From a99d7d3a3f7f8ae006c20b22d0236f4d372fd040 Mon Sep 17 00:00:00 2001 From: github-actions Date: Thu, 16 Jan 2025 12:18:55 +0000 Subject: [PATCH] Update schematisation checks for threedi-modelchecker 2.16.0 --- .../i_current_schematisation_checks_table.rst | 3584 ++++++++++------- 1 file changed, 2053 insertions(+), 1531 deletions(-) diff --git a/source/i_current_schematisation_checks_table.rst b/source/i_current_schematisation_checks_table.rst index d6802d35..964798ad 100644 --- a/source/i_current_schematisation_checks_table.rst +++ b/source/i_current_schematisation_checks_table.rst @@ -7,2299 +7,2338 @@ - Check message * - 0001 - Error - - v2_1d_boundary_conditions.connection_node_id refers to a non-existing v2_connection_nodes + - boundary_condition_1d.connection_node_id refers to a non-existing connection_node * - 0001 - Error - - v2_1d_lateral.connection_node_id refers to a non-existing v2_connection_nodes + - channel.connection_node_id_end refers to a non-existing connection_node * - 0001 - Error - - v2_aggregation_settings.global_settings_id refers to a non-existing v2_global_settings + - channel.connection_node_id_start refers to a non-existing connection_node * - 0001 - Error - - v2_channel.connection_node_end_id refers to a non-existing v2_connection_nodes + - cross_section_location.channel_id refers to a non-existing channel * - 0001 - Error - - v2_channel.connection_node_start_id refers to a non-existing v2_connection_nodes + - culvert.connection_node_id_end refers to a non-existing connection_node * - 0001 - Error - - v2_control.control_group_id refers to a non-existing v2_control_group + - culvert.connection_node_id_start refers to a non-existing connection_node * - 0001 - Error - - v2_control.measure_group_id refers to a non-existing v2_control_measure_group + - culvert.material_id refers to a non-existing material * - 0001 - Error - - v2_control_measure_map.measure_group_id refers to a non-existing v2_control_measure_group + - dry_weather_flow.dry_weather_flow_distribution_id refers to a non-existing dry_weather_flow_distribution + * - 0001 + - Warning + - dry_weather_flow_map.connection_node_id refers to a non-existing connection_node + * - 0001 + - Warning + - dry_weather_flow_map.dry_weather_flow_id refers to a non-existing dry_weather_flow * - 0001 - Error - - v2_cross_section_location.channel_id refers to a non-existing v2_channel + - exchange_line.channel_id refers to a non-existing channel * - 0001 - Error - - v2_cross_section_location.definition_id refers to a non-existing v2_cross_section_definition + - lateral_1d.connection_node_id refers to a non-existing connection_node * - 0001 - Error - - v2_culvert.connection_node_end_id refers to a non-existing v2_connection_nodes + - measure_location.connection_node_id refers to a non-existing connection_node * - 0001 - Error - - v2_culvert.connection_node_start_id refers to a non-existing v2_connection_nodes + - measure_map.control_id refers to a non-existing memory_control * - 0001 - Error - - v2_culvert.cross_section_definition_id refers to a non-existing v2_cross_section_definition + - measure_map.control_id refers to a non-existing table_control * - 0001 - Error - - v2_exchange_line.channel_id refers to a non-existing v2_channel + - measure_map.measure_location_id refers to a non-existing measure_location * - 0001 - Error - - v2_global_settings.control_group_id refers to a non-existing v2_control_group + - memory_control.target_id refers to a non-existing channel * - 0001 - Error - - v2_global_settings.groundwater_settings_id refers to a non-existing v2_groundwater + - memory_control.target_id refers to a non-existing culvert * - 0001 - Error - - v2_global_settings.interflow_settings_id refers to a non-existing v2_interflow + - memory_control.target_id refers to a non-existing orifice * - 0001 - Error - - v2_global_settings.numerical_settings_id refers to a non-existing v2_numerical_settings + - memory_control.target_id refers to a non-existing pipe * - 0001 - Error - - v2_global_settings.simple_infiltration_settings_id refers to a non-existing v2_simple_infiltration + - memory_control.target_id refers to a non-existing pump * - 0001 - Error - - v2_global_settings.vegetation_drag_settings_id refers to a non-existing v2_vegetation_drag + - memory_control.target_id refers to a non-existing weir * - 0001 - Error - - v2_impervious_surface_map.connection_node_id refers to a non-existing v2_connection_nodes + - orifice.connection_node_id_end refers to a non-existing connection_node * - 0001 - Error - - v2_impervious_surface_map.impervious_surface_id refers to a non-existing v2_impervious_surface + - orifice.connection_node_id_start refers to a non-existing connection_node * - 0001 - Error - - v2_manhole.connection_node_id refers to a non-existing v2_connection_nodes + - orifice.material_id refers to a non-existing material * - 0001 - Error - - v2_orifice.connection_node_end_id refers to a non-existing v2_connection_nodes + - pipe.connection_node_id_end refers to a non-existing connection_node * - 0001 - Error - - v2_orifice.connection_node_start_id refers to a non-existing v2_connection_nodes + - pipe.connection_node_id_start refers to a non-existing connection_node * - 0001 - Error - - v2_orifice.cross_section_definition_id refers to a non-existing v2_cross_section_definition + - pipe.material_id refers to a non-existing material * - 0001 - Error - - v2_pipe.connection_node_end_id refers to a non-existing v2_connection_nodes + - potential_breach.channel_id refers to a non-existing channel * - 0001 - Error - - v2_pipe.connection_node_start_id refers to a non-existing v2_connection_nodes + - pump.connection_node_id refers to a non-existing connection_node * - 0001 - Error - - v2_pipe.cross_section_definition_id refers to a non-existing v2_cross_section_definition + - pump_map.connection_node_id_end refers to a non-existing connection_node * - 0001 - Error - - v2_potential_breach.channel_id refers to a non-existing v2_channel + - pump_map.pump_id refers to a non-existing pump * - 0001 - Error - - v2_pumpstation.connection_node_end_id refers to a non-existing v2_connection_nodes + - surface.surface_parameters_id refers to a non-existing surface_parameters + * - 0001 + - Warning + - surface_map.connection_node_id refers to a non-existing connection_node + * - 0001 + - Warning + - surface_map.surface_id refers to a non-existing surface * - 0001 - Error - - v2_pumpstation.connection_node_start_id refers to a non-existing v2_connection_nodes + - table_control.target_id refers to a non-existing channel * - 0001 - Error - - v2_surface.surface_parameters_id refers to a non-existing v2_surface_parameters + - table_control.target_id refers to a non-existing culvert * - 0001 - Error - - v2_surface_map.connection_node_id refers to a non-existing v2_connection_nodes + - table_control.target_id refers to a non-existing orifice * - 0001 - Error - - v2_weir.connection_node_end_id refers to a non-existing v2_connection_nodes + - table_control.target_id refers to a non-existing pipe * - 0001 - Error - - v2_weir.connection_node_start_id refers to a non-existing v2_connection_nodes + - table_control.target_id refers to a non-existing pump * - 0001 - Error - - v2_weir.cross_section_definition_id refers to a non-existing v2_cross_section_definition + - table_control.target_id refers to a non-existing weir * - 0001 - Error - - v2_windshielding.channel_id refers to a non-existing v2_channel - * - 0002 + - weir.connection_node_id_end refers to a non-existing connection_node + * - 0001 - Error - - v2_1d_boundary_conditions.connection_node_id should be unique - * - 0002 + - weir.connection_node_id_start refers to a non-existing connection_node + * - 0001 - Error - - v2_1d_boundary_conditions.id should be unique - * - 0002 + - weir.material_id refers to a non-existing material + * - 0001 - Error - - v2_1d_lateral.id should be unique + - windshielding_1d.channel_id refers to a non-existing channel * - 0002 - Error - - v2_2d_boundary_conditions.id should be unique + - aggregation_settings.id should be unique * - 0002 - Error - - v2_2d_lateral.id should be unique + - boundary_condition_1d.connection_node_id should be unique * - 0002 - Error - - v2_aggregation_settings.id should be unique + - boundary_condition_1d.id should be unique * - 0002 - Error - - v2_channel.id should be unique + - boundary_condition_2d.id should be unique * - 0002 - Error - - v2_connection_nodes.id should be unique + - channel.id should be unique * - 0002 - Error - - v2_control.id should be unique + - connection_node.id should be unique * - 0002 - Error - - v2_control_delta.id should be unique + - cross_section_location.id should be unique * - 0002 - Error - - v2_control_group.id should be unique + - culvert.id should be unique * - 0002 - Error - - v2_control_measure_group.id should be unique + - dem_average_area.id should be unique * - 0002 - Error - - v2_control_measure_map.id should be unique + - dry_weather_flow.id should be unique * - 0002 - Error - - v2_control_memory.id should be unique + - dry_weather_flow_distribution.id should be unique * - 0002 - Error - - v2_control_pid.id should be unique + - dry_weather_flow_map.id should be unique * - 0002 - Error - - v2_control_table.id should be unique + - exchange_line.id should be unique * - 0002 - Error - - v2_control_timed.id should be unique + - grid_refinement_area.id should be unique * - 0002 - Error - - v2_cross_section_definition.id should be unique + - grid_refinement_line.id should be unique * - 0002 - Error - - v2_cross_section_location.id should be unique + - groundwater.id should be unique * - 0002 - Error - - v2_culvert.id should be unique + - initial_conditions.id should be unique * - 0002 - Error - - v2_dem_average_area.id should be unique + - interception.id should be unique * - 0002 - Error - - v2_exchange_line.id should be unique + - interflow.id should be unique * - 0002 - Error - - v2_floodfill.id should be unique + - lateral_1d.id should be unique * - 0002 - Error - - v2_global_settings.id should be unique + - lateral_2d.id should be unique * - 0002 - Error - - v2_grid_refinement.id should be unique + - material.id should be unique * - 0002 - Error - - v2_grid_refinement_area.id should be unique + - measure_location.id should be unique * - 0002 - Error - - v2_groundwater.id should be unique + - measure_map.id should be unique * - 0002 - Error - - v2_impervious_surface.id should be unique + - memory_control.id should be unique * - 0002 - Error - - v2_impervious_surface_map.id should be unique + - model_settings.id should be unique * - 0002 - Error - - v2_interflow.id should be unique + - numerical_settings.id should be unique * - 0002 - Error - - v2_manhole.connection_node_id should be unique + - obstacle.id should be unique * - 0002 - Error - - v2_manhole.id should be unique + - orifice.id should be unique * - 0002 - Error - - v2_numerical_settings.id should be unique + - physical_settings.id should be unique * - 0002 - Error - - v2_obstacle.id should be unique + - pipe.id should be unique * - 0002 - Error - - v2_orifice.id should be unique + - potential_breach.id should be unique * - 0002 - Error - - v2_pipe.id should be unique + - pump.id should be unique * - 0002 - Error - - v2_potential_breach.id should be unique + - pump_map.id should be unique * - 0002 - Error - - v2_pumpstation.id should be unique + - simple_infiltration.id should be unique * - 0002 - Error - - v2_simple_infiltration.id should be unique + - simulation_template_settings.id should be unique * - 0002 - Error - - v2_surface.id should be unique + - surface.id should be unique * - 0002 - Error - - v2_surface_map.id should be unique + - surface_map.id should be unique * - 0002 - Error - - v2_surface_parameters.id should be unique + - surface_parameters.id should be unique * - 0002 - Error - - v2_vegetation_drag.id should be unique + - table_control.id should be unique * - 0002 - Error - - v2_weir.id should be unique + - tag.id should be unique * - 0002 - Error - - v2_windshielding.id should be unique - * - 0003 - - Error - - v2_1d_boundary_conditions.boundary_type cannot be null - * - 0003 - - Error - - v2_1d_boundary_conditions.connection_node_id cannot be null - * - 0003 + - time_step_settings.id should be unique + * - 0002 - Error - - v2_1d_boundary_conditions.id cannot be null - * - 0003 + - vegetation_drag_2d.id should be unique + * - 0002 - Error - - v2_1d_boundary_conditions.timeseries cannot be null - * - 0003 + - weir.id should be unique + * - 0002 - Error - - v2_1d_lateral.connection_node_id cannot be null + - windshielding_1d.id should be unique * - 0003 - Error - - v2_1d_lateral.id cannot be null + - aggregation_settings.id cannot be null * - 0003 - Error - - v2_1d_lateral.timeseries cannot be null + - boundary_condition_1d.geom cannot be null * - 0003 - Error - - v2_2d_boundary_conditions.boundary_type cannot be null + - boundary_condition_1d.id cannot be null * - 0003 - Error - - v2_2d_boundary_conditions.id cannot be null + - boundary_condition_2d.geom cannot be null * - 0003 - Error - - v2_2d_boundary_conditions.the_geom cannot be null + - boundary_condition_2d.id cannot be null * - 0003 - Error - - v2_2d_boundary_conditions.timeseries cannot be null + - channel.connection_node_id_end cannot be null * - 0003 - Error - - v2_2d_lateral.id cannot be null + - channel.connection_node_id_start cannot be null * - 0003 - Error - - v2_2d_lateral.the_geom cannot be null + - channel.exchange_type cannot be null * - 0003 - Error - - v2_2d_lateral.timeseries cannot be null + - channel.geom cannot be null * - 0003 - Error - - v2_2d_lateral.type cannot be null + - channel.id cannot be null * - 0003 - Error - - v2_aggregation_settings.aggregation_method cannot be null + - connection_node.geom cannot be null * - 0003 - Error - - v2_aggregation_settings.flow_variable cannot be null + - connection_node.id cannot be null * - 0003 - Error - - v2_aggregation_settings.id cannot be null + - cross_section_location.channel_id cannot be null * - 0003 - Error - - v2_aggregation_settings.timestep cannot be null + - cross_section_location.friction_type cannot be null * - 0003 - Error - - v2_aggregation_settings.var_name cannot be null + - cross_section_location.geom cannot be null * - 0003 - Error - - v2_channel.calculation_type cannot be null + - cross_section_location.id cannot be null * - 0003 - Error - - v2_channel.connection_node_end_id cannot be null + - cross_section_location.reference_level cannot be null * - 0003 - Error - - v2_channel.connection_node_start_id cannot be null + - culvert.connection_node_id_end cannot be null * - 0003 - Error - - v2_channel.id cannot be null + - culvert.connection_node_id_start cannot be null * - 0003 - Error - - v2_channel.the_geom cannot be null + - culvert.geom cannot be null * - 0003 - Error - - v2_connection_nodes.id cannot be null + - culvert.id cannot be null * - 0003 - Error - - v2_connection_nodes.the_geom cannot be null + - culvert.invert_level_end cannot be null * - 0003 - Error - - v2_control.control_type cannot be null + - culvert.invert_level_start cannot be null * - 0003 - Error - - v2_control.id cannot be null + - dem_average_area.geom cannot be null * - 0003 - Error - - v2_control_delta.id cannot be null + - dem_average_area.id cannot be null * - 0003 - Error - - v2_control_group.id cannot be null + - dry_weather_flow.geom cannot be null * - 0003 - Error - - v2_control_measure_group.id cannot be null + - dry_weather_flow.id cannot be null * - 0003 - Error - - v2_control_measure_map.id cannot be null + - dry_weather_flow_distribution.id cannot be null * - 0003 - Error - - v2_control_measure_map.object_id cannot be null + - dry_weather_flow_map.geom cannot be null * - 0003 - Error - - v2_control_measure_map.object_type cannot be null + - dry_weather_flow_map.id cannot be null * - 0003 - Error - - v2_control_measure_map.weight cannot be null + - exchange_line.geom cannot be null * - 0003 - Error - - v2_control_memory.action_type cannot be null + - exchange_line.id cannot be null * - 0003 - Error - - v2_control_memory.action_value cannot be null + - grid_refinement_area.geom cannot be null * - 0003 - Error - - v2_control_memory.id cannot be null + - grid_refinement_area.id cannot be null * - 0003 - Error - - v2_control_memory.measure_variable cannot be null + - grid_refinement_line.geom cannot be null * - 0003 - Error - - v2_control_memory.target_id cannot be null + - grid_refinement_line.id cannot be null * - 0003 - Error - - v2_control_memory.target_type cannot be null + - groundwater.id cannot be null * - 0003 - Error - - v2_control_pid.id cannot be null + - initial_conditions.id cannot be null * - 0003 - Error - - v2_control_table.action_table cannot be null + - interception.id cannot be null * - 0003 - Error - - v2_control_table.action_type cannot be null + - interflow.id cannot be null * - 0003 - Error - - v2_control_table.id cannot be null + - lateral_1d.geom cannot be null * - 0003 - Error - - v2_control_table.measure_variable cannot be null + - lateral_1d.id cannot be null * - 0003 - Error - - v2_control_table.target_id cannot be null + - lateral_2d.geom cannot be null * - 0003 - Error - - v2_control_table.target_type cannot be null + - lateral_2d.id cannot be null * - 0003 - Error - - v2_control_timed.action_table cannot be null + - material.id cannot be null * - 0003 - Error - - v2_control_timed.action_type cannot be null + - measure_location.connection_node_id cannot be null * - 0003 - Error - - v2_control_timed.id cannot be null + - measure_location.geom cannot be null * - 0003 - Error - - v2_control_timed.target_id cannot be null + - measure_location.id cannot be null * - 0003 - Error - - v2_control_timed.target_type cannot be null + - measure_location.measure_variable cannot be null * - 0003 - Error - - v2_cross_section_definition.id cannot be null + - measure_map.control_type cannot be null * - 0003 - Error - - v2_cross_section_location.channel_id cannot be null + - measure_map.geom cannot be null * - 0003 - Error - - v2_cross_section_location.definition_id cannot be null + - measure_map.id cannot be null * - 0003 - Error - - v2_cross_section_location.friction_type cannot be null + - measure_map.measure_location_id cannot be null * - 0003 - Error - - v2_cross_section_location.id cannot be null + - measure_map.weight cannot be null * - 0003 - Error - - v2_cross_section_location.reference_level cannot be null + - memory_control.action_type cannot be null * - 0003 - Error - - v2_cross_section_location.the_geom cannot be null + - memory_control.action_value_1 cannot be null * - 0003 - Error - - v2_culvert.connection_node_end_id cannot be null + - memory_control.action_value_2 cannot be null * - 0003 - Error - - v2_culvert.connection_node_start_id cannot be null + - memory_control.geom cannot be null * - 0003 - Error - - v2_culvert.cross_section_definition_id cannot be null + - memory_control.id cannot be null * - 0003 - Error - - v2_culvert.friction_type cannot be null + - memory_control.target_id cannot be null * - 0003 - Error - - v2_culvert.friction_value cannot be null + - memory_control.target_type cannot be null * - 0003 - Error - - v2_culvert.id cannot be null + - model_settings.id cannot be null * - 0003 - Error - - v2_culvert.invert_level_end_point cannot be null + - model_settings.node_open_water_detection cannot be null * - 0003 - Error - - v2_culvert.invert_level_start_point cannot be null + - numerical_settings.id cannot be null * - 0003 - Error - - v2_dem_average_area.id cannot be null + - obstacle.geom cannot be null * - 0003 - Error - - v2_dem_average_area.the_geom cannot be null + - obstacle.id cannot be null * - 0003 - Error - - v2_exchange_line.channel_id cannot be null + - orifice.connection_node_id_end cannot be null * - 0003 - Error - - v2_exchange_line.id cannot be null + - orifice.connection_node_id_start cannot be null * - 0003 - Error - - v2_exchange_line.the_geom cannot be null + - orifice.crest_level cannot be null * - 0003 - Error - - v2_floodfill.id cannot be null + - orifice.crest_type cannot be null * - 0003 - Error - - v2_global_settings.advection_1d cannot be null + - orifice.geom cannot be null * - 0003 - Error - - v2_global_settings.advection_2d cannot be null + - orifice.id cannot be null * - 0003 - Error - - v2_global_settings.dem_obstacle_detection cannot be null + - physical_settings.id cannot be null * - 0003 - Error - - v2_global_settings.dist_calc_points cannot be null + - pipe.connection_node_id_end cannot be null * - 0003 - Error - - v2_global_settings.flooding_threshold cannot be null + - pipe.connection_node_id_start cannot be null * - 0003 - Error - - v2_global_settings.frict_avg cannot be null + - pipe.exchange_type cannot be null * - 0003 - Error - - v2_global_settings.frict_coef cannot be null + - pipe.geom cannot be null * - 0003 - Error - - v2_global_settings.frict_type cannot be null + - pipe.id cannot be null * - 0003 - Error - - v2_global_settings.grid_space cannot be null + - pipe.invert_level_end cannot be null * - 0003 - Error - - v2_global_settings.id cannot be null + - pipe.invert_level_start cannot be null * - 0003 - Error - - v2_global_settings.initial_waterlevel cannot be null + - potential_breach.geom cannot be null * - 0003 - Error - - v2_global_settings.kmax cannot be null + - potential_breach.id cannot be null * - 0003 - Error - - v2_global_settings.minimum_sim_time_step cannot be null + - pump.capacity cannot be null * - 0003 - Error - - v2_global_settings.numerical_settings_id cannot be null + - pump.connection_node_id cannot be null * - 0003 - Error - - v2_global_settings.output_time_step cannot be null + - pump.geom cannot be null * - 0003 - Error - - v2_global_settings.sim_time_step cannot be null + - pump.id cannot be null * - 0003 - Error - - v2_global_settings.table_step_size cannot be null + - pump.lower_stop_level cannot be null * - 0003 - Error - - v2_global_settings.timestep_plus cannot be null + - pump.start_level cannot be null * - 0003 - Error - - v2_global_settings.use_0d_inflow cannot be null + - pump.type cannot be null * - 0003 - Error - - v2_global_settings.use_1d_flow cannot be null + - pump_map.connection_node_id_end cannot be null * - 0003 - Error - - v2_global_settings.use_2d_flow cannot be null + - pump_map.geom cannot be null * - 0003 - Error - - v2_global_settings.use_2d_rain cannot be null + - pump_map.id cannot be null * - 0003 - Error - - v2_grid_refinement.id cannot be null + - pump_map.pump_id cannot be null * - 0003 - Error - - v2_grid_refinement.refinement_level cannot be null + - simple_infiltration.id cannot be null * - 0003 - Error - - v2_grid_refinement.the_geom cannot be null + - simulation_template_settings.id cannot be null * - 0003 - Error - - v2_grid_refinement_area.id cannot be null + - surface.id cannot be null * - 0003 - Error - - v2_grid_refinement_area.refinement_level cannot be null + - surface_map.geom cannot be null * - 0003 - Error - - v2_grid_refinement_area.the_geom cannot be null + - surface_map.id cannot be null * - 0003 - Error - - v2_groundwater.id cannot be null + - surface_map.surface_id cannot be null * - 0003 - Error - - v2_impervious_surface.id cannot be null + - surface_parameters.id cannot be null * - 0003 - Error - - v2_impervious_surface.surface_class cannot be null + - surface_parameters.infiltration cannot be null * - 0003 - Error - - v2_impervious_surface.surface_inclination cannot be null + - surface_parameters.infiltration_decay_constant cannot be null * - 0003 - Error - - v2_impervious_surface_map.connection_node_id cannot be null + - surface_parameters.infiltration_recovery_constant cannot be null * - 0003 - Error - - v2_impervious_surface_map.id cannot be null + - surface_parameters.max_infiltration_capacity cannot be null * - 0003 - Error - - v2_impervious_surface_map.impervious_surface_id cannot be null + - surface_parameters.min_infiltration_capacity cannot be null * - 0003 - Error - - v2_impervious_surface_map.percentage cannot be null + - surface_parameters.outflow_delay cannot be null * - 0003 - Error - - v2_interflow.id cannot be null + - surface_parameters.surface_layer_thickness cannot be null * - 0003 - Error - - v2_interflow.interflow_type cannot be null + - table_control.action_table cannot be null * - 0003 - Error - - v2_manhole.bottom_level cannot be null + - table_control.action_type cannot be null * - 0003 - Error - - v2_manhole.connection_node_id cannot be null + - table_control.geom cannot be null * - 0003 - Error - - v2_manhole.id cannot be null + - table_control.id cannot be null * - 0003 - Error - - v2_numerical_settings.id cannot be null + - table_control.target_id cannot be null * - 0003 - Error - - v2_obstacle.crest_level cannot be null + - table_control.target_type cannot be null * - 0003 - Error - - v2_obstacle.id cannot be null + - tag.id cannot be null * - 0003 - Error - - v2_obstacle.the_geom cannot be null + - time_step_settings.id cannot be null * - 0003 - Error - - v2_orifice.connection_node_end_id cannot be null + - vegetation_drag_2d.id cannot be null * - 0003 - Error - - v2_orifice.connection_node_start_id cannot be null + - weir.connection_node_id_end cannot be null * - 0003 - Error - - v2_orifice.crest_level cannot be null + - weir.connection_node_id_start cannot be null * - 0003 - Error - - v2_orifice.crest_type cannot be null + - weir.crest_level cannot be null * - 0003 - Error - - v2_orifice.cross_section_definition_id cannot be null + - weir.crest_type cannot be null * - 0003 - Error - - v2_orifice.id cannot be null + - weir.geom cannot be null * - 0003 - Error - - v2_pipe.calculation_type cannot be null + - weir.id cannot be null * - 0003 - Error - - v2_pipe.connection_node_end_id cannot be null + - windshielding_1d.channel_id cannot be null * - 0003 - Error - - v2_pipe.connection_node_start_id cannot be null + - windshielding_1d.geom cannot be null * - 0003 - Error - - v2_pipe.cross_section_definition_id cannot be null - * - 0003 + - windshielding_1d.id cannot be null + * - 0004 - Error - - v2_pipe.friction_type cannot be null - * - 0003 + - aggregation_settings.aggregation_method is not of type ['text'] + * - 0004 - Error - - v2_pipe.friction_value cannot be null - * - 0003 + - aggregation_settings.flow_variable is not of type ['text'] + * - 0004 - Error - - v2_pipe.id cannot be null - * - 0003 + - aggregation_settings.id is not of type ['integer'] + * - 0004 - Error - - v2_pipe.invert_level_end_point cannot be null - * - 0003 + - aggregation_settings.interval is not of type ['integer'] + * - 0004 - Error - - v2_pipe.invert_level_start_point cannot be null - * - 0003 + - boundary_condition_1d.code is not of type ['text'] + * - 0004 - Error - - v2_potential_breach.channel_id cannot be null - * - 0003 + - boundary_condition_1d.connection_node_id is not of type ['integer'] + * - 0004 - Error - - v2_potential_breach.id cannot be null - * - 0003 + - boundary_condition_1d.display_name is not of type ['text'] + * - 0004 - Error - - v2_potential_breach.the_geom cannot be null - * - 0003 + - boundary_condition_1d.geom is not of type ['blob'] + * - 0004 - Error - - v2_pumpstation.capacity cannot be null - * - 0003 + - boundary_condition_1d.id is not of type ['integer'] + * - 0004 - Error - - v2_pumpstation.connection_node_start_id cannot be null - * - 0003 + - boundary_condition_1d.interpolate is not of type ['integer'] + * - 0004 - Error - - v2_pumpstation.id cannot be null - * - 0003 + - boundary_condition_1d.tags is not of type ['text'] + * - 0004 - Error - - v2_pumpstation.lower_stop_level cannot be null - * - 0003 + - boundary_condition_1d.time_units is not of type ['text'] + * - 0004 - Error - - v2_pumpstation.start_level cannot be null - * - 0003 + - boundary_condition_1d.timeseries is not of type ['text'] + * - 0004 - Error - - v2_pumpstation.type cannot be null - * - 0003 + - boundary_condition_1d.type is not of type ['integer'] + * - 0004 - Error - - v2_simple_infiltration.id cannot be null - * - 0003 + - boundary_condition_2d.code is not of type ['text'] + * - 0004 - Error - - v2_surface.id cannot be null - * - 0003 + - boundary_condition_2d.display_name is not of type ['text'] + * - 0004 - Error - - v2_surface.surface_parameters_id cannot be null - * - 0003 + - boundary_condition_2d.geom is not of type ['blob'] + * - 0004 - Error - - v2_surface_map.connection_node_id cannot be null - * - 0003 + - boundary_condition_2d.id is not of type ['integer'] + * - 0004 - Error - - v2_surface_map.id cannot be null - * - 0003 + - boundary_condition_2d.interpolate is not of type ['integer'] + * - 0004 - Error - - v2_surface_map.surface_id cannot be null - * - 0003 + - boundary_condition_2d.tags is not of type ['text'] + * - 0004 - Error - - v2_surface_parameters.id cannot be null - * - 0003 + - boundary_condition_2d.time_units is not of type ['text'] + * - 0004 - Error - - v2_surface_parameters.infiltration cannot be null - * - 0003 + - boundary_condition_2d.timeseries is not of type ['text'] + * - 0004 - Error - - v2_surface_parameters.infiltration_decay_constant cannot be null - * - 0003 + - boundary_condition_2d.type is not of type ['integer'] + * - 0004 - Error - - v2_surface_parameters.infiltration_recovery_constant cannot be null - * - 0003 + - channel.calculation_point_distance is not of type ['integer', 'numeric', 'real'] + * - 0004 - Error - - v2_surface_parameters.max_infiltration_capacity cannot be null - * - 0003 + - channel.code is not of type ['text'] + * - 0004 - Error - - v2_surface_parameters.min_infiltration_capacity cannot be null - * - 0003 + - channel.connection_node_id_end is not of type ['integer'] + * - 0004 - Error - - v2_surface_parameters.outflow_delay cannot be null - * - 0003 + - channel.connection_node_id_start is not of type ['integer'] + * - 0004 - Error - - v2_surface_parameters.surface_layer_thickness cannot be null - * - 0003 + - channel.display_name is not of type ['text'] + * - 0004 - Error - - v2_vegetation_drag.id cannot be null - * - 0003 + - channel.exchange_thickness is not of type ['integer', 'numeric', 'real'] + * - 0004 - Error - - v2_weir.connection_node_end_id cannot be null - * - 0003 + - channel.exchange_type is not of type ['integer'] + * - 0004 - Error - - v2_weir.connection_node_start_id cannot be null - * - 0003 + - channel.geom is not of type ['blob'] + * - 0004 - Error - - v2_weir.crest_level cannot be null - * - 0003 + - channel.hydraulic_conductivity_in is not of type ['integer', 'numeric', 'real'] + * - 0004 - Error - - v2_weir.crest_type cannot be null - * - 0003 + - channel.hydraulic_conductivity_out is not of type ['integer', 'numeric', 'real'] + * - 0004 - Error - - v2_weir.cross_section_definition_id cannot be null - * - 0003 + - channel.id is not of type ['integer'] + * - 0004 - Error - - v2_weir.id cannot be null - * - 0003 + - channel.tags is not of type ['text'] + * - 0004 - Error - - v2_windshielding.channel_id cannot be null - * - 0003 + - connection_node.bottom_level is not of type ['integer', 'numeric', 'real'] + * - 0004 - Error - - v2_windshielding.id cannot be null + - connection_node.code is not of type ['text'] * - 0004 - Error - - v2_1d_boundary_conditions.boundary_type is not of type ['integer'] + - connection_node.display_name is not of type ['text'] * - 0004 - Error - - v2_1d_boundary_conditions.connection_node_id is not of type ['integer'] + - connection_node.exchange_level is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_1d_boundary_conditions.id is not of type ['integer'] + - connection_node.exchange_thickness is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_1d_boundary_conditions.timeseries is not of type ['text'] + - connection_node.exchange_type is not of type ['integer'] * - 0004 - Error - - v2_1d_lateral.connection_node_id is not of type ['integer'] + - connection_node.geom is not of type ['blob'] * - 0004 - Error - - v2_1d_lateral.id is not of type ['integer'] + - connection_node.hydraulic_conductivity_in is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_1d_lateral.timeseries is not of type ['text'] + - connection_node.hydraulic_conductivity_out is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_2d_boundary_conditions.boundary_type is not of type ['integer'] + - connection_node.id is not of type ['integer'] * - 0004 - Error - - v2_2d_boundary_conditions.display_name is not of type ['text'] + - connection_node.initial_water_level is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_2d_boundary_conditions.id is not of type ['integer'] + - connection_node.manhole_surface_level is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_2d_boundary_conditions.the_geom is not of type ['blob'] + - connection_node.storage_area is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_2d_boundary_conditions.timeseries is not of type ['text'] + - connection_node.tags is not of type ['text'] * - 0004 - Error - - v2_2d_lateral.id is not of type ['integer'] + - connection_node.visualisation is not of type ['integer'] * - 0004 - Error - - v2_2d_lateral.the_geom is not of type ['blob'] + - cross_section_location.bank_level is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_2d_lateral.timeseries is not of type ['text'] + - cross_section_location.channel_id is not of type ['integer'] * - 0004 - Error - - v2_2d_lateral.type is not of type ['integer'] + - cross_section_location.code is not of type ['text'] * - 0004 - Error - - v2_aggregation_settings.aggregation_method is not of type ['text'] + - cross_section_location.cross_section_friction_values is not of type ['text'] * - 0004 - Error - - v2_aggregation_settings.flow_variable is not of type ['text'] + - cross_section_location.cross_section_height is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_aggregation_settings.global_settings_id is not of type ['integer'] + - cross_section_location.cross_section_shape is not of type ['integer'] * - 0004 - Error - - v2_aggregation_settings.id is not of type ['integer'] + - cross_section_location.cross_section_table is not of type ['text'] * - 0004 - Error - - v2_aggregation_settings.timestep is not of type ['integer'] + - cross_section_location.cross_section_vegetation_table is not of type ['text'] * - 0004 - Error - - v2_aggregation_settings.var_name is not of type ['text'] + - cross_section_location.cross_section_width is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_channel.calculation_type is not of type ['integer'] + - cross_section_location.friction_type is not of type ['integer'] * - 0004 - Error - - v2_channel.code is not of type ['text'] + - cross_section_location.friction_value is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_channel.connection_node_end_id is not of type ['integer'] + - cross_section_location.geom is not of type ['blob'] * - 0004 - Error - - v2_channel.connection_node_start_id is not of type ['integer'] + - cross_section_location.id is not of type ['integer'] * - 0004 - Error - - v2_channel.display_name is not of type ['text'] + - cross_section_location.reference_level is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_channel.dist_calc_points is not of type ['integer', 'numeric', 'real'] + - cross_section_location.tags is not of type ['text'] * - 0004 - Error - - v2_channel.exchange_thickness is not of type ['integer', 'numeric', 'real'] + - cross_section_location.vegetation_drag_coefficient is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_channel.hydraulic_conductivity_in is not of type ['integer', 'numeric', 'real'] + - cross_section_location.vegetation_height is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_channel.hydraulic_conductivity_out is not of type ['integer', 'numeric', 'real'] + - cross_section_location.vegetation_stem_density is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_channel.id is not of type ['integer'] + - cross_section_location.vegetation_stem_diameter is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_channel.the_geom is not of type ['blob'] + - culvert.calculation_point_distance is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_channel.zoom_category is not of type ['integer'] + - culvert.code is not of type ['text'] * - 0004 - Error - - v2_connection_nodes.code is not of type ['text'] + - culvert.connection_node_id_end is not of type ['integer'] * - 0004 - Error - - v2_connection_nodes.id is not of type ['integer'] + - culvert.connection_node_id_start is not of type ['integer'] * - 0004 - Error - - v2_connection_nodes.initial_waterlevel is not of type ['integer', 'numeric', 'real'] + - culvert.cross_section_height is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_connection_nodes.storage_area is not of type ['integer', 'numeric', 'real'] + - culvert.cross_section_shape is not of type ['integer'] * - 0004 - Error - - v2_connection_nodes.the_geom is not of type ['blob'] + - culvert.cross_section_table is not of type ['text'] * - 0004 - Error - - v2_connection_nodes.the_geom_linestring is not of type ['blob'] + - culvert.cross_section_width is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_control.control_group_id is not of type ['integer'] + - culvert.discharge_coefficient_negative is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_control.control_id is not of type ['integer'] + - culvert.discharge_coefficient_positive is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_control.control_type is not of type ['text'] + - culvert.display_name is not of type ['text'] * - 0004 - Error - - v2_control.end is not of type ['text'] + - culvert.exchange_type is not of type ['integer'] * - 0004 - Error - - v2_control.id is not of type ['integer'] + - culvert.friction_type is not of type ['integer'] * - 0004 - Error - - v2_control.measure_frequency is not of type ['integer'] + - culvert.friction_value is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_control.measure_group_id is not of type ['integer'] + - culvert.geom is not of type ['blob'] * - 0004 - Error - - v2_control.start is not of type ['text'] + - culvert.id is not of type ['integer'] * - 0004 - Error - - v2_control_delta.action_time is not of type ['integer', 'numeric', 'real'] + - culvert.invert_level_end is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_control_delta.action_type is not of type ['text'] + - culvert.invert_level_start is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_control_delta.action_value is not of type ['text'] + - culvert.material_id is not of type ['integer'] * - 0004 - Error - - v2_control_delta.id is not of type ['integer'] + - culvert.tags is not of type ['text'] * - 0004 - Error - - v2_control_delta.measure_delta is not of type ['text'] + - dem_average_area.code is not of type ['text'] * - 0004 - Error - - v2_control_delta.measure_dt is not of type ['integer', 'numeric', 'real'] + - dem_average_area.display_name is not of type ['text'] * - 0004 - Error - - v2_control_delta.measure_variable is not of type ['text'] + - dem_average_area.geom is not of type ['blob'] * - 0004 - Error - - v2_control_delta.target_id is not of type ['integer'] + - dem_average_area.id is not of type ['integer'] * - 0004 - Error - - v2_control_delta.target_type is not of type ['text'] + - dem_average_area.tags is not of type ['text'] * - 0004 - Error - - v2_control_group.description is not of type ['text'] + - dry_weather_flow.code is not of type ['text'] * - 0004 - Error - - v2_control_group.id is not of type ['integer'] + - dry_weather_flow.daily_total is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_control_group.name is not of type ['text'] + - dry_weather_flow.display_name is not of type ['text'] * - 0004 - Error - - v2_control_measure_group.id is not of type ['integer'] + - dry_weather_flow.dry_weather_flow_distribution_id is not of type ['integer'] * - 0004 - Error - - v2_control_measure_map.id is not of type ['integer'] + - dry_weather_flow.geom is not of type ['blob'] * - 0004 - Error - - v2_control_measure_map.measure_group_id is not of type ['integer'] + - dry_weather_flow.id is not of type ['integer'] * - 0004 - Error - - v2_control_measure_map.object_id is not of type ['integer'] + - dry_weather_flow.interpolate is not of type ['integer'] * - 0004 - Error - - v2_control_measure_map.object_type is not of type ['text'] + - dry_weather_flow.multiplier is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_control_measure_map.weight is not of type ['integer', 'numeric', 'real'] + - dry_weather_flow.tags is not of type ['text'] * - 0004 - Error - - v2_control_memory.action_type is not of type ['text'] + - dry_weather_flow_distribution.description is not of type ['text'] * - 0004 - Error - - v2_control_memory.action_value is not of type ['text'] + - dry_weather_flow_distribution.distribution is not of type ['text'] * - 0004 - Error - - v2_control_memory.id is not of type ['integer'] + - dry_weather_flow_distribution.id is not of type ['integer'] * - 0004 - Error - - v2_control_memory.is_active is not of type ['integer'] + - dry_weather_flow_distribution.tags is not of type ['text'] * - 0004 - Error - - v2_control_memory.is_inverse is not of type ['integer'] + - dry_weather_flow_map.code is not of type ['text'] * - 0004 - Error - - v2_control_memory.lower_threshold is not of type ['integer', 'numeric', 'real'] + - dry_weather_flow_map.connection_node_id is not of type ['integer'] * - 0004 - Error - - v2_control_memory.measure_variable is not of type ['text'] + - dry_weather_flow_map.display_name is not of type ['text'] * - 0004 - Error - - v2_control_memory.target_id is not of type ['integer'] + - dry_weather_flow_map.dry_weather_flow_id is not of type ['integer'] * - 0004 - Error - - v2_control_memory.target_type is not of type ['text'] + - dry_weather_flow_map.geom is not of type ['blob'] * - 0004 - Error - - v2_control_memory.upper_threshold is not of type ['integer', 'numeric', 'real'] + - dry_weather_flow_map.id is not of type ['integer'] * - 0004 - Error - - v2_control_pid.action_type is not of type ['text'] + - dry_weather_flow_map.percentage is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_control_pid.id is not of type ['integer'] + - dry_weather_flow_map.tags is not of type ['text'] * - 0004 - Error - - v2_control_pid.kd is not of type ['integer', 'numeric', 'real'] + - exchange_line.channel_id is not of type ['integer'] * - 0004 - Error - - v2_control_pid.ki is not of type ['integer', 'numeric', 'real'] + - exchange_line.code is not of type ['text'] * - 0004 - Error - - v2_control_pid.kp is not of type ['integer', 'numeric', 'real'] + - exchange_line.display_name is not of type ['text'] * - 0004 - Error - - v2_control_pid.measure_variable is not of type ['text'] + - exchange_line.exchange_level is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_control_pid.setpoint is not of type ['integer', 'numeric', 'real'] + - exchange_line.geom is not of type ['blob'] * - 0004 - Error - - v2_control_pid.target_lower_limit is not of type ['text'] + - exchange_line.id is not of type ['integer'] * - 0004 - Error - - v2_control_pid.target_type is not of type ['text'] + - exchange_line.tags is not of type ['text'] * - 0004 - Error - - v2_control_pid.target_upper_limit is not of type ['text'] + - grid_refinement_area.code is not of type ['text'] * - 0004 - Error - - v2_control_table.action_table is not of type ['text'] + - grid_refinement_area.display_name is not of type ['text'] * - 0004 - Error - - v2_control_table.action_type is not of type ['text'] + - grid_refinement_area.geom is not of type ['blob'] * - 0004 - Error - - v2_control_table.id is not of type ['integer'] + - grid_refinement_area.grid_level is not of type ['integer'] * - 0004 - Error - - v2_control_table.measure_operator is not of type ['text'] + - grid_refinement_area.id is not of type ['integer'] * - 0004 - Error - - v2_control_table.measure_variable is not of type ['text'] + - grid_refinement_area.tags is not of type ['text'] * - 0004 - Error - - v2_control_table.target_id is not of type ['integer'] + - grid_refinement_line.code is not of type ['text'] * - 0004 - Error - - v2_control_table.target_type is not of type ['text'] + - grid_refinement_line.display_name is not of type ['text'] * - 0004 - Error - - v2_control_timed.action_table is not of type ['text'] + - grid_refinement_line.geom is not of type ['blob'] * - 0004 - Error - - v2_control_timed.action_type is not of type ['text'] + - grid_refinement_line.grid_level is not of type ['integer'] * - 0004 - Error - - v2_control_timed.id is not of type ['integer'] + - grid_refinement_line.id is not of type ['integer'] * - 0004 - Error - - v2_control_timed.target_id is not of type ['integer'] + - grid_refinement_line.tags is not of type ['text'] * - 0004 - Error - - v2_control_timed.target_type is not of type ['text'] + - groundwater.equilibrium_infiltration_rate is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_cross_section_definition.code is not of type ['text'] + - groundwater.equilibrium_infiltration_rate_aggregation is not of type ['integer'] * - 0004 - Error - - v2_cross_section_definition.friction_values is not of type ['text'] + - groundwater.equilibrium_infiltration_rate_file is not of type ['text'] * - 0004 - Error - - v2_cross_section_definition.height is not of type ['text'] + - groundwater.groundwater_hydraulic_conductivity is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_cross_section_definition.id is not of type ['integer'] + - groundwater.groundwater_hydraulic_conductivity_aggregation is not of type ['integer'] * - 0004 - Error - - v2_cross_section_definition.shape is not of type ['integer'] + - groundwater.groundwater_hydraulic_conductivity_file is not of type ['text'] * - 0004 - Error - - v2_cross_section_definition.vegetation_drag_coefficients is not of type ['text'] + - groundwater.groundwater_impervious_layer_level is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_cross_section_definition.vegetation_heights is not of type ['text'] + - groundwater.groundwater_impervious_layer_level_aggregation is not of type ['integer'] * - 0004 - Error - - v2_cross_section_definition.vegetation_stem_densities is not of type ['text'] + - groundwater.groundwater_impervious_layer_level_file is not of type ['text'] * - 0004 - Error - - v2_cross_section_definition.vegetation_stem_diameters is not of type ['text'] + - groundwater.id is not of type ['integer'] * - 0004 - Error - - v2_cross_section_definition.width is not of type ['text'] + - groundwater.infiltration_decay_period is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_cross_section_location.bank_level is not of type ['integer', 'numeric', 'real'] + - groundwater.infiltration_decay_period_aggregation is not of type ['integer'] * - 0004 - Error - - v2_cross_section_location.channel_id is not of type ['integer'] + - groundwater.infiltration_decay_period_file is not of type ['text'] * - 0004 - Error - - v2_cross_section_location.code is not of type ['text'] + - groundwater.initial_infiltration_rate is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_cross_section_location.definition_id is not of type ['integer'] + - groundwater.initial_infiltration_rate_aggregation is not of type ['integer'] * - 0004 - Error - - v2_cross_section_location.friction_type is not of type ['integer'] + - groundwater.initial_infiltration_rate_file is not of type ['text'] * - 0004 - Error - - v2_cross_section_location.friction_value is not of type ['integer', 'numeric', 'real'] + - groundwater.leakage is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_cross_section_location.id is not of type ['integer'] + - groundwater.leakage_file is not of type ['text'] * - 0004 - Error - - v2_cross_section_location.reference_level is not of type ['integer', 'numeric', 'real'] + - groundwater.phreatic_storage_capacity is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_cross_section_location.the_geom is not of type ['blob'] + - groundwater.phreatic_storage_capacity_aggregation is not of type ['integer'] * - 0004 - Error - - v2_cross_section_location.vegetation_drag_coefficient is not of type ['integer', 'numeric', 'real'] + - groundwater.phreatic_storage_capacity_file is not of type ['text'] * - 0004 - Error - - v2_cross_section_location.vegetation_height is not of type ['integer', 'numeric', 'real'] + - initial_conditions.id is not of type ['integer'] * - 0004 - Error - - v2_cross_section_location.vegetation_stem_density is not of type ['integer', 'numeric', 'real'] + - initial_conditions.initial_groundwater_level is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_cross_section_location.vegetation_stem_diameter is not of type ['integer', 'numeric', 'real'] + - initial_conditions.initial_groundwater_level_aggregation is not of type ['integer'] * - 0004 - Error - - v2_culvert.calculation_type is not of type ['integer'] + - initial_conditions.initial_groundwater_level_file is not of type ['text'] * - 0004 - Error - - v2_culvert.code is not of type ['text'] + - initial_conditions.initial_water_level is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_culvert.connection_node_end_id is not of type ['integer'] + - initial_conditions.initial_water_level_aggregation is not of type ['integer'] * - 0004 - Error - - v2_culvert.connection_node_start_id is not of type ['integer'] + - initial_conditions.initial_water_level_file is not of type ['text'] * - 0004 - Error - - v2_culvert.cross_section_definition_id is not of type ['integer'] + - interception.id is not of type ['integer'] * - 0004 - Error - - v2_culvert.discharge_coefficient_negative is not of type ['integer', 'numeric', 'real'] + - interception.interception is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_culvert.discharge_coefficient_positive is not of type ['integer', 'numeric', 'real'] + - interception.interception_file is not of type ['text'] * - 0004 - Error - - v2_culvert.display_name is not of type ['text'] + - interflow.hydraulic_conductivity is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_culvert.dist_calc_points is not of type ['integer', 'numeric', 'real'] + - interflow.hydraulic_conductivity_file is not of type ['text'] * - 0004 - Error - - v2_culvert.friction_type is not of type ['integer'] + - interflow.id is not of type ['integer'] * - 0004 - Error - - v2_culvert.friction_value is not of type ['integer', 'numeric', 'real'] + - interflow.impervious_layer_elevation is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_culvert.id is not of type ['integer'] + - interflow.interflow_type is not of type ['integer'] * - 0004 - Error - - v2_culvert.invert_level_end_point is not of type ['integer', 'numeric', 'real'] + - interflow.porosity is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_culvert.invert_level_start_point is not of type ['integer', 'numeric', 'real'] + - interflow.porosity_file is not of type ['text'] * - 0004 - Error - - v2_culvert.the_geom is not of type ['blob'] + - interflow.porosity_layer_thickness is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_culvert.zoom_category is not of type ['integer'] + - lateral_1d.code is not of type ['text'] * - 0004 - Error - - v2_dem_average_area.id is not of type ['integer'] + - lateral_1d.connection_node_id is not of type ['integer'] * - 0004 - Error - - v2_dem_average_area.the_geom is not of type ['blob'] + - lateral_1d.display_name is not of type ['text'] * - 0004 - Error - - v2_exchange_line.channel_id is not of type ['integer'] + - lateral_1d.geom is not of type ['blob'] * - 0004 - Error - - v2_exchange_line.exchange_level is not of type ['integer', 'numeric', 'real'] + - lateral_1d.id is not of type ['integer'] * - 0004 - Error - - v2_exchange_line.id is not of type ['integer'] + - lateral_1d.interpolate is not of type ['integer'] * - 0004 - Error - - v2_exchange_line.the_geom is not of type ['blob'] + - lateral_1d.offset is not of type ['integer'] * - 0004 - Error - - v2_floodfill.id is not of type ['integer'] + - lateral_1d.tags is not of type ['text'] * - 0004 - Error - - v2_floodfill.the_geom is not of type ['blob'] + - lateral_1d.time_units is not of type ['text'] * - 0004 - Error - - v2_floodfill.waterlevel is not of type ['integer', 'numeric', 'real'] + - lateral_1d.timeseries is not of type ['text'] * - 0004 - Error - - v2_global_settings.advection_1d is not of type ['integer'] + - lateral_1d.units is not of type ['text'] * - 0004 - Error - - v2_global_settings.advection_2d is not of type ['integer'] + - lateral_2d.code is not of type ['text'] * - 0004 - Error - - v2_global_settings.control_group_id is not of type ['integer'] + - lateral_2d.display_name is not of type ['text'] * - 0004 - Error - - v2_global_settings.dem_file is not of type ['text'] + - lateral_2d.geom is not of type ['blob'] * - 0004 - Error - - v2_global_settings.dem_obstacle_detection is not of type ['integer'] + - lateral_2d.id is not of type ['integer'] * - 0004 - Error - - v2_global_settings.dem_obstacle_height is not of type ['integer', 'numeric', 'real'] + - lateral_2d.interpolate is not of type ['integer'] * - 0004 - Error - - v2_global_settings.dist_calc_points is not of type ['integer', 'numeric', 'real'] + - lateral_2d.offset is not of type ['integer'] * - 0004 - Error - - v2_global_settings.embedded_cutoff_threshold is not of type ['integer', 'numeric', 'real'] + - lateral_2d.tags is not of type ['text'] * - 0004 - Error - - v2_global_settings.epsg_code is not of type ['integer'] + - lateral_2d.time_units is not of type ['text'] * - 0004 - Error - - v2_global_settings.flooding_threshold is not of type ['integer', 'numeric', 'real'] + - lateral_2d.timeseries is not of type ['text'] * - 0004 - Error - - v2_global_settings.frict_avg is not of type ['integer'] + - lateral_2d.type is not of type ['integer'] * - 0004 - Error - - v2_global_settings.frict_coef is not of type ['integer', 'numeric', 'real'] + - lateral_2d.units is not of type ['text'] * - 0004 - Error - - v2_global_settings.frict_coef_file is not of type ['text'] + - material.description is not of type ['text'] * - 0004 - Error - - v2_global_settings.frict_type is not of type ['integer'] + - material.friction_coefficient is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_global_settings.grid_space is not of type ['integer', 'numeric', 'real'] + - material.friction_type is not of type ['integer'] * - 0004 - Error - - v2_global_settings.groundwater_settings_id is not of type ['integer'] + - material.id is not of type ['integer'] * - 0004 - Error - - v2_global_settings.guess_dams is not of type ['integer'] + - measure_location.code is not of type ['text'] * - 0004 - Error - - v2_global_settings.id is not of type ['integer'] + - measure_location.connection_node_id is not of type ['integer'] * - 0004 - Error - - v2_global_settings.initial_groundwater_level is not of type ['integer', 'numeric', 'real'] + - measure_location.display_name is not of type ['text'] * - 0004 - Error - - v2_global_settings.initial_groundwater_level_file is not of type ['text'] + - measure_location.geom is not of type ['blob'] * - 0004 - Error - - v2_global_settings.initial_groundwater_level_type is not of type ['integer'] + - measure_location.id is not of type ['integer'] * - 0004 - Error - - v2_global_settings.initial_waterlevel is not of type ['integer', 'numeric', 'real'] + - measure_location.measure_variable is not of type ['text'] * - 0004 - Error - - v2_global_settings.initial_waterlevel_file is not of type ['text'] + - measure_location.tags is not of type ['text'] * - 0004 - Error - - v2_global_settings.interception_file is not of type ['text'] + - measure_map.code is not of type ['text'] * - 0004 - Error - - v2_global_settings.interception_global is not of type ['integer', 'numeric', 'real'] + - measure_map.control_id is not of type ['integer'] * - 0004 - Error - - v2_global_settings.interflow_settings_id is not of type ['integer'] + - measure_map.control_type is not of type ['text'] * - 0004 - Error - - v2_global_settings.kmax is not of type ['integer'] + - measure_map.display_name is not of type ['text'] * - 0004 - Error - - v2_global_settings.manhole_storage_area is not of type ['integer', 'numeric', 'real'] + - measure_map.geom is not of type ['blob'] * - 0004 - Error - - v2_global_settings.max_angle_1d_advection is not of type ['integer', 'numeric', 'real'] + - measure_map.id is not of type ['integer'] * - 0004 - Error - - v2_global_settings.maximum_sim_time_step is not of type ['integer', 'numeric', 'real'] + - measure_map.measure_location_id is not of type ['integer'] * - 0004 - Error - - v2_global_settings.maximum_table_step_size is not of type ['integer', 'numeric', 'real'] + - measure_map.tags is not of type ['text'] * - 0004 - Error - - v2_global_settings.minimum_sim_time_step is not of type ['integer', 'numeric', 'real'] + - measure_map.weight is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_global_settings.name is not of type ['text'] + - memory_control.action_type is not of type ['text'] * - 0004 - Error - - v2_global_settings.nr_timesteps is not of type ['integer'] + - memory_control.action_value_1 is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_global_settings.numerical_settings_id is not of type ['integer'] + - memory_control.action_value_2 is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_global_settings.output_time_step is not of type ['integer', 'numeric', 'real'] + - memory_control.code is not of type ['text'] * - 0004 - Error - - v2_global_settings.sim_time_step is not of type ['integer', 'numeric', 'real'] + - memory_control.display_name is not of type ['text'] * - 0004 - Error - - v2_global_settings.simple_infiltration_settings_id is not of type ['integer'] + - memory_control.geom is not of type ['blob'] * - 0004 - Error - - v2_global_settings.start_date is not of type ['text'] + - memory_control.id is not of type ['integer'] * - 0004 - Error - - v2_global_settings.start_time is not of type ['text'] + - memory_control.is_active is not of type ['integer'] * - 0004 - Error - - v2_global_settings.table_step_size is not of type ['integer', 'numeric', 'real'] + - memory_control.is_inverse is not of type ['integer'] * - 0004 - Error - - v2_global_settings.table_step_size_1d is not of type ['integer', 'numeric', 'real'] + - memory_control.lower_threshold is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_global_settings.timestep_plus is not of type ['integer'] + - memory_control.tags is not of type ['text'] * - 0004 - Error - - v2_global_settings.use_0d_inflow is not of type ['integer'] + - memory_control.target_id is not of type ['integer'] * - 0004 - Error - - v2_global_settings.use_1d_flow is not of type ['integer'] + - memory_control.target_type is not of type ['text'] * - 0004 - Error - - v2_global_settings.use_2d_flow is not of type ['integer'] + - memory_control.upper_threshold is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_global_settings.use_2d_rain is not of type ['integer'] + - model_settings.calculation_point_distance_1d is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_global_settings.vegetation_drag_settings_id is not of type ['integer'] + - model_settings.dem_file is not of type ['text'] * - 0004 - Error - - v2_global_settings.water_level_ini_type is not of type ['integer'] + - model_settings.embedded_cutoff_threshold is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_global_settings.wind_shielding_file is not of type ['text'] + - model_settings.friction_averaging is not of type ['integer'] * - 0004 - Error - - v2_grid_refinement.code is not of type ['text'] + - model_settings.friction_coefficient is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_grid_refinement.display_name is not of type ['text'] + - model_settings.friction_coefficient_file is not of type ['text'] * - 0004 - Error - - v2_grid_refinement.id is not of type ['integer'] + - model_settings.friction_type is not of type ['integer'] * - 0004 - Error - - v2_grid_refinement.refinement_level is not of type ['integer'] + - model_settings.id is not of type ['integer'] * - 0004 - Error - - v2_grid_refinement.the_geom is not of type ['blob'] + - model_settings.manhole_aboveground_storage_area is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_grid_refinement_area.code is not of type ['text'] + - model_settings.max_angle_1d_advection is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_grid_refinement_area.display_name is not of type ['text'] + - model_settings.maximum_table_step_size is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_grid_refinement_area.id is not of type ['integer'] + - model_settings.minimum_cell_size is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_grid_refinement_area.refinement_level is not of type ['integer'] + - model_settings.minimum_table_step_size is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_grid_refinement_area.the_geom is not of type ['blob'] + - model_settings.node_open_water_detection is not of type ['integer'] * - 0004 - Error - - v2_groundwater.display_name is not of type ['text'] + - model_settings.nr_grid_levels is not of type ['integer'] * - 0004 - Error - - v2_groundwater.equilibrium_infiltration_rate is not of type ['integer', 'numeric', 'real'] + - model_settings.table_step_size_1d is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_groundwater.equilibrium_infiltration_rate_file is not of type ['text'] + - model_settings.use_1d_flow is not of type ['integer'] * - 0004 - Error - - v2_groundwater.equilibrium_infiltration_rate_type is not of type ['integer'] + - model_settings.use_2d_flow is not of type ['integer'] * - 0004 - Error - - v2_groundwater.groundwater_hydro_connectivity is not of type ['integer', 'numeric', 'real'] + - model_settings.use_2d_rain is not of type ['integer'] * - 0004 - Error - - v2_groundwater.groundwater_hydro_connectivity_file is not of type ['text'] + - model_settings.use_groundwater_flow is not of type ['integer'] * - 0004 - Error - - v2_groundwater.groundwater_hydro_connectivity_type is not of type ['integer'] + - model_settings.use_groundwater_storage is not of type ['integer'] * - 0004 - Error - - v2_groundwater.groundwater_impervious_layer_level is not of type ['integer', 'numeric', 'real'] + - model_settings.use_interception is not of type ['integer'] * - 0004 - Error - - v2_groundwater.groundwater_impervious_layer_level_file is not of type ['text'] + - model_settings.use_interflow is not of type ['integer'] * - 0004 - Error - - v2_groundwater.groundwater_impervious_layer_level_type is not of type ['integer'] + - model_settings.use_simple_infiltration is not of type ['integer'] * - 0004 - Error - - v2_groundwater.id is not of type ['integer'] + - model_settings.use_vegetation_drag_2d is not of type ['integer'] * - 0004 - Error - - v2_groundwater.infiltration_decay_period is not of type ['integer', 'numeric', 'real'] + - numerical_settings.cfl_strictness_factor_1d is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_groundwater.infiltration_decay_period_file is not of type ['text'] + - numerical_settings.cfl_strictness_factor_2d is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_groundwater.infiltration_decay_period_type is not of type ['integer'] + - numerical_settings.convergence_cg is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_groundwater.initial_infiltration_rate is not of type ['integer', 'numeric', 'real'] + - numerical_settings.convergence_eps is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_groundwater.initial_infiltration_rate_file is not of type ['text'] + - numerical_settings.flooding_threshold is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_groundwater.initial_infiltration_rate_type is not of type ['integer'] + - numerical_settings.flow_direction_threshold is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_groundwater.leakage is not of type ['integer', 'numeric', 'real'] + - numerical_settings.friction_shallow_water_depth_correction is not of type ['integer'] * - 0004 - Error - - v2_groundwater.leakage_file is not of type ['text'] + - numerical_settings.general_numerical_threshold is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_groundwater.phreatic_storage_capacity is not of type ['integer', 'numeric', 'real'] + - numerical_settings.id is not of type ['integer'] * - 0004 - Error - - v2_groundwater.phreatic_storage_capacity_file is not of type ['text'] + - numerical_settings.limiter_slope_crossectional_area_2d is not of type ['integer'] * - 0004 - Error - - v2_groundwater.phreatic_storage_capacity_type is not of type ['integer'] + - numerical_settings.limiter_slope_friction_2d is not of type ['integer'] * - 0004 - Error - - v2_impervious_surface.area is not of type ['integer', 'numeric', 'real'] + - numerical_settings.limiter_slope_thin_water_layer is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_impervious_surface.code is not of type ['text'] + - numerical_settings.limiter_waterlevel_gradient_1d is not of type ['integer'] * - 0004 - Error - - v2_impervious_surface.display_name is not of type ['text'] + - numerical_settings.limiter_waterlevel_gradient_2d is not of type ['integer'] * - 0004 - Error - - v2_impervious_surface.dry_weather_flow is not of type ['integer', 'numeric', 'real'] + - numerical_settings.max_degree_gauss_seidel is not of type ['integer'] * - 0004 - Error - - v2_impervious_surface.id is not of type ['integer'] + - numerical_settings.max_non_linear_newton_iterations is not of type ['integer'] * - 0004 - Error - - v2_impervious_surface.nr_of_inhabitants is not of type ['integer', 'numeric', 'real'] + - numerical_settings.min_friction_velocity is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_impervious_surface.surface_class is not of type ['text'] + - numerical_settings.min_surface_area is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_impervious_surface.surface_inclination is not of type ['text'] + - numerical_settings.preissmann_slot is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_impervious_surface.surface_sub_class is not of type ['text'] + - numerical_settings.pump_implicit_ratio is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_impervious_surface.the_geom is not of type ['blob'] + - numerical_settings.time_integration_method is not of type ['integer'] * - 0004 - Error - - v2_impervious_surface.zoom_category is not of type ['integer'] + - numerical_settings.use_nested_newton is not of type ['integer'] * - 0004 - Error - - v2_impervious_surface_map.connection_node_id is not of type ['integer'] + - numerical_settings.use_of_cg is not of type ['integer'] * - 0004 - Error - - v2_impervious_surface_map.id is not of type ['integer'] + - numerical_settings.use_preconditioner_cg is not of type ['integer'] * - 0004 - Error - - v2_impervious_surface_map.impervious_surface_id is not of type ['integer'] + - obstacle.affects_1d2d_closed is not of type ['integer'] * - 0004 - Error - - v2_impervious_surface_map.percentage is not of type ['integer', 'numeric', 'real'] + - obstacle.affects_1d2d_open_water is not of type ['integer'] * - 0004 - Error - - v2_interflow.display_name is not of type ['text'] + - obstacle.affects_2d is not of type ['integer'] * - 0004 - Error - - v2_interflow.hydraulic_conductivity is not of type ['integer', 'numeric', 'real'] + - obstacle.code is not of type ['text'] * - 0004 - Error - - v2_interflow.hydraulic_conductivity_file is not of type ['text'] + - obstacle.crest_level is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_interflow.id is not of type ['integer'] + - obstacle.display_name is not of type ['text'] * - 0004 - Error - - v2_interflow.impervious_layer_elevation is not of type ['integer', 'numeric', 'real'] + - obstacle.geom is not of type ['blob'] * - 0004 - Error - - v2_interflow.interflow_type is not of type ['integer'] + - obstacle.id is not of type ['integer'] * - 0004 - Error - - v2_interflow.porosity is not of type ['integer', 'numeric', 'real'] + - obstacle.tags is not of type ['text'] * - 0004 - Error - - v2_interflow.porosity_file is not of type ['text'] + - orifice.code is not of type ['text'] * - 0004 - Error - - v2_interflow.porosity_layer_thickness is not of type ['integer', 'numeric', 'real'] + - orifice.connection_node_id_end is not of type ['integer'] * - 0004 - Error - - v2_manhole.bottom_level is not of type ['integer', 'numeric', 'real'] + - orifice.connection_node_id_start is not of type ['integer'] * - 0004 - Error - - v2_manhole.calculation_type is not of type ['integer'] + - orifice.crest_level is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_manhole.code is not of type ['text'] + - orifice.crest_type is not of type ['integer'] * - 0004 - Error - - v2_manhole.connection_node_id is not of type ['integer'] + - orifice.cross_section_height is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_manhole.display_name is not of type ['text'] + - orifice.cross_section_shape is not of type ['integer'] * - 0004 - Error - - v2_manhole.drain_level is not of type ['integer', 'numeric', 'real'] + - orifice.cross_section_table is not of type ['text'] * - 0004 - Error - - v2_manhole.exchange_thickness is not of type ['integer', 'numeric', 'real'] + - orifice.cross_section_width is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_manhole.hydraulic_conductivity_in is not of type ['integer', 'numeric', 'real'] + - orifice.discharge_coefficient_negative is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_manhole.hydraulic_conductivity_out is not of type ['integer', 'numeric', 'real'] + - orifice.discharge_coefficient_positive is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_manhole.id is not of type ['integer'] + - orifice.display_name is not of type ['text'] * - 0004 - Error - - v2_manhole.length is not of type ['integer', 'numeric', 'real'] + - orifice.friction_type is not of type ['integer'] * - 0004 - Error - - v2_manhole.manhole_indicator is not of type ['integer'] + - orifice.friction_value is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_manhole.sediment_level is not of type ['integer', 'numeric', 'real'] + - orifice.geom is not of type ['blob'] * - 0004 - Error - - v2_manhole.shape is not of type ['text'] + - orifice.id is not of type ['integer'] * - 0004 - Error - - v2_manhole.surface_level is not of type ['integer', 'numeric', 'real'] + - orifice.material_id is not of type ['integer'] * - 0004 - Error - - v2_manhole.width is not of type ['integer', 'numeric', 'real'] + - orifice.sewerage is not of type ['integer'] * - 0004 - Error - - v2_manhole.zoom_category is not of type ['integer'] + - orifice.tags is not of type ['text'] * - 0004 - Error - - v2_numerical_settings.cfl_strictness_factor_1d is not of type ['integer', 'numeric', 'real'] + - physical_settings.id is not of type ['integer'] * - 0004 - Error - - v2_numerical_settings.cfl_strictness_factor_2d is not of type ['integer', 'numeric', 'real'] + - physical_settings.use_advection_1d is not of type ['integer'] * - 0004 - Error - - v2_numerical_settings.convergence_cg is not of type ['integer', 'numeric', 'real'] + - physical_settings.use_advection_2d is not of type ['integer'] * - 0004 - Error - - v2_numerical_settings.convergence_eps is not of type ['integer', 'numeric', 'real'] + - pipe.calculation_point_distance is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_numerical_settings.flow_direction_threshold is not of type ['integer', 'numeric', 'real'] + - pipe.code is not of type ['text'] * - 0004 - Error - - v2_numerical_settings.frict_shallow_water_correction is not of type ['integer'] + - pipe.connection_node_id_end is not of type ['integer'] * - 0004 - Error - - v2_numerical_settings.general_numerical_threshold is not of type ['integer', 'numeric', 'real'] + - pipe.connection_node_id_start is not of type ['integer'] * - 0004 - Error - - v2_numerical_settings.id is not of type ['integer'] + - pipe.cross_section_height is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_numerical_settings.integration_method is not of type ['integer'] + - pipe.cross_section_shape is not of type ['integer'] * - 0004 - Error - - v2_numerical_settings.limiter_grad_1d is not of type ['integer'] + - pipe.cross_section_table is not of type ['text'] * - 0004 - Error - - v2_numerical_settings.limiter_grad_2d is not of type ['integer'] + - pipe.cross_section_width is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_numerical_settings.limiter_slope_crossectional_area_2d is not of type ['integer'] + - pipe.display_name is not of type ['text'] * - 0004 - Error - - v2_numerical_settings.limiter_slope_friction_2d is not of type ['integer'] + - pipe.exchange_thickness is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_numerical_settings.max_degree is not of type ['integer'] + - pipe.exchange_type is not of type ['integer'] * - 0004 - Error - - v2_numerical_settings.max_nonlin_iterations is not of type ['integer'] + - pipe.friction_type is not of type ['integer'] * - 0004 - Error - - v2_numerical_settings.minimum_friction_velocity is not of type ['integer', 'numeric', 'real'] + - pipe.friction_value is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_numerical_settings.minimum_surface_area is not of type ['integer', 'numeric', 'real'] + - pipe.geom is not of type ['blob'] * - 0004 - Error - - v2_numerical_settings.precon_cg is not of type ['integer'] + - pipe.hydraulic_conductivity_in is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_numerical_settings.preissmann_slot is not of type ['integer', 'numeric', 'real'] + - pipe.hydraulic_conductivity_out is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_numerical_settings.pump_implicit_ratio is not of type ['integer', 'numeric', 'real'] + - pipe.id is not of type ['integer'] * - 0004 - Error - - v2_numerical_settings.thin_water_layer_definition is not of type ['integer', 'numeric', 'real'] + - pipe.invert_level_end is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_numerical_settings.use_of_cg is not of type ['integer'] + - pipe.invert_level_start is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_numerical_settings.use_of_nested_newton is not of type ['integer'] + - pipe.material_id is not of type ['integer'] * - 0004 - Error - - v2_obstacle.code is not of type ['text'] + - pipe.sewerage_type is not of type ['integer'] * - 0004 - Error - - v2_obstacle.crest_level is not of type ['integer', 'numeric', 'real'] + - pipe.tags is not of type ['text'] * - 0004 - Error - - v2_obstacle.id is not of type ['integer'] + - potential_breach.channel_id is not of type ['integer'] * - 0004 - Error - - v2_obstacle.the_geom is not of type ['blob'] + - potential_breach.code is not of type ['text'] * - 0004 - Error - - v2_orifice.code is not of type ['text'] + - potential_breach.display_name is not of type ['text'] * - 0004 - Error - - v2_orifice.connection_node_end_id is not of type ['integer'] + - potential_breach.final_exchange_level is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_orifice.connection_node_start_id is not of type ['integer'] + - potential_breach.geom is not of type ['blob'] * - 0004 - Error - - v2_orifice.crest_level is not of type ['integer', 'numeric', 'real'] + - potential_breach.id is not of type ['integer'] * - 0004 - Error - - v2_orifice.crest_type is not of type ['integer'] + - potential_breach.initial_exchange_level is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_orifice.cross_section_definition_id is not of type ['integer'] + - potential_breach.levee_material is not of type ['integer'] * - 0004 - Error - - v2_orifice.discharge_coefficient_negative is not of type ['integer', 'numeric', 'real'] + - potential_breach.tags is not of type ['text'] * - 0004 - Error - - v2_orifice.discharge_coefficient_positive is not of type ['integer', 'numeric', 'real'] + - pump.capacity is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_orifice.display_name is not of type ['text'] + - pump.code is not of type ['text'] * - 0004 - Error - - v2_orifice.friction_type is not of type ['integer'] + - pump.connection_node_id is not of type ['integer'] * - 0004 - Error - - v2_orifice.friction_value is not of type ['integer', 'numeric', 'real'] + - pump.display_name is not of type ['text'] * - 0004 - Error - - v2_orifice.id is not of type ['integer'] + - pump.geom is not of type ['blob'] * - 0004 - Error - - v2_orifice.sewerage is not of type ['integer'] + - pump.id is not of type ['integer'] * - 0004 - Error - - v2_orifice.zoom_category is not of type ['integer'] + - pump.lower_stop_level is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_pipe.calculation_type is not of type ['integer'] + - pump.sewerage is not of type ['integer'] * - 0004 - Error - - v2_pipe.code is not of type ['text'] + - pump.start_level is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_pipe.connection_node_end_id is not of type ['integer'] + - pump.tags is not of type ['text'] * - 0004 - Error - - v2_pipe.connection_node_start_id is not of type ['integer'] + - pump.type is not of type ['integer'] * - 0004 - Error - - v2_pipe.cross_section_definition_id is not of type ['integer'] + - pump.upper_stop_level is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_pipe.display_name is not of type ['text'] + - pump_map.code is not of type ['text'] * - 0004 - Error - - v2_pipe.dist_calc_points is not of type ['integer', 'numeric', 'real'] + - pump_map.connection_node_id_end is not of type ['integer'] * - 0004 - Error - - v2_pipe.exchange_thickness is not of type ['integer', 'numeric', 'real'] + - pump_map.display_name is not of type ['text'] * - 0004 - Error - - v2_pipe.friction_type is not of type ['integer'] + - pump_map.geom is not of type ['blob'] * - 0004 - Error - - v2_pipe.friction_value is not of type ['integer', 'numeric', 'real'] + - pump_map.id is not of type ['integer'] * - 0004 - Error - - v2_pipe.hydraulic_conductivity_in is not of type ['integer', 'numeric', 'real'] + - pump_map.pump_id is not of type ['integer'] * - 0004 - Error - - v2_pipe.hydraulic_conductivity_out is not of type ['integer', 'numeric', 'real'] + - pump_map.tags is not of type ['text'] * - 0004 - Error - - v2_pipe.id is not of type ['integer'] + - simple_infiltration.id is not of type ['integer'] * - 0004 - Error - - v2_pipe.invert_level_end_point is not of type ['integer', 'numeric', 'real'] + - simple_infiltration.infiltration_rate is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_pipe.invert_level_start_point is not of type ['integer', 'numeric', 'real'] + - simple_infiltration.infiltration_rate_file is not of type ['text'] * - 0004 - Error - - v2_pipe.material is not of type ['integer'] + - simple_infiltration.infiltration_surface_option is not of type ['integer'] * - 0004 - Error - - v2_pipe.original_length is not of type ['integer', 'numeric', 'real'] + - simple_infiltration.max_infiltration_volume is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_pipe.profile_num is not of type ['integer'] + - simple_infiltration.max_infiltration_volume_file is not of type ['text'] * - 0004 - Error - - v2_pipe.sewerage_type is not of type ['integer'] + - simulation_template_settings.id is not of type ['integer'] * - 0004 - Error - - v2_pipe.zoom_category is not of type ['integer'] + - simulation_template_settings.name is not of type ['text'] * - 0004 - Error - - v2_potential_breach.channel_id is not of type ['integer'] + - simulation_template_settings.use_0d_inflow is not of type ['integer'] * - 0004 - Error - - v2_potential_breach.code is not of type ['text'] + - simulation_template_settings.use_structure_control is not of type ['integer'] * - 0004 - Error - - v2_potential_breach.display_name is not of type ['text'] + - surface.area is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_potential_breach.exchange_level is not of type ['integer', 'numeric', 'real'] + - surface.code is not of type ['text'] * - 0004 - Error - - v2_potential_breach.id is not of type ['integer'] + - surface.display_name is not of type ['text'] * - 0004 - Error - - v2_potential_breach.levee_material is not of type ['integer'] + - surface.geom is not of type ['blob'] * - 0004 - Error - - v2_potential_breach.maximum_breach_depth is not of type ['integer', 'numeric', 'real'] + - surface.id is not of type ['integer'] * - 0004 - Error - - v2_potential_breach.the_geom is not of type ['blob'] + - surface.surface_parameters_id is not of type ['integer'] * - 0004 - Error - - v2_pumpstation.capacity is not of type ['integer', 'numeric', 'real'] + - surface.tags is not of type ['text'] * - 0004 - Error - - v2_pumpstation.classification is not of type ['integer'] + - surface_map.code is not of type ['text'] * - 0004 - Error - - v2_pumpstation.code is not of type ['text'] + - surface_map.connection_node_id is not of type ['integer'] * - 0004 - Error - - v2_pumpstation.connection_node_end_id is not of type ['integer'] + - surface_map.display_name is not of type ['text'] * - 0004 - Error - - v2_pumpstation.connection_node_start_id is not of type ['integer'] + - surface_map.geom is not of type ['blob'] * - 0004 - Error - - v2_pumpstation.display_name is not of type ['text'] + - surface_map.id is not of type ['integer'] * - 0004 - Error - - v2_pumpstation.id is not of type ['integer'] + - surface_map.percentage is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_pumpstation.lower_stop_level is not of type ['integer', 'numeric', 'real'] + - surface_map.surface_id is not of type ['integer'] * - 0004 - Error - - v2_pumpstation.sewerage is not of type ['integer'] + - surface_map.tags is not of type ['text'] * - 0004 - Error - - v2_pumpstation.start_level is not of type ['integer', 'numeric', 'real'] + - surface_parameters.description is not of type ['text'] * - 0004 - Error - - v2_pumpstation.type is not of type ['integer'] + - surface_parameters.id is not of type ['integer'] * - 0004 - Error - - v2_pumpstation.upper_stop_level is not of type ['integer', 'numeric', 'real'] + - surface_parameters.infiltration is not of type ['integer'] * - 0004 - Error - - v2_pumpstation.zoom_category is not of type ['integer'] + - surface_parameters.infiltration_decay_constant is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_simple_infiltration.display_name is not of type ['text'] + - surface_parameters.infiltration_recovery_constant is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_simple_infiltration.id is not of type ['integer'] + - surface_parameters.max_infiltration_capacity is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_simple_infiltration.infiltration_rate is not of type ['integer', 'numeric', 'real'] + - surface_parameters.min_infiltration_capacity is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_simple_infiltration.infiltration_rate_file is not of type ['text'] + - surface_parameters.outflow_delay is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_simple_infiltration.infiltration_surface_option is not of type ['integer'] + - surface_parameters.surface_layer_thickness is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_simple_infiltration.max_infiltration_capacity is not of type ['integer', 'numeric', 'real'] + - surface_parameters.tags is not of type ['text'] * - 0004 - Error - - v2_simple_infiltration.max_infiltration_capacity_file is not of type ['text'] + - table_control.action_table is not of type ['text'] * - 0004 - Error - - v2_surface.area is not of type ['integer', 'numeric', 'real'] + - table_control.action_type is not of type ['text'] * - 0004 - Error - - v2_surface.code is not of type ['text'] + - table_control.code is not of type ['text'] * - 0004 - Error - - v2_surface.display_name is not of type ['text'] + - table_control.display_name is not of type ['text'] * - 0004 - Error - - v2_surface.dry_weather_flow is not of type ['integer', 'numeric', 'real'] + - table_control.geom is not of type ['blob'] * - 0004 - Error - - v2_surface.function is not of type ['text'] + - table_control.id is not of type ['integer'] * - 0004 - Error - - v2_surface.id is not of type ['integer'] + - table_control.measure_operator is not of type ['text'] * - 0004 - Error - - v2_surface.nr_of_inhabitants is not of type ['integer', 'numeric', 'real'] + - table_control.tags is not of type ['text'] * - 0004 - Error - - v2_surface.surface_parameters_id is not of type ['integer'] + - table_control.target_id is not of type ['integer'] * - 0004 - Error - - v2_surface.the_geom is not of type ['blob'] + - table_control.target_type is not of type ['text'] * - 0004 - Error - - v2_surface.zoom_category is not of type ['integer'] + - tag.description is not of type ['text'] * - 0004 - Error - - v2_surface_map.connection_node_id is not of type ['integer'] + - tag.id is not of type ['integer'] * - 0004 - Error - - v2_surface_map.id is not of type ['integer'] + - time_step_settings.id is not of type ['integer'] * - 0004 - Error - - v2_surface_map.percentage is not of type ['integer', 'numeric', 'real'] + - time_step_settings.max_time_step is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_surface_map.surface_id is not of type ['integer'] + - time_step_settings.min_time_step is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_surface_parameters.id is not of type ['integer'] + - time_step_settings.output_time_step is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_surface_parameters.infiltration is not of type ['integer'] + - time_step_settings.time_step is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_surface_parameters.infiltration_decay_constant is not of type ['integer', 'numeric', 'real'] + - time_step_settings.use_time_step_stretch is not of type ['integer'] * - 0004 - Error - - v2_surface_parameters.infiltration_recovery_constant is not of type ['integer', 'numeric', 'real'] + - vegetation_drag_2d.id is not of type ['integer'] * - 0004 - Error - - v2_surface_parameters.max_infiltration_capacity is not of type ['integer', 'numeric', 'real'] + - vegetation_drag_2d.vegetation_drag_coefficient is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_surface_parameters.min_infiltration_capacity is not of type ['integer', 'numeric', 'real'] + - vegetation_drag_2d.vegetation_drag_coefficient_file is not of type ['text'] * - 0004 - Error - - v2_surface_parameters.outflow_delay is not of type ['integer', 'numeric', 'real'] + - vegetation_drag_2d.vegetation_height is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_surface_parameters.surface_layer_thickness is not of type ['integer', 'numeric', 'real'] + - vegetation_drag_2d.vegetation_height_file is not of type ['text'] * - 0004 - Error - - v2_vegetation_drag.display_name is not of type ['text'] + - vegetation_drag_2d.vegetation_stem_count is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_vegetation_drag.id is not of type ['integer'] + - vegetation_drag_2d.vegetation_stem_count_file is not of type ['text'] * - 0004 - Error - - v2_vegetation_drag.vegetation_drag_coefficient is not of type ['integer', 'numeric', 'real'] + - vegetation_drag_2d.vegetation_stem_diameter is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_vegetation_drag.vegetation_drag_coefficient_file is not of type ['text'] + - vegetation_drag_2d.vegetation_stem_diameter_file is not of type ['text'] * - 0004 - Error - - v2_vegetation_drag.vegetation_height is not of type ['integer', 'numeric', 'real'] + - weir.code is not of type ['text'] * - 0004 - Error - - v2_vegetation_drag.vegetation_height_file is not of type ['text'] + - weir.connection_node_id_end is not of type ['integer'] * - 0004 - Error - - v2_vegetation_drag.vegetation_stem_count is not of type ['integer', 'numeric', 'real'] + - weir.connection_node_id_start is not of type ['integer'] * - 0004 - Error - - v2_vegetation_drag.vegetation_stem_count_file is not of type ['text'] + - weir.crest_level is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_vegetation_drag.vegetation_stem_diameter is not of type ['integer', 'numeric', 'real'] + - weir.crest_type is not of type ['integer'] * - 0004 - Error - - v2_vegetation_drag.vegetation_stem_diameter_file is not of type ['text'] + - weir.cross_section_height is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_weir.code is not of type ['text'] + - weir.cross_section_shape is not of type ['integer'] * - 0004 - Error - - v2_weir.connection_node_end_id is not of type ['integer'] + - weir.cross_section_table is not of type ['text'] * - 0004 - Error - - v2_weir.connection_node_start_id is not of type ['integer'] + - weir.cross_section_width is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_weir.crest_level is not of type ['integer', 'numeric', 'real'] + - weir.discharge_coefficient_negative is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_weir.crest_type is not of type ['integer'] + - weir.discharge_coefficient_positive is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_weir.cross_section_definition_id is not of type ['integer'] + - weir.display_name is not of type ['text'] * - 0004 - Error - - v2_weir.discharge_coefficient_negative is not of type ['integer', 'numeric', 'real'] + - weir.external is not of type ['integer'] * - 0004 - Error - - v2_weir.discharge_coefficient_positive is not of type ['integer', 'numeric', 'real'] + - weir.friction_type is not of type ['integer'] * - 0004 - Error - - v2_weir.display_name is not of type ['text'] + - weir.friction_value is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_weir.external is not of type ['integer'] + - weir.geom is not of type ['blob'] * - 0004 - Error - - v2_weir.friction_type is not of type ['integer'] + - weir.id is not of type ['integer'] * - 0004 - Error - - v2_weir.friction_value is not of type ['integer', 'numeric', 'real'] + - weir.material_id is not of type ['integer'] * - 0004 - Error - - v2_weir.id is not of type ['integer'] + - weir.sewerage is not of type ['integer'] * - 0004 - Error - - v2_weir.sewerage is not of type ['integer'] + - weir.tags is not of type ['text'] * - 0004 - Error - - v2_weir.zoom_category is not of type ['integer'] + - windshielding_1d.channel_id is not of type ['integer'] * - 0004 - Error - - v2_windshielding.channel_id is not of type ['integer'] + - windshielding_1d.east is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_windshielding.east is not of type ['integer', 'numeric', 'real'] + - windshielding_1d.geom is not of type ['blob'] * - 0004 - Error - - v2_windshielding.id is not of type ['integer'] + - windshielding_1d.id is not of type ['integer'] * - 0004 - Error - - v2_windshielding.north is not of type ['integer', 'numeric', 'real'] + - windshielding_1d.north is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_windshielding.northeast is not of type ['integer', 'numeric', 'real'] + - windshielding_1d.northeast is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_windshielding.northwest is not of type ['integer', 'numeric', 'real'] + - windshielding_1d.northwest is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_windshielding.south is not of type ['integer', 'numeric', 'real'] + - windshielding_1d.south is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_windshielding.southeast is not of type ['integer', 'numeric', 'real'] + - windshielding_1d.southeast is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_windshielding.southwest is not of type ['integer', 'numeric', 'real'] + - windshielding_1d.southwest is not of type ['integer', 'numeric', 'real'] * - 0004 - Error - - v2_windshielding.the_geom is not of type ['blob'] + - windshielding_1d.tags is not of type ['text'] * - 0004 - Error - - v2_windshielding.west is not of type ['integer', 'numeric', 'real'] + - windshielding_1d.west is not of type ['integer', 'numeric', 'real'] * - 0005 - Error - - v2_2d_boundary_conditions.the_geom is an invalid geometry + - boundary_condition_1d.geom is an invalid geometry * - 0005 - Error - - v2_2d_lateral.the_geom is an invalid geometry + - boundary_condition_2d.geom is an invalid geometry * - 0005 - Error - - v2_channel.the_geom is an invalid geometry + - channel.geom is an invalid geometry * - 0005 - Error - - v2_connection_nodes.the_geom is an invalid geometry + - connection_node.geom is an invalid geometry * - 0005 - Error - - v2_connection_nodes.the_geom_linestring is an invalid geometry + - cross_section_location.geom is an invalid geometry * - 0005 - Error - - v2_cross_section_location.the_geom is an invalid geometry + - culvert.geom is an invalid geometry * - 0005 - - Error - - v2_culvert.the_geom is an invalid geometry + - Warning + - dem_average_area.geom is an invalid geometry * - 0005 - Warning - - v2_dem_average_area.the_geom is an invalid geometry + - dry_weather_flow.geom is an invalid geometry * - 0005 - Error - - v2_exchange_line.the_geom is an invalid geometry + - dry_weather_flow_map.geom is an invalid geometry * - 0005 - Error - - v2_floodfill.the_geom is an invalid geometry + - exchange_line.geom is an invalid geometry * - 0005 - Warning - - v2_grid_refinement.the_geom is an invalid geometry + - grid_refinement_area.geom is an invalid geometry * - 0005 - Warning - - v2_grid_refinement_area.the_geom is an invalid geometry + - grid_refinement_line.geom is an invalid geometry * - 0005 - - Warning - - v2_impervious_surface.the_geom is an invalid geometry + - Error + - lateral_1d.geom is an invalid geometry + * - 0005 + - Error + - lateral_2d.geom is an invalid geometry + * - 0005 + - Error + - measure_location.geom is an invalid geometry + * - 0005 + - Error + - measure_map.geom is an invalid geometry + * - 0005 + - Error + - memory_control.geom is an invalid geometry + * - 0005 + - Error + - obstacle.geom is an invalid geometry * - 0005 - Error - - v2_obstacle.the_geom is an invalid geometry + - orifice.geom is an invalid geometry * - 0005 - Error - - v2_potential_breach.the_geom is an invalid geometry + - pipe.geom is an invalid geometry + * - 0005 + - Error + - potential_breach.geom is an invalid geometry + * - 0005 + - Error + - pump.geom is an invalid geometry + * - 0005 + - Error + - pump_map.geom is an invalid geometry * - 0005 - Warning - - v2_surface.the_geom is an invalid geometry + - surface.geom is an invalid geometry + * - 0005 + - Error + - surface_map.geom is an invalid geometry * - 0005 - Error - - v2_windshielding.the_geom is an invalid geometry + - table_control.geom is an invalid geometry + * - 0005 + - Error + - weir.geom is an invalid geometry + * - 0005 + - Error + - windshielding_1d.geom is an invalid geometry * - 0006 - Error - - v2_2d_boundary_conditions.the_geom has invalid geometry type, expected LINESTRING + - boundary_condition_1d.geom has invalid geometry type, expected POINT * - 0006 - Error - - v2_2d_lateral.the_geom has invalid geometry type, expected POINT + - boundary_condition_2d.geom has invalid geometry type, expected LINESTRING * - 0006 - Error - - v2_channel.the_geom has invalid geometry type, expected LINESTRING + - channel.geom has invalid geometry type, expected LINESTRING * - 0006 - Error - - v2_connection_nodes.the_geom has invalid geometry type, expected POINT + - connection_node.geom has invalid geometry type, expected POINT * - 0006 - Error - - v2_connection_nodes.the_geom_linestring has invalid geometry type, expected LINESTRING + - cross_section_location.geom has invalid geometry type, expected POINT * - 0006 - Error - - v2_cross_section_location.the_geom has invalid geometry type, expected POINT + - culvert.geom has invalid geometry type, expected LINESTRING * - 0006 - Error - - v2_culvert.the_geom has invalid geometry type, expected LINESTRING + - dem_average_area.geom has invalid geometry type, expected POLYGON * - 0006 - Error - - v2_dem_average_area.the_geom has invalid geometry type, expected POLYGON + - dry_weather_flow.geom has invalid geometry type, expected POLYGON * - 0006 - Error - - v2_exchange_line.the_geom has invalid geometry type, expected LINESTRING + - dry_weather_flow_map.geom has invalid geometry type, expected LINESTRING * - 0006 - Error - - v2_floodfill.the_geom has invalid geometry type, expected POINT + - exchange_line.geom has invalid geometry type, expected LINESTRING * - 0006 - Error - - v2_grid_refinement.the_geom has invalid geometry type, expected LINESTRING + - grid_refinement_area.geom has invalid geometry type, expected POLYGON * - 0006 - Error - - v2_grid_refinement_area.the_geom has invalid geometry type, expected POLYGON + - grid_refinement_line.geom has invalid geometry type, expected LINESTRING * - 0006 - Error - - v2_impervious_surface.the_geom has invalid geometry type, expected GEOMETRY + - lateral_1d.geom has invalid geometry type, expected POINT * - 0006 - Error - - v2_obstacle.the_geom has invalid geometry type, expected LINESTRING + - lateral_2d.geom has invalid geometry type, expected POINT * - 0006 - Error - - v2_potential_breach.the_geom has invalid geometry type, expected LINESTRING + - measure_location.geom has invalid geometry type, expected POINT * - 0006 - Error - - v2_surface.the_geom has invalid geometry type, expected GEOMETRY + - measure_map.geom has invalid geometry type, expected LINESTRING * - 0006 - Error - - v2_windshielding.the_geom has invalid geometry type, expected POINT - * - 0007 + - memory_control.geom has invalid geometry type, expected POINT + * - 0006 - Error - - v2_1d_boundary_conditions.boundary_type is not one of [1, 2, 3, 4, 5, 6, 7] - * - 0007 + - obstacle.geom has invalid geometry type, expected LINESTRING + * - 0006 - Error - - v2_2d_boundary_conditions.boundary_type is not one of [1, 2, 3, 4, 5, 6, 7] - * - 0007 + - orifice.geom has invalid geometry type, expected LINESTRING + * - 0006 - Error - - v2_2d_lateral.type is not one of [1] - * - 0007 + - pipe.geom has invalid geometry type, expected LINESTRING + * - 0006 - Error - - v2_aggregation_settings.aggregation_method is not one of ['avg', 'cum', 'cum_negative', 'cum_positive', 'current', 'max', 'min', 'sum'] - * - 0007 + - potential_breach.geom has invalid geometry type, expected LINESTRING + * - 0006 - Error - - v2_aggregation_settings.flow_variable is not one of ['discharge', 'flow_velocity', 'interception', 'lateral_discharge', 'leakage', 'pump_discharge', 'rain', 'simple_infiltration', 'surface_source_sink_discharge', 'volume', 'waterlevel', 'wet_cross-section', 'wet_surface'] - * - 0007 + - pump.geom has invalid geometry type, expected POINT + * - 0006 - Error - - v2_channel.calculation_type is not one of [100, 101, 102, 105] - * - 0007 - - Info - - v2_channel.zoom_category is not one of [0, 1, 2, 3, 4, 5] - * - 0007 + - pump_map.geom has invalid geometry type, expected LINESTRING + * - 0006 - Error - - v2_control.control_type is not one of ['memory', 'table'] - * - 0007 + - surface.geom has invalid geometry type, expected POLYGON + * - 0006 + - Error + - surface_map.geom has invalid geometry type, expected LINESTRING + * - 0006 - Error - - v2_control_measure_map.object_type is not one of ['v2_connection_nodes'] + - table_control.geom has invalid geometry type, expected POINT + * - 0006 + - Error + - weir.geom has invalid geometry type, expected LINESTRING + * - 0006 + - Error + - windshielding_1d.geom has invalid geometry type, expected POINT * - 0007 - Error - - v2_control_memory.action_type is not one of ['set_capacity', 'set_crest_level', 'set_discharge_coefficients', 'set_gate_level', 'set_pump_capacity'] + - aggregation_settings.aggregation_method is not one of ['avg', 'cum', 'cum_negative', 'cum_positive', 'current', 'max', 'min', 'sum'] * - 0007 - Error - - v2_control_memory.measure_variable is not one of ['discharge', 'velocity', 'volume', 'waterlevel'] + - aggregation_settings.flow_variable is not one of ['discharge', 'flow_velocity', 'interception', 'lateral_discharge', 'leakage', 'pump_discharge', 'rain', 'simple_infiltration', 'surface_source_sink_discharge', 'volume', 'water_level', 'wet_cross_section', 'wet_surface'] * - 0007 - Error - - v2_control_memory.target_type is not one of ['v2_channel', 'v2_culvert', 'v2_orifice', 'v2_pipe', 'v2_pumpstation', 'v2_weir'] + - boundary_condition_1d.type is not one of [1, 2, 3, 4, 5, 6, 7] * - 0007 - Error - - v2_control_table.action_type is not one of ['set_capacity', 'set_crest_level', 'set_discharge_coefficients', 'set_gate_level', 'set_pump_capacity'] + - boundary_condition_2d.type is not one of [1, 2, 3, 4, 5, 6, 7] * - 0007 - Error - - v2_control_table.measure_operator is not one of ['<', '<=', '>', '>='] + - channel.exchange_type is not one of [100, 101, 102, 105] * - 0007 - Error - - v2_control_table.measure_variable is not one of ['discharge', 'velocity', 'volume', 'waterlevel'] + - connection_node.exchange_type is not one of [0, 1, 2] * - 0007 - Error - - v2_control_table.target_type is not one of ['v2_channel', 'v2_culvert', 'v2_orifice', 'v2_pipe', 'v2_pumpstation', 'v2_weir'] + - cross_section_location.cross_section_shape is not one of [0, 1, 2, 3, 5, 6, 7, 8] * - 0007 - Error - - v2_control_timed.action_type is not one of ['set_capacity', 'set_crest_level', 'set_discharge_coefficients', 'set_gate_level', 'set_pump_capacity'] + - cross_section_location.friction_type is not one of [1, 2, 3, 4] * - 0007 - Error - - v2_control_timed.target_type is not one of ['v2_channel', 'v2_culvert', 'v2_orifice', 'v2_pipe', 'v2_pumpstation', 'v2_weir'] + - culvert.cross_section_shape is not one of [0, 1, 2, 3, 5, 6, 7, 8] * - 0007 - Error - - v2_cross_section_definition.shape is not one of [0, 1, 2, 3, 5, 6, 7, 8] + - culvert.exchange_type is not one of [0, 1, 2, 100, 101, 102, 105] * - 0007 - Error - - v2_cross_section_location.friction_type is not one of [1, 2, 3, 4] + - culvert.friction_type is not one of [1, 2, 3, 4] * - 0007 - Error - - v2_culvert.calculation_type is not one of [0, 1, 2, 100, 101, 102, 105] + - groundwater.equilibrium_infiltration_rate_aggregation is not one of [0, 1, 2] * - 0007 - Error - - v2_culvert.friction_type is not one of [1, 2, 3, 4] + - groundwater.groundwater_hydraulic_conductivity_aggregation is not one of [0, 1, 2] * - 0007 - - Info - - v2_culvert.zoom_category is not one of [0, 1, 2, 3, 4, 5] + - Error + - groundwater.groundwater_impervious_layer_level_aggregation is not one of [0, 1, 2] * - 0007 - Error - - v2_global_settings.advection_1d is not one of [0, 1] + - groundwater.infiltration_decay_period_aggregation is not one of [0, 1, 2] * - 0007 - Error - - v2_global_settings.advection_2d is not one of [0, 1] + - groundwater.initial_infiltration_rate_aggregation is not one of [0, 1, 2] * - 0007 - Error - - v2_global_settings.frict_avg is not one of [0, 1] + - groundwater.phreatic_storage_capacity_aggregation is not one of [0, 1, 2] * - 0007 - Error - - v2_global_settings.frict_type is not one of [1, 2, 3, 4] + - initial_conditions.initial_groundwater_level_aggregation is not one of [0, 1, 2] * - 0007 - Error - - v2_global_settings.initial_groundwater_level_type is not one of [0, 1, 2] + - initial_conditions.initial_water_level_aggregation is not one of [0, 1, 2] * - 0007 - Error - - v2_global_settings.use_0d_inflow is not one of [0, 1, 2] + - interflow.interflow_type is not one of [0, 1, 2, 3, 4] * - 0007 - Error - - v2_global_settings.water_level_ini_type is not one of [0, 1, 2] + - lateral_2d.type is not one of [1] * - 0007 - Error - - v2_groundwater.equilibrium_infiltration_rate_type is not one of [0, 1, 2] + - material.friction_type is not one of [1, 2, 3, 4] * - 0007 - Error - - v2_groundwater.groundwater_hydro_connectivity_type is not one of [0, 1, 2] + - measure_location.measure_variable is not one of ['discharge', 'velocity', 'volume', 'water_level'] * - 0007 - Error - - v2_groundwater.groundwater_impervious_layer_level_type is not one of [0, 1, 2] + - measure_map.control_type is not one of ['memory', 'table'] * - 0007 - Error - - v2_groundwater.infiltration_decay_period_type is not one of [0, 1, 2] + - memory_control.action_type is not one of ['set_capacity', 'set_crest_level', 'set_discharge_coefficients', 'set_gate_level', 'set_pump_capacity'] * - 0007 - Error - - v2_groundwater.initial_infiltration_rate_type is not one of [0, 1, 2] + - memory_control.target_type is not one of ['channel', 'culvert', 'orifice', 'pipe', 'pump', 'weir'] * - 0007 - Error - - v2_groundwater.phreatic_storage_capacity_type is not one of [0, 1, 2] + - model_settings.friction_type is not one of [1, 2, 3, 4] * - 0007 - Error - - v2_impervious_surface.surface_class is not one of ['gesloten verharding', 'half verhard', 'onverhard', 'open verharding', 'pand'] + - model_settings.node_open_water_detection is not one of [0, 1] * - 0007 - Error - - v2_impervious_surface.surface_inclination is not one of ['hellend', 'uitgestrekt', 'vlak'] + - numerical_settings.friction_shallow_water_depth_correction is not one of [0, 1, 2, 3] * - 0007 - - Info - - v2_impervious_surface.zoom_category is not one of [0, 1, 2, 3, 4, 5] + - Error + - numerical_settings.limiter_slope_crossectional_area_2d is not one of [0, 1, 2, 3] * - 0007 - Error - - v2_interflow.interflow_type is not one of [0, 1, 2, 3, 4] + - numerical_settings.limiter_slope_friction_2d is not one of [0, 1] * - 0007 - Error - - v2_manhole.calculation_type is not one of [0, 1, 2] + - numerical_settings.limiter_waterlevel_gradient_1d is not one of [0, 1] * - 0007 - - Info - - v2_manhole.zoom_category is not one of [0, 1, 2, 3, 4, 5] + - Error + - numerical_settings.limiter_waterlevel_gradient_2d is not one of [0, 1] * - 0007 - Error - - v2_numerical_settings.frict_shallow_water_correction is not one of [0, 1, 2, 3] + - numerical_settings.time_integration_method is not one of [0] * - 0007 - Error - - v2_numerical_settings.integration_method is not one of [0] + - numerical_settings.use_nested_newton is not one of [0, 1] * - 0007 - Error - - v2_numerical_settings.limiter_grad_1d is not one of [0, 1] + - numerical_settings.use_preconditioner_cg is not one of [0, 1] * - 0007 - Error - - v2_numerical_settings.limiter_grad_2d is not one of [0, 1] + - orifice.crest_type is not one of [3, 4] * - 0007 - Error - - v2_numerical_settings.limiter_slope_crossectional_area_2d is not one of [0, 1, 2, 3] + - orifice.cross_section_shape is not one of [0, 1, 2, 3, 5, 6, 7, 8] * - 0007 - Error - - v2_numerical_settings.limiter_slope_friction_2d is not one of [0, 1] + - orifice.friction_type is not one of [1, 2, 3, 4] * - 0007 - Error - - v2_numerical_settings.precon_cg is not one of [0, 1] + - physical_settings.use_advection_1d is not one of [0, 1, 2, 3] * - 0007 - Error - - v2_numerical_settings.use_of_nested_newton is not one of [0, 1] + - pipe.cross_section_shape is not one of [0, 1, 2, 3, 5, 6, 7, 8] * - 0007 - Error - - v2_orifice.crest_type is not one of [3, 4] + - pipe.exchange_type is not one of [0, 1, 2, 3, 4] * - 0007 - Error - - v2_orifice.friction_type is not one of [1, 2, 3, 4] + - pipe.friction_type is not one of [1, 2, 3, 4] * - 0007 - Info - - v2_orifice.zoom_category is not one of [0, 1, 2, 3, 4, 5] + - pipe.sewerage_type is not one of [0, 1, 2, 3, 4, 5, 6, 7] * - 0007 - Error - - v2_pipe.calculation_type is not one of [0, 1, 2, 3, 4] + - potential_breach.levee_material is not one of [1, 2] * - 0007 - Error - - v2_pipe.friction_type is not one of [1, 2, 3, 4] - * - 0007 - - Info - - v2_pipe.sewerage_type is not one of [0, 1, 2, 3, 4, 5, 6, 7] - * - 0007 - - Info - - v2_pipe.zoom_category is not one of [0, 1, 2, 3, 4, 5] + - pump.type is not one of [1, 2] * - 0007 - Error - - v2_potential_breach.levee_material is not one of [1, 2] + - simple_infiltration.infiltration_surface_option is not one of [0, 1, 2] * - 0007 - Error - - v2_pumpstation.type is not one of [1, 2] + - simulation_template_settings.use_0d_inflow is not one of [0, 1, 2] * - 0007 - - Info - - v2_pumpstation.zoom_category is not one of [0, 1, 2, 3, 4, 5] + - Error + - table_control.action_type is not one of ['set_capacity', 'set_crest_level', 'set_discharge_coefficients', 'set_gate_level', 'set_pump_capacity'] * - 0007 - Error - - v2_simple_infiltration.infiltration_surface_option is not one of [0, 1, 2] + - table_control.measure_operator is not one of ['<', '<=', '>', '>='] * - 0007 - - Info - - v2_surface.zoom_category is not one of [0, 1, 2, 3, 4, 5] + - Error + - table_control.target_type is not one of ['channel', 'culvert', 'orifice', 'pipe', 'pump', 'weir'] * - 0007 - Error - - v2_weir.crest_type is not one of [3, 4] + - weir.crest_type is not one of [3, 4] * - 0007 - Error - - v2_weir.friction_type is not one of [1, 2, 3, 4] + - weir.cross_section_shape is not one of [0, 1, 2, 3, 5, 6, 7, 8] * - 0007 - - Info - - v2_weir.zoom_category is not one of [0, 1, 2, 3, 4, 5] + - Error + - weir.friction_type is not one of [1, 2, 3, 4] * - 0008 - Error - id must be a positive signed 32-bit integer. @@ -2429,1515 +2468,1998 @@ * - 0008 - Error - id must be a positive signed 32-bit integer. + * - 0008 + - Error + - id must be a positive signed 32-bit integer. + * - 0009 + - Error + - The epsg of boundary_condition_1d.boundary_condition_1d.geom should match + * - 0009 + - Error + - The epsg of boundary_condition_2d.boundary_condition_2d.geom should match + * - 0009 + - Error + - The epsg of channel.channel.geom should match + * - 0009 + - Error + - The epsg of connection_node.connection_node.geom should match + * - 0009 + - Error + - The epsg of cross_section_location.cross_section_location.geom should match + * - 0009 + - Error + - The epsg of culvert.culvert.geom should match + * - 0009 + - Error + - The epsg of dem_average_area.dem_average_area.geom should match + * - 0009 + - Error + - The epsg of dry_weather_flow.dry_weather_flow.geom should match + * - 0009 + - Error + - The epsg of dry_weather_flow_map.dry_weather_flow_map.geom should match + * - 0009 + - Error + - The epsg of exchange_line.exchange_line.geom should match + * - 0009 + - Error + - The epsg of grid_refinement_area.grid_refinement_area.geom should match + * - 0009 + - Error + - The epsg of grid_refinement_line.grid_refinement_line.geom should match + * - 0009 + - Error + - The epsg of lateral_1d.lateral_1d.geom should match + * - 0009 + - Error + - The epsg of lateral_2d.lateral_2d.geom should match + * - 0009 + - Error + - The epsg of measure_location.measure_location.geom should match + * - 0009 + - Error + - The epsg of measure_map.measure_map.geom should match + * - 0009 + - Error + - The epsg of memory_control.memory_control.geom should match + * - 0009 + - Error + - The epsg of obstacle.obstacle.geom should match + * - 0009 + - Error + - The epsg of orifice.orifice.geom should match + * - 0009 + - Error + - The epsg of pipe.pipe.geom should match + * - 0009 + - Error + - The epsg of potential_breach.potential_breach.geom should match + * - 0009 + - Error + - The epsg of pump.pump.geom should match + * - 0009 + - Error + - The epsg of pump_map.pump_map.geom should match + * - 0009 + - Error + - The epsg of surface.surface.geom should match + * - 0009 + - Error + - The epsg of surface_map.surface_map.geom should match + * - 0009 + - Error + - The epsg of table_control.table_control.geom should match + * - 0009 + - Error + - The epsg of weir.weir.geom should match + * - 0009 + - Error + - The epsg of windshielding_1d.windshielding_1d.geom should match + * - 0010 + - Error + - The file in groundwater.equilibrium_infiltration_rate_file has no EPSG code or the EPSG code does not match does not match + * - 0010 + - Error + - The file in groundwater.groundwater_hydraulic_conductivity_file has no EPSG code or the EPSG code does not match does not match + * - 0010 + - Error + - The file in groundwater.groundwater_impervious_layer_level_file has no EPSG code or the EPSG code does not match does not match + * - 0010 + - Error + - The file in groundwater.infiltration_decay_period_file has no EPSG code or the EPSG code does not match does not match + * - 0010 + - Error + - The file in groundwater.initial_infiltration_rate_file has no EPSG code or the EPSG code does not match does not match + * - 0010 + - Error + - The file in groundwater.leakage_file has no EPSG code or the EPSG code does not match does not match + * - 0010 + - Error + - The file in groundwater.phreatic_storage_capacity_file has no EPSG code or the EPSG code does not match does not match + * - 0010 + - Error + - The file in initial_conditions.initial_groundwater_level_file has no EPSG code or the EPSG code does not match does not match + * - 0010 + - Error + - The file in initial_conditions.initial_water_level_file has no EPSG code or the EPSG code does not match does not match + * - 0010 + - Error + - The file in interception.interception_file has no EPSG code or the EPSG code does not match does not match + * - 0010 + - Error + - The file in interflow.hydraulic_conductivity_file has no EPSG code or the EPSG code does not match does not match + * - 0010 + - Error + - The file in interflow.porosity_file has no EPSG code or the EPSG code does not match does not match + * - 0010 + - Error + - The file in model_settings.dem_file has no EPSG code or the EPSG code does not match does not match + * - 0010 + - Error + - The file in model_settings.friction_coefficient_file has no EPSG code or the EPSG code does not match does not match + * - 0010 + - Error + - The file in simple_infiltration.infiltration_rate_file has no EPSG code or the EPSG code does not match does not match + * - 0010 + - Error + - The file in simple_infiltration.max_infiltration_volume_file has no EPSG code or the EPSG code does not match does not match + * - 0010 + - Error + - The file in vegetation_drag_2d.vegetation_drag_coefficient_file has no EPSG code or the EPSG code does not match does not match + * - 0010 + - Error + - The file in vegetation_drag_2d.vegetation_height_file has no EPSG code or the EPSG code does not match does not match + * - 0010 + - Error + - The file in vegetation_drag_2d.vegetation_stem_count_file has no EPSG code or the EPSG code does not match does not match + * - 0010 + - Error + - The file in vegetation_drag_2d.vegetation_stem_diameter_file has no EPSG code or the EPSG code does not match does not match * - 0020 - Error - CrossSectionLocation.friction_value cannot be null or empty * - 0021 - Error - - v2_cross_section_location.friction_value is <0 + - cross_section_location.friction_value is <0 * - 0021 - Error - - v2_culvert.friction_value is <0 + - culvert.friction_value is <0 * - 0021 - Error - - v2_orifice.friction_value is <0 + - orifice.friction_value is <0 * - 0021 - Error - - v2_pipe.friction_value is <0 + - pipe.friction_value is <0 * - 0021 - Error - - v2_weir.friction_value is <0 + - weir.friction_value is <0 * - 0022 - Warning - - v2_cross_section_location.friction_value is not less than 1 while MANNING friction is selected. CHEZY friction will be used instead. In the future this will lead to an error. + - cross_section_location.friction_value is not less than 1 while MANNING friction is selected. CHEZY friction will be used instead. In the future this will lead to an error. * - 0022 - Warning - - v2_culvert.friction_value is not less than 1 while MANNING friction is selected. CHEZY friction will be used instead. In the future this will lead to an error. + - culvert.friction_value is not less than 1 while MANNING friction is selected. CHEZY friction will be used instead. In the future this will lead to an error. * - 0022 - Warning - - v2_pipe.friction_value is not less than 1 while MANNING friction is selected. CHEZY friction will be used instead. In the future this will lead to an error. + - pipe.friction_value is not less than 1 while MANNING friction is selected. CHEZY friction will be used instead. In the future this will lead to an error. * - 0023 - Warning - - v2_orifice.friction_value is not less than 1 while MANNING friction is selected. CHEZY friction will be used instead. In the future this will lead to an error. + - orifice.friction_value is not less than 1 while MANNING friction is selected. CHEZY friction will be used instead. In the future this will lead to an error. * - 0023 - Warning - - v2_weir.friction_value is not less than 1 while MANNING friction is selected. CHEZY friction will be used instead. In the future this will lead to an error. + - weir.friction_value is not less than 1 while MANNING friction is selected. CHEZY friction will be used instead. In the future this will lead to an error. + * - 0024 + - Error + - culvert.friction_value cannot be null + * - 0024 + - Error + - orifice.friction_value cannot be null * - 0024 - Error - - v2_orifice.friction_value cannot be null + - pipe.friction_value cannot be null * - 0024 - Error - - v2_weir.friction_value cannot be null + - weir.friction_value cannot be null + * - 0025 + - Error + - culvert.friction_type cannot be null + * - 0025 + - Error + - orifice.friction_type cannot be null * - 0025 - Error - - v2_orifice.friction_type cannot be null + - pipe.friction_type cannot be null * - 0025 - Error - - v2_weir.friction_type cannot be null + - weir.friction_type cannot be null * - 0026 - Error - - Friction with conveyance, such as chezy_conveyance and manning_conveyance, may only be used with v2_cross_section_location + - Friction with conveyance, such as chezy_conveyance and manning_conveyance, may only be used with cross_section_location * - 0026 - Error - - Friction with conveyance, such as chezy_conveyance and manning_conveyance, may only be used with v2_cross_section_location + - Friction with conveyance, such as chezy_conveyance and manning_conveyance, may only be used with cross_section_location * - 0026 - Error - - Friction with conveyance, such as chezy_conveyance and manning_conveyance, may only be used with v2_cross_section_location + - Friction with conveyance, such as chezy_conveyance and manning_conveyance, may only be used with cross_section_location * - 0026 - Error - - Friction with conveyance, such as chezy_conveyance and manning_conveyance, may only be used with v2_cross_section_location + - Friction with conveyance, such as chezy_conveyance and manning_conveyance, may only be used with cross_section_location * - 0027 - Error - - in v2_cross_section_location, friction with conveyance, such as chezy_conveyance and manning_conveyance, may only be used with tabulated rectangle (5), tabulated trapezium (6), or tabulated yz (7) shapes + - in cross_section_location, friction with conveyance, such as chezy_conveyance and manning_conveyance, may only be used with tabulated rectangle (5), tabulated trapezium (6), or tabulated yz (7) shapes + * - 0028 + - Error + - cross_section_location.friction_type can only have conveyance if the associated definition is an open shape, and its width is monotonically increasing + * - 0028 + - Error + - culvert.id should contain 1 value for each element; len(culvert.id) = len(width)-1 + * - 0028 + - Error + - orifice.id should contain 1 value for each element; len(orifice.id) = len(width)-1 + * - 0028 + - Error + - pipe.id should contain 1 value for each element; len(pipe.id) = len(width)-1 * - 0028 - Error - - v2_cross_section_location.friction_type can only have conveyance if the associated definition is an open shape, and its width is monotonically increasing + - weir.id should contain 1 value for each element; len(weir.id) = len(width)-1 * - 0031 - Error - - v2_channel.calculation_type cannot be CalculationType.EMBEDDED, CalculationType.CONNECTED or CalculationType.DOUBLE_CONNECTED when v2_global_settings.dem_file is null + - channel.exchange_type cannot be CalculationType.EMBEDDED, CalculationType.CONNECTED or CalculationType.DOUBLE_CONNECTED when model_settings.dem_file is null * - 0041 - Error - - v2_culvert.discharge_coefficient_negative is <0 + - culvert.discharge_coefficient_negative is <0 * - 0041 - Error - - v2_orifice.discharge_coefficient_negative is <0 + - orifice.discharge_coefficient_negative is <0 * - 0041 - Error - - v2_weir.discharge_coefficient_negative is <0 + - weir.discharge_coefficient_negative is <0 * - 0042 - Error - - v2_culvert.discharge_coefficient_positive is <0 + - culvert.discharge_coefficient_positive is <0 * - 0042 - Error - - v2_orifice.discharge_coefficient_positive is <0 + - orifice.discharge_coefficient_positive is <0 * - 0042 - Error - - v2_weir.discharge_coefficient_positive is <0 + - weir.discharge_coefficient_positive is <0 * - 0043 - Warning - - v2_channel.dist_calc_points is not greater than 0, in the future this will lead to an error + - channel.calculation_point_distance is not greater than 0, in the future this will lead to an error * - 0043 - Warning - - v2_culvert.dist_calc_points is not greater than 0, in the future this will lead to an error + - culvert.calculation_point_distance is not greater than 0, in the future this will lead to an error * - 0043 - Warning - - v2_pipe.dist_calc_points is not greater than 0, in the future this will lead to an error + - pipe.calculation_point_distance is not greater than 0, in the future this will lead to an error + * - 0044 + - Warning + - channel.calculation_point_distance should preferably be at least 5.0 metres to prevent simulation timestep reduction. * - 0044 - Error - - v2_connection_nodes.storage_area is not greater than or equal to 0 - * - 0045 + - connection_node.storage_area for manhole connection node should greater than or equal to 0 + * - 0044 - Warning - - v2_channel.dist_calc_points should preferably be at least 5.0 metres to prevent simulation timestep reduction. - * - 0045 + - culvert.calculation_point_distance should preferably be at least 5.0 metres to prevent simulation timestep reduction. + * - 0044 - Warning - - v2_culvert.dist_calc_points should preferably be at least 5.0 metres to prevent simulation timestep reduction. + - pipe.calculation_point_distance should preferably be at least 5.0 metres to prevent simulation timestep reduction. * - 0045 + - Future_error + - connection_node.storage_area should be defined and greater than 0 if the connection nodes has no connections to channels, culverts, pipes, weirs, or orifices0. From September 2025 onwards, this will be an ERROR. + * - 0046 + - Error + - A connection node that is not connected to a pipe, channel, culvert, weir, or orifice must have a defined bottom_level. + * - 0047 + - Future_error + - connection_node.storage_area for a node that is connected to a weir or an orifice, and that has exchange type CONNECTED or ISOLATED should be defined and greater than 0. From September 2025 onwards, this will be an ERROR. + * - 0048 + - Error + - connection_node.bottom_level for a node that is connected to a weir or an orifice, and that has exchange type CONNECTED or ISOLATED should be defined + * - 0049 + - Warning + - connection_node.bottom_level for a node that is connected to a pipe or a culvert, and that is not connected to a channel should be defined. In the future, this will lead to an error. + * - 0050 - Warning - - v2_pipe.dist_calc_points should preferably be at least 5.0 metres to prevent simulation timestep reduction. - * - 0052 + - connection_node.storage_area for a node that is connected to a pipe or a culvert, and that is not connected to a channel should be defined and greater than 0In the future, this will lead to an error. + * - 0053 + - Warning + - cross_section_location.id has a closed cross section definition while NumericalSettings.use_nested_newton is switched off. This gives convergence issues. We recommend setting use_nested_newton = 1. + * - 0053 + - Warning + - culvert.id has a closed cross section definition while NumericalSettings.use_nested_newton is switched off. This gives convergence issues. We recommend setting use_nested_newton = 1. + * - 0053 + - Warning + - orifice.id has a closed cross section definition while NumericalSettings.use_nested_newton is switched off. This gives convergence issues. We recommend setting use_nested_newton = 1. + * - 0053 - Warning - - v2_cross_section_location.the_geom is invalid: the cross-section location should be located on the channel geometry (tolerance = 1.0 m) + - pipe.id has a closed cross section definition while NumericalSettings.use_nested_newton is switched off. This gives convergence issues. We recommend setting use_nested_newton = 1. * - 0053 - Warning - - v2_cross_section_definition.id has a closed cross section definition while NumericalSettings.use_of_nested_newton is switched off. This gives convergence issues. We recommend setting use_of_nested_newton = 1. + - weir.id has a closed cross section definition while NumericalSettings.use_nested_newton is switched off. This gives convergence issues. We recommend setting use_nested_newton = 1. * - 0054 - Warning - - v2_cross_section_location.bank_level will be ignored if it is below the reference_level + - cross_section_location.bank_level will be ignored if it is below the reference_level * - 0055 - Error - - v2_channel has no cross section locations + - channel has no cross section locations * - 0056 - Error - - v2_channel.id has both open and closed cross-sections along its length. All cross-sections on a v2_channel.id object must be either open or closed. + - channel.id has both open and closed cross-sections along its length. All cross-sections on a channel.id object must be either open or closed. * - 0057 - Info - - v2_culvert.id has an open cross-section, which is unusual for this feature. Please make sure this is not a mistake. + - culvert.id has an open cross-section, which is unusual for this feature. Please make sure this is not a mistake. * - 0057 - Info - - v2_pipe.id has an open cross-section, which is unusual for this feature. Please make sure this is not a mistake. + - pipe.id has an open cross-section, which is unusual for this feature. Please make sure this is not a mistake. * - 0061 - Error - - v2_pumpstation.upper_stop_level should be greater than v2_pumpstation.start_level + - pump.upper_stop_level should be greater than pump.start_level * - 0062 - Error - - v2_pumpstation.lower_stop_level should be less than v2_pumpstation.start_level + - pump.lower_stop_level should be less than pump.start_level * - 0063 - Warning - - v2_connection_nodes.storage_area * 1000 for each pumpstation's end connection node must be greater than v2_pumpstation.capacity; water level should not rise >= 1 m in one second + - connection_node.storage_area * 1000 for each pump's end connection node must be greater than pump.capacity; water level should not rise >= 1 m in one second * - 0064 - Error - - v2_pumpstation.capacity is <0 + - pump.capacity is <0 * - 0065 - Warning - - v2_pumpstation.capacity should be be greater than 0 + - pump.capacity should be be greater than 0 * - 0066 - Warning - - v2_pumpstation.capacity will empty its storage faster than one timestep, which can cause simulation instabilities + - pump.capacity will empty its storage faster than one timestep, which can cause simulation instabilities * - 0071 - Error - - v2_1d_boundary_conditions cannot be connected to a pumpstation + - boundary_condition_1d cannot be connected to a pump * - 0072 - Error - 1D boundary condition should be connected to exactly one object. * - 0073 - Error - - v2_2d_boundary_conditions cannot have a groundwater type when there is no groundwater hydraulic conductivity + - boundary_condition_2d cannot have a groundwater type when there is no groundwater hydraulic conductivity * - 0074 - Error - - v2_1d_boundary_conditions cannot have a groundwater type + - boundary_condition_1d cannot have a groundwater type * - 0080 - Error - - Either v2_cross_section_location.friction_valueor v2_cross_section_definition.friction_valuesmust be defined for a CrossSectionShape.TABULATED_YZ cross section shape + - Either cross_section_location.friction_valueor cross_section_location.cross_section_friction_values must be defined for a CrossSectionShape.TABULATED_YZ cross section shape * - 0081 - Error - - v2_cross_section_definition.width cannot be null or empty for shapes ['all'] - * - 0082 + - cross_section_location.cross_section_width cannot be null or empty for shapes [0, 1, 2, 3, 8] + * - 0081 - Error - - v2_cross_section_definition.height cannot be null or empty for shapes [0, 5, 6, 7] - * - 0083 + - culvert.cross_section_width cannot be null or empty for shapes [0, 1, 2, 3, 8] + * - 0081 - Error - - v2_cross_section_definition.width should be a positive number for shapes [0, 1, 2, 3] - * - 0084 + - orifice.cross_section_width cannot be null or empty for shapes [0, 1, 2, 3, 8] + * - 0081 - Error - - v2_cross_section_definition.height should be a positive number for shapes [0] - * - 0085 + - pipe.cross_section_width cannot be null or empty for shapes [0, 1, 2, 3, 8] + * - 0081 - Error - - v2_cross_section_definition.width should be greater than zero for shapes [0, 1, 2, 3, 8] - * - 0086 + - weir.cross_section_width cannot be null or empty for shapes [0, 1, 2, 3, 8] + * - 0082 - Error - - v2_cross_section_definition.height should be greater than zero for shapes [0] + - cross_section_location.cross_section_height cannot be null or empty for shapes [0] + * - 0082 + - Error + - culvert.cross_section_height cannot be null or empty for shapes [0] + * - 0082 + - Error + - orifice.cross_section_height cannot be null or empty for shapes [0] + * - 0082 + - Error + - pipe.cross_section_height cannot be null or empty for shapes [0] + * - 0082 + - Error + - weir.cross_section_height cannot be null or empty for shapes [0] + * - 0083 + - Error + - cross_section_location.cross_section_table cannot be null or empty for shapes [5, 6, 7] + * - 0083 + - Error + - culvert.cross_section_table cannot be null or empty for shapes [5, 6, 7] + * - 0083 + - Error + - orifice.cross_section_table cannot be null or empty for shapes [5, 6, 7] + * - 0083 + - Error + - pipe.cross_section_table cannot be null or empty for shapes [5, 6, 7] + * - 0083 + - Error + - weir.cross_section_table cannot be null or empty for shapes [5, 6, 7] + * - 0085 + - Error + - cross_section_location.cross_section_width should be greater than zero for shapes [0, 1, 2, 3, 8] + * - 0085 + - Error + - culvert.cross_section_width should be greater than zero for shapes [0, 1, 2, 3, 8] + * - 0085 + - Error + - orifice.cross_section_width should be greater than zero for shapes [0, 1, 2, 3, 8] + * - 0085 + - Error + - pipe.cross_section_width should be greater than zero for shapes [0, 1, 2, 3, 8] + * - 0085 + - Error + - weir.cross_section_width should be greater than zero for shapes [0, 1, 2, 3, 8] + * - 0086 + - Error + - cross_section_location.cross_section_height should be greater than zero for shapes [0] + * - 0086 + - Error + - culvert.cross_section_height should be greater than zero for shapes [0] + * - 0086 + - Error + - orifice.cross_section_height should be greater than zero for shapes [0] + * - 0086 + - Error + - pipe.cross_section_height should be greater than zero for shapes [0] + * - 0086 + - Error + - weir.cross_section_height should be greater than zero for shapes [0] + * - 0087 + - Error + - cross_section_location.cross_section_location.cross_section_friction_values should contain comma separated floats for shapes [7] + * - 0087 + - Error + - cross_section_location.cross_section_location.cross_section_table should contain a csv table containing 2 columns with floats for shapes [5, 6, 7] + * - 0087 + - Error + - culvert.culvert.cross_section_table should contain a csv table containing 2 columns with floats for shapes [5, 6, 7] + * - 0087 + - Error + - orifice.orifice.cross_section_table should contain a csv table containing 2 columns with floats for shapes [5, 6, 7] * - 0087 - Error - - v2_cross_section_definition.friction_values should contain a space separated list of numbers for shapes [7] + - pipe.pipe.cross_section_table should contain a csv table containing 2 columns with floats for shapes [5, 6, 7] * - 0087 - Error - - v2_cross_section_definition.width should contain a space separated list of numbers for shapes [5, 6, 7] - * - 0088 + - weir.weir.cross_section_table should contain a csv table containing 2 columns with floats for shapes [5, 6, 7] + * - 0090 + - Error + - cross_section_location.cross_section_table should be monotonically increasing for shapes [5, 6]. Maybe the width and height have been interchanged? + * - 0090 + - Error + - culvert.cross_section_table should be monotonically increasing for shapes [5, 6]. Maybe the width and height have been interchanged? + * - 0090 - Error - - v2_cross_section_definition.height should contain a space separated list of numbers for shapes [5, 6, 7] - * - 0089 + - orifice.cross_section_table should be monotonically increasing for shapes [5, 6]. Maybe the width and height have been interchanged? + * - 0090 - Error - - v2_cross_section_definition width and height should an equal number of elements for shapes [5, 6, 7] + - pipe.cross_section_table should be monotonically increasing for shapes [5, 6]. Maybe the width and height have been interchanged? * - 0090 - Error - - v2_cross_section_definition.height should be monotonically increasing for shapes [5, 6]. Maybe the width and height have been interchanged? + - weir.cross_section_table should be monotonically increasing for shapes [5, 6]. Maybe the width and height have been interchanged? + * - 0091 + - Error + - The first element of cross_section_location.cross_section_table must be larger than 0 for tabulated rectangle shapes. Consider using tabulated trapezium. + * - 0091 + - Error + - The first element of culvert.cross_section_table must be larger than 0 for tabulated rectangle shapes. Consider using tabulated trapezium. * - 0091 - Error - - The first element of v2_cross_section_definition.width must be larger than 0 for tabulated rectangle shapes. Consider using tabulated trapezium. + - The first element of orifice.cross_section_table must be larger than 0 for tabulated rectangle shapes. Consider using tabulated trapezium. + * - 0091 + - Error + - The first element of pipe.cross_section_table must be larger than 0 for tabulated rectangle shapes. Consider using tabulated trapezium. + * - 0091 + - Error + - The first element of weir.cross_section_table must be larger than 0 for tabulated rectangle shapes. Consider using tabulated trapezium. + * - 0092 + - Warning + - The first element of cross_section_location.cross_section_table should equal 0 for shapes [5, 6]. Note that heights are relative to 'reference_level'. * - 0092 - Warning - - The first element of v2_cross_section_definition.height should equal 0 for shapes [5, 6]. Note that heights are relative to 'reference_level'. + - The first element of culvert.cross_section_table should equal 0 for shapes [5, 6]. Note that heights are relative to 'reference_level'. + * - 0092 + - Warning + - The first element of orifice.cross_section_table should equal 0 for shapes [5, 6]. Note that heights are relative to 'reference_level'. + * - 0092 + - Warning + - The first element of pipe.cross_section_table should equal 0 for shapes [5, 6]. Note that heights are relative to 'reference_level'. + * - 0092 + - Warning + - The first element of weir.cross_section_table should equal 0 for shapes [5, 6]. Note that heights are relative to 'reference_level'. + * - 0094 + - Warning + - cross_section_location.cross_section_height should be null or empty for shapes [2, 3, 8] + * - 0094 + - Warning + - culvert.cross_section_height should be null or empty for shapes [2, 3, 8] + * - 0094 + - Warning + - orifice.cross_section_height should be null or empty for shapes [2, 3, 8] * - 0094 - Warning - - v2_cross_section_definition.height should be null or empty for shapes [2, 3, 8] + - pipe.cross_section_height should be null or empty for shapes [2, 3, 8] + * - 0094 + - Warning + - weir.cross_section_height should be null or empty for shapes [2, 3, 8] + * - 0095 + - Error + - cross_section_location.cross_section_table for YZ profiles should include 0.0 and should not include negative values. + * - 0095 + - Error + - culvert.cross_section_table for YZ profiles should include 0.0 and should not include negative values. * - 0095 - Error - - v2_cross_section_definition.height for YZ profiles should include 0.0 and should not include negative values. + - orifice.cross_section_table for YZ profiles should include 0.0 and should not include negative values. + * - 0095 + - Error + - pipe.cross_section_table for YZ profiles should include 0.0 and should not include negative values. + * - 0095 + - Error + - weir.cross_section_table for YZ profiles should include 0.0 and should not include negative values. + * - 0096 + - Error + - cross_section_location width and height should contain at least 3 coordinates (excluding closing coordinate) for YZ profiles * - 0096 - Error - - v2_cross_section_definition width and height should contain at least 3 coordinates (excluding closing coordinate) for YZ profiles + - culvert width and height should contain at least 3 coordinates (excluding closing coordinate) for YZ profiles + * - 0096 + - Error + - orifice width and height should contain at least 3 coordinates (excluding closing coordinate) for YZ profiles + * - 0096 + - Error + - pipe width and height should contain at least 3 coordinates (excluding closing coordinate) for YZ profiles + * - 0096 + - Error + - weir width and height should contain at least 3 coordinates (excluding closing coordinate) for YZ profiles + * - 0097 + - Error + - cross_section_location.cross_section_table should be strictly increasing for open YZ profiles. Perhaps this is actually a closed profile? + * - 0097 + - Error + - culvert.cross_section_table should be strictly increasing for open YZ profiles. Perhaps this is actually a closed profile? + * - 0097 + - Error + - orifice.cross_section_table should be strictly increasing for open YZ profiles. Perhaps this is actually a closed profile? * - 0097 - Error - - v2_cross_section_definition.width should be strictly increasing for open YZ profiles. Perhaps this is actually a closed profile? + - pipe.cross_section_table should be strictly increasing for open YZ profiles. Perhaps this is actually a closed profile? + * - 0097 + - Error + - weir.cross_section_table should be strictly increasing for open YZ profiles. Perhaps this is actually a closed profile? + * - 0098 + - Warning + - cross_section_location.cross_section_width and/or cross_section_height should be at least 0.1m * - 0098 - Warning - - v2_cross_section_definition.width and/or height should probably be at least 0.1m + - culvert.cross_section_width and/or cross_section_height should be at least 0.1m + * - 0098 + - Warning + - orifice.cross_section_width and/or cross_section_height should be at least 0.1m + * - 0098 + - Warning + - pipe.cross_section_width and/or cross_section_height should be at least 0.1m + * - 0098 + - Warning + - weir.cross_section_width and/or cross_section_height should be at least 0.1m * - 0102 - Warning - - v2_culvert.invert_level_start_point should be higher than or equal to v2_manhole.bottom_level. In the future, this will lead to an error. + - culvert.invert_level_start should be higher than or equal to connection_node.bottom_level. In the future, this will lead to an error. * - 0102 - Warning - - v2_pipe.invert_level_start_point should be higher than or equal to v2_manhole.bottom_level. In the future, this will lead to an error. + - pipe.invert_level_start should be higher than or equal to connection_node.bottom_level. In the future, this will lead to an error. * - 0103 - Warning - - v2_culvert.invert_level_end_point should be higher than or equal to v2_manhole.bottom_level. In the future, this will lead to an error. + - culvert.invert_level_end should be higher than or equal to connection_node.bottom_level. In the future, this will lead to an error. * - 0103 - Warning - - v2_pipe.invert_level_end_point should be higher than or equal to v2_manhole.bottom_level. In the future, this will lead to an error. + - pipe.invert_level_end should be higher than or equal to connection_node.bottom_level. In the future, this will lead to an error. * - 0104 - Warning - - v2_pumpstation.lower_stop_level should be higher than v2_manhole.bottom_level. In the future, this will lead to an error. + - pump.lower_stop_level should be higher than connection_node.bottom_level. In the future, this will lead to an error. * - 0105 - Warning - - v2_pumpstation.lower_stop_level should be higher than v2_manhole.bottom_level. In the future, this will lead to an error. + - pump.lower_stop_level should be higher than connection_node.bottom_level. In the future, this will lead to an error. * - 0106 - Warning - - v2_manhole.drain_level >= v2_manhole.bottom_level when v2_manhole.calculation_type is CONNECTED. In the future, this will lead to an error. + - connection_node.exchange_level >= connection_node.bottom_level when connection_node.exchange_type is CONNECTED. In the future, this will lead to an error. * - 0107 - Warning - - v2_manhole.drain_level cannot be null when using sub-basins (v2_global_settings.manhole_storage_area > 0) and no DEM is supplied. + - connection_node.exchange_level cannot be null when using sub-basins (model_settings.manhole_aboveground_storage_area > 0) and no DEM is supplied. * - 0108 - Warning - - v2_orifice.crest_level should be higher than or equal to v2_manhole.bottom_level for all the connected manholes. + - orifice.crest_level should be higher than or equal to connection_node.bottom_level for all the connected manholes. * - 0108 - Warning - - v2_weir.crest_level should be higher than or equal to v2_manhole.bottom_level for all the connected manholes. + - weir.crest_level should be higher than or equal to connection_node.bottom_level for all the connected manholes. * - 0109 - Info - - The v2_manhole.bottom_level at the start of this v2_channel is higher than the v2_cross_section_location.reference_level closest to the manhole. This will be automatically fixed in threedigrid-builder. + - The connection_node.bottom_level at the start of this channel is higher than the cross_section_location.reference_level closest to the manhole. This will be automatically fixed in threedigrid-builder. * - 0110 - Info - - The v2_manhole.bottom_level at the end of this v2_channel is higher than the v2_cross_section_location.reference_level closest to the manhole. This will be automatically fixed in threedigrid-builder. + - The connection_node.bottom_level at the end of this channel is higher than the cross_section_location.reference_level closest to the manhole. This will be automatically fixed in threedigrid-builder. * - 0180 - Error - - v2_cross_section_definition.friction_values can only be used in combination with a TABULATED_YZ cross section shape + - cross_section_location.cross_section_friction_values can only be used in combination with a TABULATED_YZ cross section shape * - 0180 - Error - - v2_cross_section_definition.vegetation_drag_coefficients can only be used in combination with a TABULATED_YZ cross section shape - * - 0180 - - Error - - v2_cross_section_definition.vegetation_heights can only be used in combination with a TABULATED_YZ cross section shape - * - 0180 - - Error - - v2_cross_section_definition.vegetation_stem_densities can only be used in combination with a TABULATED_YZ cross section shape - * - 0180 - - Error - - v2_cross_section_definition.vegetation_stem_diameters can only be used in combination with a TABULATED_YZ cross section shape - * - 0181 - - Error - - v2_cross_section_definition.vegetation_drag_coefficients should contain 1 value for each element; len(v2_cross_section_definition.vegetation_drag_coefficients) = len(width)-1 - * - 0181 - - Error - - v2_cross_section_definition.vegetation_heights should contain 1 value for each element; len(v2_cross_section_definition.vegetation_heights) = len(width)-1 - * - 0181 - - Error - - v2_cross_section_definition.vegetation_stem_densities should contain 1 value for each element; len(v2_cross_section_definition.vegetation_stem_densities) = len(width)-1 + - cross_section_location.cross_section_vegetation_table can only be used in combination with a TABULATED_YZ cross section shape * - 0181 - Error - - v2_cross_section_definition.vegetation_stem_diameters should contain 1 value for each element; len(v2_cross_section_definition.vegetation_stem_diameters) = len(width)-1 + - cross_section_location.cross_section_friction_values should contain 1 value for each element; len(cross_section_location.cross_section_friction_values) = len(width)-1 * - 0182 - Warning - - Both v2_cross_section_location.vegetation_drag_coefficient and v2_cross_section_definition.vegetation_drag_coefficients defined without conveyance; v2_cross_section_location.vegetation_drag_coefficient will be used + - Both cross_section_location.vegetation_drag_coefficient and cross_section_location.cross_section_vegetation_table defined without conveyance; cross_section_location.vegetation_drag_coefficient will be used * - 0182 - Warning - - Both v2_cross_section_location.vegetation_height and v2_cross_section_definition.vegetation_heights defined without conveyance; v2_cross_section_location.vegetation_height will be used + - Both cross_section_location.vegetation_height and cross_section_location.cross_section_vegetation_table defined without conveyance; cross_section_location.vegetation_height will be used * - 0182 - Warning - - Both v2_cross_section_location.vegetation_stem_density and v2_cross_section_definition.vegetation_stem_densities defined without conveyance; v2_cross_section_location.vegetation_stem_density will be used + - Both cross_section_location.vegetation_stem_density and cross_section_location.cross_section_vegetation_table defined without conveyance; cross_section_location.vegetation_stem_density will be used * - 0182 - Warning - - Both v2_cross_section_location.vegetation_stem_diameter and v2_cross_section_definition.vegetation_stem_diameters defined without conveyance; v2_cross_section_location.vegetation_stem_diameter will be used + - Both cross_section_location.vegetation_stem_diameter and cross_section_location.cross_section_vegetation_table defined without conveyance; cross_section_location.vegetation_stem_diameter will be used * - 0183 - Warning - - Both v2_cross_section_location.vegetation_drag_coefficient and v2_cross_section_definition.vegetation_drag_coefficients defined without conveyance; v2_cross_section_definition.vegetation_drag_coefficients will be used + - Both cross_section_location.vegetation_drag_coefficient and cross_section_location.cross_section_vegetation_table defined with conveyance; cross_section_location.cross_section_vegetation_table will be used * - 0183 - Warning - - Both v2_cross_section_location.vegetation_height and v2_cross_section_definition.vegetation_heights defined without conveyance; v2_cross_section_definition.vegetation_heights will be used + - Both cross_section_location.vegetation_height and cross_section_location.cross_section_vegetation_table defined with conveyance; cross_section_location.cross_section_vegetation_table will be used * - 0183 - Warning - - Both v2_cross_section_location.vegetation_stem_density and v2_cross_section_definition.vegetation_stem_densities defined without conveyance; v2_cross_section_definition.vegetation_stem_densities will be used + - Both cross_section_location.vegetation_stem_density and cross_section_location.cross_section_vegetation_table defined with conveyance; cross_section_location.cross_section_vegetation_table will be used * - 0183 - Warning - - Both v2_cross_section_location.vegetation_stem_diameter and v2_cross_section_definition.vegetation_stem_diameters defined without conveyance; v2_cross_section_definition.vegetation_stem_diameters will be used + - Both cross_section_location.vegetation_stem_diameter and cross_section_location.cross_section_vegetation_table defined with conveyance; cross_section_location.cross_section_vegetation_table will be used * - 0184 - Warning - - Both v2_cross_section_definition.friction_valuesand v2_cross_section_location.friction_valueare defined for non-conveyance friction. Only v2_cross_section_location.friction_valuewill be used + - Both cross_section_location.cross_section_friction_values and cross_section_location.friction_value are defined for non-conveyance friction. Only cross_section_location.cross_section_friction_values will be used * - 0185 - Warning - - Both v2_cross_section_definition.friction_valuesand v2_cross_section_location.friction_valueare defined for conveyance friction. Only v2_cross_section_definition.friction_valueswill be used + - Both cross_section_location.cross_section_friction_values and cross_section_location.friction_value are defined for non-conveyance friction. Only cross_section_location.friction_value will be used * - 0186 - Error - - v2_cross_section_definition.friction_values can only be used in an open channel with monotonically increasing width values + - cross_section_location.id can only be used in an open channel with monotonically increasing width values * - 0186 - Error - - v2_cross_section_definition.vegetation_drag_coefficients can only be used in an open channel with monotonically increasing width values + - culvert.id can only be used in an open channel with monotonically increasing width values * - 0186 - Error - - v2_cross_section_definition.vegetation_heights can only be used in an open channel with monotonically increasing width values + - orifice.id can only be used in an open channel with monotonically increasing width values * - 0186 - Error - - v2_cross_section_definition.vegetation_stem_densities can only be used in an open channel with monotonically increasing width values + - pipe.id can only be used in an open channel with monotonically increasing width values * - 0186 - Error - - v2_cross_section_definition.vegetation_stem_diameters can only be used in an open channel with monotonically increasing width values - * - 0187 - - Error - - v2_cross_section_definition.vegetation_drag_coefficients should contain a space separated list of numbers for shapes [7] - * - 0187 - - Error - - v2_cross_section_definition.vegetation_heights should contain a space separated list of numbers for shapes [7] - * - 0187 - - Error - - v2_cross_section_definition.vegetation_stem_densities should contain a space separated list of numbers for shapes [7] - * - 0187 - - Error - - v2_cross_section_definition.vegetation_stem_diameters should contain a space separated list of numbers for shapes [7] + - weir.id can only be used in an open channel with monotonically increasing width values * - 0188 - Error - - some values in v2_cross_section_definition.friction_values are < 0 and/or >= 1 + - some values in cross_section_location.cross_section_friction_values are < 0 and/or >= 1 * - 0189 - Error - - some values in v2_cross_section_definition.friction_values are < 0 + - some values in cross_section_location.cross_section_friction_values are < 0 * - 0190 - Error - - v2_cross_section_location.vegetation_drag_coefficient is <0 + - cross_section_location.vegetation_drag_coefficient is <0 * - 0190 - Error - - v2_cross_section_location.vegetation_height is <0 + - cross_section_location.vegetation_height is <0 * - 0190 - Error - - v2_cross_section_location.vegetation_stem_density is <0 + - cross_section_location.vegetation_stem_density is <0 * - 0190 - Error - - v2_cross_section_location.vegetation_stem_diameter is <0 - * - 0191 - - Error - - some values in v2_cross_section_definition.vegetation_drag_coefficients are < 0 - * - 0191 - - Error - - some values in v2_cross_section_definition.vegetation_heights are < 0 - * - 0191 - - Error - - some values in v2_cross_section_definition.vegetation_stem_densities are < 0 + - cross_section_location.vegetation_stem_diameter is <0 * - 0191 - Error - - some values in v2_cross_section_definition.vegetation_stem_diameters are < 0 + - All values in cross_section_location.cross_section_location.cross_section_vegetation_table should be equal to or larger than 0 * - 0192 - Error - - v2_cross_section_location.vegetation_drag_coefficient cannot be used with Manning type friction + - cross_section_location.vegetation_drag_coefficient cannot be used with Manning type friction * - 0192 - Error - - v2_cross_section_location.vegetation_height cannot be used with Manning type friction + - cross_section_location.vegetation_height cannot be used with Manning type friction * - 0192 - Error - - v2_cross_section_location.vegetation_stem_density cannot be used with Manning type friction + - cross_section_location.vegetation_stem_density cannot be used with Manning type friction * - 0192 - Error - - v2_cross_section_location.vegetation_stem_diameter cannot be used with Manning type friction - * - 0193 - - Error - - v2_cross_section_definition.vegetation_drag_coefficients cannot be used with MANNING type friction - * - 0193 - - Error - - v2_cross_section_definition.vegetation_heights cannot be used with MANNING type friction - * - 0193 - - Error - - v2_cross_section_definition.vegetation_stem_densities cannot be used with MANNING type friction + - cross_section_location.vegetation_stem_diameter cannot be used with Manning type friction * - 0193 - Error - - v2_cross_section_definition.vegetation_stem_diameters cannot be used with MANNING type friction + - cross_section_location.cross_section_vegetation_table cannot be used with MANNING type friction * - 0194 - Error - - All of these columns must be defined: v2_cross_section_location.vegetation_drag_coefficient,v2_cross_section_location.vegetation_height,v2_cross_section_location.vegetation_stem_diameter,v2_cross_section_location.vegetation_stem_density + - Invalid value in column 'cross_section_location.vegetation_height' * - 0195 - Error - - All of these columns must be defined: v2_cross_section_definition.vegetation_drag_coefficients,v2_cross_section_definition.vegetation_heights,v2_cross_section_definition.vegetation_stem_diameters,v2_cross_section_definition.vegetation_stem_densities + - cross_section_location.cross_section_location.cross_section_vegetation_table should contain a csv table containing 4 columns with floats for shapes [5, 6, 7] + * - 0196 + - Error + - cross_section_location.cross_section_vegetation_table should contain 1 value for each element; len(cross_section_location.cross_section_vegetation_table) = len(width)-1 * - 0201 - Warning - - The connection_node is within 0.001 degrees of another connection_node. + - The connection_node is within 10.0 cm of another connection_node. * - 0202 - Warning - - The length of v2_channel is very short (< 5 m). A length of at least 5.0 m is recommended to avoid timestep reduction. + - The length of channel is very short (< 5 m). A length of at least 5.0 m is recommended to avoid timestep reduction. * - 0202 - Warning - - The length of v2_culvert is very short (< 5 m). A length of at least 5.0 m is recommended to avoid timestep reduction. + - The length of culvert is very short (< 5 m). A length of at least 5.0 m is recommended to avoid timestep reduction. * - 0203 - Warning - - The length of v2_pipe is very short (< 5.0). A length of at least 5.0 m is recommended to avoid timestep reduction. + - The length of pipe is very short (< 5.0). A length of at least 5.0 m is recommended to avoid timestep reduction. * - 0204 - Warning - - The length of v2_orifice is very short (< 5.0). A length of at least 5.0 m is recommended to avoid timestep reduction. + - The length of orifice is very short (< 5.0). A length of at least 5.0 m is recommended to avoid timestep reduction. * - 0204 - Warning - - The length of v2_weir is very short (< 5.0). A length of at least 5.0 m is recommended to avoid timestep reduction. + - The length of weir is very short (< 5.0). A length of at least 5.0 m is recommended to avoid timestep reduction. + * - 0205 + - Error + - channel.geom does not start or end at its connection node (tolerance = 1 m) + * - 0205 + - Error + - culvert.geom does not start or end at its connection node (tolerance = 1 m) + * - 0205 + - Error + - dry_weather_flow_map.geom does not start or end at its connection nodes: dry_weather_flow_map.connection_node_id and dry_weather_flow_map.dry_weather_flow_id (tolerance = 1 m) + * - 0205 + - Error + - measure_map.geom does not start or end at its connection nodes: measure_map.measure_location_id and measure_map.control_id (tolerance = 1 m) + * - 0205 + - Error + - measure_map.geom does not start or end at its connection nodes: measure_map.measure_location_id and measure_map.control_id (tolerance = 1 m) * - 0205 - Error - - v2_channel.the_geom does not start or end at its connection node (tolerance = 1 m) + - orifice.geom does not start or end at its connection node (tolerance = 1 m) * - 0205 - Error - - v2_culvert.the_geom does not start or end at its connection node (tolerance = 1 m) + - pipe.geom does not start or end at its connection node (tolerance = 1 m) + * - 0205 + - Error + - pump_map.geom does not start or end at its connection nodes: pump_map.pump_id and pump_map.connection_node_id_end (tolerance = 1 m) + * - 0205 + - Error + - surface_map.geom does not start or end at its connection nodes: surface_map.surface_id and surface_map.connection_node_id (tolerance = 1 m) + * - 0205 + - Error + - weir.geom does not start or end at its connection node (tolerance = 1 m) + * - 0206 + - Warning + - boundary_condition_1d.geom does not match the position of the object that boundary_condition_1d.BoundaryCondition1D.connection_node_id refers to + * - 0206 + - Warning + - cross_section_location.geom does not match the position of the object that cross_section_location.CrossSectionLocation.channel_id refers to + * - 0206 + - Warning + - lateral_1d.geom does not match the position of the object that lateral_1d.Lateral1d.connection_node_id refers to + * - 0206 + - Warning + - measure_location.geom does not match the position of the object that measure_location.ControlMeasureLocation.connection_node_id refers to + * - 0206 + - Warning + - memory_control.geom does not match the position of the object that memory_control.ControlMemory.target_id refers to + * - 0206 + - Warning + - memory_control.geom does not match the position of the object that memory_control.ControlMemory.target_id refers to + * - 0206 + - Warning + - memory_control.geom does not match the position of the object that memory_control.ControlMemory.target_id refers to + * - 0206 + - Warning + - memory_control.geom does not match the position of the object that memory_control.ControlMemory.target_id refers to + * - 0206 + - Warning + - memory_control.geom does not match the position of the object that memory_control.ControlMemory.target_id refers to + * - 0206 + - Warning + - memory_control.geom does not match the position of the object that memory_control.ControlMemory.target_id refers to + * - 0206 + - Warning + - pump.geom does not match the position of the object that pump.Pump.connection_node_id refers to + * - 0206 + - Warning + - table_control.geom does not match the position of the object that table_control.ControlTable.target_id refers to + * - 0206 + - Warning + - table_control.geom does not match the position of the object that table_control.ControlTable.target_id refers to + * - 0206 + - Warning + - table_control.geom does not match the position of the object that table_control.ControlTable.target_id refers to + * - 0206 + - Warning + - table_control.geom does not match the position of the object that table_control.ControlTable.target_id refers to + * - 0206 + - Warning + - table_control.geom does not match the position of the object that table_control.ControlTable.target_id refers to + * - 0206 + - Warning + - table_control.geom does not match the position of the object that table_control.ControlTable.target_id refers to * - 0206 - Error - - ConnectionNode.the_geom_linestring must be NULL + - windshielding_1d.geom does not match the position of the object that windshielding_1d.Windshielding.channel_id refers to * - 0207 - Warning - - v2_connection_nodes.the_geom has no valid spatial index, which is required for some checks - * - 0208 - - Warning - - v2_impervious_surface.area has a v2_impervious_surface.area (used in the simulation) differing from its geometrical area by more than 1 m2 + - connection_node.geom has no valid spatial index, which is required for some checks * - 0208 - Warning - - v2_surface.area has a v2_surface.area (used in the simulation) differing from its geometrical area by more than 1 m2 + - surface.area has a surface.area (used in the simulation) differing from its geometrical area by more than 1 m2 * - 0251 - Warning - - This is an isolated connection node without connections. Connect it to either a pipe, channel, culvert, weir, orifice or pumpstation. + - This connection node is not connected to a pipe, channel, culvert, weir, orifice or pumpstation. * - 0252 - Warning - When connecting two isolated pipes, it is recommended to add storage to the connection node. * - 0253 - Error - - a v2_channel cannot be connected to itself (connection_node_start_id must not equal connection_node_end_id) + - a channel cannot be connected to itself (connection_node_id_start must not equal connection_node_id_end) * - 0253 - Error - - a v2_culvert cannot be connected to itself (connection_node_start_id must not equal connection_node_end_id) + - a culvert cannot be connected to itself (connection_node_id_start must not equal connection_node_id_end) * - 0253 - Error - - a v2_orifice cannot be connected to itself (connection_node_start_id must not equal connection_node_end_id) + - a orifice cannot be connected to itself (connection_node_id_start must not equal connection_node_id_end) * - 0253 - Error - - a v2_pipe cannot be connected to itself (connection_node_start_id must not equal connection_node_end_id) + - a pipe cannot be connected to itself (connection_node_id_start must not equal connection_node_id_end) * - 0253 - Error - - a v2_pumpstation cannot be connected to itself (connection_node_start_id must not equal connection_node_end_id) + - a pump cannot be connected to itself (pump.connection_node_id must not equal the corresponding pump_map.connection_node_id_end) * - 0253 - Error - - a v2_weir cannot be connected to itself (connection_node_start_id must not equal connection_node_end_id) - * - 0254 + - a weir cannot be connected to itself (connection_node_id_start must not equal connection_node_id_end) + * - 0255 - Error - - A connection node that is not connected to a pipe, channel, culvert, weir, or orifice must have a manhole with a bottom_level. + - a pump cannot be connected to itself (pump.connection_node_id must not equal pumpmap.connection_node_id_end) * - 0260 - Error - - v2_channel can only have a v2_exchange_line if it has a (double) connected (102 or 105) calculation type + - channel can only have an exchange_line if it has a (double) connected (102 or 105) calculation type * - 0261 - Error - - v2_channel can have max 1 v2_exchange_line if it has connected (102) calculation type + - channel can have max 1 exchange_line if it has connected (102) calculation type * - 0262 - Error - - v2_channel can have max 2 v2_exchange_line if it has double connected (105) calculation type + - channel can have max 2 exchange_line if it has double connected (105) calculation type * - 0263 - Warning - - v2_exchange_line.the_geom should not be significantly shorter than its corresponding channel. + - exchange_line.geom should not be significantly shorter than its corresponding channel. * - 0264 - Warning - - v2_exchange_line.the_geom is far (> 500 m) from its corresponding channel + - exchange_line.geom is far (> 500 m) from its corresponding channel * - 0265 - Error - - v2_exchange_line.exchange_level is <-9998.0 and/or >8848.0 + - exchange_line.exchange_level is <-9998.0 and/or >8848.0 * - 0270 - Error - - v2_potential_breach is assigned to an isolated or embedded channel. + - potential_breach is assigned to an isolated or embedded channel. * - 0271 - Error - - v2_channel can have max 1 v2_potential_breach at the same position on a channel of connected (102) calculation type + - channel can have max 1 potential_breach at the same position on a channel of connected (102) calculation type * - 0272 - Error - - v2_channel can have max 2 v2_potential_breach at the same position on a channel of double connected (105) calculation type + - channel can have max 2 potential_breach at the same position on a channel of double connected (105) calculation type * - 0273 - Error - - v2_potential_breach.the_geom must begin at the channel it is assigned to + - potential_breach.geom must begin at the channel it is assigned to * - 0274 - Error - - v2_potential_breach.the_geom must be exactly on or >= 1.0 m from a start or end channel vertex + - potential_breach.geom must be exactly on or >= 1.0 m from a start or end channel vertex * - 0275 - Error - - v2_potential_breach.the_geom must be more than 1.0 m apart (or exactly on the same position) + - potential_breach.geom must be more than 1.0 m apart (or exactly on the same position) * - 0276 - Error - - v2_potential_breach.exchange_level is <-9998.0 and/or >8848.0 + - potential_breach.initial_exchange_level is <-9998.0 and/or >8848.0 * - 0277 - Error - - v2_potential_breach.maximum_breach_depth is <=0.0 and/or >100.0 - * - 0302 - - Error - - v2_global_settings.dem_obstacle_detection is True, while this feature is not supported + - potential_breach.final_exchange_level is <=-9998.0 and/or >8848.0 * - 0303 - Warning - - v2_global_settings.use_1d_flow is turned off while there are 1D elements in the model + - model_settings.use_1d_flow is turned off while there are 1D elements in the model * - 0304 - Error - simple_infiltration in combination with groundwater flow is not allowed. * - 0305 - Error - - v2_global_settings.kmax is <=0 + - model_settings.nr_grid_levels is <=0 * - 0306 - Warning - - v2_global_settings.dist_calc_points is not greater than 0, in the future this will lead to an error + - model_settings.calculation_point_distance_1d is not greater than 0, in the future this will lead to an error * - 0307 - Error - - v2_global_settings.grid_space is <=0 + - model_settings.minimum_cell_size is <=0 * - 0308 - Error - - v2_global_settings.embedded_cutoff_threshold is <0 + - model_settings.embedded_cutoff_threshold is <0 * - 0309 - Error - - v2_global_settings.max_angle_1d_advection is <0 and/or >1.570795 + - model_settings.max_angle_1d_advection is <0 and/or >1.570795 * - 0310 - Error - - v2_global_settings.table_step_size is <=0 + - model_settings.minimum_table_step_size is <=0 * - 0311 - Error - - v2_global_settings.table_step_size_1d is <=0 + - model_settings.table_step_size_1d is <=0 * - 0313 - Error - - v2_global_settings.frict_coef is <0 and/or >1 + - model_settings.friction_coefficient is <0 and/or >1 * - 0314 - Error - - v2_global_settings.frict_coef is <0 + - model_settings.friction_coefficient is <0 * - 0315 - Error - - v2_global_settings.interception_global is <0 + - interception.interception is <0 * - 0316 - Error - - v2_global_settings.manhole_storage_area is <0 - * - 0317 - - Error - - v2_global_settings.epsg_code may not be NULL if no dem file is provided - * - 0318 - - Warning - - if v2_global_settings.epsg_code is NULL, it will be extracted from the DEM later, however, the modelchecker will use ESPG:28992 for its spatial checks + - model_settings.manhole_aboveground_storage_area is <0 * - 0319 - Error - - v2_global_settings.use_2d_flow may not be TRUE if no dem file is provided + - model_settings.use_2d_flow may not be TRUE if no dem file is provided * - 0320 - Error - - v2_global_settings.use_1d_flow and v2_global_settings.use_2d_flow cannot both be FALSE + - model_settings.use_1d_flow and model_settings.use_2d_flow cannot both be FALSE * - 0321 - Warning - - sub-basins (v2_global_settings.manhole_storage_area > 0) should only be used when there is no DEM supplied and there is no 2D flow + - sub-basins (model_settings.manhole_aboveground_storage_area > 0) should only be used when there is no DEM supplied and there is no 2D flow * - 0322 - Error - - an initial waterlevel type (v2_global_settings.water_level_ini_type) should be defined when using an initial waterlevel file. + - an initial waterlevel type (initial_conditions.initial_water_level_aggregation) should be defined when using an initial waterlevel file. * - 0323 - Error - - v2_global_settings.maximum_table_step_size should be greater than v2_global_settings.table_step_size. + - model_settings.maximum_table_step_size should be greater than model_settings.minimum_table_step_size. * - 0325 - Warning - - v2_global_settings.interception_global is recommended as fallback value when using an interception_file. + - interception.interception is recommended as fallback value when using an interception_file. * - 0326 - - Info - - v2_control_group is defined, but not referred to in v2_global_settings.control_group_id + - Error + - model_settings.use_groundwater_flow in model_settings is set to True but {self.settings_tables[0].__tablename__} is empty * - 0326 - - Info - - v2_groundwater is defined, but not referred to in v2_global_settings.groundwater_settings_id + - Error + - model_settings.use_groundwater_storage in model_settings is set to True but {self.settings_tables[0].__tablename__} is empty * - 0326 - - Info - - v2_interflow is defined, but not referred to in v2_global_settings.interflow_settings_id + - Error + - model_settings.use_interception in model_settings is set to True but {self.settings_tables[0].__tablename__} is empty * - 0326 - - Info - - v2_numerical_settings is defined, but not referred to in v2_global_settings.numerical_settings_id + - Error + - model_settings.use_interflow in model_settings is set to True but {self.settings_tables[0].__tablename__} is empty * - 0326 - - Info - - v2_simple_infiltration is defined, but not referred to in v2_global_settings.simple_infiltration_settings_id + - Error + - model_settings.use_simple_infiltration in model_settings is set to True but {self.settings_tables[0].__tablename__} is empty * - 0326 - - Info - - v2_vegetation_drag is defined, but not referred to in v2_global_settings.vegetation_drag_settings_id + - Error + - model_settings.use_vegetation_drag_2d in model_settings is set to True but {self.settings_tables[0].__tablename__} is empty * - 0327 - Error - Vegetation drag can only be used in combination with friction type 1 (Chézy) - * - 0330 - - Warning - - v2_global_settings.use_2d_flow is different and is ignored if it is not in the first record - * - 0331 - - Warning - - v2_global_settings.use_1d_flow is different and is ignored if it is not in the first record - * - 0332 - - Warning - - v2_global_settings.grid_space is different and is ignored if it is not in the first record - * - 0333 - - Warning - - v2_global_settings.dist_calc_points is different and is ignored if it is not in the first record - * - 0334 - - Warning - - v2_global_settings.kmax is different and is ignored if it is not in the first record - * - 0335 - - Warning - - v2_global_settings.dem_file is different and is ignored if it is not in the first record - * - 0336 - - Warning - - v2_global_settings.embedded_cutoff_threshold is different and is ignored if it is not in the first record - * - 0337 - - Warning - - v2_global_settings.epsg_code is different and is ignored if it is not in the first record - * - 0338 - - Warning - - v2_global_settings.max_angle_1d_advection is different and is ignored if it is not in the first record - * - 0339 - - Warning - - v2_global_settings.frict_avg is different and is ignored if it is not in the first record - * - 0340 - - Warning - - v2_global_settings.use_0d_inflow is different and is ignored if it is not in the first record - * - 0341 - - Warning - - v2_global_settings.manhole_storage_area is different and is ignored if it is not in the first record - * - 0342 - - Warning - - v2_global_settings.table_step_size is different and is ignored if it is not in the first record - * - 0343 - - Warning - - v2_global_settings.frict_type is different and is ignored if it is not in the first record - * - 0344 - - Warning - - v2_global_settings.frict_coef is different and is ignored if it is not in the first record - * - 0345 - - Warning - - v2_global_settings.frict_coef_file is different and is ignored if it is not in the first record - * - 0346 - - Warning - - v2_global_settings.interception_global is different and is ignored if it is not in the first record - * - 0347 - - Warning - - v2_global_settings.interception_file is different and is ignored if it is not in the first record - * - 0348 - - Warning - - v2_global_settings.table_step_size_1d is different and is ignored if it is not in the first record - * - 0349 - - Warning - - v2_global_settings.maximum_table_step_size is different and is ignored if it is not in the first record - * - 0350 - - Warning - - v2_global_settings.interflow_settings_id is different and is ignored if it is not in the first record - * - 0351 - - Warning - - v2_global_settings.simple_infiltration_settings_id is different and is ignored if it is not in the first record - * - 0352 - - Warning - - v2_global_settings.groundwater_settings_id is different and is ignored if it is not in the first record - * - 0353 - - Warning - - v2_global_settings.vegetation_drag_settings_id is different and is ignored if it is not in the first record + * - 0328 + - Info + - groundwater has 0 rows, but should have at most 1 row. + * - 0328 + - Info + - initial_conditions has 0 rows, but should have at most 1 row. + * - 0328 + - Info + - interception has 0 rows, but should have at most 1 row. + * - 0328 + - Info + - interflow has 0 rows, but should have at most 1 row. + * - 0328 + - Info + - model_settings has 0 rows, but should have at most 1 row. + * - 0328 + - Info + - numerical_settings has 0 rows, but should have at most 1 row. + * - 0328 + - Info + - physical_settings has 0 rows, but should have at most 1 row. + * - 0328 + - Info + - simple_infiltration has 0 rows, but should have at most 1 row. + * - 0328 + - Info + - simulation_template_settings has 0 rows, but should have at most 1 row. + * - 0328 + - Info + - time_step_settings has 0 rows, but should have at most 1 row. + * - 0328 + - Info + - vegetation_drag_2d has 0 rows, but should have at most 1 row. + * - 0329 + - Error + - simulation_template_settings.use_0d_inflow in simulation_template_settings is set to True but [surface,dry_weather_flow] are empty + * - 0329 + - Error + - simulation_template_settings.use_structure_control in simulation_template_settings is set to True but [table_control,memory_control] are empty * - 0360 - Warning - - v2_global_settings.dist_calc_points should preferably be at least 5.0 metres to prevent simulation timestep reduction. + - model_settings.calculation_point_distance_1d should preferably be at least 5.0 metres to prevent simulation timestep reduction. * - 0401 - Error - - v2_interflow.porosity is <0 and/or >1 + - interflow.porosity is <0 and/or >1 * - 0402 - Error - - v2_interflow.impervious_layer_elevation is <0 + - interflow.impervious_layer_elevation is <0 * - 0403 - Error - - v2_simple_infiltration.infiltration_rate is <0 + - simple_infiltration.infiltration_rate is <0 * - 0404 - Warning - - v2_simple_infiltration.infiltration_rate is recommended as fallback value when using an infiltration_rate_file. + - simple_infiltration.infiltration_rate is recommended as fallback value when using an infiltration_rate_file. * - 0404 - Error - - v2_simple_infiltration.infiltration_rate must be defined. + - simple_infiltration.infiltration_rate must be defined. * - 0405 - Warning - - v2_groundwater.equilibrium_infiltration_rate is recommended as fallback value when using an equilibrium_infiltration_rate_file. - * - 0405 - - Error - - v2_groundwater.equilibrium_infiltration_rate must be defined when not using an equilibrium_infiltration_rate_file. + - groundwater.equilibrium_infiltration_rate is recommended as fallback value when using an equilibrium_infiltration_rate_file. * - 0406 - Error - - v2_groundwater.equilibrium_infiltration_rate_type should be defined when using an equilibrium_infiltration_rate_file. + - groundwater.equilibrium_infiltration_rate_aggregation should be defined when using an equilibrium_infiltration_rate_file. * - 0407 - Warning - - v2_groundwater.infiltration_decay_period is recommended as fallback value when using an infiltration_decay_period_file. + - groundwater.infiltration_decay_period is recommended as fallback value when using an infiltration_decay_period_file. * - 0407 - Error - - v2_groundwater.infiltration_decay_period must be defined when not using an infiltration_decay_period_file. + - groundwater.infiltration_decay_period must be defined when not using an infiltration_decay_period_file. * - 0408 - Error - - an infiltration decay period type (v2_groundwater.infiltration_decay_period_type) should be defined when using an infiltration decay period file. + - an infiltration decay period type (groundwater.infiltration_decay_period_aggregation) should be defined when using an infiltration decay period file. * - 0409 - Error - - v2_groundwater.groundwater_hydro_connectivity_type should be defined when using a groundwater_hydro_connectivity_file. + - groundwater.groundwater_hydraulic_conductivity_aggregation should be defined when using a groundwater_hydraulic_conductivity_file. * - 0410 - Warning - - v2_groundwater.groundwater_impervious_layer_level is recommended as fallback value when using a groundwater_impervious_layer_level_file. + - groundwater.groundwater_impervious_layer_level is recommended as fallback value when using a groundwater_impervious_layer_level_file. * - 0410 - Error - - v2_groundwater.groundwater_impervious_layer_level must be defined when not using an groundwater_impervious_layer_level_file + - groundwater.groundwater_impervious_layer_level must be defined when not using an groundwater_impervious_layer_level_file * - 0411 - Error - - v2_groundwater.groundwater_impervious_layer_level_type should be defined when using a groundwater_impervious_layer_level_file + - groundwater.groundwater_impervious_layer_level_aggregation should be defined when using a groundwater_impervious_layer_level_file * - 0412 - Warning - - v2_groundwater.initial_infiltration_rate is recommended as fallback value when using a initial_infiltration_rate_file. + - groundwater.initial_infiltration_rate is recommended as fallback value when using a initial_infiltration_rate_file. * - 0412 - Error - - v2_groundwater.initial_infiltration_rate must be defined when not using a initial_infiltration_rate_file. + - groundwater.initial_infiltration_rate must be defined when not using a initial_infiltration_rate_file. * - 0413 - Error - - v2_groundwater.initial_infiltration_rate_type should be defined when using an initial infiltration rate file. + - groundwater.initial_infiltration_rate_aggregation should be defined when using an initial infiltration rate file. * - 0414 - Warning - - v2_groundwater.phreatic_storage_capacity is recommended as fallback value when using a phreatic_storage_capacity_file. + - groundwater.phreatic_storage_capacity is recommended as fallback value when using a phreatic_storage_capacity_file. * - 0414 - Error - - v2_groundwater.phreatic_storage_capacity must be defined when not using a phreatic_storage_capacity_file. + - groundwater.phreatic_storage_capacity must be defined when not using a phreatic_storage_capacity_file. * - 0415 - Error - - a phreatic storage capacity type (v2_groundwater.phreatic_storage_capacity_type) should be defined when using a phreatic storage capacity file. + - a phreatic storage capacity type (groundwater.phreatic_storage_capacity_aggregation) should be defined when using a phreatic storage capacity file. * - 0416 - Warning - - v2_interflow.porosity is recommended as fallback value when using a porosity_file. + - interflow.porosity is recommended as fallback value when using a porosity_file. * - 0416 - Error - - v2_interflow.porosity must be defined when not using a porosity_file. + - interflow.porosity must be defined when not using a porosity_file. * - 0417 - Error - - a porosity layer thickness (v2_interflow.porosity_layer_thickness) should be defined and >0 when interflow_type is InterflowType.LOCAL_DEEPEST_POINT_SCALED_POROSITY or InterflowType.GLOBAL_DEEPEST_POINT_SCALED_POROSITY + - a porosity layer thickness (interflow.porosity_layer_thickness) should be defined and >0 when interflow_type is InterflowType.LOCAL_DEEPEST_POINT_SCALED_POROSITY or InterflowType.GLOBAL_DEEPEST_POINT_SCALED_POROSITY * - 0418 - Error - - v2_interflow.impervious_layer_elevation cannot be null + - interflow.impervious_layer_elevation cannot be null * - 0419 - Warning - - v2_interflow.hydraulic_conductivity is recommended as fallback value when using a hydraulic_conductivity_file. + - interflow.hydraulic_conductivity is recommended as fallback value when using a hydraulic_conductivity_file. * - 0419 - Error - - v2_interflow.hydraulic_conductivity must be defined when not using a hydraulic_conductivity_file. + - interflow.hydraulic_conductivity must be defined when not using a hydraulic_conductivity_file. * - 0420 - Error - - v2_groundwater.phreatic_storage_capacity is <0 and/or >1 + - groundwater.phreatic_storage_capacity is <0 and/or >1 * - 0421 - Error - - v2_groundwater.groundwater_hydro_connectivity is <0 + - groundwater.groundwater_hydraulic_conductivity is <0 * - 0422 - Error - - v2_simple_infiltration.max_infiltration_capacity is <0 + - simple_infiltration.max_infiltration_volume is <0 * - 0423 - Warning - - v2_simple_infiltration.max_infiltration_capacity is recommended as fallback value when using an max_infiltration_capacity_file. + - simple_infiltration.max_infiltration_volume is recommended as fallback value when using an max_infiltration_volume_file. * - 0424 - Error - - v2_interflow.hydraulic_conductivity is <0 + - interflow.hydraulic_conductivity is <0 * - 0425 - Error - - v2_groundwater.initial_infiltration_rate is <0 + - groundwater.initial_infiltration_rate is <0 * - 0426 - Error - - v2_groundwater.equilibrium_infiltration_rate is <0 + - groundwater.equilibrium_infiltration_rate is <0 * - 0427 - Error - - v2_groundwater.infiltration_decay_period is <=0 + - groundwater.infiltration_decay_period is <=0 * - 0428 - Warning - - v2_groundwater.groundwater_hydro_connectivity is recommended as fallback value when using a groundwater_hydro_connectivity_file. + - groundwater.groundwater_hydraulic_conductivity is recommended as fallback value when using a groundwater_hydraulic_conductivity_file. * - 0429 - Error - - v2_manhole.exchange_thickness is <=0 + - connection_node.exchange_thickness is <=0 * - 0430 - Error - - v2_manhole.hydraulic_conductivity_in is <0 + - connection_node.hydraulic_conductivity_in is <0 * - 0431 - Error - - v2_manhole.hydraulic_conductivity_out is <0 + - connection_node.hydraulic_conductivity_out is <0 * - 0432 - Error - - v2_channel.exchange_thickness is <=0 + - channel.exchange_thickness is <=0 * - 0433 - Error - - v2_channel.hydraulic_conductivity_in is <0 + - channel.hydraulic_conductivity_in is <0 * - 0434 - Error - - v2_channel.hydraulic_conductivity_out is <0 + - channel.hydraulic_conductivity_out is <0 * - 0435 - Error - - v2_pipe.exchange_thickness is <=0 + - pipe.exchange_thickness is <=0 * - 0436 - Error - - v2_pipe.hydraulic_conductivity_in is <0 + - pipe.hydraulic_conductivity_in is <0 * - 0437 - Error - - v2_pipe.hydraulic_conductivity_out is <0 + - pipe.hydraulic_conductivity_out is <0 * - 0501 - Error - - v2_vegetation_drag.vegetation_height is <=0 + - vegetation_drag_2d.vegetation_height is <=0 * - 0502 - Error - - v2_vegetation_drag.height must be defined. + - vegetation_drag.height must be defined. * - 0503 - Warning - - v2_vegetation_drag.height is recommended as fallback value when using a vegetation_height_file. + - vegetation_drag.height is recommended as fallback value when using a vegetation_height_file. * - 0504 - Error - - v2_vegetation_drag.vegetation_stem_count is <=0 + - vegetation_drag_2d.vegetation_stem_count is <=0 * - 0505 - Error - - v2_vegetation_drag.vegetation_stem_count must be defined. + - vegetation_drag.vegetation_stem_count must be defined. * - 0506 - Warning - - v2_vegetation_drag.vegetation_stem_count is recommended as fallback value when using a vegetation_stem_count_file. + - vegetation_drag.vegetation_stem_count is recommended as fallback value when using a vegetation_stem_count_file. * - 0507 - Error - - v2_vegetation_drag.vegetation_stem_diameter is <=0 + - vegetation_drag_2d.vegetation_stem_diameter is <=0 * - 0508 - Error - - v2_vegetation_drag.vegetation_stem_diameter must be defined. + - vegetation_drag.vegetation_stem_diameter must be defined. * - 0509 - Warning - - v2_vegetation_drag.vegetation_stem_diameter is recommended as fallback value when using a vegetation_stem_diameter_file. + - vegetation_drag.vegetation_stem_diameter is recommended as fallback value when using a vegetation_stem_diameter_file. * - 0510 - Error - - v2_vegetation_drag.vegetation_drag_coefficient is <=0 + - vegetation_drag_2d.vegetation_drag_coefficient is <=0 * - 0511 - Error - - v2_vegetation_drag.vegetation_drag_coefficient must be defined. + - vegetation_drag.vegetation_drag_coefficient must be defined. * - 0512 - Warning - - v2_vegetation_drag.vegetation_drag_coefficient is recommended as fallback value when using a vegetation_drag_coefficient_file. + - vegetation_drag.vegetation_drag_coefficient is recommended as fallback value when using a vegetation_drag_coefficient_file. * - 0601 - Error - - v2_impervious_surface.area is <0 - * - 0601 - - Error - - v2_surface.area is <0 - * - 0602 - - Warning - - v2_impervious_surface.dry_weather_flow is <0 + - dry_weather_flow.multiplier is <0 * - 0602 - - Warning - - v2_surface.dry_weather_flow is <0 - * - 0603 - Error - - v2_impervious_surface_map.percentage is <0 + - dry_weather_flow.daily_total is <0 * - 0603 - Error - - v2_surface_map.percentage is <0 - * - 0604 - - Warning - - v2_impervious_surface_map.percentage is >100 + - surface.area is <0 * - 0604 - - Warning - - v2_surface_map.percentage is >100 - * - 0605 - Error - - v2_impervious_surface.nr_of_inhabitants is <0 - * - 0605 + - dry_weather_flow_map.percentage is <0 + * - 0604 - Error - - v2_surface.nr_of_inhabitants is <0 + - surface_map.percentage is <0 * - 0606 - Error - - v2_surface_parameters.outflow_delay is <0 + - surface_parameters.outflow_delay is <0 * - 0607 - Error - - v2_surface_parameters.max_infiltration_capacity is <0 + - surface_parameters.outflow_delay is <0 * - 0608 - Error - - v2_surface_parameters.min_infiltration_capacity is <0 + - surface_parameters.outflow_delay is <0 * - 0609 - Error - - v2_surface_parameters.infiltration_decay_constant is <0 + - surface_parameters.outflow_delay is <0 * - 0610 - Error - - v2_surface_parameters.infiltration_recovery_constant is <0 + - surface_parameters.outflow_delay is <0 * - 0611 - Warning - - When v2_global_settings.use_0d_inflow is used, there should exist at least one (impervious) surface. + - When simulation_template_settings.use_0d_inflow is used, there should exist at least one surface. * - 0612 - Warning - - v2_impervious_surface_map will be ignored because it is connected to a 1D boundary condition. + - dry_weather_flow_map will be ignored because it is connected to a 1D boundary condition. * - 0612 - Warning - - v2_surface_map will be ignored because it is connected to a 1D boundary condition. + - surface_map will be ignored because it is connected to a 1D boundary condition. * - 0613 - Warning - - v2_connection_nodes.id has a an associated inflow area larger than 10000 m2; this might be an error. - * - 0613 - - Warning - - v2_connection_nodes.id has a an associated inflow area larger than 10000 m2; this might be an error. - * - 0614 - - Warning - - v2_connection_nodes.id has more than 50 surface areas mapped to it; this might be an error. + - connection_node.id has a an associated inflow area larger than 10000 m2; this might be an error. * - 0614 - Warning - - v2_connection_nodes.id has more than 50 surface areas mapped to it; this might be an error. - * - 0615 - - Warning - - v2_impervious_surface_map.connection_node_id references a v2_connection_nodes feature that does not exist. - * - 0615 - - Warning - - v2_impervious_surface_map.impervious_surface_id references a v2_impervious_surface feature that does not exist. - * - 0615 - - Warning - - v2_surface_map.connection_node_id references a v2_connection_nodes feature that does not exist. - * - 0615 - - Warning - - v2_surface_map.surface_id references a v2_surface feature that does not exist. + - connection_node.id has more than 50 surface areas mapped to it; this might be an error. * - 0616 - Warning - - No inflow will be generated for this feature, because v2_global_settings.use_0d_inflow is not set to use v2_impervious_surface. + - No inflow will be generated for this feature, because model_settings.use_0d_inflow is not set to use dry_weather_flow. * - 0616 - Warning - - No inflow will be generated for this feature, because v2_global_settings.use_0d_inflow is not set to use v2_surface. + - No inflow will be generated for this feature, because model_settings.use_0d_inflow is not set to use surface. * - 0617 - Warning - - v2_global_settings.use_0d_inflow is set to use v2_impervious_surface, but v2_impervious_surface does not contain any features. + - model_settings.use_0d_inflow is set to use dry_weather_flow, but dry_weather_flow does not contain any features. * - 0617 - Warning - - v2_global_settings.use_0d_inflow is set to use v2_surface, but v2_surface does not contain any features. + - model_settings.use_0d_inflow is set to use surface, but surface does not contain any features. + * - 0618 + - Warning + - surface.area cannot be Null + * - 0619 + - Warning + - dry_weather_flow.multiplier cannot be Null + * - 0620 + - Warning + - dry_weather_flow.daily_total cannot be Null + * - 0621 + - Error + - dry_weather_flow_distribution.dry_weather_flow_distribution.distribution should contain a list of comma-separated numbers + * - 0622 + - Error + - dry_weather_flow_distribution.dry_weather_flow_distribution.distribution should contain exactly 24 values + * - 0623 + - Error + - The values in dry_weather_flow_distribution.dry_weather_flow_distribution.distribution should add up to * - 0700 - Warning - raster checks require GDAL to be available * - 0701 - Error - - The file in v2_global_settings.dem_file is not present + - The file in model_settings.dem_file is not present * - 0702 - Error - - The file in v2_global_settings.frict_coef_file is not present + - The file in model_settings.friction_coefficient_file is not present * - 0703 - Error - - The file in v2_global_settings.interception_file is not present + - The file in interception.interception_file is not present * - 0704 - Error - - The file in v2_interflow.porosity_file is not present + - The file in interflow.porosity_file is not present * - 0705 - Error - - The file in v2_interflow.hydraulic_conductivity_file is not present + - The file in interflow.hydraulic_conductivity_file is not present * - 0706 - Error - - The file in v2_simple_infiltration.infiltration_rate_file is not present + - The file in simple_infiltration.infiltration_rate_file is not present * - 0707 - Error - - The file in v2_simple_infiltration.max_infiltration_capacity_file is not present + - The file in simple_infiltration.max_infiltration_volume_file is not present * - 0708 - Error - - The file in v2_groundwater.groundwater_impervious_layer_level_file is not present + - The file in groundwater.groundwater_impervious_layer_level_file is not present * - 0709 - Error - - The file in v2_groundwater.phreatic_storage_capacity_file is not present + - The file in groundwater.phreatic_storage_capacity_file is not present * - 0710 - Error - - The file in v2_groundwater.equilibrium_infiltration_rate_file is not present + - The file in groundwater.equilibrium_infiltration_rate_file is not present * - 0711 - Error - - The file in v2_groundwater.initial_infiltration_rate_file is not present + - The file in groundwater.initial_infiltration_rate_file is not present * - 0712 - Error - - The file in v2_groundwater.infiltration_decay_period_file is not present + - The file in groundwater.infiltration_decay_period_file is not present * - 0713 - Error - - The file in v2_groundwater.groundwater_hydro_connectivity_file is not present + - The file in groundwater.groundwater_hydraulic_conductivity_file is not present * - 0714 - Error - - The file in v2_groundwater.leakage_file is not present + - The file in groundwater.leakage_file is not present * - 0715 - Error - - The file in v2_global_settings.initial_waterlevel_file is not present + - The file in initial_conditions.initial_water_level_file is not present * - 0716 - Error - - The file in v2_global_settings.initial_groundwater_level_file is not present + - The file in initial_conditions.initial_groundwater_level_file is not present * - 0717 - Error - - The file in v2_vegetation_drag.vegetation_height_file is not present + - The file in vegetation_drag_2d.vegetation_height_file is not present * - 0718 - Error - - The file in v2_vegetation_drag.vegetation_stem_count_file is not present + - The file in vegetation_drag_2d.vegetation_stem_count_file is not present * - 0719 - Error - - The file in v2_vegetation_drag.vegetation_stem_diameter_file is not present + - The file in vegetation_drag_2d.vegetation_stem_diameter_file is not present * - 0720 - Error - - The file in v2_vegetation_drag.vegetation_drag_coefficient_file is not present + - The file in vegetation_drag_2d.vegetation_drag_coefficient_file is not present * - 0721 - Error - - The file in v2_global_settings.dem_file is not a valid GeoTIFF file + - The file in model_settings.dem_file is not a valid GeoTIFF file * - 0722 - Error - - The file in v2_global_settings.frict_coef_file is not a valid GeoTIFF file + - The file in model_settings.friction_coefficient_file is not a valid GeoTIFF file * - 0723 - Error - - The file in v2_global_settings.interception_file is not a valid GeoTIFF file + - The file in interception.interception_file is not a valid GeoTIFF file * - 0724 - Error - - The file in v2_interflow.porosity_file is not a valid GeoTIFF file + - The file in interflow.porosity_file is not a valid GeoTIFF file * - 0725 - Error - - The file in v2_interflow.hydraulic_conductivity_file is not a valid GeoTIFF file + - The file in interflow.hydraulic_conductivity_file is not a valid GeoTIFF file * - 0726 - Error - - The file in v2_simple_infiltration.infiltration_rate_file is not a valid GeoTIFF file + - The file in simple_infiltration.infiltration_rate_file is not a valid GeoTIFF file * - 0727 - Error - - The file in v2_simple_infiltration.max_infiltration_capacity_file is not a valid GeoTIFF file + - The file in simple_infiltration.max_infiltration_volume_file is not a valid GeoTIFF file * - 0728 - Error - - The file in v2_groundwater.groundwater_impervious_layer_level_file is not a valid GeoTIFF file + - The file in groundwater.groundwater_impervious_layer_level_file is not a valid GeoTIFF file * - 0729 - Error - - The file in v2_groundwater.phreatic_storage_capacity_file is not a valid GeoTIFF file + - The file in groundwater.phreatic_storage_capacity_file is not a valid GeoTIFF file * - 0730 - Error - - The file in v2_groundwater.equilibrium_infiltration_rate_file is not a valid GeoTIFF file + - The file in groundwater.equilibrium_infiltration_rate_file is not a valid GeoTIFF file * - 0731 - Error - - The file in v2_groundwater.initial_infiltration_rate_file is not a valid GeoTIFF file + - The file in groundwater.initial_infiltration_rate_file is not a valid GeoTIFF file * - 0732 - Error - - The file in v2_groundwater.infiltration_decay_period_file is not a valid GeoTIFF file + - The file in groundwater.infiltration_decay_period_file is not a valid GeoTIFF file * - 0733 - Error - - The file in v2_groundwater.groundwater_hydro_connectivity_file is not a valid GeoTIFF file + - The file in groundwater.groundwater_hydraulic_conductivity_file is not a valid GeoTIFF file * - 0734 - Error - - The file in v2_groundwater.leakage_file is not a valid GeoTIFF file + - The file in groundwater.leakage_file is not a valid GeoTIFF file * - 0735 - Error - - The file in v2_global_settings.initial_waterlevel_file is not a valid GeoTIFF file + - The file in initial_conditions.initial_water_level_file is not a valid GeoTIFF file * - 0736 - Error - - The file in v2_global_settings.initial_groundwater_level_file is not a valid GeoTIFF file + - The file in initial_conditions.initial_groundwater_level_file is not a valid GeoTIFF file * - 0737 - Error - - The file in v2_vegetation_drag.vegetation_height_file is not a valid GeoTIFF file + - The file in vegetation_drag_2d.vegetation_height_file is not a valid GeoTIFF file * - 0738 - Error - - The file in v2_vegetation_drag.vegetation_stem_count_file is not a valid GeoTIFF file + - The file in vegetation_drag_2d.vegetation_stem_count_file is not a valid GeoTIFF file * - 0739 - Error - - The file in v2_vegetation_drag.vegetation_stem_diameter_file is not a valid GeoTIFF file + - The file in vegetation_drag_2d.vegetation_stem_diameter_file is not a valid GeoTIFF file * - 0740 - Error - - The file in v2_vegetation_drag.vegetation_drag_coefficient_file is not a valid GeoTIFF file + - The file in vegetation_drag_2d.vegetation_drag_coefficient_file is not a valid GeoTIFF file * - 0741 - Warning - - The file in v2_global_settings.dem_file has multiple or no bands. + - The file in model_settings.dem_file has multiple or no bands. * - 0742 - Warning - - The file in v2_global_settings.frict_coef_file has multiple or no bands. + - The file in model_settings.friction_coefficient_file has multiple or no bands. * - 0743 - Warning - - The file in v2_global_settings.interception_file has multiple or no bands. + - The file in interception.interception_file has multiple or no bands. * - 0744 - Warning - - The file in v2_interflow.porosity_file has multiple or no bands. + - The file in interflow.porosity_file has multiple or no bands. * - 0745 - Warning - - The file in v2_interflow.hydraulic_conductivity_file has multiple or no bands. + - The file in interflow.hydraulic_conductivity_file has multiple or no bands. * - 0746 - Warning - - The file in v2_simple_infiltration.infiltration_rate_file has multiple or no bands. + - The file in simple_infiltration.infiltration_rate_file has multiple or no bands. * - 0747 - Warning - - The file in v2_simple_infiltration.max_infiltration_capacity_file has multiple or no bands. + - The file in simple_infiltration.max_infiltration_volume_file has multiple or no bands. * - 0748 - Warning - - The file in v2_groundwater.groundwater_impervious_layer_level_file has multiple or no bands. + - The file in groundwater.groundwater_impervious_layer_level_file has multiple or no bands. * - 0749 - Warning - - The file in v2_groundwater.phreatic_storage_capacity_file has multiple or no bands. + - The file in groundwater.phreatic_storage_capacity_file has multiple or no bands. * - 0750 - Warning - - The file in v2_groundwater.equilibrium_infiltration_rate_file has multiple or no bands. + - The file in groundwater.equilibrium_infiltration_rate_file has multiple or no bands. * - 0751 - Warning - - The file in v2_groundwater.initial_infiltration_rate_file has multiple or no bands. + - The file in groundwater.initial_infiltration_rate_file has multiple or no bands. * - 0752 - Warning - - The file in v2_groundwater.infiltration_decay_period_file has multiple or no bands. + - The file in groundwater.infiltration_decay_period_file has multiple or no bands. * - 0753 - Warning - - The file in v2_groundwater.groundwater_hydro_connectivity_file has multiple or no bands. + - The file in groundwater.groundwater_hydraulic_conductivity_file has multiple or no bands. * - 0754 - Warning - - The file in v2_groundwater.leakage_file has multiple or no bands. + - The file in groundwater.leakage_file has multiple or no bands. * - 0755 - Warning - - The file in v2_global_settings.initial_waterlevel_file has multiple or no bands. + - The file in initial_conditions.initial_water_level_file has multiple or no bands. * - 0756 - Warning - - The file in v2_global_settings.initial_groundwater_level_file has multiple or no bands. + - The file in initial_conditions.initial_groundwater_level_file has multiple or no bands. * - 0757 - Warning - - The file in v2_vegetation_drag.vegetation_height_file has multiple or no bands. + - The file in vegetation_drag_2d.vegetation_height_file has multiple or no bands. * - 0758 - Warning - - The file in v2_vegetation_drag.vegetation_stem_count_file has multiple or no bands. + - The file in vegetation_drag_2d.vegetation_stem_count_file has multiple or no bands. * - 0759 - Warning - - The file in v2_vegetation_drag.vegetation_stem_diameter_file has multiple or no bands. + - The file in vegetation_drag_2d.vegetation_stem_diameter_file has multiple or no bands. * - 0760 - Warning - - The file in v2_vegetation_drag.vegetation_drag_coefficient_file has multiple or no bands. - * - 0761 - - Error - - The file in v2_global_settings.dem_file has no CRS. - * - 0762 - - Error - - The file in v2_global_settings.frict_coef_file has no CRS. - * - 0763 - - Error - - The file in v2_global_settings.interception_file has no CRS. - * - 0764 - - Error - - The file in v2_interflow.porosity_file has no CRS. - * - 0765 - - Error - - The file in v2_interflow.hydraulic_conductivity_file has no CRS. - * - 0766 - - Error - - The file in v2_simple_infiltration.infiltration_rate_file has no CRS. - * - 0767 - - Error - - The file in v2_simple_infiltration.max_infiltration_capacity_file has no CRS. - * - 0768 - - Error - - The file in v2_groundwater.groundwater_impervious_layer_level_file has no CRS. - * - 0769 - - Error - - The file in v2_groundwater.phreatic_storage_capacity_file has no CRS. - * - 0770 - - Error - - The file in v2_groundwater.equilibrium_infiltration_rate_file has no CRS. - * - 0771 - - Error - - The file in v2_groundwater.initial_infiltration_rate_file has no CRS. - * - 0772 - - Error - - The file in v2_groundwater.infiltration_decay_period_file has no CRS. - * - 0773 - - Error - - The file in v2_groundwater.groundwater_hydro_connectivity_file has no CRS. - * - 0774 - - Error - - The file in v2_groundwater.leakage_file has no CRS. - * - 0775 - - Error - - The file in v2_global_settings.initial_waterlevel_file has no CRS. - * - 0776 - - Error - - The file in v2_global_settings.initial_groundwater_level_file has no CRS. - * - 0777 - - Error - - The file in v2_vegetation_drag.vegetation_height_file has no CRS. - * - 0778 - - Error - - The file in v2_vegetation_drag.vegetation_stem_count_file has no CRS. - * - 0779 - - Error - - The file in v2_global_settings.dem_file does not use a projected CRS. - * - 0779 - - Error - - The file in v2_vegetation_drag.vegetation_stem_diameter_file has no CRS. - * - 0780 - - Error - - The file in v2_vegetation_drag.vegetation_drag_coefficient_file has no CRS. + - The file in vegetation_drag_2d.vegetation_drag_coefficient_file has multiple or no bands. * - 0780 - Error - - The raster in v2_global_settings.dem_file has non-square raster cells. + - The raster in model_settings.dem_file has non-square raster cells. * - 0781 - Error - - v2_global_settings.dem_file has values <-9998.0 and/or >8848.0 or is empty + - model_settings.dem_file has values <-9998.0 and/or >8848.0 or is empty * - 0782 - Error - - v2_global_settings.frict_coef_file has values <0 and/or >1 or is empty + - model_settings.friction_coefficient_file has values <0 and/or >1 or is empty * - 0783 - Error - - v2_global_settings.frict_coef_file has values <0 or is empty + - model_settings.friction_coefficient_file has values <0 or is empty * - 0784 - Error - - v2_interflow.porosity_file has values <0 and/or >1 or is empty + - interflow.porosity_file has values <0 and/or >1 or is empty * - 0785 - Error - - v2_interflow.hydraulic_conductivity_file has values <0 or is empty + - interflow.hydraulic_conductivity_file has values <0 or is empty * - 0786 - Error - - v2_simple_infiltration.infiltration_rate_file has values <0 or is empty + - simple_infiltration.infiltration_rate_file has values <0 or is empty * - 0787 - Error - - v2_simple_infiltration.max_infiltration_capacity_file has values <0 or is empty + - simple_infiltration.max_infiltration_volume_file has values <0 or is empty * - 0788 - Error - - v2_groundwater.groundwater_impervious_layer_level_file has values <-9998.0 and/or >8848.0 or is empty + - groundwater.groundwater_impervious_layer_level_file has values <-9998.0 and/or >8848.0 or is empty * - 0789 - Error - - v2_groundwater.phreatic_storage_capacity_file has values <0 and/or >1 or is empty + - groundwater.phreatic_storage_capacity_file has values <0 and/or >1 or is empty * - 0790 - Error - - v2_groundwater.equilibrium_infiltration_rate_file has values <0 or is empty + - groundwater.equilibrium_infiltration_rate_file has values <0 or is empty * - 0791 - Error - - v2_groundwater.initial_infiltration_rate_file has values <0 or is empty + - groundwater.initial_infiltration_rate_file has values <0 or is empty * - 0792 - Error - - v2_groundwater.infiltration_decay_period_file has values <=0 or is empty + - groundwater.infiltration_decay_period_file has values <=0 or is empty * - 0793 - Error - - v2_groundwater.groundwater_hydro_connectivity_file has values <0 or is empty + - groundwater.groundwater_hydraulic_conductivity_file has values <0 or is empty * - 0795 - Error - - v2_global_settings.initial_waterlevel_file has values <-9998.0 and/or >8848.0 or is empty + - initial_conditions.initial_water_level_file has values <-9998.0 and/or >8848.0 or is empty * - 0796 - Error - - v2_global_settings.initial_groundwater_level_file has values <-9998.0 and/or >8848.0 or is empty - * - 0797 - - Warning - - The file in v2_global_settings.dem_file has no EPSG code or the EPSG code does not match does not match v2_global_settings.epsg_code + - initial_conditions.initial_groundwater_level_file has values <-9998.0 and/or >8848.0 or is empty * - 0798 - Error - - v2_global_settings.grid_space is not a positive even multiple of the raster cell size. + - model_settings.minimum_cell_size is not a positive even multiple of the raster cell size. + * - 0799 + - Warning + - Some pixels in model_settings.friction_coefficient_file are less than 1, while friction type is Chézy. This may lead to unexpected results. Did you mean to use friction type Manning? * - 0800 - Error - - v2_grid_refinement.refinement_level must not be greater than v2_global_settings.kmax + - grid_refinement_area.refinement_level must not be greater than model_settings.nr_grid_levels * - 0800 - Error - - v2_grid_refinement_area.refinement_level must not be greater than v2_global_settings.kmax + - grid_refinement_line.refinement_level must not be greater than model_settings.nr_grid_levels * - 0801 - Error - - v2_grid_refinement.refinement_level is <1 + - grid_refinement_area.grid_level is <1 * - 0801 - Error - - v2_grid_refinement_area.refinement_level is <1 + - grid_refinement_line.grid_level is <1 * - 0802 - Info - - v2_grid_refinement.refinement_level is equal to v2_global_settings.kmax and will therefore not have any effect. Lower the refinement_level to make the cells smaller. + - grid_refinement_area.refinement_level is equal to model_settings.nr_grid_levels and will therefore not have any effect. Lower the refinement_level to make the cells smaller. * - 0802 - Info - - v2_grid_refinement_area.refinement_level is equal to v2_global_settings.kmax and will therefore not have any effect. Lower the refinement_level to make the cells smaller. + - grid_refinement_line.refinement_level is equal to model_settings.nr_grid_levels and will therefore not have any effect. Lower the refinement_level to make the cells smaller. * - 1101 - Error - - v2_global_settings.maximum_sim_time_step must be greater than or equal to v2_global_settings.sim_time_step + - time_step_settings.max_time_step must be greater than or equal to time_step_settings.time_step * - 1102 - Error - - v2_global_settings.minimum_sim_time_step must be less than or equal to v2_global_settings.sim_time_step + - time_step_settings.mintime_step must be less than or equal to time_step_settings.time_step * - 1103 - Error - - v2_global_settings.output_time_step must be greater than or equal to v2_global_settings.sim_time_step + - time_step_settings.output_time_step must be greater than or equal to time_step_settings.time_step * - 1104 - Error - - v2_global_settings.maximum_sim_time_step cannot be null when v2_global_settings.timestep_plus is True + - time_step_settings.max_time_step cannot be null when time_step_settings.use_time_step_stretch is True * - 1105 - Error - - v2_global_settings.maximum_sim_time_step is <=0 + - time_step_settings.max_time_step is <=0 * - 1105 - Error - - v2_global_settings.minimum_sim_time_step is <=0 + - time_step_settings.min_time_step is <=0 * - 1105 - Error - - v2_global_settings.output_time_step is <=0 + - time_step_settings.output_time_step is <=0 * - 1105 - Error - - v2_global_settings.sim_time_step is <=0 + - time_step_settings.time_step is <=0 * - 1106 - Warning - - v2_global_settings.minimum_sim_time_step should be at least 10 times smaller than v2_global_settings.sim_time_step + - time_step_settings.min_time_step should be at least 10 times smaller than time_step_settings.time_step * - 1110 - Error - - v2_numerical_settings.cfl_strictness_factor_1d is <=0 + - numerical_settings.cfl_strictness_factor_1d is <=0 * - 1111 - Error - - v2_numerical_settings.cfl_strictness_factor_2d is <=0 + - numerical_settings.cfl_strictness_factor_2d is <=0 * - 1112 - Error - - v2_numerical_settings.convergence_eps is <1e-07 and/or >0.0001 + - numerical_settings.convergence_eps is <1e-07 and/or >0.0001 * - 1113 - Error - - v2_numerical_settings.convergence_cg is <1e-12 and/or >1e-07 + - numerical_settings.convergence_cg is <1e-12 and/or >1e-07 * - 1114 - Error - - v2_numerical_settings.flow_direction_threshold is <1e-13 and/or >0.01 + - numerical_settings.flow_direction_threshold is <1e-13 and/or >0.01 * - 1115 - Error - - v2_numerical_settings.general_numerical_threshold is <1e-13 and/or >1e-07 + - numerical_settings.general_numerical_threshold is <1e-13 and/or >1e-07 * - 1116 - Error - - v2_numerical_settings.max_nonlin_iterations is <1 + - numerical_settings.max_non_linear_newton_iterations is <1 * - 1117 - Error - - v2_numerical_settings.max_degree is <1 + - numerical_settings.max_degree_gauss_seidel is <1 * - 1118 - Error - - v2_numerical_settings.minimum_friction_velocity is <0 and/or >1 + - numerical_settings.min_friction_velocity is <0 and/or >1 * - 1119 - Error - - v2_numerical_settings.minimum_surface_area is <1e-13 and/or >1e-07 + - numerical_settings.min_surface_area is <1e-13 and/or >1e-07 * - 1120 - Error - - v2_numerical_settings.preissmann_slot is <0 + - numerical_settings.preissmann_slot is <0 * - 1121 - Error - - v2_numerical_settings.pump_implicit_ratio is <0 and/or >1 + - numerical_settings.pump_implicit_ratio is <0 and/or >1 * - 1122 - Error - - v2_numerical_settings.thin_water_layer_definition is <0 + - numerical_settings.limiter_slope_thin_water_layer is <0 * - 1123 - Error - - v2_numerical_settings.use_of_cg is <1 + - numerical_settings.use_of_cg is <1 * - 1124 - Error - - v2_global_settings.flooding_threshold is <0 and/or >0.05 + - numerical_settings.flooding_threshold is <0 and/or >0.05 * - 1125 - Error - - v2_numerical_settings.thin_water_layer_definition must be greater than 0 when using frict_shallow_water_correction option 3. + - numerical_settings.limiter_slope_thin_water_layer must be greater than 0 when using friction_shallow_water_depth_correction option 3. * - 1126 - Error - - v2_numerical_settings.thin_water_layer_definition must be greater than 0 when using limiter_slope_crossectional_area_2d option 3. + - numerical_settings.limiter_slope_thin_water_layer must be greater than 0 when using limiter_slope_crossectional_area_2d option 3. * - 1127 - Error - - v2_numerical_settings.limiter_slope_friction_2d may not be 0 when using limiter_slope_crossectional_area_2d. + - numerical_settings.limiter_slope_friction_2d may not be 0 when using limiter_slope_crossectional_area_2d. * - 1150 - Error - - v2_aggregation_settings.aggregation_method can only be 'current' for 'volume' or 'interception' flow_variables. + - aggregation_settings.aggregation_method can only be 'current' for 'volume' or 'interception' flow_variables. * - 1151 - Warning - - columns ['aggregation_method', 'flow_variable'] in table v2_aggregation_settings should be unique together + - columns ['aggregation_method', 'flow_variable'] in table aggregation_settings should be unique together * - 1152 - Warning - - v2_aggregation_settings.timestep is different and is ignored if it is not in the first record + - aggregation_settings.interval is different and is ignored if it is not in the first record * - 1153 - Warning - - v2_aggregation_settings.timestep is smaller than v2_global_settings.output_time_step + - aggregation_settings.timestep is smaller than time_step_settings.output_time_step * - 1154 - Warning - - To use the water balance tool, v2_aggregation_settings should have a row where aggregation_method is cum and flow_variable is discharge. + - To use the water balance tool, aggregation_settings should have a row where aggregation_method is cum and flow_variable is discharge. * - 1154 - Warning - - To use the water balance tool, v2_aggregation_settings should have a row where aggregation_method is cum and flow_variable is lateral_discharge. + - To use the water balance tool, aggregation_settings should have a row where aggregation_method is cum and flow_variable is lateral_discharge. * - 1154 - Warning - - To use the water balance tool, v2_aggregation_settings should have a row where aggregation_method is cum and flow_variable is leakage. + - To use the water balance tool, aggregation_settings should have a row where aggregation_method is cum and flow_variable is leakage. * - 1154 - Warning - - To use the water balance tool, v2_aggregation_settings should have a row where aggregation_method is cum and flow_variable is pump_discharge. + - To use the water balance tool, aggregation_settings should have a row where aggregation_method is cum and flow_variable is pump_discharge. * - 1154 - Warning - - To use the water balance tool, v2_aggregation_settings should have a row where aggregation_method is cum and flow_variable is rain. + - To use the water balance tool, aggregation_settings should have a row where aggregation_method is cum and flow_variable is rain. * - 1154 - Warning - - To use the water balance tool, v2_aggregation_settings should have a row where aggregation_method is cum and flow_variable is simple_infiltration. + - To use the water balance tool, aggregation_settings should have a row where aggregation_method is cum and flow_variable is simple_infiltration. * - 1154 - Warning - - To use the water balance tool, v2_aggregation_settings should have a row where aggregation_method is cum_negative and flow_variable is discharge. + - To use the water balance tool, aggregation_settings should have a row where aggregation_method is cum_negative and flow_variable is discharge. * - 1154 - Warning - - To use the water balance tool, v2_aggregation_settings should have a row where aggregation_method is cum_negative and flow_variable is surface_source_sink_discharge. + - To use the water balance tool, aggregation_settings should have a row where aggregation_method is cum_negative and flow_variable is surface_source_sink_discharge. * - 1154 - Warning - - To use the water balance tool, v2_aggregation_settings should have a row where aggregation_method is cum_positive and flow_variable is discharge. + - To use the water balance tool, aggregation_settings should have a row where aggregation_method is cum_positive and flow_variable is discharge. * - 1154 - Warning - - To use the water balance tool, v2_aggregation_settings should have a row where aggregation_method is cum_positive and flow_variable is surface_source_sink_discharge. + - To use the water balance tool, aggregation_settings should have a row where aggregation_method is cum_positive and flow_variable is surface_source_sink_discharge. * - 1154 - Warning - - To use the water balance tool, v2_aggregation_settings should have a row where aggregation_method is current and flow_variable is interception. + - To use the water balance tool, aggregation_settings should have a row where aggregation_method is current and flow_variable is interception. * - 1154 - Warning - - To use the water balance tool, v2_aggregation_settings should have a row where aggregation_method is current and flow_variable is volume. + - To use the water balance tool, aggregation_settings should have a row where aggregation_method is current and flow_variable is volume. * - 1200 - Error - - v2_1d_boundary_conditions.timeseries must contain 2 elements per line separated by a comma + - boundary_condition_1d.timeseries must contain 2 elements per line separated by a comma * - 1200 - Error - - v2_1d_lateral.timeseries must contain 2 elements per line separated by a comma + - boundary_condition_2d.timeseries must contain 2 elements per line separated by a comma * - 1200 - Error - - v2_2d_boundary_conditions.timeseries must contain 2 elements per line separated by a comma + - lateral_1d.timeseries must contain 2 elements per line separated by a comma * - 1200 - Error - - v2_2d_lateral.timeseries must contain 2 elements per line separated by a comma + - lateral_2d.timeseries must contain 2 elements per line separated by a comma * - 1201 - Error - - v2_1d_boundary_conditions.timeseries contains an invalid timestep, expected an integer >= 0 + - boundary_condition_1d.timeseries contains an invalid timestep, expected an integer >= 0 * - 1201 - Error - - v2_1d_lateral.timeseries contains an invalid timestep, expected an integer >= 0 + - boundary_condition_2d.timeseries contains an invalid timestep, expected an integer >= 0 * - 1201 - Error - - v2_2d_boundary_conditions.timeseries contains an invalid timestep, expected an integer >= 0 + - lateral_1d.timeseries contains an invalid timestep, expected an integer >= 0 * - 1201 - Error - - v2_2d_lateral.timeseries contains an invalid timestep, expected an integer >= 0 + - lateral_2d.timeseries contains an invalid timestep, expected an integer >= 0 * - 1202 - Error - - v2_1d_boundary_conditions.timeseries contains an invalid value, expected a float + - boundary_condition_1d.timeseries contains an invalid value, expected a float * - 1202 - Error - - v2_1d_lateral.timeseries contains an invalid value, expected a float + - boundary_condition_2d.timeseries contains an invalid value, expected a float * - 1202 - Error - - v2_2d_boundary_conditions.timeseries contains an invalid value, expected a float + - lateral_1d.timeseries contains an invalid value, expected a float * - 1202 - Error - - v2_2d_lateral.timeseries contains an invalid value, expected a float + - lateral_2d.timeseries contains an invalid value, expected a float * - 1203 - Error - - v2_1d_boundary_conditions.timeseries should be monotonically increasing + - boundary_condition_1d.timeseries should be monotonically increasing * - 1203 - Error - - v2_1d_lateral.timeseries should be monotonically increasing + - boundary_condition_2d.timeseries should be monotonically increasing * - 1203 - Error - - v2_2d_boundary_conditions.timeseries should be monotonically increasing + - lateral_1d.timeseries should be monotonically increasing * - 1203 - Error - - v2_2d_lateral.timeseries should be monotonically increasing + - lateral_2d.timeseries should be monotonically increasing * - 1204 - Error - - v2_1d_boundary_conditions.timeseries should be start at timestamp 0 + - boundary_condition_1d.timeseries should be start at timestamp 0 * - 1204 - Error - - v2_2d_boundary_conditions.timeseries should be start at timestamp 0 + - boundary_condition_2d.timeseries should be start at timestamp 0 * - 1205 - Error - - v2_1d_boundary_conditions.timeseries contains an empty timeseries; remove the v2_1d_boundary_conditions instance or provide valid timeseries. + - boundary_condition_1d.timeseries contains an empty timeseries; remove the boundary_condition_1d instance or provide valid timeseries. * - 1205 - Error - - v2_2d_boundary_conditions.timeseries contains an empty timeseries; remove the v2_2d_boundary_conditions instance or provide valid timeseries. + - boundary_condition_2d.timeseries contains an empty timeseries; remove the boundary_condition_2d instance or provide valid timeseries. * - 1206 - Error - - One or more timesteps in v2_1d_boundary_conditions.timeseries did not match the timesteps in the first timeseries in the column.The timesteps in all timeseries must be the same. + - One or more timesteps in boundary_condition_1d.timeseries did not match the timesteps in the first timeseries in the column.The timesteps in all timeseries must be the same. * - 1206 - Error - - One or more timesteps in v2_2d_boundary_conditions.timeseries did not match the timesteps in the first timeseries in the column.The timesteps in all timeseries must be the same. + - One or more timesteps in boundary_condition_2d.timeseries did not match the timesteps in the first timeseries in the column.The timesteps in all timeseries must be the same. * - 1206 - Error - - The timesteps for the first v2_1d_boundary_conditions.timeseries did not match the timesteps for the first v2_2d_boundary_conditions.timeseries. All boundary conditions must have the same timesteps in their timeseries. - * - 1220 - - Error - - v2_control_measure_map.object_id refers to a non-existing v2_connection_nodes - * - 1221 - - Error - - v2_control_memory.target_id refers to a non-existing v2_channel - * - 1221 - - Error - - v2_control_table.target_id refers to a non-existing v2_channel - * - 1222 - - Error - - v2_control_memory.target_id refers to a non-existing v2_pipe - * - 1222 - - Error - - v2_control_table.target_id refers to a non-existing v2_pipe - * - 1223 - - Error - - v2_control_memory.target_id refers to a non-existing v2_orifice - * - 1223 - - Error - - v2_control_table.target_id refers to a non-existing v2_orifice - * - 1224 - - Error - - v2_control_memory.target_id refers to a non-existing v2_culvert - * - 1224 - - Error - - v2_control_table.target_id refers to a non-existing v2_culvert - * - 1225 - - Error - - v2_control_memory.target_id refers to a non-existing v2_weir - * - 1225 - - Error - - v2_control_table.target_id refers to a non-existing v2_weir - * - 1226 + - The timesteps for the first boundary_condition_1d.timeseries did not match the timesteps for the first boundary_condition_2d.timeseries. All boundary conditions must have the same timesteps in their timeseries. + * - 1227 - Error - - v2_control_memory.target_id refers to a non-existing v2_pumpstation - * - 1226 + - control_measure_map.control_id references an id in memory_control or table_control, but the table it references does not contain an entry with that id. + * - 1229 - Error - - v2_control_table.target_id refers to a non-existing v2_pumpstation - * - 1227 + - memory_control is mapped to measure locations with different measure variables + * - 1229 - Error - - v2_control.control_id references an id in v2_control_memory or v2_control_table, but the table it references does not contain an entry with that id. + - table_control is mapped to measure locations with different measure variables * - 1401 - Error - - v2_vegetation_drag.vegetation_height_file has values <0 or is empty + - vegetation_drag_2d.vegetation_height_file has values <0 or is empty * - 1402 - Error - - v2_vegetation_drag.vegetation_stem_count_file has values <0 or is empty + - vegetation_drag_2d.vegetation_stem_count_file has values <0 or is empty * - 1403 - Error - - v2_vegetation_drag.vegetation_stem_diameter_file has values <0 or is empty + - vegetation_drag_2d.vegetation_stem_diameter_file has values <0 or is empty * - 1404 - Error - - v2_vegetation_drag.vegetation_drag_coefficient_file has values <0 or is empty + - vegetation_drag_2d.vegetation_drag_coefficient_file has values <0 or is empty * - 1405 - Error - - The file in v2_global_settings.dem_file exceeds 5000000000.0 pixels. + - The file in model_settings.dem_file exceeds 5000000000.0 pixels. + * - 1406 + - Info + - Raster groundwater.equilibrium_infiltration_rate_file is not compressed. It is recommended to use DEFLATE compression. This speeds up uploading and downloading and reduces storage space. + * - 1406 + - Info + - Raster groundwater.groundwater_hydraulic_conductivity_file is not compressed. It is recommended to use DEFLATE compression. This speeds up uploading and downloading and reduces storage space. + * - 1406 + - Info + - Raster groundwater.groundwater_impervious_layer_level_file is not compressed. It is recommended to use DEFLATE compression. This speeds up uploading and downloading and reduces storage space. + * - 1406 + - Info + - Raster groundwater.infiltration_decay_period_file is not compressed. It is recommended to use DEFLATE compression. This speeds up uploading and downloading and reduces storage space. + * - 1406 + - Info + - Raster groundwater.initial_infiltration_rate_file is not compressed. It is recommended to use DEFLATE compression. This speeds up uploading and downloading and reduces storage space. + * - 1406 + - Info + - Raster groundwater.leakage_file is not compressed. It is recommended to use DEFLATE compression. This speeds up uploading and downloading and reduces storage space. + * - 1406 + - Info + - Raster groundwater.phreatic_storage_capacity_file is not compressed. It is recommended to use DEFLATE compression. This speeds up uploading and downloading and reduces storage space. + * - 1406 + - Info + - Raster initial_conditions.initial_groundwater_level_file is not compressed. It is recommended to use DEFLATE compression. This speeds up uploading and downloading and reduces storage space. + * - 1406 + - Info + - Raster initial_conditions.initial_water_level_file is not compressed. It is recommended to use DEFLATE compression. This speeds up uploading and downloading and reduces storage space. + * - 1406 + - Info + - Raster interception.interception_file is not compressed. It is recommended to use DEFLATE compression. This speeds up uploading and downloading and reduces storage space. + * - 1406 + - Info + - Raster interflow.hydraulic_conductivity_file is not compressed. It is recommended to use DEFLATE compression. This speeds up uploading and downloading and reduces storage space. + * - 1406 + - Info + - Raster interflow.porosity_file is not compressed. It is recommended to use DEFLATE compression. This speeds up uploading and downloading and reduces storage space. + * - 1406 + - Info + - Raster model_settings.dem_file is not compressed. It is recommended to use DEFLATE compression. This speeds up uploading and downloading and reduces storage space. + * - 1406 + - Info + - Raster model_settings.friction_coefficient_file is not compressed. It is recommended to use DEFLATE compression. This speeds up uploading and downloading and reduces storage space. + * - 1406 + - Info + - Raster simple_infiltration.infiltration_rate_file is not compressed. It is recommended to use DEFLATE compression. This speeds up uploading and downloading and reduces storage space. + * - 1406 + - Info + - Raster simple_infiltration.max_infiltration_volume_file is not compressed. It is recommended to use DEFLATE compression. This speeds up uploading and downloading and reduces storage space. + * - 1406 + - Info + - Raster vegetation_drag_2d.vegetation_drag_coefficient_file is not compressed. It is recommended to use DEFLATE compression. This speeds up uploading and downloading and reduces storage space. + * - 1406 + - Info + - Raster vegetation_drag_2d.vegetation_height_file is not compressed. It is recommended to use DEFLATE compression. This speeds up uploading and downloading and reduces storage space. + * - 1406 + - Info + - Raster vegetation_drag_2d.vegetation_stem_count_file is not compressed. It is recommended to use DEFLATE compression. This speeds up uploading and downloading and reduces storage space. + * - 1406 + - Info + - Raster vegetation_drag_2d.vegetation_stem_diameter_file is not compressed. It is recommended to use DEFLATE compression. This speeds up uploading and downloading and reduces storage space. * - 1500 - Warning - - v2_cross_section_location.friction_value is less than 1 while CHEZY friction is selected. This may cause nonsensical results. + - cross_section_location.friction_value is less than 1, while friction type is Chézy. This may lead to unexpected results. Did you mean to use friction type Manning? * - 1500 - Warning - - v2_culvert.friction_value is less than 1 while CHEZY friction is selected. This may cause nonsensical results. + - culvert.friction_value is less than 1, while friction type is Chézy. This may lead to unexpected results. Did you mean to use friction type Manning? * - 1500 - Warning - - v2_orifice.friction_value is less than 1 while CHEZY friction is selected. This may cause nonsensical results. + - orifice.friction_value is less than 1, while friction type is Chézy. This may lead to unexpected results. Did you mean to use friction type Manning? * - 1500 - Warning - - v2_pipe.friction_value is less than 1 while CHEZY friction is selected. This may cause nonsensical results. + - pipe.friction_value is less than 1, while friction type is Chézy. This may lead to unexpected results. Did you mean to use friction type Manning? * - 1500 - Warning - - v2_weir.friction_value is less than 1 while CHEZY friction is selected. This may cause nonsensical results. + - weir.friction_value is less than 1, while friction type is Chézy. This may lead to unexpected results. Did you mean to use friction type Manning? * - 1501 - Warning - - Some values in CrossSectionDefinition.friction_values are less than 1 while CHEZY friction is selected. This may cause nonsensical results. \ No newline at end of file + - Some values in cross_section_location.cross_section_friction_values are less than 1 while CHEZY friction is selected. This may cause nonsensical results. + * - 1601 + - Error + - material.friction_coefficient cannot be null + * - 1602 + - Error + - material.friction_type cannot be null + * - 1603 + - Error + - material.friction_coefficient is <0 + * - 1604 + - Warning + - material.friction_coefficient is not less than 1 while MANNING friction is selected. CHEZY friction will be used instead. In the future this will lead to an error. + * - 1605 + - Warning + - material.friction_coefficient is less than 1, while friction type is Chézy. This may lead to unexpected results. Did you mean to use friction type Manning? + * - 2001 + - Warning + - boundary_condition_1d.BoundaryCondition1D.tags is not a comma seperated list of integers + * - 2002 + - Warning + - boundary_condition_2d.BoundaryConditions2D.tags is not a comma seperated list of integers + * - 2003 + - Warning + - channel.Channel.tags is not a comma seperated list of integers + * - 2004 + - Warning + - connection_node.ConnectionNode.tags is not a comma seperated list of integers + * - 2005 + - Warning + - measure_location.ControlMeasureLocation.tags is not a comma seperated list of integers + * - 2006 + - Warning + - measure_map.ControlMeasureMap.tags is not a comma seperated list of integers + * - 2007 + - Warning + - boundary_condition_1d.BoundaryCondition1D.tags refers to tag ids that are not present in Tags, + * - 2007 + - Warning + - memory_control.ControlMemory.tags is not a comma seperated list of integers + * - 2008 + - Warning + - boundary_condition_2d.BoundaryConditions2D.tags refers to tag ids that are not present in Tags, + * - 2008 + - Warning + - table_control.ControlTable.tags is not a comma seperated list of integers + * - 2009 + - Warning + - channel.Channel.tags refers to tag ids that are not present in Tags, + * - 2009 + - Warning + - cross_section_location.CrossSectionLocation.tags is not a comma seperated list of integers + * - 2010 + - Warning + - connection_node.ConnectionNode.tags refers to tag ids that are not present in Tags, + * - 2010 + - Warning + - culvert.Culvert.tags is not a comma seperated list of integers + * - 2011 + - Warning + - dem_average_area.DemAverageArea.tags is not a comma seperated list of integers + * - 2011 + - Warning + - measure_location.ControlMeasureLocation.tags refers to tag ids that are not present in Tags, + * - 2012 + - Warning + - dry_weather_flow.DryWeatherFlow.tags is not a comma seperated list of integers + * - 2012 + - Warning + - measure_map.ControlMeasureMap.tags refers to tag ids that are not present in Tags, + * - 2013 + - Warning + - dry_weather_flow_map.DryWeatherFlowMap.tags is not a comma seperated list of integers + * - 2013 + - Warning + - memory_control.ControlMemory.tags refers to tag ids that are not present in Tags, + * - 2014 + - Warning + - dry_weather_flow_distribution.DryWeatherFlowDistribution.tags is not a comma seperated list of integers + * - 2014 + - Warning + - table_control.ControlTable.tags refers to tag ids that are not present in Tags, + * - 2015 + - Warning + - cross_section_location.CrossSectionLocation.tags refers to tag ids that are not present in Tags, + * - 2015 + - Warning + - exchange_line.ExchangeLine.tags is not a comma seperated list of integers + * - 2016 + - Warning + - culvert.Culvert.tags refers to tag ids that are not present in Tags, + * - 2016 + - Warning + - grid_refinement_line.GridRefinementLine.tags is not a comma seperated list of integers + * - 2017 + - Warning + - dem_average_area.DemAverageArea.tags refers to tag ids that are not present in Tags, + * - 2017 + - Warning + - grid_refinement_area.GridRefinementArea.tags is not a comma seperated list of integers + * - 2018 + - Warning + - dry_weather_flow.DryWeatherFlow.tags refers to tag ids that are not present in Tags, + * - 2018 + - Warning + - lateral_1d.Lateral1d.tags is not a comma seperated list of integers + * - 2019 + - Warning + - dry_weather_flow_map.DryWeatherFlowMap.tags refers to tag ids that are not present in Tags, + * - 2019 + - Warning + - lateral_2d.Lateral2D.tags is not a comma seperated list of integers + * - 2020 + - Warning + - dry_weather_flow_distribution.DryWeatherFlowDistribution.tags refers to tag ids that are not present in Tags, + * - 2020 + - Warning + - obstacle.Obstacle.tags is not a comma seperated list of integers + * - 2021 + - Warning + - exchange_line.ExchangeLine.tags refers to tag ids that are not present in Tags, + * - 2021 + - Warning + - orifice.Orifice.tags is not a comma seperated list of integers + * - 2022 + - Warning + - grid_refinement_line.GridRefinementLine.tags refers to tag ids that are not present in Tags, + * - 2022 + - Warning + - pipe.Pipe.tags is not a comma seperated list of integers + * - 2023 + - Warning + - grid_refinement_area.GridRefinementArea.tags refers to tag ids that are not present in Tags, + * - 2023 + - Warning + - potential_breach.PotentialBreach.tags is not a comma seperated list of integers + * - 2024 + - Warning + - lateral_1d.Lateral1d.tags refers to tag ids that are not present in Tags, + * - 2024 + - Warning + - pump.Pump.tags is not a comma seperated list of integers + * - 2025 + - Warning + - lateral_2d.Lateral2D.tags refers to tag ids that are not present in Tags, + * - 2025 + - Warning + - pump_map.PumpMap.tags is not a comma seperated list of integers + * - 2026 + - Warning + - obstacle.Obstacle.tags refers to tag ids that are not present in Tags, + * - 2026 + - Warning + - surface.Surface.tags is not a comma seperated list of integers + * - 2027 + - Warning + - orifice.Orifice.tags refers to tag ids that are not present in Tags, + * - 2027 + - Warning + - surface_map.SurfaceMap.tags is not a comma seperated list of integers + * - 2028 + - Warning + - pipe.Pipe.tags refers to tag ids that are not present in Tags, + * - 2028 + - Warning + - surface_parameters.SurfaceParameter.tags is not a comma seperated list of integers + * - 2029 + - Warning + - potential_breach.PotentialBreach.tags refers to tag ids that are not present in Tags, + * - 2029 + - Warning + - weir.Weir.tags is not a comma seperated list of integers + * - 2030 + - Warning + - pump.Pump.tags refers to tag ids that are not present in Tags, + * - 2030 + - Warning + - windshielding_1d.Windshielding.tags is not a comma seperated list of integers + * - 2031 + - Warning + - pump_map.PumpMap.tags refers to tag ids that are not present in Tags, + * - 2032 + - Warning + - surface.Surface.tags refers to tag ids that are not present in Tags, + * - 2033 + - Warning + - surface_map.SurfaceMap.tags refers to tag ids that are not present in Tags, + * - 2034 + - Warning + - surface_parameters.SurfaceParameter.tags refers to tag ids that are not present in Tags, + * - 2035 + - Warning + - weir.Weir.tags refers to tag ids that are not present in Tags, + * - 2036 + - Warning + - windshielding_1d.Windshielding.tags refers to tag ids that are not present in Tags, \ No newline at end of file