Home Assistant OS 12.4.rc1

[sairon]

Known Issues

⚠️ Some Raspberry Pi users have reported system lockups with some Z-Wave and Zigbee USB adapters. This is an unresolved bug in the Raspberry Pi kernel, workaround is to use the DWC2 driver by adding dtoverlay=dwc2 to config.txt. See #3362 for details.

⚠️ Fujitsu Esprimo Q920 fails to boot with GRUB bootloader distributed in this OS release, updating to 12.4.rc1 may cause a boot failure and manual intervention, see #3348 for details

Home Assistant Operating System

• Bump Docker to v26.1.4 (Bump Docker to v26.1.4 #3411) @sairon
• Update Buildroot to 2024.02.3 (Update Buildroot to 2024.02.3 #3406) @sairon

Build System

• Use Genimage for declarative image layout (Use Genimage for declarative image layout #3388) @sairon
• Bump docker/build-push-action from 5.3.0 to 5.4.0 (Bump docker/build-push-action from 5.3.0 to 5.4.0 #3405) @dependabot
• Bump docker/login-action from 3.1.0 to 3.2.0 (Bump docker/login-action from 3.1.0 to 3.2.0 #3399) @dependabot

Raspberry Pi

• Set tty0 in cmdline as the default preferred console (Set tty0 in cmdline as the default preferred console #3402) @sairon
• RaspberryPi: Update kernel to 6.6.31 - stable_20240529 (RaspberryPi: Update kernel to 6.6.31 - stable_20240529 #3400) @sairon

Home Assistant Yellow

• Set tty0 in cmdline as the default preferred console (Set tty0 in cmdline as the default preferred console #3402) @sairon
• RaspberryPi: Update kernel to 6.6.31 - stable_20240529 (RaspberryPi: Update kernel to 6.6.31 - stable_20240529 #3400) @sairon
• Linux: Update kernel to 6.6.32 (Linux: Update kernel to 6.6.32 #3394) @sairon

Home Assistant Green

• Linux: Update kernel to 6.6.33 (Linux: Update kernel to 6.6.33 #3415) @sairon
• Fix writing to eMMC in U-Boot on Green (Fix writing to eMMC in U-Boot on Green #3412) @sairon
• Set tty0 in cmdline as the default preferred console (Set tty0 in cmdline as the default preferred console #3402) @sairon
• Use U-Boot tarball for all boards (Use U-Boot tarball for all boards #3361) @sairon

Open Virtual Appliance

• Linux: Update kernel to 6.6.33 (Linux: Update kernel to 6.6.33 #3415) @sairon
• Set tty0 in cmdline as the default preferred console (Set tty0 in cmdline as the default preferred console #3402) @sairon
• Bump buildroot to update openvmtools to 12.3.0 (again) (Bump buildroot to update openvmtools to 12.3.0 (again) #3370) @sairon

Generic x86-64

• Linux: Update kernel to 6.6.33 (Linux: Update kernel to 6.6.33 #3415) @sairon
• Set tty0 in cmdline as the default preferred console (Set tty0 in cmdline as the default preferred console #3402) @sairon

Hardkernel ODROID

• Linux: Update kernel to 6.6.33 (Linux: Update kernel to 6.6.33 #3415) @sairon
• Temporary revert ODROID-N2 U-Boot to 2023.01 to fix eMMC issues (Temporary revert ODROID-N2 U-Boot to 2023.01 to fix eMMC issues #3409) @sairon
• Set tty0 in cmdline as the default preferred console (Set tty0 in cmdline as the default preferred console #3402) @sairon
• Use U-Boot tarball for all boards (Use U-Boot tarball for all boards #3361) @sairon

ASUS Tinker

• Linux: Update kernel to 6.6.33 (Linux: Update kernel to 6.6.33 #3415) @sairon
• Set tty0 in cmdline as the default preferred console (Set tty0 in cmdline as the default preferred console #3402) @sairon

Khadas VIM Series

• Linux: Update kernel to 6.6.33 (Linux: Update kernel to 6.6.33 #3415) @sairon
• Set tty0 in cmdline as the default preferred console (Set tty0 in cmdline as the default preferred console #3402) @sairon

Generic aarch64

• Linux: Update kernel to 6.6.33 (Linux: Update kernel to 6.6.33 #3415) @sairon
• Set tty0 in cmdline as the default preferred console (Set tty0 in cmdline as the default preferred console #3402) @sairon

---

This discussion was created from the release Home Assistant OS 12.4.rc1.