toolbox.py

import markdown
import mdtex2html
import threading
import importlib
import traceback
import importlib
import inspect
import re
from show_math import convert as convert_math
from functools import wraps, lru_cache


def ArgsGeneralWrapper(f):
    """
        装饰器函数，用于重组输入参数，改变输入参数的顺序与结构。
    """
    def decorated(txt, txt2, *args, **kwargs):
        txt_passon = txt
        if txt == "" and txt2 != "":
            txt_passon = txt2
        yield from f(txt_passon, *args, **kwargs)
    return decorated


def get_reduce_token_percent(text):
    try:
        # text = "maximum context length is 4097 tokens. However, your messages resulted in 4870 tokens"
        pattern = r"(\d+)\s+tokens\b"
        match = re.findall(pattern, text)
        EXCEED_ALLO = 500  # 稍微留一点余地，否则在回复时会因余量太少出问题
        max_limit = float(match[0]) - EXCEED_ALLO
        current_tokens = float(match[1])
        ratio = max_limit/current_tokens
        assert ratio > 0 and ratio < 1
        return ratio, str(int(current_tokens-max_limit))
    except:
        return 0.5, '不详'


def predict_no_ui_but_counting_down(i_say, i_say_show_user, chatbot, top_p, temperature, history=[], sys_prompt='', long_connection=True):
    """
        调用简单的predict_no_ui接口，但是依然保留了些许界面心跳功能，当对话太长时，会自动采用二分法截断
        i_say: 当前输入
        i_say_show_user: 显示到对话界面上的当前输入，例如，输入整个文件时，你绝对不想把文件的内容都糊到对话界面上
        chatbot: 对话界面句柄
        top_p, temperature: gpt参数
        history: gpt参数 对话历史
        sys_prompt: gpt参数 sys_prompt
        long_connection: 是否采用更稳定的连接方式（推荐）
    """
    import time
    from request_llm.bridge_chatgpt import predict_no_ui, predict_no_ui_long_connection
    from toolbox import get_conf
    TIMEOUT_SECONDS, MAX_RETRY = get_conf('TIMEOUT_SECONDS', 'MAX_RETRY')
    # 多线程的时候，需要一个mutable结构在不同线程之间传递信息
    # list就是最简单的mutable结构，我们第一个位置放gpt输出，第二个位置传递报错信息
    mutable = [None, '']
    # multi-threading worker

    def mt(i_say, history):
        while True:
            try:
                if long_connection:
                    mutable[0] = predict_no_ui_long_connection(
                        inputs=i_say, top_p=top_p, temperature=temperature, history=history, sys_prompt=sys_prompt)
                else:
                    mutable[0] = predict_no_ui(
                        inputs=i_say, top_p=top_p, temperature=temperature, history=history, sys_prompt=sys_prompt)
                break
            except ConnectionAbortedError as token_exceeded_error:
                # 尝试计算比例，尽可能多地保留文本
                p_ratio, n_exceed = get_reduce_token_percent(
                    str(token_exceeded_error))
                if len(history) > 0:
                    history = [his[int(len(his) * p_ratio):]
                               for his in history if his is not None]
                else:
                    i_say = i_say[:     int(len(i_say) * p_ratio)]
                mutable[1] = f'警告，文本过长将进行截断，Token溢出数：{n_exceed}，截断比例：{(1-p_ratio):.0%}。'
            except TimeoutError as e:
                mutable[0] = '[Local Message] 请求超时。'
                raise TimeoutError
            except Exception as e:
                mutable[0] = f'[Local Message] 异常：{str(e)}.'
                raise RuntimeError(f'[Local Message] 异常：{str(e)}.')
    # 创建新线程发出http请求
    thread_name = threading.Thread(target=mt, args=(i_say, history))
    thread_name.start()
    # 原来的线程则负责持续更新UI，实现一个超时倒计时，并等待新线程的任务完成
    cnt = 0
    while thread_name.is_alive():
        cnt += 1
        chatbot[-1] = (i_say_show_user,
                       f"[Local Message] {mutable[1]}waiting gpt response {cnt}/{TIMEOUT_SECONDS*2*(MAX_RETRY+1)}"+''.join(['.']*(cnt % 4)))
        yield chatbot, history, '正常'
        time.sleep(1)
    # 把gpt的输出从mutable中取出来
    gpt_say = mutable[0]
    if gpt_say == '[Local Message] Failed with timeout.':
        raise TimeoutError
    return gpt_say


def write_results_to_file(history, file_name=None):
    """
        将对话记录history以Markdown格式写入文件中。如果没有指定文件名，则使用当前时间生成文件名。
    """
    import os
    import time
    if file_name is None:
        # file_name = time.strftime("chatGPT分析报告%Y-%m-%d-%H-%M-%S", time.localtime()) + '.md'
        file_name = 'chatGPT分析报告' + \
            time.strftime("%Y-%m-%d-%H-%M-%S", time.localtime()) + '.md'
    os.makedirs('./gpt_log/', exist_ok=True)
    with open(f'./gpt_log/{file_name}', 'w', encoding='utf8') as f:
        f.write('# chatGPT 分析报告\n')
        for i, content in enumerate(history):
            try:    # 这个bug没找到触发条件，暂时先这样顶一下
                if type(content) != str:
                    content = str(content)
            except:
                continue
            if i % 2 == 0:
                f.write('## ')
            f.write(content)
            f.write('\n\n')
    res = '以上材料已经被写入' + os.path.abspath(f'./gpt_log/{file_name}')
    print(res)
    return res


def regular_txt_to_markdown(text):
    """
        将普通文本转换为Markdown格式的文本。
    """
    text = text.replace('\n', '\n\n')
    text = text.replace('\n\n\n', '\n\n')
    text = text.replace('\n\n\n', '\n\n')
    return text


def CatchException(f):
    """
        装饰器函数，捕捉函数f中的异常并封装到一个生成器中返回，并显示到聊天当中。
    """
    @wraps(f)
    def decorated(txt, top_p, temperature, chatbot, history, systemPromptTxt, WEB_PORT):
        try:
            yield from f(txt, top_p, temperature, chatbot, history, systemPromptTxt, WEB_PORT)
        except Exception as e:
            from check_proxy import check_proxy
            from toolbox import get_conf
            proxies, = get_conf('proxies')
            tb_str = '```\n' + traceback.format_exc() + '```'
            if chatbot is None or len(chatbot) == 0:
                chatbot = [["插件调度异常", "异常原因"]]
            chatbot[-1] = (chatbot[-1][0],
                           f"[Local Message] 实验性函数调用出错: \n\n{tb_str} \n\n当前代理可用性: \n\n{check_proxy(proxies)}")
            yield chatbot, history, f'异常 {e}'
    return decorated


def HotReload(f):
    """
        装饰器函数，实现函数插件热更新
    """
    @wraps(f)
    def decorated(*args, **kwargs):
        fn_name = f.__name__
        f_hot_reload = getattr(importlib.reload(inspect.getmodule(f)), fn_name)
        yield from f_hot_reload(*args, **kwargs)
    return decorated


def report_execption(chatbot, history, a, b):
    """
        向chatbot中添加错误信息
    """
    chatbot.append((a, b))
    history.append(a)
    history.append(b)


def text_divide_paragraph(text):
    """
        将文本按照段落分隔符分割开，生成带有段落标签的HTML代码。
    """
    if '```' in text:
        # careful input
        return text
    else:
        # wtf input
        lines = text.split("\n")
        for i, line in enumerate(lines):
            lines[i] = lines[i].replace(" ", "&nbsp;")
        text = "</br>".join(lines)
        return text


def markdown_convertion(txt):
    """
        将Markdown格式的文本转换为HTML格式。如果包含数学公式，则先将公式转换为HTML格式。
    """
    pre = '<div class="markdown-body">'
    suf = '</div>'
    if ('$' in txt) and ('```' not in txt):
        return pre + markdown.markdown(txt, extensions=['fenced_code', 'tables']) + '<br><br>' + markdown.markdown(convert_math(txt, splitParagraphs=False), extensions=['fenced_code', 'tables']) + suf
    else:
        return pre + markdown.markdown(txt, extensions=['fenced_code', 'tables']) + suf


def close_up_code_segment_during_stream(gpt_reply):
    """
        在gpt输出代码的中途（输出了前面的```，但还没输出完后面的```），补上后面的```
    """
    if '```' not in gpt_reply:
        return gpt_reply
    if gpt_reply.endswith('```'):
        return gpt_reply

    # 排除了以上两个情况，我们
    segments = gpt_reply.split('```')
    n_mark = len(segments) - 1
    if n_mark % 2 == 1:
        # print('输出代码片段中！')
        return gpt_reply+'\n```'
    else:
        return gpt_reply


def format_io(self, y):
    """
        将输入和输出解析为HTML格式。将y中最后一项的输入部分段落化，并将输出部分的Markdown和数学公式转换为HTML格式。
    """
    if y is None or y == []:
        return []
    i_ask, gpt_reply = y[-1]
    i_ask = text_divide_paragraph(i_ask)  # 输入部分太自由，预处理一波
    gpt_reply = close_up_code_segment_during_stream(
        gpt_reply)  # 当代码输出半截的时候，试着补上后个```
    y[-1] = (
        None if i_ask is None else markdown.markdown(
            i_ask, extensions=['fenced_code', 'tables']),
        None if gpt_reply is None else markdown_convertion(gpt_reply)
    )
    return y


def find_free_port():
    """
        返回当前系统中可用的未使用端口。
    """
    import socket
    from contextlib import closing
    with closing(socket.socket(socket.AF_INET, socket.SOCK_STREAM)) as s:
        s.bind(('', 0))
        s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
        return s.getsockname()[1]


def extract_archive(file_path, dest_dir):
    import zipfile
    import tarfile
    import os
    # Get the file extension of the input file
    file_extension = os.path.splitext(file_path)[1]

    # Extract the archive based on its extension
    if file_extension == '.zip':
        with zipfile.ZipFile(file_path, 'r') as zipobj:
            zipobj.extractall(path=dest_dir)
            print("Successfully extracted zip archive to {}".format(dest_dir))

    elif file_extension in ['.tar', '.gz', '.bz2']:
        with tarfile.open(file_path, 'r:*') as tarobj:
            tarobj.extractall(path=dest_dir)
            print("Successfully extracted tar archive to {}".format(dest_dir))

    # 第三方库，需要预先pip install rarfile
    # 此外，Windows上还需要安装winrar软件，配置其Path环境变量，如"C:\Program Files\WinRAR"才可以
    elif file_extension == '.rar':
        try:
            import rarfile
            with rarfile.RarFile(file_path) as rf:
                rf.extractall(path=dest_dir)
                print("Successfully extracted rar archive to {}".format(dest_dir))
        except:
            print("Rar format requires additional dependencies to install")
            return '\n\n需要安装pip install rarfile来解压rar文件'

    # 第三方库，需要预先pip install py7zr
    elif file_extension == '.7z':
        try:
            import py7zr
            with py7zr.SevenZipFile(file_path, mode='r') as f:
                f.extractall(path=dest_dir)
                print("Successfully extracted 7z archive to {}".format(dest_dir))
        except:
            print("7z format requires additional dependencies to install")
            return '\n\n需要安装pip install py7zr来解压7z文件'
    else:
        return ''
    return ''


def find_recent_files(directory):
    """
        me: find files that is created with in one minutes under a directory with python, write a function
        gpt: here it is!
    """
    import os
    import time
    current_time = time.time()
    one_minute_ago = current_time - 60
    recent_files = []

    for filename in os.listdir(directory):
        file_path = os.path.join(directory, filename)
        if file_path.endswith('.log'):
            continue
        created_time = os.path.getmtime(file_path)
        if created_time >= one_minute_ago:
            if os.path.isdir(file_path):
                continue
            recent_files.append(file_path)

    return recent_files


def on_file_uploaded(files, chatbot, txt):
    if len(files) == 0:
        return chatbot, txt
    import shutil
    import os
    import time
    import glob
    from toolbox import extract_archive
    try:
        shutil.rmtree('./private_upload/')
    except:
        pass
    time_tag = time.strftime("%Y-%m-%d-%H-%M-%S", time.localtime())
    os.makedirs(f'private_upload/{time_tag}', exist_ok=True)
    err_msg = ''
    for file in files:
        file_origin_name = os.path.basename(file.orig_name)
        shutil.copy(file.name, f'private_upload/{time_tag}/{file_origin_name}')
        err_msg += extract_archive(f'private_upload/{time_tag}/{file_origin_name}',
                                   dest_dir=f'private_upload/{time_tag}/{file_origin_name}.extract')
    moved_files = [fp for fp in glob.glob(
        'private_upload/**/*', recursive=True)]
    txt = f'private_upload/{time_tag}'
    moved_files_str = '\t\n\n'.join(moved_files)
    chatbot.append(['我上传了文件，请查收',
                    f'[Local Message] 收到以下文件: \n\n{moved_files_str}' +
                    f'\n\n调用路径参数已自动修正到: \n\n{txt}' +
                    f'\n\n现在您点击任意实验功能时，以上文件将被作为输入参数'+err_msg])
    return chatbot, txt


def on_report_generated(files, chatbot):
    from toolbox import find_recent_files
    report_files = find_recent_files('gpt_log')
    if len(report_files) == 0:
        return None, chatbot
    # files.extend(report_files)
    chatbot.append(['汇总报告如何远程获取？', '汇总报告已经添加到右侧“文件上传区”（可能处于折叠状态），请查收。'])
    return report_files, chatbot


@lru_cache(maxsize=128)
def read_single_conf_with_lru_cache(arg):
    try:
        r = getattr(importlib.import_module('config_private'), arg)
    except:
        r = getattr(importlib.import_module('config'), arg)
    # 在读取API_KEY时，检查一下是不是忘了改config
    if arg == 'API_KEY':
        # 正确的 API_KEY 是 "sk-" + 48 位大小写字母数字的组合
        API_MATCH = re.match(r"sk-[a-zA-Z0-9]{48}$", r)
        if API_MATCH:
            print(f"[API_KEY] 您的 API_KEY 是: {r[:15]}*** API_KEY 导入成功")
        else:
            assert False, "正确的 API_KEY 是 'sk-' + '48 位大小写字母数字' 的组合，请在config文件中修改API密钥, 添加海外代理之后再运行。" + \
                "（如果您刚更新过代码，请确保旧版config_private文件中没有遗留任何新增键值）"
    if arg == 'proxies':
        if r is None:
            print('[PROXY] 网络代理状态：未配置。无代理状态下很可能无法访问。建议：检查USE_PROXY选项是否修改。')
        else:
            print('[PROXY] 网络代理状态：已配置。配置信息如下：', r)
            assert isinstance(r, dict), 'proxies格式错误，请注意proxies选项的格式，不要遗漏括号。'
    return r


def get_conf(*args):
    # 建议您复制一个config_private.py放自己的秘密, 如API和代理网址, 避免不小心传github被别人看到
    res = []
    for arg in args:
        r = read_single_conf_with_lru_cache(arg)
        res.append(r)
    return res


def clear_line_break(txt):
    txt = txt.replace('\n', ' ')
    txt = txt.replace('  ', ' ')
    txt = txt.replace('  ', ' ')
    return txt


class DummyWith():
    def __enter__(self):
        return self

    def __exit__(self, exc_type, exc_value, traceback):
        return