker build for this model.

You can download all weights and models using the following command:

./download_models.sh

Installation requirements

Change your directory to this folder and then install all of the python requirements.

pip install -r requirements.txt

Adjust variables and _wsgi.py depending on your choice of model

You can set the following environment variables to change the behavior of the model.

  • LABEL_STUDIO_HOST sets the endpoint of the Label Studio host. Must begin with http://
  • LABEL_STUDIO_ACCESS_TOKEN sets the API access token for the Label Studio host.
  • SAM_CHOICE selects which model to use.
    • SAM_CHOICE=MobileSAM to use MobileSAM (default)
    • SAM_CHOICE=SAM to use the original SAM model.
    • SAM_CHOICE=ONNX to use the ONNX model.

Start the Backend

You can now manually start the ML backend.

python _wsgi.py

or

docker-compose up

to start the backend in a Docker container

or

MOBILESAM_CHECKPOINT=path/to/mobile_sam.pt label-studio-ml start segment_anything_model/

Note: If you see an error on MacOS, try set the environment variable KMP_DUPLICATE_LIB_OK=True

Set up a project in Label Studio for Segment Anything

Log into your Label Studio instance and perform the following steps.

  1. Create a new project.

  2. Under the Labeling Setup step when creating the project, or under Labeling Interface in the project settings, paste the sample template into the code dialog. Save the interface.

  3. Go to the Model page in the project settings and click Connect Model.

  4. Enter a title for the model, and the URL for the instance of the model you just created.

    If you're running Label Studio in Docker or on another host, you should use the direct IP address of where the model is hosted (localhost will not work). Be sure to include the port number that the model is hosted on (the default is 9090). For example, if the model is hosted on 192.168.1.36, the URL for the model would be http://192.168.1.36:9090

  5. Click Validate and Save.

You can now upload images into your project and begin annotating.

The video also goes over this process, but does part of it while in the newly created project menu.

Creating annotations

See this video tutorial to get a better understanding of the workflow when annotating with SAM.

Use the Alt hotkey to alter keypoint positive and negative labels.

Notes for AdvancedSAM

  • Please watch this video first

  • For the best experience, follow the video tutorial above and uncheck 'Auto accept annotation suggestions' when running predictions.

  • After generating the prediction from an assortment of inputs, make sure you click the checkmark that is outside of the image to finalize the region (this should either be above or below the image. Watch the video for a visual guide).

  • There may be a checkmark inside the image next to a generated prediction, but do not use that one.

    For some reason, the checkmark that is not on the image itself cleans the other input prompts used for generating the region, and only leaves the predicted region after being clicked (this is the most compatible way to use the backend).

  • You may run into problems creating instances of the same class if you click the checkmark on the image and it leaves the labels used to guide the region.

  • After labeling your object, select the label in the menu and select the type of brush label you would like to give it at the top of your label keys below your image. This allows you to change the class of your prediction. See the video for a better explanation.

  • Only the negative keypoints can be used for subtracting from prediction areas for the model. Positive keypoints and rectangles tell the model areas of interest to make positive predictions.

  • Multiple keypoints may be used to provide areas for the model where predictions should be extended. Only one rectangle label may be used when generating a prediction as an area where the model prediction should occur/be extended.

    If you place multiple rectangle labels, the model will use the newest rectangle label along with all other keypoints when aiding the model prediction.

Notes for ONNX

  • The ONNX model uses the orig_img_size in onnx_converter.py that defines an image ratio for the ONNX model. Change this to the ratio of the images that you are labeling before generating the model. If you are labeling images of different sizes, use Advanced SAM instead, or generate a new ONNX model for different image groups with different sizes. If you do not adjust orig_img_size, and your image aspect ratios do not match what is already defined, then your predictions will be offset from the image. If using docker compose to launch the model, be sure to rebuild the host container.
  • Make sure you adjust orig_img_size BEFORE generating the ONNX model when using onnx_converter.py
  • Guide on changing the code - "orig_im_size": torch.tensor([#heightofimages, #widthofimages], dtype=torch.float),

Notes for exporting

  • COCO and YOLO format is not supported (this project exports using brush labels, so try NumPy or PNG export instead)

Labeling configs

When using the AdvancedSAM

  • Give one brush label per class you want to annotate.
  • Hold the Alt hotkey to create negative keypoints.
  • Add one rectangle label for each of your classes that you want to annotate.
  • The video reviews these points as well if you are confused after reading this.

Base example:

<View>
<Style>
  .main {
    font-family: Arial, sans-serif;
    background-color: #f5f5f5;
    margin: 0;
    padding: 40px 5px 5px 5px;
  }
  .container {
    display: flex;
    justify-content: space-between;
    margin-bottom: 20px;
  }
  .column {
    flex: 1;
    padding: 10px;
  	margin: 5px; 
    background-color: #fff;
    border-radius: 5px;
    box-shadow: 0 2px 5px rgba(0, 0, 0, 0.1);
    text-align: center;
  }
  .column .title {
    margin: 0;
    color: #333;
  }
  .column .label {
    margin-top: 10px;
    padding: 10px;
    padding-bottom: 7px; 
    background-color: #f9f9f9;
    border-radius: 3px;
  }
  .lsf-labels {
    margin: 5px 0 0 0; 
  }
  .image-container {
    width: 100%;
    height: 300px;
    background-color: #ddd;
    border-radius: 5px;
  }
</Style>
  
<View className="main">
  <View className="container">
    <View className="column">
      <HyperText value="" name="h1" className="help" inline="true">
        Brush for manual labeling
      </HyperText>
      <View className="label">        
        <BrushLabels name="tag" toName="image">
          <Label value="Foreground" background="#FF0000" />
          <Label value="Background" background="#0d14d3" />
        </BrushLabels>
      </View>
    </View>
    
    <View className="column">
      <HyperText value="" name="h2" className="help" inline="true">
        <span title="1. Click purple auto Keypoints/Rectangle icon on toolbar. 2. Click Foreground/Background label here">
          Keypoints for auto-labeling
        </span>
      </HyperText>
      <View className="label">
        <KeyPointLabels name="tag2" toName="image" smart="true">
          <Label value="Foreground" smart="true" background="#FFaa00" showInline="true" />
          <Label value="Background" smart="true" background="#00aaFF" showInline="true" />
        </KeyPointLabels>
      </View>
    </View>
    
    <View className="column">
      <HyperText value="" name="h3" className="help" inline="true">
        <span title="1. Click purple auto Keypoints/Rectangle icon on toolbar. 2. Click Foreground/Background label here">
          Rectangles for auto-labeling
        </span>
      </HyperText>
      <View className="label">
        <RectangleLabels name="tag3" toName="image" smart="true">
          <Label value="Foreground" background="#FF00FF" showInline="true" />
          <Label value="Background" background="#00FF00" showInline="true" />
        </RectangleLabels>
      </View>
    </View>
    
  </View>
  
  <View className="image-container">
    <Image name="image" value="$image" zoom="true" zoomControl="true" />
  </View>
  
</View>
</View>

When using the ONNX model

Label values for the keypoints, rectangle, and brush labels must correspond. Other than that, make sure that smart="True" for each keypoint label and rectangle label.

For the ONNX model:

<View>
  <Image name="image" value="$image" zoom="true"/>
  <BrushLabels name="tag" toName="image">
  	<Label value="Banana" background="#FF0000"/>
  	<Label value="Orange" background="#0d14d3"/>
  </BrushLabels>
  <KeyPointLabels name="tag2" toName="image" smart="true">
    <Label value="Banana" smart="true" background="#000000" showInline="true"/>
    <Label value="Orange" smart="true" background="#000000" showInline="true"/>
  </KeyPointLabels>
  <RectangleLabels name="tag3" toName="image" smart="true">
    <Label value="Banana" background="#000000" showInline="true"/>
    <Label value="Orange" background="#000000" showInline="true"/>
  </RectangleLabels>
</View>

Credits

Original Segment Anything Model paper-

@article{kirillov2023segany,
  title={Segment Anything},
  author={Kirillov, Alexander and Mintun, Eric and Ravi, Nikhila and Mao, Hanzi and Rolland, Chloe and Gustafson, Laura and Xiao, Tete and Whitehead, Spencer and Berg, Alexander C. and Lo, Wan-Yen and Doll{\'a}r, Piotr and Girshick, Ross},
  journal={arXiv:2304.02643},
  year={2023}
}

MobileSAM paper-

@article{mobile_sam,
  title={Faster Segment Anything: Towards Lightweight SAM for Mobile Applications},
  author={Zhang, Chaoning and Han, Dongshen and Qiao, Yu and Kim, Jung Uk and Bae, Sung-Ho and Lee, Seungkyu and Hong, Choong Seon},
  journal={arXiv preprint arXiv:2306.14289},
  year={2023}
}