ESP32_S3 debugging program doesn't start

[Sandoun]

Target name(s)

ESP32_S3

Firmware version

1.12.3.114

Was working before? On which version?

No response

Device capabilities

System Information
HAL build info: nanoCLR running @ ESP32_S3 built with ESP-IDF v5.2.3
Target: ESP32_S3
Platform: ESP32

Firmware build Info:
Date: Feb 21 2025
Type: MinSizeRel build, chip rev. >= 0, support for PSRAM
CLR Version: 1.12.3.114
Compiler: GNU ARM GCC v13.2.0

OEM Product codes (vendor, model, SKU): 0, 0, 0

Serial Numbers (module, system):
00000000000000000000000000000000
1000000000E4B323E13CF8

Target capabilities:
Has nanoBooter: NO
IFU capable: NO
Has proprietary bootloader: YES

AppDomains:

Assemblies:
WaterIO.Firmware, 1.0.0.0
mscorlib, 1.16.11.0

Native Assemblies:
mscorlib v100.5.0.22, checksum 0xE76AC236
nanoFramework.Runtime.Native v100.0.10.0, checksum 0x0EAE898B
nanoFramework.Hardware.Esp32 v100.0.10.0, checksum 0x6A20A689
nanoFramework.Hardware.Esp32.Rmt v100.0.5.0, checksum 0xB97BFDE3
nanoFramework.Graphics v100.0.0.10, checksum 0x6A3F90DD
nanoFramework.Networking.Sntp v100.0.4.4, checksum 0xE2D9BDED
nanoFramework.ResourceManager v100.0.0.1, checksum 0xDCD7DF4D
nanoFramework.System.Collections v100.0.2.0, checksum 0x40DC251F
nanoFramework.System.Text v100.0.0.1, checksum 0x8E6EB73D
nanoFramework.System.IO.Hashing v100.0.0.1, checksum 0xEBD8ED20
nanoFramework.System.Security.Cryptography v100.0.0.3, checksum 0x343142CA
nanoFramework.Runtime.Events v100.0.8.0, checksum 0x0EAB00C9
EventSink v1.0.0.0, checksum 0xF32F4C3E
System.IO.FileSystem v1.1.0.4, checksum 0x1777E2FE
System.Math v100.0.5.5, checksum 0x9F9E2A7E
System.Net v100.2.0.11, checksum 0xD82C1452
System.Device.Adc v100.0.0.0, checksum 0xE5B80F0B
System.Device.Gpio v100.1.0.6, checksum 0x097E7BC5
System.Device.I2c v100.0.0.2, checksum 0xFA806D33
System.Device.I2c.Slave v1.0.0.0, checksum 0x4238164B
System.Device.I2s v100.0.0.1, checksum 0x478490FE
System.Device.Pwm v100.1.0.4, checksum 0xABF532C3
System.IO.Ports v100.1.6.1, checksum 0xB798CE30
System.Device.Spi v100.1.2.0, checksum 0x3F6E2A7E
System.Runtime.Serialization v100.0.0.0, checksum 0x0A066871
System.Device.Wifi v100.0.6.4, checksum 0x00A058C6

++++++++++++++++++++++++++++++++
++ Memory Map ++
++++++++++++++++++++++++++++++++
Type Start Size
++++++++++++++++++++++++++++++++
RAM 0x3fcb8e78 0x0001f008
FLASH 0x00000000 0x00800000

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++ Flash Sector Map ++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Region Start Blocks Bytes/Block Usage
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
0 0x00010000 1 0x1A0000 nanoCLR
1 0x001B0000 1 0x2E0000 Deployment
2 0x00490000 1 0x200000 Configuration

+++++++++++++++++++++++++++++++++++++++++++++++++++
++ Storage Usage Map ++
+++++++++++++++++++++++++++++++++++++++++++++++++++
Start Size (kB) Usage
+++++++++++++++++++++++++++++++++++++++++++++++++++
0x00490000 0x200000 (2048kB) Configuration
0x00010000 0x1A0000 (1664kB) nanoCLR
0x001B0000 0x2E0000 (2944kB) Deployment

Deployment Map
Empty

Description

When uploading the default example project via VS2022, the CLR doesn't seem to execute the program, it just waits for the program to start. When the ESP gets rebooted, the previously uploaded program gets executed. This was tested by attaching a serial monitor and also running a minimal led blink program and observing, that the led wont blink when uploading from VS22 but after a ESP reboot it works.

How to reproduce

1. Flash the esp32-s3 firmware
2. Upload the default project

Expected behaviour

The uploaded program should be executed

Screenshots

No response

Aditional information

Example code used:

    public class Program
    {
        public static void Main()
        {

            while (true) {

                Debug.WriteLine("Hello from nanoFramework!");

                Thread.Sleep(1000);

            }  

        }
    }

The esp model used is a 'ESP32-S3-WROOM-1-N8' that works totally fine with all other variants of programming it.