Makefile

##############################################################################
# NOTE: Make sure you have `pyenv` installed beforehand
# https://github.com/pyenv/pyenv
#
# On a Mac: $ brew install pyenv

##############################################################################
# Make file tutorials: https://makefiletutorial.com/#getting-started
##############################################################################
# Default shell that make will use.
SHELL=/bin/bash


##############################################################################
PYTHON_VERSION=3.8.13
VENV_NAME := $(shell [ -d venv ] && echo venv || echo .venv)
VENV_DIR=${VENV_NAME}
PYTHON=${VENV_DIR}/bin/python
RSTCHECK=${VENV_DIR}/bin/rstcheck
SPHINX_AUTOBUILD=${VENV_DIR}/bin/sphinx-autobuild
SPHINX_BUILD=${VENV_DIR}/bin/sphinx-build
##############################################################################

##############################################################################
# Terminal Colors:
# to see all colors, run
# bash -c 'for c in {0..255}; do tput setaf $c; tput setaf $c | cat -v; echo =$c; done'
# the first 15 entries are the 8-bit colors

# define standard colors
ifneq (,$(findstring xterm,${TERM}))
	BOLD         := $(shell tput -Txterm bold)
	UNDERLINE    := $(shell tput -Txterm smul)
	STANDOUT     := $(shell tput -Txterm smso)
	BLACK        := $(shell tput -Txterm setaf 0)
	RED          := $(shell tput -Txterm setaf 1)
	GREEN        := $(shell tput -Txterm setaf 2)
	YELLOW       := $(shell tput -Txterm setaf 3)
	BLUE         := $(shell tput -Txterm setaf 4)
	PURPLE       := $(shell tput -Txterm setaf 5)
	CYAN         := $(shell tput -Txterm setaf 6)
	WHITE        := $(shell tput -Txterm setaf 7)
	NORMAL := $(shell tput -Txterm sgr0)
else
	BOLD         := ""
	UNDERLINE    := ""
	STANDOUT     := ""
	BLACK        := ""
	RED          := ""
	GREEN        := ""
	YELLOW       := ""
	BLUE         := ""
	PURPLE       := ""
	CYAN         := ""
	WHITE        := ""
	NORMAL       := ""
endif

##############################################################################
# Makefile TARGETS:
##############################################################################
.PHONY: help helper-line clean venv install install-e install-dev post-install-info lint check fix test test-with-html-report docs docs-serve build
.DEFAULT_GOAL := help

##############################################################################
# Auto document targets by adding comment next to target name
# starting with double pound and space like "## doc text"
##############################################################################
helper-line:
	@echo "${BOLD}${BLUE}--------------------------------------------------${NORMAL}"

help: ## Show help documentation.
	@make helper-line
	@echo "${BOLD}${BLUE}Here are all the targets available with make command.${NORMAL}"
	@make helper-line
	@echo ""
	@echo "Start by running ${YELLOW}'make clean install'${NORMAL}"
	@echo ""
	@grep -E '^[a-zA-Z_0-9%-]+:.*?## .*$$' $(MAKEFILE_LIST) | awk 'BEGIN {FS = ":.*?## "}; {printf "    ${YELLOW}%-30s${NORMAL} %s\n", $$1, $$2}'

##############################################################################

clean: ## Clean .venv, dist, build
	@echo ""
	@echo "${YELLOW}Removing virtual environment ${NORMAL}"
	@make helper-line
	-rm .python-version

	@echo ""
	@echo "${YELLOW}Remove temp files${NORMAL}"
	@make helper-line
	-rm -rf $(VENV_DIR)
	-rm -rf dist/*
	-rm -rf build/*
	-rm -rf dbx.egg-info/*



	@echo ""
	@echo "${YELLOW}Current python:${NORMAL}"
	@make helper-line
	@python --version

	@make docs-clean

##############################################################################
# This chaining exists so that the virtual env target will not be invoked multiple times.
# This config works because there is a file at this path "$(VENV_NAME)/bin/activate"
# Once that file is created, it will not be change unless you run "make clean".
# If the file did not change, then the target below with same name will be skipped.
venv: $(VENV_NAME)/bin/activate

$(VENV_NAME)/bin/activate:
	@echo ""
	@echo "${YELLOW}Init pyenv${NORMAL}"
	@make helper-line
	pyenv install -s ${PYTHON_VERSION}
	pyenv local ${PYTHON_VERSION}

	@echo ""
	@echo "${YELLOW}Current python:${NORMAL}"
	@make helper-line
	@python --version

	@echo ""
	@echo "${YELLOW}Init venv in ${VENV_DIR}${NORMAL}"
	@make helper-line
	test -d $(VENV_NAME) || python -m venv $(VENV_NAME)

	@echo ""
	@echo "${YELLOW}Using ${PYTHON}${NORMAL}"
	@make helper-line
	$(PYTHON) --version
	$(PYTHON) -m pip install --upgrade pip


##############################################################################

install: venv install-e install-dev post-install-info ## >>> MAIN TARGET. Run this to start. <<<

install-e: ## Install project as editable.
	@echo ""
	@echo "${YELLOW}Install project as editable${NORMAL}"
	@make helper-line
	$(PYTHON) -m pip install -e .

install-dev: ## Install dev dependencies.
	@echo ""
	@echo "${YELLOW}Install Dev dependencies.${NORMAL}"
	@make helper-line
	$(PYTHON) -m pip install -e ".[dev]"
	pre-commit install

post-install-info: ## Just some post installation info.
	@echo ""
	@echo "${YELLOW}Post-Install Info:${NORMAL}"
	@make helper-line
	@echo "See what other make targets are available by running:"
	@echo "    ${YELLOW}'make'${NORMAL}"
	@echo "    ${YELLOW}'make help'${NORMAL}"
	@echo ""
	@echo "${YELLOW}NOTE${NORMAL}: Most of the time, you should be using the predefined make targets."
	@echo ""
	@echo "${YELLOW}Optionally${NORMAL}: If you really need to, you can activate the venv in your"
	@echo "terminal shell by running: "
	@echo "    ${YELLOW}'source .venv/bin/activate'${NORMAL}"
	@echo ""
	@echo "This will put any executable python tools installed above in the PATH, allowing you"
	@echo "to run the tools from the shell if you really need to."
	@echo "    ex: ${YELLOW}'pytest'${NORMAL}"


##############################################################################

lint: ## Run the lint and checks
	@echo ""
	@echo "${YELLOW}Linting code:${NORMAL}"
	@make helper-line
	$(PYTHON) -m prospector --profile prospector.yaml
	$(RSTCHECK) README.rst
	@make check

check: ## Run black checks
	@echo ""
	@echo "${YELLOW}Check code with black:${NORMAL}"
	@make helper-line
	$(PYTHON) -m black --check .

fix: ## fix the code with black formatter.
	@echo ""
	@echo "${YELLOW}Fixing code with black:${NORMAL}"
	@make helper-line
	$(PYTHON) -m black .

##############################################################################

test: ## Run the tests. (option): file=tests/path/to/file.py
	@echo ""
	@echo "${YELLOW}Running tests:${NORMAL}"
	@make helper-line
	$(PYTHON) -m pytest -vv --cov dbx $(file) -n auto

test-with-html-report: ## Run all tests with html reporter.
	@echo ""
	@echo "${YELLOW}Testing with html report:${NORMAL}"
	@make helper-line
	$(PYTHON) -m pytest --cov dbx -n auto --cov-report html -s

##############################################################################

DOCS_SOURCE=./docs/source
DOCS_BUILD=./docs/build

docs-clean: ## Clean the docs build folder
	@echo ""
	@echo "${YELLOW}Clean ${DOCS_BUILD} folder:${NORMAL}"
	@make helper-line
	-rm -rf ${DOCS_BUILD}/*

docs-serve: ## sphinx autobuild & serve docs on localhost
	mkdocs serve

##############################################################################

build: ## Build the package.
	@echo ""
	@echo "${YELLOW}Building the project:${NORMAL}"
	@make helper-line
	rm -rf dist/*
	rm -rf build/*
	$(PYTHON) setup.py clean bdist_wheel