bulb status on homekit

[maxknopp]

I have RGB zigbee bulb.
I can set on/off and change RGB color from Homekit, it works.
These bulb can also be power on/off by the wall physical switch.

the issue are:

• when the bulb is power off from the wall switch, it is marked as unavailable in zigbee2mqtt, but it status remains "on" on homebridge and on homekit.
• when the bulb is "on", in zigbee2mqtt i can get the bulb RGB value, but in homekit i could not get the actual RGB value of the light

Is there any configuration for that or that feature need to be added?

[maxknopp]

as comment, in the homebridge log i can see that, in cas of update it received the RGB information:

Jan 12 15:41:57 homebridge npm[1094]: [2025-01-12 15:41:57] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/lit Théotime', payload '{"brightness":171,"color":{"hue":0,"saturation":100,"x":0.7006,"y":0.2993},"color_mode":"hs","color_temp":160,"last_seen":"2025-01-12T14:41:57.642Z","linkquality":75,"state":"ON"}'

and in case if the bulb is switch off from physical wall switch:

Jan 12 15:45:50 homebridge npm[1094]: [2025-01-12 15:45:50] warning: z2m: Failed to ping 'couloir côté salon' (attempt 2/2, ZCL command 0x980c33fffee29c0a/1 genBasic.read(["zclVersion"], {"timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"reservedBits":0,"writeUndiv":false}) failed (Data request failed with error: 'MAC no ack' (233)))
Jan 12 15:45:50 homebridge npm[1094]: [2025-01-12 15:45:50] debug: z2m: Active device 'couloir côté salon' was last seen '10.38' minutes ago.
Jan 12 15:45:50 homebridge npm[1094]: [2025-01-12 15:45:50] info: z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/couloir côté salon/availability', payload 'offline'