Skip to content

Latest commit

 

History

History
19 lines (13 loc) · 786 Bytes

README.md

File metadata and controls

19 lines (13 loc) · 786 Bytes

Fish Feeder

Fun project to create an automated fish feeder with an ESP8266, rotary encoder, OLED display and a servo motor.

Setup

To get this working, you need to add a file called Secrets.h to the root of this folder. It should contain your Wifi SSID and password like this.

#define SSID YOUR_SSID
#define PASSWORD YOUR_PASSWORD

You will also need the following libraries:

Connect a SSD1306 128x32 OLED display to the I2C pins as well as a rotary encoder and servo to the correct pins from Definitions.h on your NodeMCU ESP8266. Then, simply flash the program using the Arduino editor.