Contains firmware to run the ESPEC BTL433 Chmaber
- Pressurize the tank to 18 psi using an air pump
- Fill in the tank (5% Distilled water)
- Connect the appropriate tubing
- Turn the pump on using the toggle switch on top
The chamber can handle 2 different modes. Firstly the static mode where you can just assign specific temperature and humidities for it to aim for. Secondly a programmable mode where we can program it to got to different climatic conditions at given time stamps dynamicallly.
** FYI: Make sure humidity mode is enabled if planning on working with assigned humidities.
Check logs to examine what needs to be put on influx - How can I carefully control the chamber to achive the walk in Temperature and Humidity space