Skip to content

v2_CN_HTTPCallback

winlin edited this page Nov 3, 2015 · 34 revisions

HTTPCallback

SRS不支持服务器脚本(参考:服务器端脚本),服务器端定制有一个重要的替代功能,就是HTTP回调。譬如当客户端连接到SRS时,回调指定的http地址,这样可以实现验证功能。

关于Token认证,即基于http回调的认证,参考:Token Authentication

Compile

HttpCallback的编译选项为--with-http-callback,关闭HttpCallback的选项为--without-http-callback

参考:Build

Config SRS

http hooks的配置如下:

vhost your_vhost {
    http_hooks {
        # whether the http hooks enalbe.
        # default off.
        enabled         on;
        # when client connect to vhost/app, call the hook,
        # the request in the POST data string is a object encode by json:
        #       {
        #           "action": "on_connect",
        #           "client_id": 1985,
        #           "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
        #           "tcUrl": "rtmp://video.test.com/live?key=d2fa801d08e3f90ed1e1670e6e52651a",
        #           "pageUrl": "http://www.test.com/live.html"
        #       }
        # if valid, the hook must return HTTP code 200(Stauts OK) and response
        # an int value specifies the error code(0 corresponding to success):
        #       0
        # support multiple api hooks, format:
        #       on_connect http://xxx/api0 http://xxx/api1 http://xxx/apiN
        on_connect      http://127.0.0.1:8085/api/v1/clients http://localhost:8085/api/v1/clients;
        # when client close/disconnect to vhost/app/stream, call the hook,
        # the request in the POST data string is a object encode by json:
        #       {
        #           "action": "on_close",
        #           "client_id": 1985,
        #           "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live"
        #       }
        # if valid, the hook must return HTTP code 200(Stauts OK) and response
        # an int value specifies the error code(0 corresponding to success):
        #       0
        # support multiple api hooks, format:
        #       on_close http://xxx/api0 http://xxx/api1 http://xxx/apiN
        on_close        http://127.0.0.1:8085/api/v1/clients http://localhost:8085/api/v1/clients;
        # when client(encoder) publish to vhost/app/stream, call the hook,
        # the request in the POST data string is a object encode by json:
        #       {
        #           "action": "on_publish",
        #           "client_id": 1985,
        #           "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
        #           "stream": "livestream"
        #       }
        # if valid, the hook must return HTTP code 200(Stauts OK) and response
        # an int value specifies the error code(0 corresponding to success):
        #       0
        # support multiple api hooks, format:
        #       on_publish http://xxx/api0 http://xxx/api1 http://xxx/apiN
        on_publish      http://127.0.0.1:8085/api/v1/streams http://localhost:8085/api/v1/streams;
        # when client(encoder) stop publish to vhost/app/stream, call the hook,
        # the request in the POST data string is a object encode by json:
        #       {
        #           "action": "on_unpublish",
        #           "client_id": 1985,
        #           "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
        #           "stream": "livestream"
        #       }
        # if valid, the hook must return HTTP code 200(Stauts OK) and response
        # an int value specifies the error code(0 corresponding to success):
        #       0
        # support multiple api hooks, format:
        #       on_unpublish http://xxx/api0 http://xxx/api1 http://xxx/apiN
        on_unpublish    http://127.0.0.1:8085/api/v1/streams http://localhost:8085/api/v1/streams;
        # when client start to play vhost/app/stream, call the hook,
        # the request in the POST data string is a object encode by json:
        #       {
        #           "action": "on_play",
        #           "client_id": 1985,
        #           "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
        #           "stream": "livestream",
        #           "pageUrl": "http://www.test.com/live.html"
        #       }
        # if valid, the hook must return HTTP code 200(Stauts OK) and response
        # an int value specifies the error code(0 corresponding to success):
        #       0
        # support multiple api hooks, format:
        #       on_play http://xxx/api0 http://xxx/api1 http://xxx/apiN
        on_play         http://127.0.0.1:8085/api/v1/sessions http://localhost:8085/api/v1/sessions;
        # when client stop to play vhost/app/stream, call the hook,
        # the request in the POST data string is a object encode by json:
        #       {
        #           "action": "on_stop",
        #           "client_id": 1985,
        #           "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
        #           "stream": "livestream"
        #       }
        # if valid, the hook must return HTTP code 200(Stauts OK) and response
        # an int value specifies the error code(0 corresponding to success):
        #       0
        # support multiple api hooks, format:
        #       on_stop http://xxx/api0 http://xxx/api1 http://xxx/apiN
        on_stop         http://127.0.0.1:8085/api/v1/sessions http://localhost:8085/api/v1/sessions;
        # when srs reap a dvr file, call the hook,
        # the request in the POST data string is a object encode by json:
        #       {
        #           "action": "on_dvr",
        #           "client_id": 1985,
        #           "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
        #           "stream": "livestream",
        #           "cwd": "/usr/local/srs",
        #           "file": "./objs/nginx/html/live/livestream.1420254068776.flv"
        #       }
        # if valid, the hook must return HTTP code 200(Stauts OK) and response
        # an int value specifies the error code(0 corresponding to success):
        #       0
        on_dvr          http://127.0.0.1:8085/api/v1/dvrs http://localhost:8085/api/v1/dvrs;
    }
}

备注:可以参考conf/full.conf配置文件中的hooks.callback.vhost.com实例。

HTTP callback events

SRS的回调事件包括:

事件 数据 说明
on_connect {
"action": "on_connect",
"client_id": 1985,
"ip": "192.168.1.10",
"vhost": "video.test.com",
"app": "live",
"tcUrl": "rtmp://x/x?key=xxx",
"pageUrl": "http://x/x.html"
}
当客户端连接到指定的vhost和app时
on_close {
"action": "on_close",
"client_id": 1985,
"ip": "192.168.1.10",
"vhost": "video.test.com",
"app": "live",
"send_bytes": 10240,
"recv_bytes": 10240
}
当客户端关闭连接,或者SRS主动关闭连接时
on_publish {
"action": "on_publish",
"client_id": 1985,
"ip": "192.168.1.10",
"vhost": "video.test.com",
"app": "live",
"stream": "livestream"
}
当客户端发布流时,譬如flash/FMLE方式推流到服务器
on_unpublish {
"action": "on_unpublish",
"client_id": 1985,
"ip": "192.168.1.10",
"vhost": "video.test.com",
"app": "live",
"stream": "livestream"
}
当客户端停止发布流时
on_play {
"action": "on_play",
"client_id": 1985,
"ip": "192.168.1.10",
"vhost": "video.test.com",
"app": "live",
"stream": "livestream",
"pageUrl": "http://www.test.com/live.html"
}
当客户端开始播放流时
on_stop {
"action": "on_stop",
"client_id": 1985,
"ip": "192.168.1.10",
"vhost": "video.test.com",
"app": "live",
"stream": "livestream"
}
当客户端停止播放时。备注:停止播放可能不会关闭连接,还能再继续播放。
on_dvr {
"action": "on_dvr",
"client_id": 1985,
"ip": "192.168.1.10",
"vhost": "video.test.com",
"app": "live",
"stream": "livestream",
"cwd": "/opt",
"file": "./l.xxx.flv"
}
当DVR录制关闭一个flv文件时

其中,

  • 事件:发生该事件时,即回调指定的HTTP地址。
  • HTTP地址:可以支持多个,以空格分隔,SRS会依次回调这些接口。
  • 数据:SRS将数据POST到HTTP接口。
  • 返回值:SRS要求HTTP服务器返回HTTP200并且response内容为整数错误码(0表示成功),其他错误码会断开客户端连接。

默认的HTTP服务器

SRS自带了一个默认的处理HTTP Callback的服务器,启动时需要指定端口,譬如8085端口。

启动方法:python research/api-server/server.py 8085

启动日志如下:

[winlin@dev6 srs]$ python research/api-server/server.py 8085
[2014-02-27 09:42:25][trace] api server listen at port: 8085, static_dir: /home/winlin/git/simple-rtmp-server/trunk/research/api-server/static-dir
[2014-02-27 09:42:25][trace] start cherrypy server
[27/Feb/2014:09:42:25] ENGINE Listening for SIGHUP.
[27/Feb/2014:09:42:25] ENGINE Listening for SIGTERM.
[27/Feb/2014:09:42:25] ENGINE Listening for SIGUSR1.
[27/Feb/2014:09:42:25] ENGINE Bus STARTING
[27/Feb/2014:09:42:25] ENGINE Started monitor thread '_TimeoutMonitor'.
[27/Feb/2014:09:42:25] ENGINE Started monitor thread 'Autoreloader'.
[27/Feb/2014:09:42:25] ENGINE Serving on 0.0.0.0:8085
[27/Feb/2014:09:42:25] ENGINE Bus STARTED

推流和播放

推流到SRS时,会调用HTTP接口:

[2014-02-27 09:41:33][trace] post to clients, req={"action":"on_connect","client_id":4,"ip":"192.168.1.179","vhost":"__defaultVhost__","app":"live","pageUrl":""}
[2014-02-27 09:41:33][trace] srs on_connect: client id=4, ip=192.168.1.179, vhost=__defaultVhost__, app=live, pageUrl=
127.0.0.1 - - [27/Feb/2014:09:41:33] "POST /api/v1/clients HTTP/1.1" 200 1 "" "srs(simple rtmp server)0.9.2"

播放SRS的流时,也会调用HTTP接口:

[2014-02-27 09:41:50][trace] post to clients, req={"action":"on_connect","client_id":5,"ip":"192.168.1.179","vhost":"__defaultVhost__","app":"live","pageUrl":"http://dev.chnvideo.com:3080/players/rtmp/"}
[2014-02-27 09:41:50][trace] srs on_connect: client id=5, ip=192.168.1.179, vhost=__defaultVhost__, app=live, pageUrl=http://dev.chnvideo.com:3080/players/rtmp/
127.0.0.1 - - [27/Feb/2014:09:41:50] "POST /api/v1/clients HTTP/1.1" 200 1 "" "srs(simple rtmp server)0.9.2"

Winlin 2015.1

Welcome to SRS wiki!

SRS 5.0 wiki

Please select your language:

SRS 4.0 wiki

Please select your language:

SRS 3.0 wiki

Please select your language:

SRS 2.0 wiki

Please select your language:

SRS 1.0 wiki

Please select your language:

Clone this wiki locally