int-send_sms.php

<?php
/*
* Requirements: your PHP installation needs cUrl support, which not all PHP installations
* include by default.
*
* Simply substitute your own username, password and phone number
* below, and run the test code:
*/
//$username = 'KushalNaresh';
//$password = 'kush@123';
/*
* Your phone number, including country code, i.e. +44123123123 in this case:
*/
//$msisdn = '+94768526186';

/*
* Please see the FAQ regarding HTTPS (port 443) and HTTP (port 80/5567)
*/
//$url = 'https://bulksms.vsms.net/eapi/submission/send_sms/2/2.0';

/*
* A 7-bit GSM SMS message can contain up to 160 characters (longer messages can be
* achieved using concatenation).
*
* All non-alphanumeric 7-bit GSM characters are included in this example. Note that Greek characters,
* and extended GSM characters (e.g. the caret "^"), may not be supported
* to all networks. Please let us know if you require support for any characters that
* do not appear to work to your network.
*/
//$seven_bit_msg = "Test message: all non-alphanumeric GSM characters: $@!\"#%&,;:<>¡£¤¥§¿ÄÅÆÇÉÑÖØÜßàèéùìòå¿äöñüà\nGreek: ΩΘΔΦΓΛΩΠΨΣΘΞ";

/*
* A Unicode SMS can contain only 70 characters. Any Unicode character can be sent,
* including those GSM and accented ISO-8859 European characters that are not
* catered for by the GSM character set, but note that mobile phones are only able
* to display certain Unicode characters, based on their geographic market.
* Nonetheless, every mobile phone should be able to display at least the text
* "Unicode test message:" from the test message below. Your browser may be able to
* display more of the characters than your phone. The text of the message below is:
*/
//$unicode_msg = "Unicode test message: ☺ \nArabic: شصض\nChinese: 本网";

/*
* There are a number of 8 bit messages that one can send to a handset, the most popular of the lot is Service Indication(Wap Push).
* Some other popular ones are vCards and vCalendars, headers may vary depending on which of message one opts to send.
* The User Data Header(UDH) is solely responsible for determining which
* type of messages will be sent to one's handset.
* In a nutshell, SI(service indication) messages will have, in the final message body, both the UDH
* and WSP(Wireless Session Protocol) appended to each other forming a prefix of the ASCII string of the Hex value
* of the actual content. For example, suppose our intended Wap message body is as follows:
*
* <si><indication href="http://www.bulksms.com">Visit BulkSMS.com homepage</indication></si>
*
* Our headers will be -- UDH + WSP = FINAL_HEADER
* '0605040B8423F0' + 'DC0601AE' = '0605040B8423F0DC0601AE'
*
* The UDH contains a destination port(0B84) and the origin port(23F0)
* the WSP is broken down into the following:
*
* DC - Transaction ID (used to associate PDUs)
* 06 - PDU type (push PDU)
* 01 - HeadersLen (total of content-type and headers, i.e. zero headers)
* AE - Content Type: application/vnd.wap.sic
*
* For this example our 8 bit message(what becomes our Wap Push) will look like this:
* $msg = '0605040B8423F0DC0601AE02056a0045c60d0362756c6b736d732e636f6d00010356697369742042756c6b534d532e636f6d20686f6d6570616765000101';
*
* You will only get UDH for both vCard and vCalendar type of 8 bit messages and no WSP, which will look something to this effect:
* '06050423F4000'
*
* In order to convert an xml document into its binary representation (wbxml), one would need to install a wbxml library (libwbxml)
* Once that has been successfully achieved, that binary representation will then be finally converted into its hexadecimal value
* in order to complete the transaction. With that done, the appropriate headers are then appended to this hex string to complete
* the Wap Push/8-bit messaging
*
* $eight_bit_msg = get_headers( $msg_type ) . xml_to_wbxml( $msg_body );
* get_headers(...) function commented out. uncomment when you use it.
* $msg_type = 'wap_push';
* $msg_body = '<si><indication href="http://www.bulksms.com">Visit BulkSMS.com homepage</indication></si>';
*/
//$eight_bit_msg = '0605040B8423F0DC0601AE02056a0045c60d0362756c6b736d732e636f6d00010356697369742042756c6b534d532e636f6d20686f6d6570616765000101';


/*
* These error codes will be retried if encountered. For your final application,
* you may wish to include statuses such as "25: You do not have sufficient credits"
* in this list, and notify yourself upon such errors. However, if you are writing a
* simple application which does no queueing (e.g. a Web page where a user simply
* POSTs a form back to the page that will send the message), then you should not
* add anything to this list (perhaps even removing the item below), and rather just
* display an error to your user immediately.
*/
$transient_errors = array(
40 => 1 # Temporarily unavailable
);

/*
* Sending 7-bit message
*/
/*$post_body = seven_bit_sms( $username, $password, $seven_bit_msg, $msisdn );
$result = send_message( $post_body, $url );
if( $result['success'] ) {
  print_ln( formatted_server_response( $result ) );
}
else {
  print_ln( formatted_server_response( $result ) );
}
*/
/*
* Sending unicode message
*/
//$post_body = unicode_sms( $username, $password, $unicode_msg, $msisdn );
//$result = send_message( $post_body, $url );
if( $result['success'] ) {
  print_ln( formatted_server_response( $result ) );
}
else {
  print_ln( formatted_server_response( $result ) );
}

/*
* Sending 8-bit message
*/
/*$post_body = eight_bit_sms( $username, $password, $eight_bit_msg, $msisdn );
$result = send_message( $post_body, $url );
if( $result['success'] ) {
  print_ln( formatted_server_response( $result ) );
}
else {
  print_ln( formatted_server_response( $result ) );
}
*/

/*
* If you don't see this, and no errors appeared to screen, you should
* check your Web server's error logs for error output:
*/
print_ln("Script ran to completion");

function print_ln($content) {
  if (isset($_SERVER["SERVER_NAME"])) {
    print $content."<br />";
  }
  else {
    print $content."\n";
  }
}

function formatted_server_response( $result ) {
  $this_result = "";

  if ($result['success']) {
    $this_result .= "Success: batch ID " .$result['api_batch_id']. "API message: ".$result['api_message']. "\nFull details " .$result['details'];
  }
  else {
    $this_result .= "Fatal error: HTTP status " .$result['http_status_code']. ", API status " .$result['api_status_code']. " API message " .$result['api_message']. " full details " .$result['details'];

    if ($result['transient_error']) {
      $this_result .=  "This is a transient error - you should retry it in a production environment";
    }
  }
  return $this_result;
}

function send_message ( $post_body, $url ) {
  /*
  * Do not supply $post_fields directly as an argument to CURLOPT_POSTFIELDS,
  * despite what the PHP documentation suggests: cUrl will turn it into in a
  * multipart formpost, which is not supported:
  */

  $ch = curl_init( );
  curl_setopt ( $ch, CURLOPT_URL, $url );
  curl_setopt ( $ch, CURLOPT_POST, 1 );
  curl_setopt ( $ch, CURLOPT_RETURNTRANSFER, 1 );
  curl_setopt ( $ch, CURLOPT_POSTFIELDS, $post_body );
  // Allowing cUrl funtions 20 second to execute
  curl_setopt ( $ch, CURLOPT_TIMEOUT, 20 );
  // Waiting 20 seconds while trying to connect
  curl_setopt ( $ch, CURLOPT_CONNECTTIMEOUT, 20 );

  $response_string = curl_exec( $ch );
  $curl_info = curl_getinfo( $ch );

  $sms_result = array();
  $sms_result['success'] = 0;
  $sms_result['details'] = '';
  $sms_result['transient_error'] = 0;
  $sms_result['http_status_code'] = $curl_info['http_code'];
  $sms_result['api_status_code'] = '';
  $sms_result['api_message'] = '';
  $sms_result['api_batch_id'] = '';

  if ( $response_string == FALSE ) {
    $sms_result['details'] .= "cURL error: " . curl_error( $ch ) . "\n";
  } elseif ( $curl_info[ 'http_code' ] != 200 ) {
    $sms_result['transient_error'] = 1;
    $sms_result['details'] .= "Error: non-200 HTTP status code: " . $curl_info[ 'http_code' ] . "\n";
  }
  else {
    $sms_result['details'] .= "Response from server: $response_string\n";
    $api_result = explode( '|', $response_string );
    $status_code = $api_result[0];
    $sms_result['api_status_code'] = $status_code;
    $sms_result['api_message'] = $api_result[1];
    if ( count( $api_result ) != 3 ) {
      $sms_result['details'] .= "Error: could not parse valid return data from server.\n" . count( $api_result );
    } else {
      if ($status_code == '0') {
        $sms_result['success'] = 1;
        $sms_result['api_batch_id'] = $api_result[2];
        $sms_result['details'] .= "Message sent - batch ID $api_result[2]\n";
      }
      else if ($status_code == '1') {
        # Success: scheduled for later sending.
        $sms_result['success'] = 1;
        $sms_result['api_batch_id'] = $api_result[2];
      }
      else {
        $sms_result['details'] .= "Error sending: status code [$api_result[0]] description [$api_result[1]]\n";
      }





    }
  }
  curl_close( $ch );

  return $sms_result;
}

function seven_bit_sms ( $username, $password, $message, $msisdn ) {
  $post_fields = array (
  'username' => $username,
  'password' => $password,
  'message'  => character_resolve( $message ),
  'msisdn'   => $msisdn,
  'allow_concat_text_sms' => 0, # Change to 1 to enable long messages
  'concat_text_sms_max_parts' => 2
  );

  return make_post_body($post_fields);
}

function unicode_sms ( $username, $password, $message, $msisdn ) {
  $post_fields = array (
  'username' => $username,
  'password' => $password,
  'message'  => string_to_utf16_hex( $message ),
  'msisdn'   => $msisdn,
  'dca'      => '16bit'
  );

  return make_post_body($post_fields);
}
/*
function get_headers ( $msg_type ) {
if( $msg_type == 'wap_push' ) {
$udh = '0605040B8423F0';
$wsp = 'DC0601AE';

return $udh . $wsp;
}
else if( $msg_type == 'vCard' || $msg_type == 'vCalendar' ) {
return '06050423F40000';
}
}
*/
function eight_bit_sms( $username, $password, $message, $msisdn ) {
  $post_fields = array (
  'username' => $username,
  'password' => $password,
  'message'  => $message,
  'msisdn'   => $msisdn,
  'dca'      => '8bit'
  );

  return make_post_body($post_fields);

}

function make_post_body($post_fields) {
  $stop_dup_id = make_stop_dup_id();
  if ($stop_dup_id > 0) {
    $post_fields['stop_dup_id'] = make_stop_dup_id();
  }
  $post_body = '';
  foreach( $post_fields as $key => $value ) {
    $post_body .= urlencode( $key ).'='.urlencode( $value ).'&';
  }
  $post_body = rtrim( $post_body,'&' );

  return $post_body;
}

function character_resolve($body) {
  $special_chrs = array(
  'Δ'=>'0xD0', 'Φ'=>'0xDE', 'Γ'=>'0xAC', 'Λ'=>'0xC2', 'Ω'=>'0xDB',
  'Π'=>'0xBA', 'Ψ'=>'0xDD', 'Σ'=>'0xCA', 'Θ'=>'0xD4', 'Ξ'=>'0xB1',
  '¡'=>'0xA1', '£'=>'0xA3', '¤'=>'0xA4', '¥'=>'0xA5', '§'=>'0xA7',
  '¿'=>'0xBF', 'Ä'=>'0xC4', 'Å'=>'0xC5', 'Æ'=>'0xC6', 'Ç'=>'0xC7',
  'É'=>'0xC9', 'Ñ'=>'0xD1', 'Ö'=>'0xD6', 'Ø'=>'0xD8', 'Ü'=>'0xDC',
  'ß'=>'0xDF', 'à'=>'0xE0', 'ä'=>'0xE4', 'å'=>'0xE5', 'æ'=>'0xE6',
  'è'=>'0xE8', 'é'=>'0xE9', 'ì'=>'0xEC', 'ñ'=>'0xF1', 'ò'=>'0xF2',
  'ö'=>'0xF6', 'ø'=>'0xF8', 'ù'=>'0xF9', 'ü'=>'0xFC',
  );

  $ret_msg = '';
  if( mb_detect_encoding($body, 'UTF-8') != 'UTF-8' ) {
    $body = utf8_encode($body);
  }
  for ( $i = 0; $i < mb_strlen( $body, 'UTF-8' ); $i++ ) {
    $c = mb_substr( $body, $i, 1, 'UTF-8' );
    if( isset( $special_chrs[ $c ] ) ) {
      $ret_msg .= chr( $special_chrs[ $c ] );
    }
    else {
      $ret_msg .= $c;
    }
  }
  return $ret_msg;
}

/*
* Unique ID to eliminate duplicates in case of network timeouts - see
* EAPI documentation for more. You may want to use a database primary
* key. Warning: sending two different messages with the same
* ID will result in the second being ignored!
*
* Don't use a timestamp - for instance, your application may be able
* to generate multiple messages with the same ID within a second, or
* part thereof.
*
* You can't simply use an incrementing counter, if there's a chance that
* the counter will be reset.
*/
function make_stop_dup_id() {
  return 0;
}

function string_to_utf16_hex( $string ) {
  return bin2hex(mb_convert_encoding($string, "UTF-16", "UTF-8"));
}

function xml_to_wbxml( $msg_body ) {

  $wbxmlfile = 'xml2wbxml_'.md5(uniqid(time())).'.wbxml';
  $xmlfile = 'xml2wbxml_'.md5(uniqid(time())).'.xml';

  //create temp file
  $fp = fopen($xmlfile, 'w+');

  fwrite($fp, $msg_body);
  fclose($fp);

  //convert temp file
  exec(xml2wbxml.' -v 1.2 -o '.$wbxmlfile.' '.$xmlfile.' 2>/dev/null');
  if(!file_exists($wbxmlfile)) {
    print_ln('Fatal error: xml2wbxml conversion failed');
    return false;
  }

  $wbxml = trim(file_get_contents($wbxmlfile));

  //remove temp files
  unlink($xmlfile);
  unlink($wbxmlfile);
  return $wbxml;
}
?>