PolarFire SoC FPGA Icicle Kit Boot Mode = 2 (User Secure Boot)

[utku1998]

Hello,

I am currently working with the "PolarFire SoC FPGA Icicle Kit". I have configured/flashed the device with the "Reference Design". Then, I have created an example test code (Simple LED Blinking example) in order test it for different boot modes (Boot Mode = 0, Boot Mode = 1, Boot Mode = 2, Boot Mode = 3). I have managed to boot the device with the Boot Modes = 0/1/3 and run the blinking code using the SoftConsole IDE. However I could not manage to boot the device in Boot Mode = 2 (User Secure Boot). While I am trying to flash my blinking code using SoftConsole IDEs Boot Mode = 2 option, I am getting some errors.

Unfortunately, there is not enough decomentation about how to boot device with the Boot Mode = 2, but only small eplanations. Can you please help me and my provide me a guidance/documentation which shows how I can boot the the device in Boot Mode = 2 (Secure Boot)?

Best regards,

Utku

[TommyMurphyTM1234]

• Boot Mode 2 (User Secure Boot) on PolarFire SoC FPGA (Icicle Kit) #266
• Boot Mode 2 (User Secure Boot) #270
• Failure while programming bare metal example in User Secure Boot Mode 2 polarfire-soc-bare-metal-examples#7