Seeking code review for best practices article on using NimBLE

[frankcohen]

I am seeking your review, criticism, and feedback for the code I wrote below. My intention is to write a tutorial article for Reddit showing best practices for people needing NimBLE for their ESP32 projects. I will publish under a free GPL v3 license. I want to avoid using Static variables, I want the workflow of the code to be obvious, and I want the code to avoid out-of-memory and other exceptions. Please let me know how to improve this. Thanks. -Frank

The use case is a mobile entertainment experience. Two or more ESP32-S3 devices communicate over BLE. There is no declared server or client between then - each may be a server and a client at the same time.

Here is the code for BLE.h:

#ifndef _BLE_
#define _BLE_

#include "Arduino.h"
#include <WiFi.h>

#include "config.h"
#include "secrets.h"

#include <NimBLEDevice.h>

class BLE
{
  public:
    BLE();
    void begin();
    void loop();
    String getMessage();
    void setMessage( String heading );
    String getMessageWithCounter();
    bool connectToServer();
    bool getServerValue();

  private:
    std::string devname;
    int msgCounter;
    unsigned long serverWaitTime;
    unsigned long clientWaitTime;
    String message;
    NimBLECharacteristic* pHeadingCharacteristic;
    NimBLEServer* pServer;
    NimBLEClient* pClient;
};

#endif // _BLE_

Here is the code for BLE.cpp:

/*
 Reflections, distributed entertainment device

 Repository is at https://github.com/frankcohen/ReflectionsOS
 Includes board wiring directions, server side components, examples, support

 Licensed under GPL v3 Open Source Software
 (c) Frank Cohen, All rights reserved. [email protected]
 Read the license in the license.txt file that comes with this code.

 I originally tried using the ESP32 blue BLE library. I ran out of memory. Switched to
 NimBLE-Arduino, an Arduino fork of Apache NimBLE, a replacement open-source BLE library
 https://github.com/h2zero/NimBLE-Arduino
 https://www.arduino.cc/reference/en/libraries/nimble-arduino/
 https://h2zero.github.io/esp-nimble-cpp/md__migration_guide.html#autotoc_md46

Todo:
Make this work among multiple Reflections devices
Balance the active scanning for battery life

*/

#include "BLE.h"

BLE::BLE(){}

static String devicename;
static int nextState;
static uint32_t scanTime = 0; /** 0 = scan forever */
static NimBLEAdvertisedDevice* advDevice;

String BLE::getMessage()
{
  return message;
}

void BLE::setMessage( String _message )
{
  message = _message;
}

String BLE::getMessageWithCounter()
{
  String myc = String( msgCounter++ ) + message;
  std::string mys = myc.c_str();
  return myc;
}

/** Callback to process the results of the last scan or restart it */
void scanEndedCB(NimBLEScanResults results){
    Serial.println("Scan Ended");
}

/**
 * Scan for BLE servers and find the first one that advertises the service we are looking for.
 */
class MyAdvertisedDeviceCallbacks: public BLEAdvertisedDeviceCallbacks {
 /**
   * Called for each advertising BLE server.
   */
   
  void onResult(BLEAdvertisedDevice* advertisedDevice) 
  {
    BLEUUID serviceUUID( SERVICE_UUID_CALLIOPE );

    // See if the device contains the service we are looking for
    if ( advertisedDevice -> haveServiceUUID() && advertisedDevice -> isAdvertisingService( serviceUUID ) )
    {
      Serial.print( devicename );
      Serial.print( ": BLE Advertised Device found: ");
      Serial.print( advertisedDevice->toString().c_str() );
      Serial.print( ", RSSI = " );
      Serial.println( advertisedDevice -> getRSSI() );

      BLEDevice::getScan()->stop();
      advDevice = advertisedDevice;
      nextState = 1;   // Next-up, connect to the server
    }
  }
};

class ServerCallbacks: public NimBLEServerCallbacks {

    void onConnect(NimBLEServer* pServer) 
    {
      Serial.print( devicename );
      Serial.println(": Server connected");
      NimBLEDevice::startAdvertising();
    };

    void onDisconnect(NimBLEServer* pServer) 
    {
      Serial.print( devicename );
      Serial.println(": Client disconnected, starting advertising");
      NimBLEDevice::startAdvertising();
    };

    void onMTUChange(uint16_t MTU, ble_gap_conn_desc* desc) {
      Serial.print( devicename );
      Serial.printf(": BLE MTU updated: %u for connection ID: %u\n", MTU, desc->conn_handle);
    };
};

class MyClientCallback: public BLEClientCallbacks {
  
  void onConnect(BLEClient* pclient) 
  {
    Serial.print( devicename );
    Serial.println(": onConnect");
  }

  void onDisconnect(BLEClient* pclient) 
  {
    nextState = 1;
    Serial.print( devicename );
    Serial.println(": onDisconnect");
  }

};

/**  None of these are required as they will be handled by the library with defaults. **
 **                       Remove as you see fit for your needs                        */
class ClientCallbacks: public NimBLEClientCallbacks {
    void onConnect(NimBLEClient* pClient) 
    {
      Serial.print( devicename );
      Serial.println(": Client callback reports connected");

      /** After connection we should change the parameters if we don't need fast response times.
        *  These settings are 150ms interval, 0 latency, 450ms timout.
        *  Timeout should be a multiple of the interval, minimum is 100ms.
        *  I find a multiple of 3-5 * the interval works best for quick response/reconnect.
        *  Min interval: 120 * 1.25ms = 150, Max interval: 120 * 1.25ms = 150, 0 latency, 60 * 10ms = 600ms timeout
        */
      pClient->updateConnParams(120,120,0,60);
    };

    void onDisconnect(NimBLEClient* pClient) 
    {
      Serial.print(pClient->getPeerAddress().toString().c_str());
      Serial.print( devicename );
      Serial.println(": Client callback reports disconnected");
      NimBLEDevice::getScan()->start(scanTime, scanEndedCB);
    };

    /** Called when the peripheral requests a change to the connection parameters.
     *  Return true to accept and apply them or false to reject and keep
     *  the currently used parameters. Default will return true.
     */
    bool onConnParamsUpdateRequest(NimBLEClient* pClient, const ble_gap_upd_params* params) {
        if(params->itvl_min < 24) { /** 1.25ms units */
            return false;
        } else if(params->itvl_max > 40) { /** 1.25ms units */
            return false;
        } else if(params->latency > 2) { /** Number of intervals allowed to skip */
            return false;
        } else if(params->supervision_timeout > 100) { /** 10ms units */
            return false;
        }

        return true;
    };

    /********************* Security handled here **********************
    ****** Note: these are the same return values as defaults ********/
    uint32_t onPassKeyRequest(){
        Serial.println("Client Passkey Request");
        /** return the passkey to send to the server */
        return 123456;
    };

    bool onConfirmPIN(uint32_t pass_key){
        Serial.print("The passkey YES/NO number: ");
        Serial.println(pass_key);
    /** Return false if passkeys don't match. */
        return true;
    };

    /** Pairing process complete, we can check the results in ble_gap_conn_desc */
    void onAuthenticationComplete(ble_gap_conn_desc* desc){
        if(!desc->sec_state.encrypted) {
            Serial.println("Encrypt connection failed - disconnecting");
            /** Find the client with the connection handle provided in desc */
            NimBLEDevice::getClientByID(desc->conn_handle)->disconnect();
            return;
        }
    };
};

/** Handler class for server characteristic actions */

class CharacteristicCallbacks: public NimBLECharacteristicCallbacks {
    void onRead(NimBLECharacteristic* pCharacteristic){
      Serial.print( devicename );
      Serial.print(": onRead BLE server ");
      Serial.print(pCharacteristic->getUUID().toString().c_str());
      Serial.print(": onRead(), value: ");
      Serial.println(pCharacteristic->getValue().c_str());
    };

    void onWrite(NimBLECharacteristic* pCharacteristic) {
      Serial.print( devicename );
      Serial.print( ": onWrite ");
      Serial.print(pCharacteristic->getUUID().toString().c_str());
      Serial.print(": onWrite(), value: ");
      Serial.println(pCharacteristic->getValue().c_str());
    };
    /** Called before notification or indication is sent,
     *  the value can be changed here before sending if desired.
     */
    void onNotify(NimBLECharacteristic* pCharacteristic) {
      Serial.print( devicename );
      Serial.println(": Sending notification to clients");
    };

    /** The status returned in status is defined in NimBLECharacteristic.h.
     *  The value returned in code is the NimBLE host return code.
     */
    void onStatus(NimBLECharacteristic* pCharacteristic, Status status, int code) {
      String str = ("Notification/Indication status code: ");
      str += status;
      str += ", return code: ";
      str += code;
      str += ", ";
      str += NimBLEUtils::returnCodeToString(code);

      Serial.print( devicename );
      Serial.print( ": ");
      Serial.println(str);
    };

    void onSubscribe(NimBLECharacteristic* pCharacteristic, ble_gap_conn_desc* desc, uint16_t subValue) {
        String str = "Client ID: ";
        str += desc->conn_handle;
        str += " Address: ";
        str += std::string(NimBLEAddress(desc->peer_ota_addr)).c_str();
        if(subValue == 0) {
            str += " Unsubscribed to ";
        }else if(subValue == 1) {
            str += " Subscribed to notfications for ";
        } else if(subValue == 2) {
            str += " Subscribed to indications for ";
        } else if(subValue == 3) {
            str += " Subscribed to notifications and indications for ";
        }
        str += std::string(pCharacteristic->getUUID()).c_str();

        Serial.println(str);
    };
};

/** Notification / Indication receiving handler callback */

void notifyCB(NimBLERemoteCharacteristic* pRemoteCharacteristic, uint8_t* pData, size_t length, bool isNotify){
    std::string str = (isNotify == true) ? "Notification" : "Indication";
    str += " from ";
    /** NimBLEAddress and NimBLEUUID have std::string operators */
    str += std::string(pRemoteCharacteristic->getRemoteService()->getClient()->getPeerAddress());
    str += ": Service = " + std::string(pRemoteCharacteristic->getRemoteService()->getUUID());
    str += ", Characteristic = " + std::string(pRemoteCharacteristic->getUUID());
    str += ", Value = " + std::string((char*)pData, length);
    Serial.println(str.c_str());
}

/** Create a single global instance of the callback class to be used by all clients */
static ClientCallbacks clientCB;


bool BLE::connectToServer() 
{
  if ( pClient == nullptr )
  {
    if( NimBLEDevice::getClientListSize() >= NIMBLE_MAX_CONNECTIONS ) 
    {
      Serial.println("Max clients reached - no more connections available");
      return false;
    }

    pClient = NimBLEDevice::createClient();
    if ( ! pClient )
    {
      Serial.print( devicename );
      Serial.println(": Failed to create client");
      return false;
    }

    pClient->setClientCallbacks(&clientCB, false);

    Serial.print( devicename );
    Serial.println(": New client created");

    /** Set initial connection parameters: These settings are 15ms interval, 0 latency, 120ms timout.
      *  These settings are safe for 3 clients to connect reliably, can go faster if you have less
      *  connections. Timeout should be a multiple of the interval, minimum is 100ms.
      *  Min interval: 12 * 1.25ms = 15, Max interval: 12 * 1.25ms = 15, 0 latency, 51 * 10ms = 510ms timeout
      */

    pClient->setConnectionParams(12,12,0,51);
    /** Set how long we are willing to wait for the connection to complete (seconds), default is 30. */
    pClient->setConnectTimeout(15);
  }

  if ( ! pClient -> isConnected() ) 
  {
    Serial.print( devicename );
    Serial.println(": Not yet connected");

    if ( ! pClient -> connect( advDevice ) ) 
    {
      /** Created a client but failed to connect, don't need to keep it as it has no data */
      NimBLEDevice::deleteClient(pClient);
      Serial.print( devicename );
      Serial.println(": Failed to connect");
      return false;
    }
    else
    {
      Serial.print( devicename );
      Serial.println(": Client connecteed successfully to advertised service");
    }
  }
  else
  {
    Serial.print( devicename );
    Serial.println(": Client already connected");
  }

  Serial.print( devicename );
  Serial.print(": Connected to: ");
  Serial.print(pClient->getPeerAddress().toString().c_str());
  Serial.print(", RSSI: ");
  Serial.println( pClient -> getRssi() );

  /** Now we can read/write/subscribe the charateristics of the services we are interested in */
  NimBLERemoteDescriptor* pDsc = nullptr;
  NimBLERemoteService* pSvc;
  NimBLERemoteCharacteristic* pChr;

  BLEUUID serviceUUID( SERVICE_UUID_CALLIOPE );
  BLEUUID charUUID( CHARACTERISTIC_UUID_HEADING );

  pSvc = pClient->getService( serviceUUID );
  if( pSvc )
  {
    pChr = pSvc->getCharacteristic( charUUID );

    if( pChr ) 
    {
      if( pChr -> canRead() )
      {
        Serial.print( devicename );
        Serial.print( ": " );
        Serial.print(pChr->getUUID().toString().c_str());
        Serial.print(" reports value: ");
        Serial.println(pChr->readValue().c_str());
      }

      /** registerForNotify() has been deprecated and replaced with subscribe() / unsubscribe().
        *  Subscribe parameter defaults are: notifications=true, notifyCallback=nullptr, response=false.
        *  Unsubscribe parameter defaults are: response=false.
        */
      if( pChr -> canNotify() )
      {
        if( !pChr -> subscribe( true, notifyCB ) )
        {
          Serial.print( devicename );
          Serial.print( ": subscribe failed" );

          pClient->disconnect();
          return false;
        }
      }        
      else if( pChr -> canIndicate() )
      {
        /** Send false as first argument to subscribe to indications instead of notifications */
        if( !pChr -> subscribe(false, notifyCB) ) 
        {
          Serial.print( devicename );
          Serial.print( ": subscribe failed on canIndicate" );

          pClient->disconnect();
          return false;
        }
      }
    }
  } 
  else
  {
    Serial.print( devicename );
    Serial.println(": Service not found.");
  }

  Serial.print( devicename );
  Serial.println(": Connected" );
  return true;
}

bool BLE::getServerValue()
{
  BLEUUID serviceUUID( SERVICE_UUID_CALLIOPE );
  BLEUUID charUUID( CHARACTERISTIC_UUID_HEADING );

  if ( pClient == nullptr )
  {
    Serial.print( devicename );
    Serial.print( ": getServerValue pClient is null" );
  }
  else
  {
    NimBLERemoteService* pSvc2 = pClient -> getService( serviceUUID );
    if ( pSvc2 )
    {
      NimBLERemoteCharacteristic* pChr2 = pSvc2->getCharacteristic( charUUID );

      if( pChr2 ) 
      {
        if( pChr2 -> canRead() )
        {
          Serial.print( devicename );
          Serial.print( ": service " );
          Serial.print( pChr2 -> getUUID().toString().c_str() );
          Serial.print(" reports value: " );
          Serial.println( pChr2 -> readValue().c_str() );
          return true;
        }
        else
        {
          Serial.print( devicename );
          Serial.print( ": GetServerValue ! canRead()" );
          return false;
        }
      }
      else
      {
        Serial.print( devicename );
        Serial.print( ": pChr2 null" );
        return false;
      }
    }
    else
    {
      Serial.print( devicename );
      Serial.print( ": pSvc2 null" );
        return false;
    }
  }
  return true;
}

static CharacteristicCallbacks chrCallbacks;

void BLE::begin()
{
  devname = "CALLIOPE-";
  std::string mac = WiFi.macAddress().c_str();
  devname.append( mac.substr( 15, 2 ) );
  NimBLEDevice::init( devname );

  devicename = devname.c_str();

  advDevice = nullptr;
  pClient = nullptr;

  nextState = 0;
  msgCounter = 0;
  clientWaitTime = millis();
  serverWaitTime = millis();

  // Server set-up

  pServer = NimBLEDevice::createServer();
  pServer->setCallbacks( new ServerCallbacks() );

  NimBLEService* pService = pServer -> createService( SERVICE_UUID_CALLIOPE );

  pHeadingCharacteristic = pService -> createCharacteristic( CHARACTERISTIC_UUID_HEADING, NIMBLE_PROPERTY::READ );
  pHeadingCharacteristic -> setCallbacks( &chrCallbacks );

  pHeadingCharacteristic -> setValue( getMessageWithCounter() );

  pService->start();

  NimBLEAdvertising* pAdvertising = NimBLEDevice::getAdvertising();
  pAdvertising -> addServiceUUID( pService -> getUUID() );
  pAdvertising->setScanResponse(true);
  pAdvertising->setMinPreferred(0x06);  // functions that help with iPhone connections issue
  pAdvertising->setMaxPreferred(0x12);

  NimBLEDevice::startAdvertising();

  Serial.print( devicename );
  Serial.println(": Server advertising started");

  // Client set-up

  // Retrieve a Scanner and set the callback we want to use to be informed when we
  // have detected a new device.  Specify that we want active scanning and start the
  // scan to run for 5 seconds.
  BLEScan* pBLEScan = BLEDevice::getScan();
  pBLEScan -> setAdvertisedDeviceCallbacks( new MyAdvertisedDeviceCallbacks() );
  pBLEScan -> setInterval(1349);
  pBLEScan -> setWindow(449);
  pBLEScan -> setActiveScan(true);
  pBLEScan -> start(5, false);
}

void BLE::loop()
{
  // Server
  if ((millis() - serverWaitTime) > 5000)
  {
    serverWaitTime = millis();

    String myc = String( msgCounter++ ) + message;
    std::string mys = myc.c_str();
    pHeadingCharacteristic->setValue( mys );
  }

  // Client

  if ((millis() - clientWaitTime) > 5000)
  {
    clientWaitTime = millis();

    if ( nextState == 1 )
    {
      if ( connectToServer() )
      {
        nextState = 2;
      }
      else
      {
        nextState = 1;
      }
    }

    if ( nextState == 2 )
    {
      if ( getServerValue() )
      {
        nextState = 2;
      }
      else
      {
        nextState = 1;
      }
    }
  }
}

[frankcohen]

Ping

[frankcohen]

I posted a tutorial article on using Arduino and Bluetooth Low Energy (BLE) on ESP32 as server and client combined, using Apache NimBLE. I include my notes and example source code. Glad for your feedback and upvotes. https://www.reddit.com/r/arduino/comments/158bd4j/arduino_and_ble_on_esp32_as_server_and_client/