Go to https://github.com/metomi/fcm/milestones?state=closed for a full listing of issues for each release.
FCM release 42.
#256: fcm make: build: correctly support Fortran submodule. A submodule depends on its parent module at compile time, but a parent module depends on its submodules at link time. This change also ensures that other modern syntax used in module/submodule definitions are handled correctly.
FCM release 41.
#253: fcm make: build: fix handling of Fortran program unit tail comment. Fortran dependency analysis was not handling tail comment of a program unit correctly. This change fixes the issue.
FCM release 40.
#247:
fcm make: build: partially revert #245
so the link task will, as before, create a temporary dependent object library
before linking the main object to it. However, users can now specify the
build.prop{link-without-ar} setting in the configuration to prevent it from
creating the temporary dependent object library, and put the full list of
dependent object files in the linker command line instead.
FCM release 39.
#246:
fcm make: new description setting to allow users to specify any string to
describe the current make.
#245:
fcm make: build: a link task for creating an executable will no longer create
an archive library with the ar command before calling the linker. The linker
command will contain the full list of object files instead.
FCM release 38.
#243:
fcm switch: fix Perl warning. This happened on an unexpected usage. A user has
checked out an entire project tree, and then run fcm switch trunk on it.
Clearly it did not work, but the added Perl warning was not helpful either.
FCM release 37.
#241: fcm branch-delete: fix Perl warning on branches in a Rosie repository.
#240:
fcm make: fix implementation of build.prop{ignore-missing-dep-ns}.
FCM release 36.
#239: fcm conflicts: handle tree conflict: local file edit, incoming file replace upon merge.
#238:
fcm make: use TMPDIR (if defined in the environment) for temporary files on
load/dump of ctx.gz, instead of /tmp/.
FCM release 35. Minor bug fix, and minor update to admin utilities.
#235:
fcm make: build: fix sprintf redundant argument warning on Perl 5.22+.
FCM release 34. Minor update to admin utilities, nothing noteworthy for users.
FCM release 33. Minor bug fix and update.
#229:
fcm commit, branch-create, branch-delete, etc: the default graphical editor for
commit message is modified from gedit to gvim -f, as gedit is not
reliable for running in the foreground.
#227:
fcm make: on gunzip of the context file, pass a file handle rather than a path
to the gunzip function to work around problems when files are made read-only
via ACL.
FCM release 32. Minor bug fix and update.
#222:
Configuration file: fix variable substitution of value 0. A (environment)
variable value of 0 was previously lost on substitution. This fixes the
problem.
#219: fcm make: extract: fix target status on conflict. On conflict, the target status was recorded incorrectly as unchanged. This caused incremental extracts to succeed in error. This change fixes the problem.
#215: Improvements to version related functionality:
- fcm version: now displays FCM_HOME location.
- fcm make: new
require-version=MIN-VERSION [MAX-VERSION]declaration. If this declaration is specified and the current version is belowMIN-VERSIONor if aMAX-VERSIONis specified and the current version is above it, the command will fail immediately.
FCM release 31. Minor update.
#214:
fcm make: build.prop declarations: modifiers such as dep.include, dep.o,
no-dep.include and no-dep.o are now supported with namespaces that are
target names.
FCM release 30. Minor update.
#208: fcm make: build: now recognises more patterns as indicators of the existence of a main program in a C source file.
#207: fcm test-battery: now runs correctly in the absence of site/user configuration on recent Ubuntu distros.
FCM release 29. Minor update.
#205:
fcm make: build: new setting build.prop{checksum-method}=md5|sha1|... allows
users to choose MD5 or one of SHA algorithms in Perls' Digest::SHA to
calculate the checksums of source and target files.
#204:
fcm branch-create: allow --bob as a synonym of --branch-of-branch.
FCM release 28. Minor update to admin utilities, nothing noteworthy for users.
FCM release 27. Minor update to admin utilities, nothing noteworthy for users.
FCM release 26.
#197: fcm make: build: fix target select modifier.
- The
categorymodifier should now work. - The
nsmodifier never worked, and is removed. Insteadtaskandcategoryselection can now be filtered by name-space.
#196: pre/post commit: improve changeset size diagnostic
- pre-commit: log (but don't email) >1MB transactions
- post-commit: report pre-commit size threshold (normally 10MB) for any >1MB changesets
#192: Primary location keyword: trailing slashes in values of primary location keywords will now removed automatically.
#191:
fcm (branch-)diff --graphical: will now use the option
--config-option config:working-copy:exclusive-locking-clients= to prevent the
client from being locked.
FCM release 25.
#188:
fcm make: allow multiple runs in same directory. A make can now be named, so
multiple non-overlapping makes can work in the same directory. It is worth
noting that once you have used this version of fcm make on a directory, older
version of FCM will no longer work in incremental mode on the same directory.
See also metomi/rose#1604.
#190:
fcm make: new --archive option. If archive mode is specified, TAR-GZIP these
items by default:
.fcm-make/cache/extract/build/include/build/o/
where extract and build are names of extract and build steps.
Users can configure what to TAR-GZIP under build/.
#189: fcm make: correctly support relocation of a make.
FCM release 24.
#183: Use of Subversion 1.6 with FCM is no longer recommended.
#181: fcm make: source file find: ignore hidden paths only if paths are under the source root directory, i.e. it is now OK for the source root directory to be a hidden path itself.
#178:
fcm make: .fcm-make/log symbolic links are now relative. This should make it
easier to relocate a build.
FCM release 23.
#176:
fcm make: build: fix creation of Fortran interface files where procedure
arguments declared with EXTERNAL statements were incorrectly matched in
case-sensitive mode.
#170: fcm commit: now works in a working copy with externals.
#169: fcm branch-delete: now fails if bad arguments specified.
#168:
fcm branch-diff: --trac now works correctly. The /intertrac/ syntax did not
appear to work any more. Use /search?q= syntax instead.
FCM release 22.
#164: fcm build: fix fortran interface generation, broken by #156.
#163:
fcm merge --reverse: improve logic. It now works with non-standard layout. The
--revision=[M:]N option is no longer compulsory. It now uses the last changed
revision of the working copy by default.
#162:
fcm-manage-trac-env-session: fix session logic. If a user already has some
entries in the session_attribute table, the old logic will not insert a new
name or email for the user. The new logic will only skip the name or
email attribute if already set correctly.
FCM release 21.
#161: post-commit-bg-notify-who: use branch creator as branch owner if it cannot be determined by the branch name.
#159,
#160:
FCM's Subversion wrappers: display error messages when svn info commands
fail.
#158: fcm make: extract: improve checking of primary location in inherited mode. Compare old value with normalised version of new value. E.g. use of location keywords and extra slashes at the end of the path will no longer result in a configuration conflict.
#156: fcm extract and fcm build: fix warnings from Perl 5.12+ when parsing configuration file.
#155: fcm make: fix report of no such config file.
#150: fcm-manage-trac-env-session: improve removal logic.
#149: svnperms.py: fix bug, alter message override, and add tests.
#148:
Reverse commit.conf logic. To verify branch owner, specify
verify-branch-owner. To notify branch owner, specify notify-owner.
post-commit-bg now supports owner notification on trunk commit.
#147:
Use dd conv=fsync to create backup and dump to ensure that backup and dump
data is written to disk before returning a good status.
#146:
fcm merge: basic support for meld.
FCM release 20.
#138: fcm make: build: continue on failure.
- The build system will continue as much as possible after a failure, and only repeat failed tasks in incremental modes.
- This change also fixes a problem where the system could lose information after a failure. Tasks that would be run after the failed task would not get their context recorded correctly. In a subsequent incremental build, the system would end up doing more work than necessary.
#135: fcm make: multiple config files and search paths.
- You can now specify multiple
-F PATHoptions to specify the search paths for locating configuration files specified as relative paths. - You can now specify multiple
-f FILEoptions. - New
include-pathconfiguration declaration for specifying the search path for configuration files specified as relative paths. - Improve CLI argument diagnostics.
- The command dies if an argument is missing an equal sign.
- Suggest command line syntax if argument ends with
.cfg.
#129, #136, #143, #144: Major improvements to the admin sub-system:
- Improve hook installation.
Write, store and housekeep hook logs at
$REPOS/log/. Clean options for hook installation. Installsvnperms.conffrom repository root.TZ=UTCfor all hook scripts. - Improve diagnostics for hooks.
Custom configuations per repositories.
Configurable
pre-revprop-changepermissions. Hooks to work best under Subversion 1.8+. Add modifiedsvnperms.pyin distribution. Trac 0.12+ changeset added and modified notification. - Trac URL template.
fcm-add-trac-env: add Trac comment edit permission.- Separate
InterTracconfigurations fromtrac.iniintointertrac.ini. - Fix usage of
FCM_CONF_PATHfor admin. - Improve documentation and logic for admin configuration.
- Get user info via LDAP or traditional Unix password file.
- New admin commands:
fcm-add-svn-repos-and-trac-envfcm-add-svn-reposfcm-manage-trac-env-session
pre-commit: optionally block branch create with bad owner.post-commit-bg: rename repository dump.post-commit-bg: optionally notify branch owner if author is not owner.post-*hooks: configurable notificationFrom:field.- Test batteries for hooks, and selected admin utilities.
#140: fcm mkpatch: Changes required for use with svn 1.8 + other minor bug fixes.
#139:
fcm commit: fail a commit if it includes the #commit_message# file.
#137:
fcm merge: basic support for kdiff3.
#129:
fcm commit/fcm branch-rm: fix branch owner test to use correct user ID.
-none-
#125: fcm make: build: handle adjacent cyclic dependency correctly.
#128:
Remove unnecessary -r, -w and -x tests to avoid ACL problems.
Use Perl's filetest pragma where necessary to correctly handle ACL.
#114,
#117,
#118:
fcm make: build: now recognises statements with Fortran
OpenMP sentinels that affect build dependencies.
These dependencies are normally ignored.
However, if a relevant build.prop{fc.flag-omp} property is specified, the
build system will treat these statements as normal dependency statements.
#121:
fcm make: extract via SSH: improve performance by using find -printf
instead of find -exec stat.
#120:
fcm make: build will now correctly handle C source files that has camel
case names and main functions.
#111: fcm make: build in inherit mode: fix incorrect success in repeated incremental mode.
#105:
FCM_CONF_PATH: new environment variable that can be used to override
site/user configuration paths.
#103: fcm make: extract: detect diff trees that are the same as the base tree.
#96:
fcm make: arguments as extra configurations. This change allows the
fcm make command to accept command line arguments. Each argument will be
appended in order as a new line in the current fcm-make.cfg. This allows
users to override the configuration on the command line.
#101:
fcm make: do not inherit steps if it is already set in the current
configuration. This allows steps= to be declared before use=.
#100:
fcm make: reduce memory usage in incremental mode. Invoking fcm make
with many steps was causing Perl to exit with SIGSEGV previously.
#98: fcm make: extract: fix ssh location efficiency.
#93:
fcm make: fix use= properties override. This change allows use=
declarations to be placed anywhere in an fcm-make.cfg without interfering
other *.prop declarations.
#92:
fcm branch-create/list: support alternate username using information in
users' ~/.subversion/servers file.
#91: fcm make: remove config-on-success on failure.
#83: fcm make: build: an initial attempt to support some Fortran 2K features.
- Recognise
iso_fortran_envas an intrinsic module. - Recognise
use, intrinsic ::statements. - Recognise
class,double complexandprocedureas types. - Recognise new type declaration attributes.
- Recognise
abstract interfaceblocks. - Recognise
impure elementalas a valid function or subroutine attribute. - Recognise
submoduleblocks.
#89:
fcm merge, fcm switch, etc: Subversion 1.8 svn upgrade command may
not write a .svn/entries file at the working copy root. Several FCM wrappers
were failing because they were unable to determine the working copy root. This
is fixed by using the new entry available in Subversion 1.8 svn info to
determine the working copy root.
#87:
fcm make: build: print sources to targets diagnostics on -vv mode and
in the log.
-none-
#81: fcm make: build: fix cyclic dependency logic.
#80:
fcm make: extract: support extract.location declarations reset.
#79: fcm make: extract: SSH location: ignore dot files.
-none-
#77:
fcm make: mirror and build: fix etc files install. This was broken by
#65
which causes etc files to be installed to bin/.
#74:
Handle date in svn log --xml, which may have trailing spaces and lines.
#65:
fcm make: support declaration of class default properties using the
syntax e.g. build.prop{class,fc}=my-fc.
#65:
fcm make: build: support target name as name-space for target properties,
e.g. build.prop{fc}[myprog.exe]=my-fc. N.B. Dependency properties are
regarded as source properties, and so are not supported by this change.
#73:
fcm mkpatch: use /usr/bin/env bash in generated scripts.
#72: fcm conflicts: fix incompatibility with SVN 1.8.
#70: fcm CLI: support new SVN 1.8 commands.
#68: sbin/fcm-backup-*: hotcopy before verifying the hotcopy.
#63: fcm make: log file improvements. Print FCM version in beginning of log file.
#63: fcm --version: new command to print FCM version.
#63:
FCM is no longer dependent on the HTTP::Date Perl module.
Changes that have significant impact on user experience.
#52: fcm make: build: new properties for C++ source files, separated from C source files. File extension for C and C++ source files is rationalised to follow what is documented in the GCC manual.
#50, #54: fcm make: build/preprocess.prop: include-paths/lib-paths/libs: New build properties to specify a list of include paths for compile tasks, and library paths and libraries for link tasks.
Bug fixes and minor enhancements:
#59:
fcm make: fix invalid cyclic dependency error when build.prop{dep.o} is
declared on the root name-space.
#58:
fcm make: build: improve diagnostics for duplicated targets and bad values
in build.prop{ns-dep.o} declarations.
#55:
fcm make: extract: can now extract from a location that is accessible via
ssh and rsync.
#53:
fcm make: .fcm-make/log can now be accessed as fcm-make.log.
#51: FCM documentation: style updated using Bootstrap.
Changes that have significant impact on user experience.
-None-
Bug fixes and minor enhancements:
#45: An attempt to allow FCM to work under a case insensitive file system.
#39, #40, #41: CM commands are now tested under Subversion 1.8.
#37:
fcm make: build: fixed hanging of ext-iface tasks when there is an
unbalanced quote or bracket in a relevant Fortran source file.
#20: fcm make: build: allow separate linker command and add ability to keep the intermediate library archive while linking an executable.
#19: added test suite for code management commands to the distribution.
r4955: fcm extract: fix failure caused by the checking of latest version of a deleted branch.