device_nightly_init.sh

#!/bin/bash

#Set the config variables
DATE=$(date +"%m-%d-%Y")
DEVICE=$"Device you are going to compile for"
PACKAGE=$"kernel_$DATE.zip" #this is the name of the zip 

#Announce the beginning of nightlies.
ttytter -status="Nightlies for $DEVICE have started, stay tuned"

#cd to kernel soure path, assuming your kernel soure dir is named src.
cd ~/src

#get anykernel files
git clone https://github.com/koush/AnyKernel.git

#if you are devving for the thunderbolt, use this anykernel instead of the preceding version....NOTE: you need to comment out lines 10 and 11 and uncomment lines 14 for this next command to work.
#git clone https://github.com/jdkoreclipse/AnyKernel.git
 
#self explanitory....this does not chnge.
make clean

#defconfig for your device.
make device_defconfig

#your exports (this line doesnt change unless you are using a custom toolchain).
export CCOMPILER=${HOME}/android/system/prebuilt/linux-x86/toolchain/arm-eabi-4.4.0/bin/arm-eabi-

#delete any files left in /build dir of kernel src
rm ~/src/AnyKernel/zImage
rm  ~/src/AnyKernel/system/lib/modules/bcm4329.ko

#evo specific files
#rm ~/src/AnyKernel/system/lib/modules/sequans_sdio.ko
#rm ~/src/AnyKernel/system/lib/modules/wimaxdbg.ko
#rm ~/src/AnyKernel/system/lib/modules/wimaxuart.ko

#make the build.
make ARCH=arm CROSS_COMPILE=$CCOMPILER -j`grep 'processor' /proc/cpuinfo | wc -l`

#move all the compiled files to the /build dir of your kernel source. NOTE: you must incude the META-INF from an anykernel in the /build dir.
cp ~/src/arch/arm/boot/zImage ~/src/AnyKernel/zImage
cp ~/src/drivers/net/wireless/bcm4329/bcm4329.ko  ~/src/AnyKernel/system/lib/modules/bcm4329.ko

#these files are evo-specific
#cp ~/src/drivers/net/wimax/SQN/sequans_sdio.ko ~/src/AnyKernel/system/lib/modules/sequans_sdio.ko
#cp ~/src/drivers/net/wimax/wimaxdbg/wimaxdbg.ko ~/src/AnyKernel/system/lib/modules/wimaxdbg.ko
#cp ~/src/drivers/net/wimax/wimaxuart/wimaxuart.ko ~/src/AnyKernel/system/lib/modules/wimaxuart.ko

#go to your AnyKernel dir
cd AnyKernel

#zip the kernel up 
zip -r $PACKAGE system zImage META-INF 

#Upload file to FTP
ftp -n -v yourftpsite.com << EOT
ascii
user yourusername yourpassword
prompt
cd remote/dir/you/wnt/to upload/your/kernel/to
lcd ~/local/dir/your/kernel/zip/is 
put $PACKAGE
EOT

#Announce new Nightly build.
ttytter -status="New $DEVICE nightly available (insert link here)!"

#Obviously
exit