Enabling Experimental PlayStation 5 Features (PS5 Users Only)
@@ -1614,22 +1614,32 @@
Choosing your Re
-
Audio/WiFi Settings for Steam Deck
+
Audio/WiFi Settings
-
Below are the Video Settings you'll want to try first with your PlayStation console (choose the PS5/1080p HDR tab if you have a PS5 connected to a HDR TV/monitor (see HDR section below for more details), PS5/1080p if you have a PS5 not connected to an HDR TV/monitor, and PS4/720p if you have a PS4). If you are having issues with your PS5 connection, please try the PS4/720p settings with your PS5 since they require significantly less bandwidth from your wireless router.
+
Video Settings
+
+
+
+
Stream Settings
+
(choose the PS5 HDR tab if you have a PS5 connected to a HDR TV/monitor (see HDR section below for more details), PS5 if you have a PS5 not connected to an HDR TV/monitor, and PS4 if you have a PS4). If you are having issues with your PS5 connection, please try switching to 720P following with its default bitrate of 10,000 with your PS5 since that requires significantly less bandwidth from your wireless router.
-
+
-
Stream output can be up to 1080p with HDR. Here are the settings that are currently working well for me. This results in a native-like experience for most games on my network/setup.
-
+
Stream output with HDR. This are the recommended PS5 settings for a device that supports HDR such as the Steam Deck OLED.
+
+
+Why 1080p if the Steam Deck is only 800p?
+
Using 1080p results in a better picture for me than 720p. The biggest factor in this seems to be chroma-sub sampling. In simple terms, the colors for an image are compressed and so you get a much lower resolution of color data than your image resolution. This means a 1080p image (with a high bitrate) will have more color data than a 720p image even if the image resolution itself ends up being 720p (since the color resolution will be higher than the equivalent 720p picture's color resolution). This results in an image that has more pop to it. Thus, I recommend streaming at 1080p if you have the bandwidth (good enough wireless router).
+
However, if you are having issues with your wireless connection (i.e choppy audio, flashes in your video, or lag) while playing, then please use 720p instead. The gains you get from 1080p are nice, but aren't worth having a bad connection.
+
-
Stream output can be up to 1080p. Here are the settings that are currently working well for me. This results in a native-like experience for most games on my network/setup.
-
+
These are the recommended PS5 settings for a device that doesn't support HDR like the ROG Ally.
+
Why 1080p if the Steam Deck is only 800p?
Using 1080p results in a better picture for me than 720p. The biggest factor in this seems to be chroma-sub sampling. In simple terms, the colors for an image are compressed and so you get a much lower resolution of color data than your image resolution. This means a 1080p image (with a high bitrate) will have more color data than a 720p image even if the image resolution itself ends up being 720p (since the color resolution will be higher than the equivalent 720p picture's color resolution). This results in an image that has more pop to it. Thus, I recommend streaming at 1080p if you have the bandwidth (good enough wireless router).
@@ -1637,8 +1647,8 @@
Choosing your Re
-
For PS4, the stream is limited to 720p. Using the defaults for most values works well here, resulting in native-like (albeit w/ a diminished resolution) experience for most games on my network/setup.
-
+
This is the recommended setting for a PS4. If you have a PS4 pro you can use 1080P instead.
Provides unique remote and local Stream Settings for each console (PS4/PS5)
+
+
Separate Local and Remote and PS4/PS5 settings so you can set appropriate settings for each type of connection
+
Enable more network types to work with remote connection via PSN (Note: some can only be made to work a % of the time due to limitations with remote play imposed by Sony)
+
Export/import option for settings to transfer across devices/platforms
+
Adds auto hw decoder option which is now the default. It chooses the best decoder for your platform from the available decoders
+
Make Chiaki4deck ipv6 compatible (ipv6 not yet supported by remote play on the console [i.e., in Sony's PlayStation firmware] so can't be used yet)
Improves remote connection via PSN + adds PS4 support
+
Improves + adds PS4 support to remote connection via PSN
remote connection via PSN now supports PS4 consoles
remote connection via PSN now supports more network types
diff --git a/search/search_index.json b/search/search_index.json
index 3d8416ee..b0f06f85 100644
--- a/search/search_index.json
+++ b/search/search_index.json
@@ -1 +1 @@
-{"config":{"lang":["en"],"separator":"[\\s\\-]+","pipeline":["stopWordFilter"]},"docs":[{"location":"","title":"PlayStation Remote Play on Steam Deck","text":"
Site Purpose
This site serves as a guide to enable you to have the best experience with PlayStation Remote Play on the Steam Deck. Currently, it employs an updated Chiaki package with Steam Deck enhancements I have dubbed chiaki4deck. I have created the accompanying chiaki4deck flatpak as a means to provide updates to Chiaki for Steam Deck users. I am contributing the updates upstream to the main Chiaki project with the hope that they are added despite it currently being in maintenance mode.
Start by visiting the Setup section and following each of the subsections to learn how to setup Chiaki for the best experience on your Steam Deck using chiaki4deck.
Chiaki is a \"Free and Open Source PlayStation Remote Play Client\" licensed under the GNU Affero General Public License version 3 (AGPL V3). This license enables anyone to share and modify the source code to add additional features on the condition that they make those publicly available (copy-left) and also license them under the same AGPL V3 license. This package currently has an official flatpak on flathub which you can install on the Steam Deck.
chiaki4deck aims to provide tips and tricks on using Chiaki with the Steam Deck. In the spirit of Chiaki being open source, I have made changes to the Chiaki project to optimize the experience on my Steam Deck and am sharing how to access and use those enhancements on this site. Furthermore, I have submitted a patch to bring the first set of completed updates to the \"official\" Chiaki repo. Additionally, I plan to submit future updates as patches and hope they will be added despite the Chiaki project being in maintenance mode. If they are added, all of the chiaki4deck documentation here will also apply to the official Chiaki flatpak.
What is the chiaki4deck flatpak?
I have provided a flatpak with my updates named chiaki4deck (to distinguish it from the official Chiaki release to avoid confusion if users have both installed) as a solution for users that want an easy way to use these improvements on their Steam Deck. For installation instructions, see the Installation section
For users that want to build from source, I have also provided the updated source code on the accompanying GitHub repo (the link to the GitHub is on the top right [top left menu on mobile] of the site banner you see if you scroll to the top of any page). Instructions for this are in the DIY section. As it stands, a lot of the documentation applies to the general Chiaki flatpak in addition to the chiaki4deck flatpak, but instructions are specifically tailored to chiaki4deck and the updates included therein. To use this documentation with the Chiaki flatpak replace io.github.streetpea.Chiaki4deck with re.chiaki.Chiaki where applicable and note that the features listed in the Updates section will not work with that version (they only work with chiaki4deck until the main Chiaki flatpak gets an update.)
If you want to update the documentation to add helpful information of your own, you can scroll to the top of the page you want to edit and click the paper with pencil icon on the top right (to the right of the current page's title). This will enable you to make edits and submit them for approval. If you have more detailed edits or a new contribution, you can build the documentation locally and see the changes rendered as you make and save them by following the Building the Documentation Yourself section.
"},{"location":"#making-suggestions-for-improvements-to-the-documentation","title":"Making Suggestions for Improvements to the Documentation","text":"
Please submit general issues to the chiaki4deck GitHub as well as specific issues related to a given page by clicking the underneath \"Was this page helpful?\" and opening the feedback form for the page you think needs updating.
"},{"location":"diy/builddocs/","title":"Building the Documentation Yourself","text":"
For Documentation Contributors Only
This is for people who want to update the documentation of chiaki4deck and see the updates locally or if you are a regular user and are curious on how to do it. In most cases, just accessing the documentation via the site https://streetpea.github.io/chiaki4deck/ is best. If you want to access the documentation without internet access, instead of following this documentation, you should navigate to the print page (which displays the documentation in printable format). Then, Print->Save to pdf in your web browser and access the PDF freely offline.
Change into the source code directory in your terminal
Serve the documentation in a terminal while in your source code directory with:
mkdocs serve\n
Open a web browser and access the documentation
The above mkdocs serve command should output an address to access the documentation which by default is: http://127.0.0.1:8000 which is over localhost (only accessible locally). Go to this address to access the documentation.
Documentation updates automatically
If you leave the terminal tab where you ran mkdocs serve open, the docs will update automatically when your save your changes to the file. This way as you make changes you can check your changes at the given web site, displaying in the same way as it will when displayed as a static website on GitHub.
Make edits to the relevant markdown files in the docs/ subfolder, and watch the changes display in realtime in your web browser when you save your file updates.
Special Documentation Features
To use the special features of mkdocs-material and the plugins used in these docs that enhance the documentation from traditional markdown, please take a look at the syntax for the various features. You can find examples of them in action in the markdown of this site by either:
Inspecting a given page of the site in your web browser
scroll to the top of a page with a feature you want to see how to use
click the page with an eye icon to the right of the title
Inspect the markdown for the part of the page with the given feature
OR
See the markdown for the entire site in the docs/ subfolder of the GitHub project, navigating the markdown files for each page
Additionally, you can find more examples and explainers on the mkdocs-material reference page.
"},{"location":"diy/buildit/","title":"Building the Flatpak Yourself","text":"
For Advanced Users Only
This is for advanced users who are comfortable going through the build process themselves, such as those who want to build on top of the changes I have made. For regular users, please install using the Installation Section.
Steam OS is a read-only filesystem so you will need to temporarily disable this to install flatpak-builder. Additionally, keep in mind that your installed packages may get wiped during a system update and need to be reinstalled following this process again in the future.
"},{"location":"diy/buildit/#building-the-flatpak","title":"Building the Flatpak","text":""},{"location":"diy/buildit/#get-flatpak-dependencies","title":"Get Flatpak Dependencies","text":"
Install the necessary flatpak runtime, associated sdk, and base app.
"},{"location":"diy/buildit/#create-gpg-key-for-signing-your-builds-and-repositories","title":"Create gpg Key for Signing your Builds and Repositories","text":"
Create the gpg key pair
gpg --quick-gen-key chiaki4deck-diy\n
Export public key (private key stays on your machine in your gpg directory) [~/.gnupg by default].
This build process is compiling first the dependencies and then Chiaki itself with the updates included in chiaki4deck. This will take a long while (read: 15+ minutes depending on the resources of the build system itself) the first time it runs. However, since flatpak caches builds, if you make changes to just the chiaki4deck repo code and then run a new build, it will import the dependencies from cache and only start building from scratch when it detects the first change in the stack. This results in subsequent builds going much faster than the first build you make.
Update static deltas (makes upgrading require less downloaded data for end-users)
"},{"location":"diy/steamdeckdev/","title":"Developing chiaki4deck updates on Steam Deck","text":"
This is for contributors that want to make/test updates to the codebase without building a new flatpak each time.
Adding Dependencies
If you want to add new dependencies that aren't already included in the flatpak modules or SDK, then you will need to create a new flatpak build adding that module or install the module locally and it to your PATH. However, this would only be needed in rare circumstances.
Clone that branch or pull it into the git repo cloned above
"},{"location":"diy/steamdeckdev/#creating-and-debugging-builds-without-new-flatpak-build","title":"Creating and Debugging Builds without New Flatpak Build","text":"
Enter the development version of the flatpak with the chiaki4deck source code mounted with:
flatpak run --command=bash --devel io.github.streetpea.Chiaki4deck-devel\n
Create a build using cmake as per usual
Debug buildRelease build
Change into the git directory for your cloned project
Make a directory for your debug build
mkdir Debug\n
Change into debug directory
cd Debug\n
Create build files with cmake
cmake -DCMAKE_BUILD_TYPE=Debug ..\n
Build chiaki4deck
make\n
Change into the git directory you mounted
Make a directory for your debug build
mkdir Release\n
Change into debug directory
cd Release\n
Create build files with cmake
cmake -DCMAKE_BUILD_TYPE=Release ..\n
Build chiaki4deck
make\n
Run build as usual from executables (using gdb for debugging Debug build)
DebugRelease
From Debug directory using gdb:
gdb ./gui/chiaki\n
From Release directory:
./gui/chiaki\n
Set vaapi to none
When running chiaki from within the flatpak like this please set vaapi to none as otherwise the video won't work. This is fine since you are just running Chiaki like this for development tests only so worse performance isn't a big concern.
Make edits to the source code to implement your changes
Editing code on Steam Deck
Personally, I use vscode which you can install as a flatpak from Discover. You can open your chiaki code directory using vscode from your Steam Deck desktop and save changes. Then, these changes which will be reflected in your flatpak (since you mounted the chiaki code directory to your flatpak in the steps above) when you do a new build in your flatpak environment. The process would be similar with other code editors installed on your Steam Deck.
After making changes to the source code, simply rebuild with make as per usual
"},{"location":"diy/steamdeckdev/#debug-coredump-from-a-flatpak","title":"Debug Coredump From a flatpak","text":"
Get process from coredump
Run coredumpctl
coredumpctl\n
Get pid for your application from list
Open gdb session for your flatpak with the given pid
flatpak-coredumpctl -m given_pid flatpak_name\n
Example given pid 4822 and flatpak name io.github.streetpea.Chiaki4deck-devel
For a comprehensive guide on gdb commands see Debugging with GDB
"},{"location":"setup/","title":"Set Up Remote Play on Steam Deck","text":"
This section covers how to set up PlayStation Remote Play (using Chiaki) on Steam Deck. It covers installing the chiaki4deck package, configuring an automatic (scripted) launch, and adding chiaki4deck to Game Mode with icons and a custom controller configuration to boot. Please switch into Desktop Mode for this process.
Open This Documentation on Your Steam Deck for Easy Copy/Pasting
If you open this documentation in a web browser on your Steam Deck (such as using the Firefox flatpak), you can easily copy and paste commands by clicking the copy icon to the right of each command (appears when hovering over the right end of a code box):
and pasting with Ctrl+V or right-click->paste in regular windows and Ctrl+Shift+V or right-click->paste in konsole windows.
Switching into Desktop Mode
Hit the Steam button on your Steam Deck
Navigate to the Power section on the menu
Choose Switch to Desktop
Navigating Desktop Mode
This install requires entering into Desktop Mode. Please connect the following to your Steam Deck:
Highly RecommendedOptional but Recommended if you Have Available
external keyboard (You can use Steam + X to bring up and use the virtual keyboard and make liberal use of copy/paste if you really need to, but it is a much worse experience)
external mouse (can use the touchpad/trackpads on the device instead)
external monitor (can use the native Steam Deck screen instead)
Use the Auto Connect Feature Instead if it Meets Your Needs
Now that you have chiaki4deck configured, it's time to make it wake up your PlayStation and connect to it automatically. Note: If you only have 1 console please try the autoconnect feature. Otherwise, proceed with this guide to setup a script to automatically launch your different systems.
Sleep Mode Required
For this to work, your PlayStation needs to either be in rest/sleep mode or on (so that it is listening for the wake up signal). This means you will want to keep your PlayStation in rest/sleep mode when you are not playing (instead of off).
Open a konsole session (launch it via Applications by clicking the Steam icon in the bottom left and searching for it in the All Applications section)
Get your PlayStation IP
Get your registered PlayStation's IP Address
Launch Chiaki via your desktop or via:
flatpak run io.github.streetpea.Chiaki4deck\n
Get your IP address via the console widget and then close the window and return to the konsole session
Prevent IP From Changing
In order to prevent your IP from changing (which would make the script stop working) if you ever disconnect your PlayStation console from your network and reconnect it (especially if other devices are added to the network in the meantime), you should go into your router settings and reserve an IP address for your PlayStation (DHCP IP reservation / \"static\" IP) or create a hostname for it. For a TP-Link, Netgear, Asus or Linskys router, follow these instructions. If you have a different router, you can search (using a search engine such as DuckDuckGo or Google) for instructions for that specific router using the formula \"dhcp reservation myroutername router\" such as \"dhcp reservation netgear router\" and follow the instructions to reserve an IP for your PlayStation console so that it won't change. Alternatively, if your router has an option to set hostnames for your devices, you can set a hostname for your PlayStation console and use your hostname in the automation instead of a static IP address.
Create script for waking PlayStation and launching Chiaki
Automated Instructions (Recommended)Manual Instructions (For People who like to do things by hand)
Run the gen-launcher script using the following command in your konsole and answer the prompts (you will need your IP address from step 2 above)
What Do the Different Modes (i.e., fullscreen [uses Normal], zoom, stretch) Look Like?
To see examples of the different launch modes, visit the Updates section
Connecting Outside of Your Local Network
You can add an external IP or hostname in addition to your local one to connect from an external network. To do so, you need to set up port forwarding as detailed in the prior remote connection section. Then, you can choose to setup an external IP/hostname as part of the setup script process. The automation will take your home network name (SSID) to check if you are home or not to use the correct IP/hostname automatically. The script will automatically detect your current SSID. Thus, if you are on your home network while running the setup script (gen-launcher.sh), it will detect your home ssid so you will just need to hit Enter. If not, you can enter ot manually (instead of using the default of your Steam Deck's current network's SSID). You can get your home SSID for manual entry via iwgetid -r from the konsole when connected to your home network or by looking in your network history on your Steam Deck (it will be the connection name for your home network such as StreetPea-5G). Of course, if you want to skip this now and setup the external address later, you can always rerun the automation or choose a placeholder external IP now and manually edit it to your desired IP/hostname later.
Example Output [click to expand me]
bash <(curl -sLo- https://raw.githubusercontent.com/streetpea/chiaki4deck/main/scripts/gen-launcher.sh)\n\n1) PlayStation 4\n2) PlayStation 5\nPlease select the number corresponding to your Playstation Console: 2\nOption 2: PlayStation 5 was chosen\n\n\n\n\nHOME ADDRESS\n-------------\n1) IP\n2) hostname\nNOTICE: Use 1 unless you created a hostname (FQDN) for your PlayStation\nPlease select the number corresponding to your address type: 1\nOption 1: IP was chosen\n\nEnter your PlayStation IP (should be xxx.xxx.xxx.xxx like 192.168.1.16):\n192.168.1.16\n\nDo you have a separate address (DNS or IP) to access this console away from home? (y/n):\ny\nEnter your home SSID [hit enter for default: StreetPea-5G]: \n\n\n\nAWAY ADDRESS\n-------------\n1) IP\n2) hostname\nNOTICE: Use 1 unless you created a hostname (FQDN) for your PlayStation\nPlease select the number corresponding to your address type: 2\nOption 2: hostname was chosen\n\nEnter your PlayStation FQDN (hostname) (should be abc.ident like foo.bar.com):\nfoo.bar.com\n\n1) fullscreen\n2) zoom\n3) stretch\nPlease select the number corresponding to the default mode you want to use: 3\nOption 3: stretch was chosen\n\nDo you have a PlayStation Login Passcode? (y/n):\ny\nEnter your 4 digit PlayStation Login Passcode:\n1111\n\nWould you like to test the newly created script? (y/n):\ny\nsounds good, launching script now...\n[I] Logging to file /home/deck/.var/app/io.github.streetpea.Chiaki4deck/data/Chiaki/Chiaki/log/chiaki_session_2023-01-06_08-33-49-583583.log\n[I] Chiaki Version 2.1.1\n[I] Using hardware decoder \"vaapi\"\nDevice Found\ntype: 28de 1205\npath: /dev/hidraw3\nserial_number: \nManufacturer: Valve Software\nProduct: Steam Deck Controller\nRelease: 200\nInterface: 2\nUsage (page): 0x1 (0xffff)\n\n[I] Connected Steam Deck ... gyro online\n\n\n[I] Controller 0 opened: \"Microsoft X-Box 360 pad 0 (030079f6de280000ff11000001000000)\"\n[I] Starting session request for PS5\n[I] Trying to request session from 192.168.1.16:9295\n[I] Connected to 192.168.1.16:9295\n[I] Sending session request\n[I] OpenGL initialized with version \"4.6 (Core Profile) Mesa 22.2.4 (git-80df10f902)\"\n[I] Session request successful\n[I] Starting ctrl\n[I] Ctrl connected to 192.168.1.16:9295\n[I] Sending ctrl request\n[I] Ctrl received http header as response\n[I] Ctrl received ctrl request http response\n[I] Ctrl got Server Type: 2\n[I] Ctrl connected\n[I] Ctrl received Login PIN request\n[I] Ctrl requested Login PIN\n[I] Session received entered Login PIN, forwarding to Ctrl\n[I] Ctrl received entered Login PIN, sending to console\n[I] Steam Deck Haptics Audio opened with 2 channels @ 3000 Hz with 150 samples per audio analysis.\n[I] Ctrl received Login message: success\n[I] Ctrl received valid Session Id: 1673022831TZLW3NGFZP76ZLUPAOHZBA64PQQ2AF6LXUET2OFDTKAJF4XVGUAXOMOQDXBVVCAS\n[I] Starting Senkusha\n[I] Enabling DualSense features\n[I] Takion connecting (version 7)\n[I] Takion enabled Don't Fragment Bit\n[I] Takion sent init\n[I] Takion received init ack with remote tag 0xb18ccf, outbound streams: 0x64, inbound streams: 0x64\n[W] Received Ctrl Message with unknown type 0x16\n[W] offset 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef\n[W] 0 01 ff .. [I] Takion sent cookie\n[I] Takion received cookie ack\n[I] Takion connected\n[I] Senkusha sending big\n[I] Senkusha successfully received bang\n[I] Senkusha Ping Test with count 10 starting\n[I] Senkusha enabled echo\n[I] Senkusha sending Ping 0 of test index 0\n[I] Senkusha received Pong, RTT = 3.019 ms\n[I] Senkusha sending Ping 1 of test index 0\n[I] Senkusha received Pong, RTT = 2.841 ms\n[I] Senkusha sending Ping 2 of test index 0\n[I] Senkusha received Pong, RTT = 3.460 ms\n[I] Senkusha sending Ping 3 of test index 0\n[I] Senkusha received Pong, RTT = 2.504 ms\n[I] Senkusha sending Ping 4 of test index 0\n[I] Senkusha received Pong, RTT = 3.030 ms\n[I] Senkusha sending Ping 5 of test index 0\n[I] Senkusha received Pong, RTT = 2.778 ms\n[I] Senkusha sending Ping 6 of test index 0\n[I] Senkusha received Pong, RTT = 3.131 ms\n[I] Senkusha sending Ping 7 of test index 0\n[I] Senkusha received Pong, RTT = 2.795 ms\n[I] Senkusha sending Ping 8 of test index 0\n[I] Senkusha received Pong, RTT = 2.992 ms\n[I] Senkusha sending Ping 9 of test index 0\n[I] Senkusha received Pong, RTT = 3.064 ms\n[I] Senkusha disabled echo\n[I] Senkusha determined average RTT = 2.961 ms\n[I] Senkusha starting MTU in test with min 576, max 1454, retries 3, timeout 14 ms\n[I] Senkusha MTU request 1454 (min 576, max 1454), id 1, attempt 0\n[I] Senkusha MTU 1454 success\n[I] Senkusha determined inbound MTU 1454\n[I] Senkusha starting MTU out test with min 576, max 1454, retries 3, timeout 14 ms\n[I] Senkusha sent initial client MTU command\n[I] Senkusha received expected Client MTU Command\n[I] Senkusha MTU 1454 out ping attempt 0\n[I] Senkusha MTU ping 1454 success\n[I] Senkusha determined outbound MTU 1454\n[I] Senkusha sending final Client MTU Command\n[I] Senkusha is disconnecting\n[I] Senkusha closed takion\n[I] Senkusha completed successfully\n[I] Takion connecting (version 12)\n[I] Takion sent init\n[I] Takion received init ack with remote tag 0x7033129, outbound streams: 0x64, inbound streams: 0x64\n[I] Takion sent cookie\n[I] Takion received cookie ack\n[I] Takion connected\n[I] StreamConnection sending big\n[I] BANG received\n[I] StreamConnection successfully received bang\n[I] Crypt has become available. Re-checking MACs of 0 packets\n[W] Received Ctrl Message with unknown type 0x41\n[W] offset 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef\n[W] 0 00 00 00 00 02 01 00 00 ........ [D] StreamConnection received audio header:\n[D] offset 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef\n[D] 0 02 10 00 00 bb 80 00 00 01 e0 00 00 00 01 .............. [I] Audio Header:\n[I] channels = 2\n[I] bits = 16\n[I] rate = 48000\n[I] frame size = 480\n[I] unknown = 1\n[I] ChiakiOpusDecoder initialized\n[I] Audio Device alsa_output.pci-0000_04_00.1.hdmi-stereo-extra2 opened with 2 channels @ 48000 Hz, buffer size 19200\n[I] Video Profiles:\n[I] 0: 1920x1080\n[I] StreamConnection successfully received streaminfo\n[I] Switched to profile 0, resolution: 1920x1080\n[I] StreamConnection is disconnecting\n[I] StreamConnection sending Disconnect\n[I] StreamConnection was requested to stop\n[I] StreamConnection closed takion\n[I] StreamConnection completed successfully\n[I] Ctrl requested to stop\n[I] Ctrl stopped\n[I] Session has quit\n .__ .__ __ .__ _____ .___ __ \n____ | |__ |__|____ | | _|__| / | | __| _/____ ____ | | __\n_/ ___\\| | \\| \\__ \\ | |/ / |/ | |_/ __ |/ __ \\_/ ___\\| |/ /\n\\ \\___| Y \\ |/ __ \\| <| / ^ / /_/ \\ ___/\\ \\___| < \\___ >___| /__(____ /__|_ \\__\\____ |\\____ |\\___ >\\___ >__|_ \\\n\\/ \\/ \\/ \\/ |__| \\/ \\/ \\/ \\/\n.__ __ .___._.\n______ ___________|__|______/ |_ ____ __| _/| |\n/ ___// ___\\_ __ \\ \\____ \\ __\\/ __ \\ / __ | | |\n\\___ \\ \\___| | \\/ | |_> > | \\ ___// /_/ | \\|\n/____ >\\___ >__| |__| __/|__| \\___ >____ | __\n \\/ \\/ |__| \\/ \\/ \\/\n
Get your console nickname
It was the nickname listed with your console in the console widget. It can also be obtained with
flatpak run io.github.streetpea.Chiaki4deck list\n
Example Output
Host: PS5-012\n
In this example, the console nickname is PS5-012, please use your nickname. If you have multiple, choose the one from the list you want and choose the corresponding regist_key in the next step (i.e., if you pick the console on the 2nd line here, pick the regist_key on the 2nd line in the next step).
This command is printing the Chiaki configuration file generated when you ran chiaki4deck for the first time. This is where the flatpak version of Chiaki saves your settings and details. In fact, all flatpaks store their details with the ~/.var/app/app_id pattern. If you want to look at the file itself and get the value you can open the file at /home/deck/.var/app/io.github.streetpea.Chiaki4deck/config/Chiaki/Chiaki.conf and look for the remote play registration key [rp_regist_key].
Choose your default launch option (fullscreen, zoom, or stretch)
fullscreen: A full screen picture with black bars, aspect ratio maintained
zoom: A full screen zoomed picture with no black bars, aspect ratio maintained, edges of image cut off by zoom
stretch: A full screen stretched picture with no black bars, aspect ratio slightly distorted by vertical [in the case of Steam Deck] stretch
Default Launch Option
This is the option remote play will launch with. You can always toggle to a different option by using the Ctrl+S (toggles between stretch and normal) and Ctrl+Z (toggles between zoom and normal) options which should be set if desired in the Steam controller configuration for the game. See Controller Configuration Section for more details.
Get your 4 digit PlayStation login passcode (if applicable). You will know your PlayStation login passcode if you have one because you have to enter it every time you log onto your PlayStation console. If you don't have to do this, you don't have a PlayStation login passcode and will leave that field blank.
Create a new blank file located in the folder /home/deck/.var/app/io.github.streetpea.Chiaki4deck/config/Chiaki named Chiaki-launcher.sh
Open the /home/deck/.var/app/io.github.streetpea.Chiaki4deck/config/Chiaki/Chiaki-launcher.sh file in your favorite editor and save the following output.
#!/usr/bin/env bash\n\nconnect_error_loc()\n{\necho \"Error: Couldn't connect to your PlayStation console from your local address!\" >&2\necho \"Error: Please check that your Steam Deck and PlayStation are on the same network\" >&2\necho \"Error: ...and that you have the right PlayStation IP address or hostname!\" >&2\nexit 1\n}\n\nconnect_error_ext()\n{\necho \"Error: Couldn't connect to your PlayStation console from your external address!\" >&2\necho \"Error: Please check that you have forwarded the necessary ports on your router\" >&2\necho \"Error: ...and that you have the right external PlayStation IP address or hostname!\" >&2\nexit 1\n}\n\nwakeup_error()\n{\necho \"Error: Couldn't wake up PlayStation console from sleep!\" >&2\necho \"Error: Please make sure you are using a PlayStation 5.\" >&2\necho \"Error: If not, change the wakeup call to use the number of your PlayStation console\" >&2\nexit 2\n}\n\ntimeout_error()\n{\necho \"Error: PlayStation console didn't become ready in 35 seconds!\" >&2\necho \"Error: Please change 35 to a higher number in your script if this persists.\" >&2\nexit 1\n}\nif [ \"$(iwgetid -r)\" == \"<local_ssid>\" ]\nthen\naddr=\"<local_addr>\"\nlocal=true\nelse\naddr=\"<external_addr>\"\nlocal=false\nfi\nSECONDS=0\n# Wait for console to be in sleep/rest mode or on (otherwise console isn't available)\nps_status=\"$(flatpak run io.github.streetpea.Chiaki4deck discover -h ${addr} 2>/dev/null)\"\nwhile ! echo \"${ps_status}\" | grep -q 'ready\\|standby'\ndo\nif [ ${SECONDS} -gt 35 ]\nthen\nif [ \"${local}\" = true ]\nthen\nconnect_error_loc\n else\nconnect_error_ext\n fi\nfi\nsleep 1\nps_status=\"$(flatpak run io.github.streetpea.Chiaki4deck discover -h ${addr} 2>/dev/null)\"\ndone\n\n# Wake up console from sleep/rest mode if not already awake\nif ! echo \"${ps_status}\" | grep -q ready\nthen\nflatpak run io.github.streetpea.Chiaki4deck wakeup -<playstation_console> -h ${addr} -r '<remote_play_registration_key>' 2>/dev/null\nfi\n\n# Wait for PlayStation to report ready status, exit script on error if it never happens.\nwhile ! echo \"${ps_status}\" | grep -q ready\ndo\nif [ ${SECONDS} -gt 35 ]\nthen\nif echo \"${ps_status}\" | grep -q standby\n then\nwakeup_error\n else\ntimeout_error\n fi\nfi\nsleep 1\nps_status=\"$(flatpak run io.github.streetpea.Chiaki4deck discover -h ${addr} 2>/dev/null)\"\ndone\n\n# Begin playing PlayStation remote play via Chiaki on your Steam Deck :)\nflatpak run io.github.streetpea.Chiaki4deck --passcode <login_passcode> --<launch_option> stream '<console_nickname>' ${addr}\n
Edit the /home/deck/.var/app/io.github.streetpea.Chiaki4deck/config/Chiaki/Chiaki-launcher.sh file, replacing the following values for your values:
<local_ssid> local network name found with:
Via konsoleVia GUI
iwgetid -r\n
Must Be Currently Connected to Local Network
You must be connected to your current local network for this konsole method to work. Otherwise, it will give you the network you are currently connected to or nothing (if you're not currently connected to a network). If you're not connected to your home network you can view your SSID via the GUI using the Via GUI tab.
The connection name/SSID for your home network in Steam Deck network settings such as StreetPea-5G.
<local_addr> with local PlayStation IP
<external_addr> with external IP or hostname.
Filling this in Later
You can use your local PlayStation IP or something like foo.bar.com as a placeholder if haven't set up an external IP/hostname yet. Then, if you decide to set up an external connection, you can manually substitute the \"real\" external IP/hostname.
<console_nickname>
Beware of '
If you have any ' in your nickname itself, such as Street Pea's PS5, you will need enter the ' as '\\''. Thus, for Street Pea's PS5 instead of using Street Pea's PS5 you would use Street Pea'\\''s PS5. All other characters are fine. This is due to the PlayStation console allowing any manner of names (including non-valid hostnames with all manner of special characters) and Chiaki using that name in its configuration file.
<remote_play_registration_key>
<launch_option>
<playstation_console> (either 4 or 5)
<login_passcode> (just erase this field if you don't have a login passcode)
Example Script with \"fake\" values [yours will be different]
#!/usr/bin/env bash\n\nconnect_error_loc()\n{\necho \"Error: Couldn't connect to your PlayStation console from your local address!\" >&2\necho \"Error: Please check that your Steam Deck and PlayStation are on the same network\" >&2\necho \"Error: ...and that you have the right PlayStation IP address or hostname!\" >&2\nexit 1\n}\n\nconnect_error_ext()\n{\necho \"Error: Couldn't connect to your PlayStation console from your external address!\" >&2\necho \"Error: Please check that you have forwarded the necessary ports on your router\" >&2\necho \"Error: ...and that you have the right external PlayStation IP address or hostname!\" >&2\nexit 1\n}\n\nwakeup_error()\n{\necho \"Error: Couldn't wake up PlayStation console from sleep!\" >&2\necho \"Error: Please make sure you are using a PlayStation 5.\" >&2\necho \"Error: If not, change the wakeup call to use the number of your PlayStation console\" >&2\nexit 2\n}\n\ntimeout_error()\n{\necho \"Error: PlayStation console didn't become ready in 35 seconds!\" >&2\necho \"Error: Please change 35 to a higher number in your script if this persists.\" >&2\nexit 1\n}\nif [ \"$(iwgetid -r)\" == \"StreetPea-5G\" ]\nthen\naddr=\"192.168.1.16\"\nlocal=true\nelse\naddr=\"foo.bar.com\"\nlocal=false\nfi\nSECONDS=0\n# Wait for console to be in sleep/rest mode or on (otherwise console isn't available)\nps_status=\"$(flatpak run io.github.streetpea.Chiaki4deck discover -h ${addr} 2>/dev/null)\"\nwhile ! echo \"${ps_status}\" | grep -q 'ready\\|standby'\ndo\nif [ ${SECONDS} -gt 35 ]\nthen\nif [ \"${local}\" = true ]\nthen\nconnect_error_loc\n else\nconnect_error_ext\n fi\nfi\nsleep 1\nps_status=\"$(flatpak run io.github.streetpea.Chiaki4deck discover -h ${addr} 2>/dev/null)\"\ndone\n\n# Wake up console from sleep/rest mode if not already awake\nif ! echo \"${ps_status}\" | grep -q ready\nthen\nflatpak run io.github.streetpea.Chiaki4deck wakeup -5 -h ${addr} -r '2ebf539d' 2>/dev/null\nfi\n\n# Wait for PlayStation to report ready status, exit script on error if it never happens.\nwhile ! echo \"${ps_status}\" | grep -q ready\ndo\nif [ ${SECONDS} -gt 35 ]\nthen\nif echo \"${ps_status}\" | grep -q standby\n then\nwakeup_error\n else\ntimeout_error\n fi\nfi\nsleep 1\nps_status=\"$(flatpak run io.github.streetpea.Chiaki4deck discover -h ${addr} 2>/dev/null)\"\ndone\n\n# Begin playing PlayStation remote play via Chiaki on your Steam Deck :)\nflatpak run io.github.streetpea.Chiaki4deck --passcode --zoom stream 'PS5-012' ${addr}\n
Example is Without Login Passcode #
If you have a passcode you would set it like --passcode 1111, changing the last line of the example above to flatpak run io.github.streetpea.Chiaki4deck --passcode 1111 --zoom stream 'PS5-012' 192.168.1.16
Chiaki launched in your desired screen mode on your Steam Deck! Congratulations!
You are no longer on the happy path
Script fails before launching stream windowError in stream window
Check the error message and fix issues if obvious. Otherwise, things to check:
Make sure your PlayStation console is in either rest/sleep mode or on (otherwise this won't work)
Double check the values you entered in the script to make sure they are correct.
Open your script at: /home/deck/.var/app/io.github.streetpea.Chiaki4deck/config/Chiaki/Chiaki-launcher.sh and try to run each command individually to see what's causing your problem.
If issues persist with this and chiaki4deck launches fine regularly via the application link, just not the automation, feel free to reach out. If you think the documentation itself needs to be updated click the underneath \"Was this page helpful?\" and open the feedback form for this page. If you just need help, you can reach me via Reddit or email
Close chiaki4deck gracefully by closing any open dialog boxes and then using Ctrl+Q on the stream window. If chiaki4deck doesn't close gracefully, move your mouse to the top left corner of the stream window and a blue circle should highlight the corner of the screen. Click on it to see all of your windows and select the konsole window. Then, close the konsole window itself (click its x icon in the top right corner). Next, you can relaunch the script again to make sure it wasn't a one-time snafu. Note: Chiaki seems to perform better (audio/visual quality) in Game Mode vs. Desktop Mode for me. If issues persist, feel free to reach out via Reddit or email. If you think the documentation itself needs to be updated click the underneath \"Was this page helpful?\" and open the feedback form for this page.
"},{"location":"setup/configuration/","title":"Configuring chiaki4deck","text":""},{"location":"setup/configuration/#registering-your-playstation","title":"Registering your PlayStation","text":"Upgrading from Using Chiaki Flatpak on Steam DeckNew to Using Chiaki on Steam Deck
Make sure you're on the right tab!
If you haven't set up the Chiaki flatpak on Steam Deck, please switch to the New to Using Chiaki on Steam Deck Tab. If you have set up the official Chiaki flatpak before (no, you don't have to uninstall Chiaki ) and want to try chiaki4deck, you're in the right place!
Create initial file templates for chiaki4deck
Open chiaki4deck by clicking the Steam icon in the bottom left and searching for it in the Games section via the graphical user interface (GUI) or by entering flatpak run io.github.streetpea.Chiaki4deck in the konsole.
What if chiaki4deck doesn't appear in the Games section?
If chiaki4deck doesn't appear in the Games section, go to All Applications and search for chiaki4deck there. It should show up in the Games section, but I've noticed that sometimes it only shows up in its appropriate section after a restart. Going to All Applications works in all cases.
Close chiaki4deck
Copy your configuration file from the Chiaki flatpak with the following konsole command
Open chiaki4deck again and you should see your registered console and settings from Chiaki now copied to chiaki4deck.
What Did I Just Do?
You just replaced the config file (flatpak stores config files for each app in ~/.var/app/appid/config where appid is your app's appid) for chiaki4deck (which doesn't have your details yet) with the one for Chiaki (which you already went through the registration process and configured settings for) so that you don't have to go back through the same process with chiaki4deck and can start using it as quickly as possible.
Set up your PlayStation console for remote play
Enable remote play
PS5PS4
Go to Settings -> System -> Remote Play and turn on:
Enable Remote Play
Go to Settings -> Remote Play Connection Settings and turn on:
Enable Remote Play
Go to Settings -> Account Management -> Activate as Your Primary PS4 and select:
Activate
Enable waking your console from rest mode
PS5PS4
Go to Settings -> System -> Power Saving -> Features Available in Rest Mode and turn on:
Stay Connected to the Internet
Enable Turning on PS5 from Network
Go to Settings -> Power Save Settings -> Set Function Available in Rest Mode and turn on:
Stay Connected to the Internet
Enable turning on PS4 from Network
Get your PlayStation AccountID (This is needed to access your ps account)
Using Gui (Linux and MacOS only)Using konsole (Flatpak only)Using public website
Wait until step 5 below when you are registering your console, hit the PSN Login button and login to your PlayStation account on the window that opens.
Run the flatpak with the psn-account-id command
flatpak run --command=psn-account-id io.github.streetpea.Chiaki4deck\n
Follow the prompts, opening a browser and logging in with your PlayStation network account details when prompted.
Copy the Account-ID you receive and store it in a safe place. This is the Account-ID used for remote play that is associated with your PlayStation online account username and password.
Change your PSN privacy settings to allow anyone to find you in your search
Go to psn.flipscreen.games
Enter your Account ID
Copy your encoded id for Chiaki
Open chiaki4deck (click the Steam icon in the bottom left and search for it in the Games section via GUI or flatpak run io.github.streetpea.Chiaki4deck via konsole) and your PlayStation system should be automatically discovered.
What if my PlayStation Console isn't Appearing?
Make sure your Steam Deck is on the same wireless network as your PlayStation system and that the PlayStation console is either on or in sleep/rest mode. If this doesn't work, you can always try restarting your Steam Deck and connecting to the network again. If it still doesn't work you can try the Manual Registration step in step 5 below.
Double click on the blue box to bring up a registration window
Choose your console type
Enter your PSN Account-ID obtained in step 1 above (if not automatically copied).
Get a registration code for remote play
PS5PS4
Go to Settings -> System -> Remote Play -> Link Device
Go to Settings -> Remote Play -> Add Device
Enter the code from your device in the PIN field
Click Register (will become available when all necessary fields are filled)
Click the gear icon in the top right to go to Settings
Click the consoles tab
Click the blue Register New button to bring up a registration window
Enter your PlayStation's ip address in the Host section replacing 255.255.255.255
You can obtain your PlayStation's ip address by going in your PlayStation console's settings and going to:
PS5PS4
System->System Software->Console Information and looking at the IPV4 Address
Network->View Connection Status and looking at the IP Address.
Choose your console type
Enter your PSN Account-ID obtained in step 1 above (if not automatically copied).
Get a registration code for remote play
PS5PS4
Go to Settings -> System -> Remote Play -> Link Device
Go to Settings -> Remote Play -> Add Device
Enter the code from your device in the PIN field
Click Register (will become available when all necessary fields are filled)
You should see this upon successful registration
Click out of the dialog boxes and see that your console now shows registered
"},{"location":"setup/configuration/#testing-your-connection","title":"Testing your Connection","text":"
Test waking your console from rest mode
Put your console in rest mode
Open chiaki4deck
Double click on the box with the console icon colored orange (State: standby).
When prompted with, \"The Console is currently in standby mode.Should we send a Wakeup packet instead of trying to connect immediately?\":
choose Yes
Your PlayStation console should wake up and the box with the console icon should turn from orange to blue (State: ready).
Your PlayStation has awoken from slumber! Your PlayStation hit the snooze button
Success
Now it's time to test connecting via PlayStation Remote Play in the next step!
Here's how to get back on the happy path
Make sure your PlayStation shows as registered and is currently in sleep mode. If it's not in sleep mode, you can't wake it up.
Make sure that you have enabled turning on your PlayStation console from rest mode:
PS5PS4
Go to Settings -> System -> Power Saving -> Features Available in Rest Mode and turn on:
Stay Connected to the Internet
Enable Turning on PS5 from Network
Go to Settings -> Power Save Settings -> Set Function Available in Rest Mode and turn on:
Stay Connected to the Internet
Enable turning on PS4 from Network
Test PlayStation Remote Play
Double click on the box with the now blue console icon (State: ready)
Test launching a game if you want
Exit out of the window once you've tested the connection.
It worked! It didn't work
Purrfect
You were able to launch your stream and connect. Maybe, you even got a game running.
An error occurred
Please try closing and re-launching to make sure it wasn't some sort of temporary snafu (maybe your console was updating something and didn't want to let you connect right away).
Make sure your PlayStation appears in the Chiaki menu, is labelled (registered) and is animated with either an orange (State: standby) or blue (State: ready) light.
"},{"location":"setup/configuration/#choosing-your-remote-play-settings","title":"Choosing your Remote Play Settings","text":"
Here are different settings you can use for Chiaki/chiaki4deck depending on your network connection. The default configuration is for remote play on a home network only. This means that it is dependent only on the performance / strength of your wireless router (or ethernet connection) [recommended to connect the PlayStation console via ethernet and Steam Deck via wi-fi to optimize performance and portability] and not on your Internet (World Wide Web) connection.
What does that mean for me?
If you are in an area with bad Internet, as long as you have a good wireless router, you can get close to native performance.
Open chiaki4deck and click the gear icon in the top right to open the settings menu
Adjust the settings to your preferences.
General Settings for Steam Deck
Enabling Experimental PlayStation 5 Features (PS5 Users Only)
If you want to enable haptics for Steam Deck and DualSense (must be attached via USB) and adaptive triggers for DualSense (USB or bluetooth), check the box that the red arrow is pointing to in the image above. This is opt-in now since these features are currently experimental. Additionally, for the DualSense controller to work with these features in game mode, please disable Steam Input for the DualSense controller following the \"Turning off Steam Input\" tab in this section.
Use Buttons by Position Instead of by Label
This enables the option to use the face buttons of your controller by position (i.e., NSEW) as opposed to by their label (i.e., ABXY). This enables you to use a Nintendo-style controller and still be able to use the buttons in the same positions as on a PlayStation controller instead of the swapped Nintendo controller positions.
Use Steam Deck in Vertical Orientation
For Steam Deck, this enables the option to use the Steam Deck in vertical orientation in games that assume a horizontal controller for motion controls. Since most PlayStation games assume a horizontal facing controller, (even though data is sent for using the controller in any orientation) most games only work if the Steam Deck is horizontal (like you would hold a DualSense/DualShock 4 controller). This option enables you to play those games in vertical mode by allowing you to use roll instead of yaw and having a vertical orientation correspond to a horizontal facing controller. Some games, such as Astro's playroom use the orientation values and enable you to use the controller in various different positions (i.e. this option isn't needed for using the controller in vertical orientation for that small subset of games).
Putting your PlayStation Console to Sleep Automatically
For Action on Disconnect, choose Ask (the default) to get prompted (use the touchscreen to respond to prompt window) about putting your PlayStation to sleep when you close your session with Ctrl+Q (you will add this shortcut as part of you controller configuration in controller section).
If you prefer, you can also use Enter Sleep Mode to automatically put your PlayStation console to sleep as soon as you close your session with Ctrl+Q
Audio/WiFi Settings for Steam Deck
Below are the Video Settings you'll want to try first with your PlayStation console (choose the PS5/1080p HDR tab if you have a PS5 connected to a HDR TV/monitor (see HDR section below for more details), PS5/1080p if you have a PS5 not connected to an HDR TV/monitor, and PS4/720p if you have a PS4). If you are having issues with your PS5 connection, please try the PS4/720p settings with your PS5 since they require significantly less bandwidth from your wireless router.
PS5/1080P HDRPS5/1080PPS4/720P
Stream output can be up to 1080p with HDR. Here are the settings that are currently working well for me. This results in a native-like experience for most games on my network/setup.
Stream output can be up to 1080p. Here are the settings that are currently working well for me. This results in a native-like experience for most games on my network/setup.
Why 1080p if the Steam Deck is only 800p?
Using 1080p results in a better picture for me than 720p. The biggest factor in this seems to be chroma-sub sampling. In simple terms, the colors for an image are compressed and so you get a much lower resolution of color data than your image resolution. This means a 1080p image (with a high bitrate) will have more color data than a 720p image even if the image resolution itself ends up being 720p (since the color resolution will be higher than the equivalent 720p picture's color resolution). This results in an image that has more pop to it. Thus, I recommend streaming at 1080p if you have the bandwidth (good enough wireless router).
However, if you are having issues with your wireless connection (i.e choppy audio, flashes in your video, or lag) while playing, then please use 720p instead. The gains you get from 1080p are nice, but aren't worth having a bad connection.
For PS4, the stream is limited to 720p. Using the defaults for most values works well here, resulting in native-like (albeit w/ a diminished resolution) experience for most games on my network/setup.
HDR is now supported when you select the H265 HDR (PS5 only) codec option. For HDR to work you need to:
Use an HDR device such as the Steam Deck OLED or an OLED monitor attached to an LCD Steam Deck for streaming (non-HDR device will still work but use tonemapping instead of outputting HDR)
How do I know when HDR is active on my Steam Deck?
You can see when HDR is active by hitting the quick access button (3 dots button on the bottom right of the Steam Deck) going to the gear icon and looking at BRIGHTNESS. When HDR is active there will be a purple/blue banner to the right of the BRIGHTNESS label.
Connect your PS5 to a device such as an HDR TV or monitor (depending on the connected HDR TV/monitor it may also need to be turned on for the PS5 to output HDR)
How do I know if the PS5 is outputting HDR?
You can test the PS5 is outputting HDR by going to a game that has HDR settings in the menu such as Cyberpunk 2077 or Ghost of Tsushima and seeing if the game will let you adjust those.
Enable HDR in your PS5 settings (need to be connected directly to your PS5 and not via remote play to access this menu) by going to Settings -> Screen and Video -> Video Output -> HDR and selecting either Always On or On When Supported.
Select H265 HDR (PS5 only) as your codec option in chiaki4deck
Launch chiaki4deck via gamescope (i.e., game mode on the Steam Deck)
Adjusting PS5 HDR for Steam Deck
You can adjust the PS5 HDR settings for optimal viewing on the Steam Deck via the system-wide PS5 settings (need to be connected directly to your PS5 and not via remote play to access this menu) by going to Settings -> Screen and Video -> Video Output -> Adjust HDR. You'll want to do this if your display brightness (i.e., nits) is different from the Steam Deck OLED's 1000 nits. According to the folks over at HDTVTest (via arshiatn) for an 1000 nits display you want to use 15-15-0 for the HDR settings. To set this in the Adjust HDR set move 15 steps (15 presses of the right key on the dpad of the PlayStation controller) for the first test screen, 15 steps from the beginning for the 2nd test screen and 0 steps from the beginning on the last test screen.
Please note that this will also affect the settings for your connected display so if you are switching between remote play and TV play often keep that in mind. Certain games also have their own HDR settings you can adjust while remote playing in their respective game menus or when beginning the game.
If you have one console you want to connect to remotely or locally you can use the auto-connect feature to launch it automatically on launch. If you have multiple consoles to launch into you can instead use the automation section.
"},{"location":"setup/configuration/#performance-of-chiakichiaki4deck","title":"Performance of Chiaki/chiaki4deck","text":""},{"location":"setup/configuration/#my-experience","title":"My Experience","text":"
Ultimately, the performance will depend on the capability of your wireless router and which system (\\(PS5 > PS4 Pro > PS4\\)) you are using. Here are some notes from my experience using chiaki4deck on my Steam Deck with a PS5 console and a relatively good (\\(450 Mbps\\) for \\(2.4GHz\\) / \\(1,300 Mbps\\) for \\(5GHz\\)) wireless router.
My Wireless Connection by the Numbers
I'm using the \\(5GHz\\) band for chiaki4deck on my Steam Deck, meaning the total bandwidth for all devices on my local network is \\(1,300 Mbps\\) (remember Internet connection itself doesn't matter since we're only using our wireless router for local streaming). Since I am using the settings in Choosing Your Remote Play Settings, I'm using \\(30,000 Kbps\\) or \\(30 Mbps\\) out of the total of \\(1,300 Mbps\\). This means I'm using about \\(2\\%\\) of my \\(5GHz\\) band. In other words, I still have plenty of bandwidth for watching Netflix while I play on my Steam Deck!
What Performance Can I Expect?
I am currently getting close to native performance using chiaki4deck on my Steam Deck with my PS5. This gives me better performance than I get playing performance heavy games directly on Steam Deck (like that one game where the kid gets bit by a )
Benefits:
5-6 hours of battery life (vs 1-2 hours playing the same games natively on Steam Deck)
access to PlayStation collection (games I have already purchased or have via PS Plus) including exclusives
no fan noise when playing
PlayStation Trophies
Negatives:
occasional performance issues with certain games (specifically games with VSync enabled)
Games I've Played Successfully Using chiaki4deck So Far...
Stray
God of War (2018)
Genshin Impact (turned off VSync in settings to get rid of white flashes during gameplay)
Sekiro (occasional white flashes in areas with high crowds. Luckily, these went away as I got further in the game and never affected my ability to progress. Unfortunately, this seems to be due to VSync being enabled automatically with no option to turn it off. It only affected about 3 hours of the game in total [12 flashes with 1 or 2 every 15-30 minutes or so] before it went away completely).
Fall Guys
MultiVersus
Red Dead Redemption 2
Marvel's Spider Man
Ghost of Tsushima (changed from Resolution Mode to Performance Mode in game settings for native-like performance)
If you are not using the settings listed in Choosing Your Remote Play Settings, try with those settings and see if that fixes it for you. The biggest of these is using a HW Decoder option for your system which should help significantly.
If you are on Steam Deck OLED and you are using the Steam Deck after waking up from sleep, please trying turning the wifi off and then back on in the Steam Deck settings and see if this improves your performance (this is likely due to a WiFi driver issue with the Steam Deck OLED on certain networks so can't be fixed by Chiaki4deck)
Switch to 720p from 1080p
720p requires less bandwidth than 1080p. This will help if your wireless connection is the problem, especially since it's very easy to do. This can fix video artifacts (white / green flashes) and audio choppiness (both results of connection problems).
Try short preamble
If you are still having trouble (I didn\u2019t need this but it can help in general and helped significantly improve performance for other streaming services such as Game Pass on my Steam Deck), try using using short preamble instead of long preamble in your router settings. You need to change this directly in your router settings for the given network and can do it per network if you set up more than one. This is incompatible with old devices (using wifi b/g instead of n or ac). Devices from 2011 and newer are required by law to support it and so will definitely work. Older devices may or may not support it depending on if they have either n or ac wireless support. Short preamble helps the \\(5GHz\\) connection for devices that support it (essentially anything that\u2019s connecting on a \\(5GHz\\) network should use it). For streaming, you can set up one network that uses short for your newer devices (\\(5GHz\\) network for me) and one with long for older devices (\\(2.4 GHz\\) network for me since older devices don\u2019t support \\(5GHz\\) anyway). My connection worked fine with long preamble on a \\(2.4 GHz\\) network for Chiaki but short (and a \\(5GHz\\) network for that matter) works better in general for devices that support it and has helped others using Chiaki as well as me to help reduce Game Pass streaming lag (which is still much worse than Chiaki and not close to native, but works well for games that don\u2019t require fast or moderately fast reaction times).
For specific game issues, change game resolution settings
For example, the game may be set to 4k / resolution mode even though it's only streaming at 1080p or even 720p. Additionally, it may be using HDR (which the Steam Deck screen doesn't support). Switching these settings off on a game level results in less processing power used on the game and thus more left over for streaming as well as hitting a higher framerate. For example, I switched Ghost of Tsushima from resolution mode to performance mode and noticed that the occasional performance problems I was experiencing evaporated and the visual quality became much more stable due to the lack of occasional stutters. It went from being playable but a noticeable downgrade to indistinguishable from native.
Turn off VSync or the equivalent in games that use it
VSync should only be enabled on the client side while streaming and having it enabled in the game itself can cause issues since it requires some extra overhead and can't actually sync with your screen if you're streaming the game. This resulted in issues with white flashes for me while playing Genshin Impact and Sekiro. When I turned off VSync in the Genshin Impact settings, these flashes (which had happened multiple times a minute with VSync on) disappeared. This affects only a small number of games, but is something to watch out for if you randomly have an issue with one game while others run well with Chiaki/chiaki4deck.
Switch framerate to 30fps
30fps requires less bandwidth than 60fps. This will help if your wireless connection is the problem, especially since it's very easy to do. This can fix video artifacts (white / green flashes) and audio choppiness (both results of connection problems). I put this last because it is the biggest performance downgrade and most of the time you don't need to do this. However, switching to 30fps / 720p at the default settings is the most surefire way to fix connection issues and a last resort if the methods with virtually no downsides don't do the trick.
"},{"location":"setup/configuration/#chiakichiaki4deck-via-internet-outside-of-home-connection","title":"Chiaki/chiaki4deck via Internet (Outside of Home Connection)","text":"
Chiaki/chiaki4deck Outside of your Home Network
You can also either the remote connection via PSN or open up ports to connect from the Internet, but the performance will not be as good, with increased input lag being the most noticeable downgrade. In this scenario, your connection will depend on both the Internet connection of your PlayStation console via the router and the Internet connection of your computer via your location (internet speeds themselves will apply). The farther away (more hops from your router) you get, the worse the performance will get. If you are still in the same state, it will likely still be relatively good. However, if you go cross-country or something like that, it can degrade significantly. Nevertheless, it can be very convenient to use while traveling, especially when playing less timing intensive games (i.e., games that would play well via cloud streaming). Setup is covered in the remote connection section.
If you created the Steam Shortcut through the menu, it automatically adds the correct chiaki4deck+ mic controller profile for you on Steam Deck.
Get all of the shortcuts mapped to Steam Deck controls. Start by going to the chiaki4deck game menu and selecting the controller layout to configure controller options.
Game ModeDesktop Mode "},{"location":"setup/controlling/#retrieving-chiaki4deck-controller-layouts-when-using-an-alternate-game-name-most-users-can-skip-this","title":"Retrieving chiaki4deck Controller Layouts when Using An Alternate Game Name [Most Users Can Skip This]","text":"Only If You Didn't Use chiaki4deck As the Name of the Game in Steam [Click to Open Me]
Change the name of your game (i.e., Playstation Launcher Thingamajig) temporarily to chiaki4deck
Open the properties menu of Playstation Launcher Thingamajig (whatever you called it) by hitting the options button when selecting the game or the gear icon on the game page and selecting Properties... from the menu that pops up.
Change the game name to chiaki4deck
Get the controller layout from the COMMUNITY LAYOUTS via the normal process.
Click the current layout box (it says: Browse Community Layouts for games without official controller support underneath it).
Move to the COMMUNITY LAYOUTS tab and select chiaki4deck+ mic by gmoney23
Export the layout as a Personal Save
Click the gear icon and select Export Layout as the option
Save the layout as a New Personal Save
Change your game name to whatever you would like
Go back into the properties menu for the game
Change your game name back to what you wanted
Choose the desired layout which is now available for your differently named game
Click on your current layout
Select the saved community layout from the YOUR LAYOUTS tab
Play with the layout
Getting Steam Controls for Non-Steam Games
An interesting aside is that you can exploit this same process to get the official controller layout for a game that has a Steam version but you added as a non-Steam game. In that instance, you would be changing the game name to the Steam App ID for that game which you can find by searching SteamDB here among other ways (i.e., looking at the # in the URL of the game on the Steam Store).
The easiest way to configure all of the necessary shortcuts for chiaki4deck is to copy the profile I have created in the COMMUNITY LAYOUTS tab.
Click the current layout box (it says: Browse Community Layouts for games without official controller support underneath it).
Move to the COMMUNITY LAYOUTS tab and select chiaki4deck+ mic by gmoney23 (the chiaki4deck+ layout was from before the toggle mic mute button mapping to the L4 back button was added and the original chiaki4deck layout was from before touchpad mapping to the trackpad and touchscreen was added)
"},{"location":"setup/controlling/#default-chiaki4deck-layout-mapping-full-view","title":"Default chiaki4deck Layout Mapping Full View","text":""},{"location":"setup/controlling/#default-chiaki4deck-layout-touchscreen-mapping","title":"Default chiaki4deck Layout Touchscreen Mapping","text":"
Use native gestures and swiping the touchscreen to perform touchpad actions. Please keep in mind that the touchscreen is mapping to the PlayStation touchpad (that is what the PlayStation console / games expect) so it behaves like a touchpad (i.e., cursor position moves based on your gesture relative to the current cursor position instead of snapping to your finger location). This is important to note for games with a cursor such as Chicory: A Colorful Tale as it can seem weird when using a touchscreen but is actually correct / desired in this case.
Use the edges of the touchscreen (top, bottom, left, or right 5% of the screen) to activate touch click.
Games with Region-Based Touchpad Click
For games that separate the PlayStation touchpad into 3 regions, you can use a left edge touchscreen tap for left touchpad click, right edge touchscreen tap for right touchpad click and top or bottom middle of the touchscreen tap for middle touchpad click.
I have mapped the left trackpad as the PlayStation button and the right trackpad as the PlayStation controller touchpad (press for touchpad click and swipe for touchpad gestures). This essentially works the exact same way as when you're playing with the DualSense of DualShock4 touchpad. You touch/swipe for gestures and click for touchpad click.
The touchpad gestures are mapped using a mouse region with left mouse click on touch (i.e., simulates holding down the Left Button while moving a mouse) and the touchpad click is mapped to T.
Right Click Works too
Clicking the mouse Right Button instead of the T key would have the same effect.
"},{"location":"setup/controlling/#default-chiaki4deck-layout-back-button-mapping","title":"Default chiaki4deck Layout Back Button Mapping","text":"
I have mapped L4 to toggle mic mute, L5 to end session (Ctrl+Q), R4 to zoom (Ctrl+Z), and R5 to stretch (Ctrl+S).
I have also mapped gyro controls As joystick. Whenever you touch the right joystick, you can move the Steam Deck to aim / control the right stick (usually mapped to camera control) with motion (gyro) controls. You can use this on its own or for small adjustments to larger camera movements made by directly moving the right joystick. You can always change this by choosing to edit the layout and going into the gyro settings.
Native Gyro for Steam Deck
Gyro is also directly mapped under the hood for the Steam Deck controller. Thus, when you play a game that has native gyro controls, those will work without needing to do anything in your control mapping via Steam Input. When you are playing a game with native gyro support, you may want to change the gyro mapping from As joystick to None so that gyro only maps to gyro in the game (i.e., you don't move the camera while trying to move a paintbrush using native gyro).
Of course, you could leave the right stick mapping on (so that it maps to both gyro and right joystick), if that is truly what you want.
"},{"location":"setup/controlling/#creating-your-own-controller-profile","title":"Creating your Own Controller Profile","text":"
You can create your own controller profile by mapping the relevant buttons. The special button mappings (functions not assigned to the controller by default) [set these] and the standard button mappings (controls that directly map and are thus assigned by default) [no need to set these unless you prefer different mappings] are listed in tables below for your convenience.
"},{"location":"setup/controlling/#special-button-mappings-you-need-to-assign-these-yourself","title":"Special Button Mappings (You need to assign these yourself)","text":"Function Button Description Quit Ctrl+Q Close chiaki4deck cleanly, putting console in sleep mode if desired Zoom Ctrl+Z Toggle between zoom (zoomed in to eliminate borders, cutting off edge of screen) and non-zoom (black borders) Stretch Ctrl+S Toggle between stretch (stretched to eliminate borders, distorting aspect ratio of image), and non-stretch (black borders with default aspect ratio) PlayStation Button Esc The PlayStation / home button as it normally functions on a PlayStation controller Share Button F The Share button on the PS5 controller used for taking screenshots, videos, etc. stored on your PS5 and uploaded to the PlayStation app on your phone if you so choose. Touchpad Click T, mouse Right Button, tapping border (top, bottom, left or right 5%) of the touchscreen These actions will all result in a touchpad click. For games that separate the touchpad into multiple regions, they work in conjunction with either the current mouse location (location of finger on Steam Deck trackpad) or current finger location (which edge of the touchscreen you tapped) to delineate which region you are using (most games just have one region for touchpad click though). Touchpad MotionTouchscreen touch, mouse Left Button + Mouse Movement (i.e., drag action / mouse region touch). Maps to the PlayStation touchpad (since that's what PlayStation games / the remote streaming console expect). This means that the \"cursor\" (if one is defined for the game like in Chicory: A Colorful Tale) moves according to your gestures but does not snap/follow your fingers' locations (i.e., it behaves like a touchpad as it should). Toggle Mic Mute Ctrl+M The toggle microphone mute on and off button on the PlayStation controller. Stream Menu Ctrl+O This brings up a stream menu which shows things like your current Mbps.
Two Button Shortcuts
If you want to create a shortcut that includes 2 buttons like Ctrl+Q, add the first key (i.e., Ctrl) and then click the gear icon to the right of the added command (i.e., Ctrl) and select Add sub command. Finally, fill in the new blank rectangle that appears with the desired second key (i.e., Q)
"},{"location":"setup/controlling/#using-steam-deck-controller-touchscreen-in-your-custom-controller-profile","title":"Using Steam Deck Controller Touchscreen in Your Custom Controller Profile","text":"
In order to use the Steam Deck touchscreen as a touchscreen instead of a mouse in Game Mode, you need to enable Touchscreen Native Support for it in controller options (this is done for you in the default chiaki4deck layout chiaki4deck+ mic). For your custom controller profile, do the following:
Edit your controller layout and scroll down to the Action Sets tab (on the left menu).
Click the gear icon to the right of the given action set (i.e., Default).
Select Add Always-On command.
Move to the SYSTEM tab (use R1 to switch tabs) and select Touchscreen Native Support from the commands.
Your Action Sets tab should now look like the following:
Gryo directly maps for games that support it (i.e., Concrete genie, Astro's Playroom, The Last of Us, Ghost of Tsushima, etc.) for the Steam Deck controller (using native interface since SDL doesn't support motion or trackpad controls for Steam virtual controllers) as well as attached controllers that SDL supports with an accelerometer and gyro (i.e., DualSense, DualShock 4, etc.). For this to work, do the following based on your controller:
Steam Deck (works out of the box, nothing needed)
DualSense, DualShock4 or other controller with gyro + accelerometer supported by SDL
disable Steam Input for the controller following Using a DualSense and/or DualShock4 Controller with chiaki4deck below
Additionally, you can use gyro controls for camera options with any game by mapping gyro As joystick and adding a condition for when it's used (i.e., On with a condition of right joystick touch) in the gyro settings for chiaki4deck. I have done this in the default chiaki4deck control setting and you can do it in your custom control scheme. However, when playing games that have native gyro support (such as Concrete Genie or The Last of Us) you will most likely want to change the gyro mapping from As joystick to None so that gyro only maps to gyro in the game (i.e., you don't make your camera move when you're trying to shake your flashlight, etc.).
"},{"location":"setup/controlling/#haptics-and-adaptive-triggers","title":"Haptics and Adaptive Triggers","text":"
PlayStation 5 haptics are mapped for both the DualSense controller (usb connection required) and the Steam Deck controller and adaptive triggers are mapped for the DualSense controller (usb or bluetooth). These need to be explicitly enabled by checking the PS5 features box in the GUI as shown in the picture below:
If you are using a DualSense controller in Game mode on the Steam Deck, you will also need to disable Steam Input for the controller when it's first plugged in following the \"Turning off Steam Input\" tab here. Once checked, haptics and adaptive triggers (DualSense only) will work in games that support them when streaming from a PlayStation 5. If the DualSense is plugged in via USB (either initially or plugged in during a gaming session), haptics will be directed to it. If you are using the Steam Deck and don't have a DualSense plugged in, haptics will be directed to it and played via the trackpads.
Unmute microphone with either Ctrl+M or the mic button on the PlayStation controller. (This is set to L4 in the default chiaki4deck+ mic controller layout.) Then, use the microphone as normal. You can choose your microphone in the Steam Deck settings as well as choosing between audio inputs in the chiaki4deck menu.
Bluetooth headset microphones don't work on Steam Deck by default
The Steam Deck does not currently support microphones over bluetooth by default so you will need to either use a hardwired headset or the Steam Deck microphone unless you change your Steam Deck settings to enable bluetooth headset support (it is currently experimental and turned off by default due to a noticeable drop in audio quality). Thus, it's advised to use either a hardwired headset or the internal microphone. If you really want to use a bluetooth headset and can live with the drop in audio quality see How to enable bluetooth headset modes on Steam Deck.
"},{"location":"setup/controlling/#standard-button-mappings-these-directly-map-and-dont-need-to-be-specifically-set","title":"Standard Button Mappings (These directly map and don't need to be specifically set)","text":"Function Button right joystickright joystickleft joystickleft joystickdpad updpad updpad leftdpad leftdpad downdpad downdpad rightdpad rightstart buttonoption buttontriangleY buttonsquareX buttoncrossA buttoncircleB buttonR1R1R2R2R3R3 (right-stick click) L1L1L2L2L3L3 (left-stick click) stream menuL1+R1+L3+R3"},{"location":"setup/controlling/#using-a-dualsense-andor-dualshock4-controller-with-chiaki4deck","title":"Using a DualSense and/or DualShock4 Controller with chiaki4deck","text":"
While most users will want to just use chiaki4deck with the Steam Deck controller, you can also attach a DualShock 4 or DualSense controller via bluetooth or usbc. The controls will map automatically and there is even native touchpad (including gestures), gyro, haptics (DualSense via usb/usbc only), and adaptive triggers (DualSense only) support. This can be especially useful if you're playing chiaki4deck when connected to a dock using an external monitor or TV or if you just really like the feel of the traditional PlayStation controllers.
Pairing your DualShock 4 / DualSense with Steam Deck via Bluetooth
While holding the Share button, hold the PlayStation Button to put your controller into pairing mode. On the Steam Deck, hit the STEAM button and then select the Settings tab and then the Bluetooth tab (i.e., STEAM button->Settings->Bluetooth). Then, select your device from the list of devices. Once paired, it will automatically connect in the future when you press the PlayStation button on the controller.
"},{"location":"setup/controlling/#enabling-chiaki4deck-to-work-with-dualsense-dualshock-4","title":"Enabling chiaki4deck to Work with DualSense / DualShock 4","text":"
Make Sure your Controller is Connected for Configuration
Your PlayStation controller needs to be connected via bluetooth or usb cable for its tab to show up when you visit the chiaki4deck game page on your Steam Deck and edit the saved controller configuration. This configuration is specifically for your PlayStation controller and separate from the Steam Deck controller configuration for chiaki4deck. It will be activated automatically when you use the PlayStation controller with chiaki4deck (it will show up as a 2nd controller configuration since you will now have at least 2 active controllers [Steam Deck + PlayStation controller])
Turning off Steam Input (Recommended)Mapping All chiaki4deck Controls (Alternative Option)
Turning off Steam Input gets you as close to a native experience with your controller as possible (including the Home button serving as both the Steam and PlayStation button simultaneously).
This is necessary for the following capabilities:
Haptics (DualSense only, must be attached via USB)
Adaptive triggers (DualSense only, USB or bluetooth)
Gyro controls for games like Concrete Genie and Astro's Playroom (any controller SDL supports for gyro + accelerometer)
Won't Have Access to All chiaki4deck controls
With this option you won't have access to all of the shortcuts for chiaki4deck (toggling stretch Ctrl+S and zoom Ctrl+Z screen options and quitting gracefully Ctrl+Q) on your DualSense. However, if you have a keyboard connected to your Steam Deck, you can always use that for those shortcuts.
Turn off Steam Input for your PlayStation controller by doing the following:
Go to the chiaki4deck game page
Select the gamepad icon on the right hand side of the page to go the controller configuration menu
Move to the controller configuration tab for your PlayStation controller (if not already there)
Click the gear icon to the right of Edit Layout
Choose Disable Steam Input from the menu.
This tab shows you how to use Steam Input to map all of the controls for chiaki4deck to your PlayStation controller. This is great if you are using chiaki4deck with a TV. Since the PS Button maps to the STEAM button automatically and there are several commands in the default chiaki4deck configuration bound to back buttons (that don't exist on the PlayStation controllers), I have added these controls to a touch menu. It will show up when touching the left pad of the chiaki4deck controller. You have to click to select one of the extra commands (so you don't accidentally choose one during gameplay) from the radial menu. See the picture below for an example of what this looks like in-game:
No Haptics, Adaptive Triggers, or Gyro
Using Steam Input with your DualSense controller means you won't have access to haptics, adaptive triggers, or gyro controls via your DualSense. If these are important to you, please disable steam input according to the other tab.
The easiest way to configure all of the necessary shortcuts for chiaki4deck on DualSense is to copy the profile I have created in the COMMUNITY LAYOUTS tab with the aforementioned touch menu for extra commands. DualShock 4 can also use a similar layout mapping.
Add Default PlayStation Controller Mapping
Go to the chiaki4deck game page
Select the gamepad icon on the right hand side of the page to go the controller configuration menu
Move to the controller configuration tab for your PlayStation controller (if not already there)
Click the current layout box (it says: Browse Community Layouts for games without official controller support underneath it).
Move to the COMMUNITY LAYOUTS tab and select DualSense by gmoney23
This is what the full mapping looks like for reference:
Map it How you Want
Using Steam Input there are a variety of ways to map controls. Do whatever you like best. Additionally, you can use gyro controls for camera options with games that don't support native gyro by mapping the gyro As joystick. Make sure to set an appropriate condition for when it's used (i.e., when holding R1 or Always On) in the gyro settings for the PlayStation controller configuration option of chiaki4deck. For example, I have done this in the Steam Deck controller chiaki4deck control setting and you can do it for your DualSense control scheme as well. However, when playing games that have native gyro support (such as Concrete Genie or The Last of Us) you will most likely want to either temporarily this option or make sure to set something to enable it that you won't hit accidentally. Otherwise, both the native gyro and the action you map will be done in-game which can make your camera move when you're trying to shake your flashlight, etc.
You can copy from and paste into konsole windows with Ctrl+Shift+C (copy) and Ctrl+Shift+V (paste) instead of the normal Ctrl+C (copy) and Ctrl+V (paste) shortcuts. In fact, Ctrl+C is a shortcut to terminate the current process in the konsole. Additionally, you can still right-click and select copy or paste as per normal.
Using the Discover Store (Recommended)Using the konsole (If for some reason it doesn't show up on the Discover store)
This is a flatpak I created for chiaki4deck from updated Chiaki source code is available on Flathub. This is the recommended install as it is the most straightforward.
However, you can also build the flatpak yourself (recommended for users who want to add their own source code changes on top of the ones I've made) by following the instructions in Building the flatpak yourself.
"},{"location":"setup/remoteconnection/","title":"Set up chiaki4deck to work outside of your home network","text":""},{"location":"setup/remoteconnection/#remote-connection-via-psn","title":"Remote Connection via PSN","text":"
Supports IPV4 ONLY due to PlayStation itself only supporting IPV4 for remote play as of PS5
The remote connection via PSN uses PSN servers as an initial go-between to exchange the necessary information to initiate a direct connection between your client device (i.e., computer, portable gaming device, etc.) and your PlayStation console using a technique called UDP Holepunching. This replicates the behavior of this feature in the official remote play app from Sony.
Why do I need to login to PSN and how is this token used?
The remote connection via PSN requires you to login to PSN to generate an auth token used for contacting the PSN servers that serve as an initial go-between to initiate the direct connection to your PlayStation.
This auth token is stored locally and used to connect with the PSN servers (this can be verified by looking at the code [if you want to be doubly sure] as Chiaki4deck is open source) and not used or stored anywhere outside of that.
Console must be registered locally prior to using remote connection via PSN
To see the remote connection via PSN tab for the given console, the console must not be available locally (otherwise you would want to use a local connection as it is faster and more efficient)
Remote Connection via PSN for PS4 only works with the main registered console for your PSN account (Note: this is a limitation imposed by Sony not a limitation specific to Chiaki4deck)
Not All Networks Supported
Not all network types are supported by UDP holepunching. For some networks, this process will fail and in that case you will have to use a manual remote connection with port forwarding. If you have tried 5 or so times and it has failed consistently with the message Couldn't contact PlayStation over established connection, likely unsupported network type, your network type is currently unsupported. You will need to use the manual instructions. If you are able to connect over the same wireless connection with the official remote play app and are willing to help the Chiaki4deck developers improve Chiaki4deck to support your network type please reach out to the dev team via Reddit or email. If you are failing with Connection over PSN failed closing ..., please either add your logs to an appropriate existing issue or open a new issue on the Chiaki4deck Github.
Go to the Chiaki4deck settings page by hitting the gear icon from the main page
Go to the PSN tab and then click Login to PSN
Login to psn on the provided page
Tips for those having trouble logging into to PSN
If you get a connection to the server timed out message, keep on trying to login by hitting Enter every few seconds until you get a different error message such as Can't connect to the server or you have tried for at least 20 seconds. If that doesn't work, please try refreshing the page and going through the process again. If you still can't find success, make an attempt using a different browser.
Unfortunately, we have no control over Sony's site (that gives out auth tokens to access their PSN servers for the remote connection over PSN setup) so we can only give tips on how best to handle the errors that may occur on the page and wish you the best in obtaining your token. Fortunately, once this token is obtained, Chiaki4deck will automatically refresh it as needed and only ask for you to create a new token in the event that PSN requires you to generate a new one using your login.
Copy your redirect url from the browser
Paste your redirect url on the page and create your token
See success message and close the dialog box
Error Message
If you obtain an error with a link to Sony's oauth site, it is likely the code from the link has expired and you need to create a new code by logging in again and pasting the url into Chiaki4deck. The code usually expires within a few minutes. Otherwise, the error code should hopefully be self explanatory.
Register console (either locally or remotely via a manual connection) if it's not already registered
Switch to non-local internet (otherwise you would want to connect locally instead, so remote connections via PSN for consoles found locally aren't shown)
Click on the box of the console you want to connect to (it will say Remote Connection via PSN)
What if my console doesn't appear
Make sure the console is registered via the standard local registration
Make sure the console doesn't appear on your Chiaki4deck menu (i.e., make sure it's not available locally)
Hit the button to Refresh PSN hosts to query the PSN network again for the console.
Wait for the connection to load
Play
Testing
It may be hard to test if this feature is working properly for you at home (before using it remotely) if you don't have access to another network. In this case, you can use a cellular hotspot to test the connection.
In order to prevent your IP from changing which would break the port forwarding rules if you ever disconnect your PlayStation console from your network and reconnect it (especially if other devices are added to the network in the meantime), you should go into your router settings and reserve an IP address for your PlayStation (DHCP IP reservation / \"static\" IP) or create a hostname for it. For a TP-Link, Netgear, Asus or Linskys router, follow these instructions. If you have a different router, you can search (using a search engine such as DuckDuckGo or Google) for instructions for that specific router using the formula \"dhcp reservation myroutername router\" such as \"dhcp reservation netgear router\" and follow the instructions to reserve an IP for your PlayStation console so that it won't change. Alternatively, if your router has an option to set hostnames for your devices, you can set a hostname for your PlayStation console and use your hostname in the automation instead of a static IP address.
Forward the ports for your console on your router following this port forwarding guide starting with selecting your router
Close out of ads
If any ads appear as you navigate the website just hit the close button on the given advertisement to continue on your journey.
PS5PS4 Port Connection Type 9295 TCP 9296 UDP 9297 UDP 9302 UDP Port Connection Type 987 UDP 9295 TCP 9296 UDP 9297 UDP"},{"location":"setup/remoteconnection/#find-routers-ip","title":"Find Router's IP","text":"
On a computer connected to your router such as your Steam Deck (make sure to disconnect from a vpn first if you're connected to one to get the right IP) use one of the following:
BrowserKonsole/terminal
Visit whatismyip in your browser and copy the displayed IP
Add console to GUI using remote IP as a new manual connection
Click the plus icon in the main menu
Create your remote connection
Enter your remote IP/DNS
Choose the locally registered console you want to remotely connect to
Click Add
Connect using this new connection
The console selected for auto-connect will work with the manual remote connection out of the box for PS5. It will launch using the manual connection if it is discovered and the local connection is not discovered. For PS4, unfortunately, discovery doesn't work for remote connections so you will have to wake it up and start it manually from the menu.
My Remote Connection isn't Working, What Do I do?
If you have gone through the port forwarding and made sure everything is applied correctly and it still doesn't work, it is likely you are behind CGNAT (carrier-grade NAT). This means the router that you would need to forward ports on is owned by the ISP and you can't access it to do so. (Note: There is a protocol called PCP (Port Control Protocol) that allows you to access it but if port forwarding doesn't work that means either your ISP or router doesn't support it.) This means port forwarding won't work. You can try the remote connection via PSN as this can still work given you have a compatible network type. However, is that isn't working either you will need to setup a VPN on your home network to connect. See this site for details on how to do setup a VPN using a raspberry PI with Chiaki4deck (replace Chiaki with Chiaki4deck).
If my connection stops working, what should I do?
If the connection stops working please make sure that the IP address for your router hasn't changed by checking it again via one of the methods above or a different one to make sure it's the same. If it has changed, you will need to update to the new IP address of your router.
"},{"location":"setup/steaming/","title":"Adding Chiaki4Deck to Steam","text":"Automatic Process for Auto-connect or Standard LaunchManual Process for Automation Script
Choose Add Create Steam Shortcut from Main Menu
Fill in name for Steam Shortcut and optional launch options
Fill in name for Steam Shortcut and optional launch options
Launch Options
In most cases, you can leave this blank. One scenario where you would fill this out is if you have multiple users on the same Steam Deck. In this case you can use --profile user1 for one shortcut and --profile user2 for another.
Create Steam Shortcut by hitting Create button
Game (Mode) Time!
You have successfully added chiaki4deck to Steam with pictures and (if on Steam Deck) set the chiaki4deck+ mic Steam Deck controller shortcut.
You can now close any open applications and or terminals (forcing them to close if necessary) and then switch to Game Mode by clicking on the Return to Gaming Mode desktop icon.
Another Non-Steam Game
This is the same process as with other non-Steam games, tailored to the chiaki4deck script and images.
Open the Add a Non-Steam Game prompt
Via user interface / application (GUI)Via konsole
Launch Steam by double clicking on the Steam icon in your desktop or finding it in your apps menu.
Click Add a Non-Steam Game from the Games Menu on the top left of the Steam UI
Run the following command in a konsole window to bring up the Add Non-Steam Game prompt
steam steam://AddNonSteamGame\n
Choose to BROWSE for the game
Show hidden files using the GUI or Ctrl+H (to see the hidden . directories)
Choose Chiaki-launcher.sh as your game
If You're missing Chiaki-launcher.sh, You Skipped the Automation Section
Chiaki-launcher.sh is a script to launch Chiaki without the main gui, resulting in a much better experience on the Steam Deck (click for details) and makes it easier to use the 3 games modes. If Chiaki-launcher.sh is missing, you almost certainly skipped the automation section. Don't worry, the fix is easy! Please complete the Automation section now and come back here afterward. It should take you ~ 5 minutes. Luckily, there is a helper script that does most of the work for you! You simply answer a few questions I walk you through.
Choose File type: All Files at the bottom of the screen
Choose /home/deck from the dropdown at the top of the screen and then navigate by clicking on each folder to the folder /home/deck/.var/app/io.github.streetpea.Chiaki4deck/config/Chiaki
Click on the Chiaki-launcher.sh file in that directory
Click OPEN on the bottom right
Click Add Selected Programs
"},{"location":"setup/steaming/#configuring-name-and-game-icons","title":"Configuring Name and Game Icons","text":"
Steam Application Name Matters!
For Non-Steam games (i.e., chiaki4deck), the Community Layouts controller layouts are based on the name the user set for the game in Steam when they exported it. Thus, in order to find the controller profiles I created for the game in your Community Layouts section later in this guide, your game name will need to the same as mine, (i.e., chiaki4deck). This naming is done in step 4 (below) and it's recommended that you just keep your game name as chiaki4deck to make your life easier.
What if naming chiaki4deck something else fills me with determination...?
If you want to use a different game name (i.e., Playstation Launcher Thingamajig) and want to use some or all of the controller layouts I have created (either directly or to download them and use them as a starting point to tinker from), name your game what you want in step 4. Then, when you get to the controller section, follow Retrieving chiaki4deck Controller Layouts when Using An Alternate Game Name. This walks you through temporarily renaming the app to chiaki4deck to access the controller layouts and save them as Personal Saves to access in the Your Layouts tab. Finally, you can rename you game to what you want and apply your layout to this differently named Steam game.
Acquire pictures to use for the game library in Steam
Get the images I used here for chiaki4deck on my Steam Deck.
Extract the package to a folder of your choice (such as your Documents folder).
How do I extract the images folder?
Double click on the downloaded package in your browser or find the file in your Downloads folder and right-click on it choosing to Extract To and then selecting the folder of your choice (such as your Documents Folder)
Note
This will create a folder named chiaki4deckImages in the folder you choose to extract to
SteamGridDB
The images I provided are from Steam Grid DB and I do not own these images, I'm simply directing you to them for your convenience. You can find these and other images yourself on SteamGridDB as well as via other sources of your choosing.
If it is not already open, launch Steam and go to your game Library.
Right-click on Chiaki-launcher.sh in your Games on the left-hand side and select Properties
In the properties window that comes up rename Chiaki-launcher.sh and add the icon image
Rename it chiaki4deck
Click on the blank square to add an image and navigate to the chiaki4deckImages folder you created in step 1 above and select the icon image (icon-chiaki4deck.png).
Click the x to exit the window
Finished chiaki4deck Properties
Go to your Library in Steam and select chiaki4deck from the left-hand list or one of the Library categories to go to chiaki4deck's game page.
Customize the background and logo for Chiaki4deck
Customize the background
Right-click on the blank space and select Set Custom Background
Browse to the chiaki4deckImages folder you created earlier and select the background image (background-chiaki4deck.png)
Customize the logo
Right-click on the blank space and select Set Custom Logo
Browse to the chiaki4deckImages folder you created earlier and select the logo image (logo-chiaki4deck.png)
Finished chiaki4deck Home Page
Customize the wide capsule and capsule images
Launch chiaki4deck via Steam by hitting the Play button or any other method and then close.
Go to your Library in Steam and scroll to your RECENT GAMES section.
Right-click on the blank picture for chiaki4deck (should be 1st in RECENT GAMES and have a blank image with a landscape orientation) and select Manage->Set custom artwork
Browse to the chiaki4deckImages folder you created earlier and select the wide capsule (wcap) image (wcap-chiaki4deck.png)
Launch a different game and close it (this moves chiaki4deck into the second slot in recent games)
Right-click on the blank picture for chiaki4deck (should be 2nd in recent games and have a blank image with a portrait orientation) and select Manage->Set custom artwork.
Browse to the chiaki4deckImages folder you created earlier and select the capsule (cap) image (cap-chiaki4deck.png)
Game (Mode) Time!
You have successfully added chiaki4deck to Steam with pictures.
You can now close any open applications and or terminals (forcing them to close if necessary) and then switch to Game Mode by clicking on the Return to Gaming Mode desktop icon.
This section covers the updates to Chiaki in chiaki4deck. Information about each release and how to update is in the Releases Section. Updates that are currently done (implemented) are listed in the Done section along with details, while updates that are planned for the future are listed in the Planned section.
Why These Updates?
I started by simply choosing to update things that would give me a better experience with Chiaki on my Steam Deck. I have also begun incorporating suggestions from users of chiaki4deck via chiaki4deck's GitHub issues page (both issues created by GitHub users as well as issues from Reddit users that I created for them in GitHub for tracking). Given the current state of the Chiaki project (maintenance mode), I'm not sure if all of these changes will be accepted upstream. However, so far several changes included here (some by Street Pea and some by Johannes Baiter) have been merged upstream (though are not part of the official flatpak yet since a new release has not been cut). These are marked appropriately in the done section with the relevant footnotes. I will also continue sending patches upstream for my Chiaki updates. I have created chiaki4deck as a means to distribute these changes to others using the Steam Deck as well as others wanting to add additional beneficial features on top of mine. Currently, I am aiming to make chiaki4deck work for all traditional Chiaki users (may not benefit other users as much as Steam Deck users, but wouldn't be bad for those users either).
"},{"location":"updates/done/","title":"Completed (Done) Updates","text":""},{"location":"updates/done/#remote-connection-via-psn","title":"Remote Connection Via PSN","text":"
Enabled remote connection via PSN so users can use this instead of port forwarding on their routers as an option.
"},{"location":"updates/done/#touch-friendly-and-controller-navigable-gui","title":"Touch Friendly and Controller Navigable GUI","text":"
QML based user interface that is better suited for handheld computers such as the Steam Deck and more user-friendly in general.
"},{"location":"updates/done/#hdr-for-steam-deck-oled-in-game-mode","title":"HDR for Steam Deck OLED in game mode","text":"
You can now use HDR with your Steam Deck OLED thanks to Johannes Baiter and David Rosca as well as many patient testers. In order to enable this, you must have:
An HDR-capable streaming device such as the Steam Deck OLED or an OLED monitor attached to an LCD Steam Deck(non-HDR device will still work but use tonemapping instead of outputting HDR)
A PlayStation 5 console (PlayStation 4 doesn't support H265 streaming)
An HDR-capable TV/monitor attached to your Playstation 5 (depending on the connected HDR TV/monitor it may also need to be turned on for the PS5 to output HDR. You can test the PS5 is outputting HDR by going to a game that has HDR settings in the menu such as Cyberpunk 2077 or Ghost of Tsushima and seeing if the game will let you adjust those)
"},{"location":"updates/done/#enabled-touchpad-for-steam-deck-touchscreen-andor-trackpads","title":"Enabled Touchpad for Steam Deck Touchscreen and/or Trackpads","text":"
Added Touchpad support for touchscreens (use outer edges of touchscreen for touchpad click) as well as mouse input (enables trackpads to be fully supported with gestures on touch and touchpad click on click). For an example mapping these in a Steam Deck controller profile, see Default chiaki4deck Layout Touchscreen Mapping and Default chiaki4deck Layout Trackpad Mapping respectively. Downloading the updated chiaki4deck+ controller layout will have these mappings set for your convenience.
"},{"location":"updates/done/#enabled-gyro-for-steam-deck","title":"Enabled Gyro for Steam Deck","text":"
Added gyro support for Steam Deck via a native interface since SDL2 doesn't support Steam Deck gyro due to Steam's virtual gamepads not providing gyro.
"},{"location":"updates/done/#enabled-mic-support","title":"Enabled Mic Support","text":"
You can now attach a microphone and use it to chat online or use in games. There is also noise suppression and echo cancelling for the mic you can configure in the chiaki4deck settings.
Added ability to create a Steam shortcut with the name of your choice and Chiaki4deck artwork and the Steam Deck controller profile from the main menu. This makes setup even easier on Steam Deck.
"},{"location":"updates/done/#enabled-haptics-for-steam-deck-and-dualsense-controller-adaptive-triggers-for-dualsense","title":"Enabled Haptics for Steam Deck and DualSense controller + adaptive Triggers for DualSense","text":"
Haptics enabled for PlayStation 5 thanks to Johannes Baiter. You can use a USB connected DualSense for haptics and adaptive triggers or a bluetooth connected DualSense for just adaptive triggers. To use these features for the DualSense in game mode, please disable Steam Input for the DualSense controller following the \"Turning off Steam Input\" tab in this section.2.
I have also added the capability to play the haptics via the Steam Deck controller using the native interface I added.
You can also use rumble haptics for controllers without integrated haptics or the Steam Deck if the noise of its haptics bothers you.
RGB mapping update thanks to Egoistically via a Chiaki fork which is of course copy-left under the GNU Affero General Public License version 3 as are all of the other chiaki4deck changes. I added the patches to chiaki4deck and it results in a more accurate picture. Joni Bimbashi updated the initial mapping to work with HW acceleration. Below is a BEFORE and AFTER from Ghost of Tsushima.
BEFORE
AFTER
"},{"location":"updates/done/#3-view-modes-for-non-standard-screen-sizes","title":"3 view modes for non-standard screen sizes","text":"
It's great to have these options for Steam Deck's non-standard 1280x800 resolution.3
Using These Options Without the Automation [Not Recommended] (click me to open)
If for some strange reason you want to launch chiaki4deck via the GUI instead of the automation (not recommended due to the items noted here), it launches by default in a window matching the aspect ratio of the stream (i.e., 16:9). This means that the stream output exactly matches the stream window. In this scenario, there is nothing to stretch or zoom the stream output to because the stream output already perfectly matches with the stream window. If you want to stretch or zoom, you would need to first either:
Adjust the window to a bigger or smaller size with your mouse in Desktop Mode (perhaps you want to use chiaki4deck as half of your screen in Desktop mode)
OR
Use fullscreen mode by:
Pressing F11 (either directly in Desktop Mode or via a controller mapping in Game Mode)
OR
Double clicking on the screen in Desktop Mode
Then, you could use stretch and/or zoom accordingly (i.e., Ctrl+S / Ctrl+Z or button mapped to them in game mode).
Normal (default) [used for fullscreen launch option]
Maintains aspect ratio, adds black bars to fill unused parts of screen
Zoom using Ctrl+Z to toggle
Maintains aspect ratio, cutting off edges to fill screen
Stretch using Ctrl+S to toggle
Stretches image (distorting aspect ratio) to fill screen
"},{"location":"updates/done/#quit-function-ctrlq","title":"Quit function Ctrl+Q","text":"
Cleanly quits Chiaki, respecting the user's configuration option of either asking to put PlayStation console sleep, putting PlayStation console to sleep without asking, or leaving PlayStation console on.3
What does this do for me?
Now, if you hit a back button (or other button) mapped to Ctrl+Q on your Steam Deck, your remote play session will shut down cleanly and put your console to sleep automatically if you so choose. This means you no longer have to manually put your console to sleep via a menu or the power button on the PlayStation console itself.
"},{"location":"updates/done/#enabled-automated-launch-and-auto-connect","title":"Enabled Automated Launch and Auto-connect","text":"
This skips the need to visit the configuration screen each time. Use auto-connect if you have one console to choose from and this will work out of the box. Otherwise, you can create an automation script to do this for you. I have added a helper script to generate a Chiaki-launcher.sh script as well as provided complete instructions in the Automation section.
"},{"location":"updates/done/#enabled-touchpad-and-gyro-controls-with-dualsensedualshock-4-controller-for-flatpak","title":"Enabled Touchpad and Gyro Controls with DualSense/DualShock 4 Controller for Flatpak","text":"
This makes it as easy as possible for Steam Deck users to use touchpad and gyro support with their DualSense or DualShock 4 controller. See Using a DualSense and/or DualShock4 Controller with chiaki4deck to set it up for yourself.3 The DualSense/DualShock 4 touchpad and gyro controls work with the binary version of Chiaki but don't work with the official flatpak version. Luckily for you, they now work with the chiaki4deck flatpak!
merged upstream, but not yet released in official flatpak\u00a0\u21a9
partially merged upstream\u00a0\u21a9
now part of upstream Chiaki as of latest release\u00a0\u21a9\u21a9\u21a9
"},{"location":"updates/planned/","title":"Future Updates Planned","text":""},{"location":"updates/releases/","title":"chiaki4deck Releases","text":""},{"location":"updates/releases/#moving-to-flathub","title":"Moving to FlatHub","text":"
Legacy Repo Deprecation
Chiaki4deck is now on flathub. If you previously installed chiaki4deck via the konsole the flatpak has changed to io.github.streetpea.Chiaki4deck. The old repo is now deprecated in favor of using Flathub since Flathub is added by default to the Steam Deck and the hosting is at no cost to the project (unlike the initial repo). While the software will still be accessible from the old repo, it is encouraged for users to switch over.
To migrate to the flathub repo do the following:
Move chiaki4deck's configuration files to their new location
Adds multiplier to accelerometer values to match acceleration values of lighter DualSense/DualShock 4 controller. Fixes issue in some games where the acceleration value wasn't high enough when moving/shaking the Steam Deck to trigger the in-game action.
Noise suppression and echo cancelling for mic configurable in the chiaki4deck menu
Why doesn't my bluetooth headset mic show up as an available microphone on Steam Deck?
The Steam Deck does not currently support microphones over bluetooth by default so you will need to either use a hardwired headset or the Steam Deck microphone unless you change your Steam Deck settings to enable bluetooth headset support (it is currently experimental and turned off by default due to a noticeable drop in audio quality). Thus, it's advised to use either a hardwired headset or the internal microphone. If you really want to use a bluetooth headset and can live with the drop in audio quality see How to enable bluetooth headset modes on Steam Deck.
"},{"location":"updates/releases/#update-actions-for-existing-users","title":"Update Actions for Existing Users","text":"
Updating chiaki4deck
[Optional] Switch to the new default control layout chiaki4deck+ mic which adds toggle mic mute to L4. Alternatively, you can manually add toggle mic mute to a button of your choice by mapping Ctrl+M to that button.
Haptics support for DualSense (via USB) and Steam Deck [experimental]
Adaptive triggers with DualSense (via USB or Bluetooth)
Automation script tweaks (allow using hostname and specifying external IP / hostname in addition to local one)
Documentation Updates (new DIY sections on building docs + development builds on Steam Deck + document various 1.3.0 features and changes for new and existing users)
Bug fixes (audio bug causing crash in base Chiaki fixed, mismatch between cli and automation script leading and lagging space handling fixed, etc.)
"},{"location":"updates/releases/#update-actions-for-existing-users_1","title":"Update Actions for Existing Users","text":"
Updating chiaki4deck
[Optional] Enable the experimental PlayStation 5 features (enables PlayStation 5 haptics for Steam Deck and DualSense [via USB] and adaptive triggers for DualSense [via USB or bluetooth]).
Check the box shown in the image below in the GUI.
[If you are using a DualSense] Turn off Steam Input for the DualSense following the \"Turning off Steam Input\" tab in this section.
[Optional] Add an external IP/hostname to the automation by revisiting (running back through) the Automation section. Doing this will make the automation use your external address if you aren't connected to your home wireless network.
Note
This is for those that have gone through the process to make a connection outside of their local network to get an external IP/hostname to use.
"},{"location":"updates/releases/#what-you-need-to-do-to-update","title":"What You Need to Do to Update","text":"
Updating chiaki4deck
Updating your controller config to the new default (chiaki4deck+) and/or updating your custom controller layouts to take advantage of native touchscreen / trackpad controls. See the Controller Options section for details.
Using the Default Controller Profile (Recommended Starting Point):
Open the chiaki4deck Controller Options section, browsing the COMMUNITY LAYOUTS tab for the chiaki4deck+ config, downloading it, and setting it as your new layout.
[Approximate Time Estimate: 1 minute]
Creating a Custom Controller Profile (Great for tinkering, especially for updating the default profile to meet your needs exactly):
Make a custom controller profile using the Creating Your Own Controller Profile section, taking special note of the Special Button Mappings and Using Steam Deck Controller Touchscreen in Your Custom Controller Profile
[Approximate Time Estimate: 10-20 minutes depending on your experience with Steam Deck Controller Layouts]
[OPTIONAL] If you have a PlayStation Login Passcode and want entering it to be automated, please revisit (run back through) the Automation section (don't need to revisit any of the other sections). This is really quick if you use the \"Automated Instructions (Recommended)\" Tab. [Approximate Time Estimate: 5 minutes]
Success
Once your script is updated, since it will be in the same location as before, the Game Mode and controller setup will automatically carry over to this updated automation script. Thus, after revisiting the Automation section, you can immediately go back to using chiaki4deck.
"},{"location":"updates/releases/#what-you-get-by-updating","title":"What you Get by Updating","text":"
Full mapping for the PlayStation touchpad to the Steam Deck's touchscreen and trackpad (you can use either or switch between them if you so choose). See the touchscreen and trackpad mapping subsections of the Controller Options section for details.
General Touchscreen and Mouse Support
This update adds general touchscreen and mouse support for the PlayStation touchpad. Thus, it's applicable beyond the Steam Deck. With regard to chiaki4deck, the Steam Deck is the focus / inspiration for the update.
Updated RGB color mapping used in OpenGL widget to be more color accurate thanks to Egoistically's Chiaki fork. See Updated RGB Mapping for details and a before and after comparison in Ghost of Tsushima.
Automatic Login Passcode Entry (For Users with a Login Passcode)
If you have to enter a login passcode each time you turn on your PlayStation console and login, you can now enter it into the automation to login from your personal Steam Deck without the hassle of bringing up the virtual keyboard with Steam ++X and entering it in each time.
"},{"location":"updates/releases/#what-you-need-to-do-to-update_1","title":"What You Need to Do to Update","text":"
Updating chiaki4deck
Revisiting (running back through) the Automation section (don't need to revisit any of the other sections). This is really quick if you use the \"Automated Instructions (Recommended)\" Tab.
Success
Once your script is updated, since it will be in the same location as before, the Game Mode and controller setup will automatically carry over to this updated automation script. Thus, after revisiting the Automation section, you can immediately go back to using chiaki4deck.
[If desired] Visit the Using a DualSense and/or DualShock4 Controller with chiaki4deck to see how to setup native touchpad and gyro controls when playing chiaki4deck with the DualShock4 and DualSense controllers.
"},{"location":"updates/releases/#what-you-get-by-updating_1","title":"What you Get by Updating","text":"
PlayStation controller native touchpad + gyro controller support enabled for the flatpak with setup instructions in Using a DualSense and/or DualShock4 Controller with chiaki4deck. This is great for when your using a TV or monitor with your Steam Deck.
Enhanced automated launch
Specifically, I upgraded the discovery cli command to work properly and updated the automation script (and accompanying generator script) to to take advantage of this command instead of ping to handle some cases that failed intermittently before.
Now, the automation works for edge cases such as:
user is remote playing from outside their home wireless network (given they've already done the networking setup for that)
console is in the process of going to sleep or coming online when remote play session launched
console is currently downloading a large game
user doesn't have ping enabled on his/her wireless network
chiaki4deck's initial release including the following notable updates:
3 view modes for non-standard screen sizes
Quit function Ctrl+Q
Enabled Automated Launch
"}]}
\ No newline at end of file
+{"config":{"lang":["en"],"separator":"[\\s\\-]+","pipeline":["stopWordFilter"]},"docs":[{"location":"","title":"PlayStation Remote Play on Steam Deck","text":"
Site Purpose
This site serves as a guide to enable you to have the best experience with PlayStation Remote Play on the Steam Deck. Currently, it employs an updated Chiaki package with Steam Deck enhancements I have dubbed chiaki4deck. I have created the accompanying chiaki4deck flatpak as a means to provide updates to Chiaki for Steam Deck users. I am contributing the updates upstream to the main Chiaki project with the hope that they are added despite it currently being in maintenance mode.
Start by visiting the Setup section and following each of the subsections to learn how to setup Chiaki for the best experience on your Steam Deck using chiaki4deck.
Chiaki is a \"Free and Open Source PlayStation Remote Play Client\" licensed under the GNU Affero General Public License version 3 (AGPL V3). This license enables anyone to share and modify the source code to add additional features on the condition that they make those publicly available (copy-left) and also license them under the same AGPL V3 license. This package currently has an official flatpak on flathub which you can install on the Steam Deck.
chiaki4deck aims to provide tips and tricks on using Chiaki with the Steam Deck. In the spirit of Chiaki being open source, I have made changes to the Chiaki project to optimize the experience on my Steam Deck and am sharing how to access and use those enhancements on this site. Furthermore, I have submitted a patch to bring the first set of completed updates to the \"official\" Chiaki repo. Additionally, I plan to submit future updates as patches and hope they will be added despite the Chiaki project being in maintenance mode. If they are added, all of the chiaki4deck documentation here will also apply to the official Chiaki flatpak.
What is the chiaki4deck flatpak?
I have provided a flatpak with my updates named chiaki4deck (to distinguish it from the official Chiaki release to avoid confusion if users have both installed) as a solution for users that want an easy way to use these improvements on their Steam Deck. For installation instructions, see the Installation section
For users that want to build from source, I have also provided the updated source code on the accompanying GitHub repo (the link to the GitHub is on the top right [top left menu on mobile] of the site banner you see if you scroll to the top of any page). Instructions for this are in the DIY section. As it stands, a lot of the documentation applies to the general Chiaki flatpak in addition to the chiaki4deck flatpak, but instructions are specifically tailored to chiaki4deck and the updates included therein. To use this documentation with the Chiaki flatpak replace io.github.streetpea.Chiaki4deck with re.chiaki.Chiaki where applicable and note that the features listed in the Updates section will not work with that version (they only work with chiaki4deck until the main Chiaki flatpak gets an update.)
If you want to update the documentation to add helpful information of your own, you can scroll to the top of the page you want to edit and click the paper with pencil icon on the top right (to the right of the current page's title). This will enable you to make edits and submit them for approval. If you have more detailed edits or a new contribution, you can build the documentation locally and see the changes rendered as you make and save them by following the Building the Documentation Yourself section.
"},{"location":"#making-suggestions-for-improvements-to-the-documentation","title":"Making Suggestions for Improvements to the Documentation","text":"
Please submit general issues to the chiaki4deck GitHub as well as specific issues related to a given page by clicking the underneath \"Was this page helpful?\" and opening the feedback form for the page you think needs updating.
"},{"location":"diy/builddocs/","title":"Building the Documentation Yourself","text":"
For Documentation Contributors Only
This is for people who want to update the documentation of chiaki4deck and see the updates locally or if you are a regular user and are curious on how to do it. In most cases, just accessing the documentation via the site https://streetpea.github.io/chiaki4deck/ is best. If you want to access the documentation without internet access, instead of following this documentation, you should navigate to the print page (which displays the documentation in printable format). Then, Print->Save to pdf in your web browser and access the PDF freely offline.
Change into the source code directory in your terminal
Serve the documentation in a terminal while in your source code directory with:
mkdocs serve\n
Open a web browser and access the documentation
The above mkdocs serve command should output an address to access the documentation which by default is: http://127.0.0.1:8000 which is over localhost (only accessible locally). Go to this address to access the documentation.
Documentation updates automatically
If you leave the terminal tab where you ran mkdocs serve open, the docs will update automatically when your save your changes to the file. This way as you make changes you can check your changes at the given web site, displaying in the same way as it will when displayed as a static website on GitHub.
Make edits to the relevant markdown files in the docs/ subfolder, and watch the changes display in realtime in your web browser when you save your file updates.
Special Documentation Features
To use the special features of mkdocs-material and the plugins used in these docs that enhance the documentation from traditional markdown, please take a look at the syntax for the various features. You can find examples of them in action in the markdown of this site by either:
Inspecting a given page of the site in your web browser
scroll to the top of a page with a feature you want to see how to use
click the page with an eye icon to the right of the title
Inspect the markdown for the part of the page with the given feature
OR
See the markdown for the entire site in the docs/ subfolder of the GitHub project, navigating the markdown files for each page
Additionally, you can find more examples and explainers on the mkdocs-material reference page.
"},{"location":"diy/buildit/","title":"Building the Flatpak Yourself","text":"
For Advanced Users Only
This is for advanced users who are comfortable going through the build process themselves, such as those who want to build on top of the changes I have made. For regular users, please install using the Installation Section.
Steam OS is a read-only filesystem so you will need to temporarily disable this to install flatpak-builder. Additionally, keep in mind that your installed packages may get wiped during a system update and need to be reinstalled following this process again in the future.
"},{"location":"diy/buildit/#building-the-flatpak","title":"Building the Flatpak","text":""},{"location":"diy/buildit/#get-flatpak-dependencies","title":"Get Flatpak Dependencies","text":"
Install the necessary flatpak runtime, associated sdk, and base app.
"},{"location":"diy/buildit/#create-gpg-key-for-signing-your-builds-and-repositories","title":"Create gpg Key for Signing your Builds and Repositories","text":"
Create the gpg key pair
gpg --quick-gen-key chiaki4deck-diy\n
Export public key (private key stays on your machine in your gpg directory) [~/.gnupg by default].
This build process is compiling first the dependencies and then Chiaki itself with the updates included in chiaki4deck. This will take a long while (read: 15+ minutes depending on the resources of the build system itself) the first time it runs. However, since flatpak caches builds, if you make changes to just the chiaki4deck repo code and then run a new build, it will import the dependencies from cache and only start building from scratch when it detects the first change in the stack. This results in subsequent builds going much faster than the first build you make.
Update static deltas (makes upgrading require less downloaded data for end-users)
"},{"location":"diy/steamdeckdev/","title":"Developing chiaki4deck updates on Steam Deck","text":"
This is for contributors that want to make/test updates to the codebase without building a new flatpak each time.
Adding Dependencies
If you want to add new dependencies that aren't already included in the flatpak modules or SDK, then you will need to create a new flatpak build adding that module or install the module locally and it to your PATH. However, this would only be needed in rare circumstances.
Clone that branch or pull it into the git repo cloned above
"},{"location":"diy/steamdeckdev/#creating-and-debugging-builds-without-new-flatpak-build","title":"Creating and Debugging Builds without New Flatpak Build","text":"
Enter the development version of the flatpak with the chiaki4deck source code mounted with:
flatpak run --command=bash --devel io.github.streetpea.Chiaki4deck-devel\n
Create a build using cmake as per usual
Debug buildRelease build
Change into the git directory for your cloned project
Make a directory for your debug build
mkdir Debug\n
Change into debug directory
cd Debug\n
Create build files with cmake
cmake -DCMAKE_BUILD_TYPE=Debug ..\n
Build chiaki4deck
make\n
Change into the git directory you mounted
Make a directory for your debug build
mkdir Release\n
Change into debug directory
cd Release\n
Create build files with cmake
cmake -DCMAKE_BUILD_TYPE=Release ..\n
Build chiaki4deck
make\n
Run build as usual from executables (using gdb for debugging Debug build)
DebugRelease
From Debug directory using gdb:
gdb ./gui/chiaki\n
From Release directory:
./gui/chiaki\n
Set vaapi to none
When running chiaki from within the flatpak like this please set vaapi to none as otherwise the video won't work. This is fine since you are just running Chiaki like this for development tests only so worse performance isn't a big concern.
Make edits to the source code to implement your changes
Editing code on Steam Deck
Personally, I use vscode which you can install as a flatpak from Discover. You can open your chiaki code directory using vscode from your Steam Deck desktop and save changes. Then, these changes which will be reflected in your flatpak (since you mounted the chiaki code directory to your flatpak in the steps above) when you do a new build in your flatpak environment. The process would be similar with other code editors installed on your Steam Deck.
After making changes to the source code, simply rebuild with make as per usual
"},{"location":"diy/steamdeckdev/#debug-coredump-from-a-flatpak","title":"Debug Coredump From a flatpak","text":"
Get process from coredump
Run coredumpctl
coredumpctl\n
Get pid for your application from list
Open gdb session for your flatpak with the given pid
flatpak-coredumpctl -m given_pid flatpak_name\n
Example given pid 4822 and flatpak name io.github.streetpea.Chiaki4deck-devel
For a comprehensive guide on gdb commands see Debugging with GDB
"},{"location":"setup/","title":"Set Up Remote Play on Steam Deck","text":"
This section covers how to set up PlayStation Remote Play (using Chiaki) on Steam Deck. It covers installing the chiaki4deck package, configuring an automatic (scripted) launch, and adding chiaki4deck to Game Mode with icons and a custom controller configuration to boot. Please switch into Desktop Mode for this process.
Open This Documentation on Your Steam Deck for Easy Copy/Pasting
If you open this documentation in a web browser on your Steam Deck (such as using the Firefox flatpak), you can easily copy and paste commands by clicking the copy icon to the right of each command (appears when hovering over the right end of a code box):
and pasting with Ctrl+V or right-click->paste in regular windows and Ctrl+Shift+V or right-click->paste in konsole windows.
Switching into Desktop Mode
Hit the Steam button on your Steam Deck
Navigate to the Power section on the menu
Choose Switch to Desktop
Navigating Desktop Mode
This install requires entering into Desktop Mode. Please connect the following to your Steam Deck:
Highly RecommendedOptional but Recommended if you Have Available
external keyboard (You can use Steam + X to bring up and use the virtual keyboard and make liberal use of copy/paste if you really need to, but it is a much worse experience)
external mouse (can use the touchpad/trackpads on the device instead)
external monitor (can use the native Steam Deck screen instead)
Use the Auto Connect Feature Instead if it Meets Your Needs
Now that you have chiaki4deck configured, it's time to make it wake up your PlayStation and connect to it automatically. Note: If you only have 1 console please try the autoconnect feature. Otherwise, proceed with this guide to setup a script to automatically launch your different systems.
Sleep Mode Required
For this to work, your PlayStation needs to either be in rest/sleep mode or on (so that it is listening for the wake up signal). This means you will want to keep your PlayStation in rest/sleep mode when you are not playing (instead of off).
Open a konsole session (launch it via Applications by clicking the Steam icon in the bottom left and searching for it in the All Applications section)
Get your PlayStation IP
Get your registered PlayStation's IP Address
Launch Chiaki via your desktop or via:
flatpak run io.github.streetpea.Chiaki4deck\n
Get your IP address via the console widget and then close the window and return to the konsole session
Prevent IP From Changing
In order to prevent your IP from changing (which would make the script stop working) if you ever disconnect your PlayStation console from your network and reconnect it (especially if other devices are added to the network in the meantime), you should go into your router settings and reserve an IP address for your PlayStation (DHCP IP reservation / \"static\" IP) or create a hostname for it. For a TP-Link, Netgear, Asus or Linskys router, follow these instructions. If you have a different router, you can search (using a search engine such as DuckDuckGo or Google) for instructions for that specific router using the formula \"dhcp reservation myroutername router\" such as \"dhcp reservation netgear router\" and follow the instructions to reserve an IP for your PlayStation console so that it won't change. Alternatively, if your router has an option to set hostnames for your devices, you can set a hostname for your PlayStation console and use your hostname in the automation instead of a static IP address.
Create script for waking PlayStation and launching Chiaki
Automated Instructions (Recommended)Manual Instructions (For People who like to do things by hand)
Run the gen-launcher script using the following command in your konsole and answer the prompts (you will need your IP address from step 2 above)
What Do the Different Modes (i.e., fullscreen [uses Normal], zoom, stretch) Look Like?
To see examples of the different launch modes, visit the Updates section
Connecting Outside of Your Local Network
You can add an external IP or hostname in addition to your local one to connect from an external network. To do so, you need to set up port forwarding as detailed in the prior remote connection section. Then, you can choose to setup an external IP/hostname as part of the setup script process. The automation will take your home network name (SSID) to check if you are home or not to use the correct IP/hostname automatically. The script will automatically detect your current SSID. Thus, if you are on your home network while running the setup script (gen-launcher.sh), it will detect your home ssid so you will just need to hit Enter. If not, you can enter ot manually (instead of using the default of your Steam Deck's current network's SSID). You can get your home SSID for manual entry via iwgetid -r from the konsole when connected to your home network or by looking in your network history on your Steam Deck (it will be the connection name for your home network such as StreetPea-5G). Of course, if you want to skip this now and setup the external address later, you can always rerun the automation or choose a placeholder external IP now and manually edit it to your desired IP/hostname later.
Example Output [click to expand me]
bash <(curl -sLo- https://raw.githubusercontent.com/streetpea/chiaki4deck/main/scripts/gen-launcher.sh)\n\n1) PlayStation 4\n2) PlayStation 5\nPlease select the number corresponding to your Playstation Console: 2\nOption 2: PlayStation 5 was chosen\n\n\n\n\nHOME ADDRESS\n-------------\n1) IP\n2) hostname\nNOTICE: Use 1 unless you created a hostname (FQDN) for your PlayStation\nPlease select the number corresponding to your address type: 1\nOption 1: IP was chosen\n\nEnter your PlayStation IP (should be xxx.xxx.xxx.xxx like 192.168.1.16):\n192.168.1.16\n\nDo you have a separate address (DNS or IP) to access this console away from home? (y/n):\ny\nEnter your home SSID [hit enter for default: StreetPea-5G]: \n\n\n\nAWAY ADDRESS\n-------------\n1) IP\n2) hostname\nNOTICE: Use 1 unless you created a hostname (FQDN) for your PlayStation\nPlease select the number corresponding to your address type: 2\nOption 2: hostname was chosen\n\nEnter your PlayStation FQDN (hostname) (should be abc.ident like foo.bar.com):\nfoo.bar.com\n\n1) fullscreen\n2) zoom\n3) stretch\nPlease select the number corresponding to the default mode you want to use: 3\nOption 3: stretch was chosen\n\nDo you have a PlayStation Login Passcode? (y/n):\ny\nEnter your 4 digit PlayStation Login Passcode:\n1111\n\nWould you like to test the newly created script? (y/n):\ny\nsounds good, launching script now...\n[I] Logging to file /home/deck/.var/app/io.github.streetpea.Chiaki4deck/data/Chiaki/Chiaki/log/chiaki_session_2023-01-06_08-33-49-583583.log\n[I] Chiaki Version 2.1.1\n[I] Using hardware decoder \"vaapi\"\nDevice Found\ntype: 28de 1205\npath: /dev/hidraw3\nserial_number: \nManufacturer: Valve Software\nProduct: Steam Deck Controller\nRelease: 200\nInterface: 2\nUsage (page): 0x1 (0xffff)\n\n[I] Connected Steam Deck ... gyro online\n\n\n[I] Controller 0 opened: \"Microsoft X-Box 360 pad 0 (030079f6de280000ff11000001000000)\"\n[I] Starting session request for PS5\n[I] Trying to request session from 192.168.1.16:9295\n[I] Connected to 192.168.1.16:9295\n[I] Sending session request\n[I] OpenGL initialized with version \"4.6 (Core Profile) Mesa 22.2.4 (git-80df10f902)\"\n[I] Session request successful\n[I] Starting ctrl\n[I] Ctrl connected to 192.168.1.16:9295\n[I] Sending ctrl request\n[I] Ctrl received http header as response\n[I] Ctrl received ctrl request http response\n[I] Ctrl got Server Type: 2\n[I] Ctrl connected\n[I] Ctrl received Login PIN request\n[I] Ctrl requested Login PIN\n[I] Session received entered Login PIN, forwarding to Ctrl\n[I] Ctrl received entered Login PIN, sending to console\n[I] Steam Deck Haptics Audio opened with 2 channels @ 3000 Hz with 150 samples per audio analysis.\n[I] Ctrl received Login message: success\n[I] Ctrl received valid Session Id: 1673022831TZLW3NGFZP76ZLUPAOHZBA64PQQ2AF6LXUET2OFDTKAJF4XVGUAXOMOQDXBVVCAS\n[I] Starting Senkusha\n[I] Enabling DualSense features\n[I] Takion connecting (version 7)\n[I] Takion enabled Don't Fragment Bit\n[I] Takion sent init\n[I] Takion received init ack with remote tag 0xb18ccf, outbound streams: 0x64, inbound streams: 0x64\n[W] Received Ctrl Message with unknown type 0x16\n[W] offset 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef\n[W] 0 01 ff .. [I] Takion sent cookie\n[I] Takion received cookie ack\n[I] Takion connected\n[I] Senkusha sending big\n[I] Senkusha successfully received bang\n[I] Senkusha Ping Test with count 10 starting\n[I] Senkusha enabled echo\n[I] Senkusha sending Ping 0 of test index 0\n[I] Senkusha received Pong, RTT = 3.019 ms\n[I] Senkusha sending Ping 1 of test index 0\n[I] Senkusha received Pong, RTT = 2.841 ms\n[I] Senkusha sending Ping 2 of test index 0\n[I] Senkusha received Pong, RTT = 3.460 ms\n[I] Senkusha sending Ping 3 of test index 0\n[I] Senkusha received Pong, RTT = 2.504 ms\n[I] Senkusha sending Ping 4 of test index 0\n[I] Senkusha received Pong, RTT = 3.030 ms\n[I] Senkusha sending Ping 5 of test index 0\n[I] Senkusha received Pong, RTT = 2.778 ms\n[I] Senkusha sending Ping 6 of test index 0\n[I] Senkusha received Pong, RTT = 3.131 ms\n[I] Senkusha sending Ping 7 of test index 0\n[I] Senkusha received Pong, RTT = 2.795 ms\n[I] Senkusha sending Ping 8 of test index 0\n[I] Senkusha received Pong, RTT = 2.992 ms\n[I] Senkusha sending Ping 9 of test index 0\n[I] Senkusha received Pong, RTT = 3.064 ms\n[I] Senkusha disabled echo\n[I] Senkusha determined average RTT = 2.961 ms\n[I] Senkusha starting MTU in test with min 576, max 1454, retries 3, timeout 14 ms\n[I] Senkusha MTU request 1454 (min 576, max 1454), id 1, attempt 0\n[I] Senkusha MTU 1454 success\n[I] Senkusha determined inbound MTU 1454\n[I] Senkusha starting MTU out test with min 576, max 1454, retries 3, timeout 14 ms\n[I] Senkusha sent initial client MTU command\n[I] Senkusha received expected Client MTU Command\n[I] Senkusha MTU 1454 out ping attempt 0\n[I] Senkusha MTU ping 1454 success\n[I] Senkusha determined outbound MTU 1454\n[I] Senkusha sending final Client MTU Command\n[I] Senkusha is disconnecting\n[I] Senkusha closed takion\n[I] Senkusha completed successfully\n[I] Takion connecting (version 12)\n[I] Takion sent init\n[I] Takion received init ack with remote tag 0x7033129, outbound streams: 0x64, inbound streams: 0x64\n[I] Takion sent cookie\n[I] Takion received cookie ack\n[I] Takion connected\n[I] StreamConnection sending big\n[I] BANG received\n[I] StreamConnection successfully received bang\n[I] Crypt has become available. Re-checking MACs of 0 packets\n[W] Received Ctrl Message with unknown type 0x41\n[W] offset 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef\n[W] 0 00 00 00 00 02 01 00 00 ........ [D] StreamConnection received audio header:\n[D] offset 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef\n[D] 0 02 10 00 00 bb 80 00 00 01 e0 00 00 00 01 .............. [I] Audio Header:\n[I] channels = 2\n[I] bits = 16\n[I] rate = 48000\n[I] frame size = 480\n[I] unknown = 1\n[I] ChiakiOpusDecoder initialized\n[I] Audio Device alsa_output.pci-0000_04_00.1.hdmi-stereo-extra2 opened with 2 channels @ 48000 Hz, buffer size 19200\n[I] Video Profiles:\n[I] 0: 1920x1080\n[I] StreamConnection successfully received streaminfo\n[I] Switched to profile 0, resolution: 1920x1080\n[I] StreamConnection is disconnecting\n[I] StreamConnection sending Disconnect\n[I] StreamConnection was requested to stop\n[I] StreamConnection closed takion\n[I] StreamConnection completed successfully\n[I] Ctrl requested to stop\n[I] Ctrl stopped\n[I] Session has quit\n .__ .__ __ .__ _____ .___ __ \n____ | |__ |__|____ | | _|__| / | | __| _/____ ____ | | __\n_/ ___\\| | \\| \\__ \\ | |/ / |/ | |_/ __ |/ __ \\_/ ___\\| |/ /\n\\ \\___| Y \\ |/ __ \\| <| / ^ / /_/ \\ ___/\\ \\___| < \\___ >___| /__(____ /__|_ \\__\\____ |\\____ |\\___ >\\___ >__|_ \\\n\\/ \\/ \\/ \\/ |__| \\/ \\/ \\/ \\/\n.__ __ .___._.\n______ ___________|__|______/ |_ ____ __| _/| |\n/ ___// ___\\_ __ \\ \\____ \\ __\\/ __ \\ / __ | | |\n\\___ \\ \\___| | \\/ | |_> > | \\ ___// /_/ | \\|\n/____ >\\___ >__| |__| __/|__| \\___ >____ | __\n \\/ \\/ |__| \\/ \\/ \\/\n
Get your console nickname
It was the nickname listed with your console in the console widget. It can also be obtained with
flatpak run io.github.streetpea.Chiaki4deck list\n
Example Output
Host: PS5-012\n
In this example, the console nickname is PS5-012, please use your nickname. If you have multiple, choose the one from the list you want and choose the corresponding regist_key in the next step (i.e., if you pick the console on the 2nd line here, pick the regist_key on the 2nd line in the next step).
This command is printing the Chiaki configuration file generated when you ran chiaki4deck for the first time. This is where the flatpak version of Chiaki saves your settings and details. In fact, all flatpaks store their details with the ~/.var/app/app_id pattern. If you want to look at the file itself and get the value you can open the file at /home/deck/.var/app/io.github.streetpea.Chiaki4deck/config/Chiaki/Chiaki.conf and look for the remote play registration key [rp_regist_key].
Choose your default launch option (fullscreen, zoom, or stretch)
fullscreen: A full screen picture with black bars, aspect ratio maintained
zoom: A full screen zoomed picture with no black bars, aspect ratio maintained, edges of image cut off by zoom
stretch: A full screen stretched picture with no black bars, aspect ratio slightly distorted by vertical [in the case of Steam Deck] stretch
Default Launch Option
This is the option remote play will launch with. You can always toggle to a different option by using the Ctrl+S (toggles between stretch and normal) and Ctrl+Z (toggles between zoom and normal) options which should be set if desired in the Steam controller configuration for the game. See Controller Configuration Section for more details.
Get your 4 digit PlayStation login passcode (if applicable). You will know your PlayStation login passcode if you have one because you have to enter it every time you log onto your PlayStation console. If you don't have to do this, you don't have a PlayStation login passcode and will leave that field blank.
Create a new blank file located in the folder /home/deck/.var/app/io.github.streetpea.Chiaki4deck/config/Chiaki named Chiaki-launcher.sh
Open the /home/deck/.var/app/io.github.streetpea.Chiaki4deck/config/Chiaki/Chiaki-launcher.sh file in your favorite editor and save the following output.
#!/usr/bin/env bash\n\nconnect_error_loc()\n{\necho \"Error: Couldn't connect to your PlayStation console from your local address!\" >&2\necho \"Error: Please check that your Steam Deck and PlayStation are on the same network\" >&2\necho \"Error: ...and that you have the right PlayStation IP address or hostname!\" >&2\nexit 1\n}\n\nconnect_error_ext()\n{\necho \"Error: Couldn't connect to your PlayStation console from your external address!\" >&2\necho \"Error: Please check that you have forwarded the necessary ports on your router\" >&2\necho \"Error: ...and that you have the right external PlayStation IP address or hostname!\" >&2\nexit 1\n}\n\nwakeup_error()\n{\necho \"Error: Couldn't wake up PlayStation console from sleep!\" >&2\necho \"Error: Please make sure you are using a PlayStation 5.\" >&2\necho \"Error: If not, change the wakeup call to use the number of your PlayStation console\" >&2\nexit 2\n}\n\ntimeout_error()\n{\necho \"Error: PlayStation console didn't become ready in 35 seconds!\" >&2\necho \"Error: Please change 35 to a higher number in your script if this persists.\" >&2\nexit 1\n}\nif [ \"$(iwgetid -r)\" == \"<local_ssid>\" ]\nthen\naddr=\"<local_addr>\"\nlocal=true\nelse\naddr=\"<external_addr>\"\nlocal=false\nfi\nSECONDS=0\n# Wait for console to be in sleep/rest mode or on (otherwise console isn't available)\nps_status=\"$(flatpak run io.github.streetpea.Chiaki4deck discover -h ${addr} 2>/dev/null)\"\nwhile ! echo \"${ps_status}\" | grep -q 'ready\\|standby'\ndo\nif [ ${SECONDS} -gt 35 ]\nthen\nif [ \"${local}\" = true ]\nthen\nconnect_error_loc\n else\nconnect_error_ext\n fi\nfi\nsleep 1\nps_status=\"$(flatpak run io.github.streetpea.Chiaki4deck discover -h ${addr} 2>/dev/null)\"\ndone\n\n# Wake up console from sleep/rest mode if not already awake\nif ! echo \"${ps_status}\" | grep -q ready\nthen\nflatpak run io.github.streetpea.Chiaki4deck wakeup -<playstation_console> -h ${addr} -r '<remote_play_registration_key>' 2>/dev/null\nfi\n\n# Wait for PlayStation to report ready status, exit script on error if it never happens.\nwhile ! echo \"${ps_status}\" | grep -q ready\ndo\nif [ ${SECONDS} -gt 35 ]\nthen\nif echo \"${ps_status}\" | grep -q standby\n then\nwakeup_error\n else\ntimeout_error\n fi\nfi\nsleep 1\nps_status=\"$(flatpak run io.github.streetpea.Chiaki4deck discover -h ${addr} 2>/dev/null)\"\ndone\n\n# Begin playing PlayStation remote play via Chiaki on your Steam Deck :)\nflatpak run io.github.streetpea.Chiaki4deck --passcode <login_passcode> --<launch_option> stream '<console_nickname>' ${addr}\n
Edit the /home/deck/.var/app/io.github.streetpea.Chiaki4deck/config/Chiaki/Chiaki-launcher.sh file, replacing the following values for your values:
<local_ssid> local network name found with:
Via konsoleVia GUI
iwgetid -r\n
Must Be Currently Connected to Local Network
You must be connected to your current local network for this konsole method to work. Otherwise, it will give you the network you are currently connected to or nothing (if you're not currently connected to a network). If you're not connected to your home network you can view your SSID via the GUI using the Via GUI tab.
The connection name/SSID for your home network in Steam Deck network settings such as StreetPea-5G.
<local_addr> with local PlayStation IP
<external_addr> with external IP or hostname.
Filling this in Later
You can use your local PlayStation IP or something like foo.bar.com as a placeholder if haven't set up an external IP/hostname yet. Then, if you decide to set up an external connection, you can manually substitute the \"real\" external IP/hostname.
<console_nickname>
Beware of '
If you have any ' in your nickname itself, such as Street Pea's PS5, you will need enter the ' as '\\''. Thus, for Street Pea's PS5 instead of using Street Pea's PS5 you would use Street Pea'\\''s PS5. All other characters are fine. This is due to the PlayStation console allowing any manner of names (including non-valid hostnames with all manner of special characters) and Chiaki using that name in its configuration file.
<remote_play_registration_key>
<launch_option>
<playstation_console> (either 4 or 5)
<login_passcode> (just erase this field if you don't have a login passcode)
Example Script with \"fake\" values [yours will be different]
#!/usr/bin/env bash\n\nconnect_error_loc()\n{\necho \"Error: Couldn't connect to your PlayStation console from your local address!\" >&2\necho \"Error: Please check that your Steam Deck and PlayStation are on the same network\" >&2\necho \"Error: ...and that you have the right PlayStation IP address or hostname!\" >&2\nexit 1\n}\n\nconnect_error_ext()\n{\necho \"Error: Couldn't connect to your PlayStation console from your external address!\" >&2\necho \"Error: Please check that you have forwarded the necessary ports on your router\" >&2\necho \"Error: ...and that you have the right external PlayStation IP address or hostname!\" >&2\nexit 1\n}\n\nwakeup_error()\n{\necho \"Error: Couldn't wake up PlayStation console from sleep!\" >&2\necho \"Error: Please make sure you are using a PlayStation 5.\" >&2\necho \"Error: If not, change the wakeup call to use the number of your PlayStation console\" >&2\nexit 2\n}\n\ntimeout_error()\n{\necho \"Error: PlayStation console didn't become ready in 35 seconds!\" >&2\necho \"Error: Please change 35 to a higher number in your script if this persists.\" >&2\nexit 1\n}\nif [ \"$(iwgetid -r)\" == \"StreetPea-5G\" ]\nthen\naddr=\"192.168.1.16\"\nlocal=true\nelse\naddr=\"foo.bar.com\"\nlocal=false\nfi\nSECONDS=0\n# Wait for console to be in sleep/rest mode or on (otherwise console isn't available)\nps_status=\"$(flatpak run io.github.streetpea.Chiaki4deck discover -h ${addr} 2>/dev/null)\"\nwhile ! echo \"${ps_status}\" | grep -q 'ready\\|standby'\ndo\nif [ ${SECONDS} -gt 35 ]\nthen\nif [ \"${local}\" = true ]\nthen\nconnect_error_loc\n else\nconnect_error_ext\n fi\nfi\nsleep 1\nps_status=\"$(flatpak run io.github.streetpea.Chiaki4deck discover -h ${addr} 2>/dev/null)\"\ndone\n\n# Wake up console from sleep/rest mode if not already awake\nif ! echo \"${ps_status}\" | grep -q ready\nthen\nflatpak run io.github.streetpea.Chiaki4deck wakeup -5 -h ${addr} -r '2ebf539d' 2>/dev/null\nfi\n\n# Wait for PlayStation to report ready status, exit script on error if it never happens.\nwhile ! echo \"${ps_status}\" | grep -q ready\ndo\nif [ ${SECONDS} -gt 35 ]\nthen\nif echo \"${ps_status}\" | grep -q standby\n then\nwakeup_error\n else\ntimeout_error\n fi\nfi\nsleep 1\nps_status=\"$(flatpak run io.github.streetpea.Chiaki4deck discover -h ${addr} 2>/dev/null)\"\ndone\n\n# Begin playing PlayStation remote play via Chiaki on your Steam Deck :)\nflatpak run io.github.streetpea.Chiaki4deck --passcode --zoom stream 'PS5-012' ${addr}\n
Example is Without Login Passcode #
If you have a passcode you would set it like --passcode 1111, changing the last line of the example above to flatpak run io.github.streetpea.Chiaki4deck --passcode 1111 --zoom stream 'PS5-012' 192.168.1.16
Chiaki launched in your desired screen mode on your Steam Deck! Congratulations!
You are no longer on the happy path
Script fails before launching stream windowError in stream window
Check the error message and fix issues if obvious. Otherwise, things to check:
Make sure your PlayStation console is in either rest/sleep mode or on (otherwise this won't work)
Double check the values you entered in the script to make sure they are correct.
Open your script at: /home/deck/.var/app/io.github.streetpea.Chiaki4deck/config/Chiaki/Chiaki-launcher.sh and try to run each command individually to see what's causing your problem.
If issues persist with this and chiaki4deck launches fine regularly via the application link, just not the automation, feel free to reach out. If you think the documentation itself needs to be updated click the underneath \"Was this page helpful?\" and open the feedback form for this page. If you just need help, you can reach me via Reddit or email
Close chiaki4deck gracefully by closing any open dialog boxes and then using Ctrl+Q on the stream window. If chiaki4deck doesn't close gracefully, move your mouse to the top left corner of the stream window and a blue circle should highlight the corner of the screen. Click on it to see all of your windows and select the konsole window. Then, close the konsole window itself (click its x icon in the top right corner). Next, you can relaunch the script again to make sure it wasn't a one-time snafu. Note: Chiaki seems to perform better (audio/visual quality) in Game Mode vs. Desktop Mode for me. If issues persist, feel free to reach out via Reddit or email. If you think the documentation itself needs to be updated click the underneath \"Was this page helpful?\" and open the feedback form for this page.
"},{"location":"setup/configuration/","title":"Configuring chiaki4deck","text":""},{"location":"setup/configuration/#registering-your-playstation","title":"Registering your PlayStation","text":"Upgrading from Using Chiaki Flatpak on Steam DeckNew to Using Chiaki on Steam Deck
Make sure you're on the right tab!
If you haven't set up the Chiaki flatpak on Steam Deck, please switch to the New to Using Chiaki on Steam Deck Tab. If you have set up the official Chiaki flatpak before (no, you don't have to uninstall Chiaki ) and want to try chiaki4deck, you're in the right place!
Create initial file templates for chiaki4deck
Open chiaki4deck by clicking the Steam icon in the bottom left and searching for it in the Games section via the graphical user interface (GUI) or by entering flatpak run io.github.streetpea.Chiaki4deck in the konsole.
What if chiaki4deck doesn't appear in the Games section?
If chiaki4deck doesn't appear in the Games section, go to All Applications and search for chiaki4deck there. It should show up in the Games section, but I've noticed that sometimes it only shows up in its appropriate section after a restart. Going to All Applications works in all cases.
Close chiaki4deck
Copy your configuration file from the Chiaki flatpak with the following konsole command
Open chiaki4deck again and you should see your registered console and settings from Chiaki now copied to chiaki4deck.
What Did I Just Do?
You just replaced the config file (flatpak stores config files for each app in ~/.var/app/appid/config where appid is your app's appid) for chiaki4deck (which doesn't have your details yet) with the one for Chiaki (which you already went through the registration process and configured settings for) so that you don't have to go back through the same process with chiaki4deck and can start using it as quickly as possible.
Set up your PlayStation console for remote play
Enable remote play
PS5PS4
Go to Settings -> System -> Remote Play and turn on:
Enable Remote Play
Go to Settings -> Remote Play Connection Settings and turn on:
Enable Remote Play
Go to Settings -> Account Management -> Activate as Your Primary PS4 and select:
Activate
Enable waking your console from rest mode
PS5PS4
Go to Settings -> System -> Power Saving -> Features Available in Rest Mode and turn on:
Stay Connected to the Internet
Enable Turning on PS5 from Network
Go to Settings -> Power Save Settings -> Set Function Available in Rest Mode and turn on:
Stay Connected to the Internet
Enable turning on PS4 from Network
Get your PlayStation AccountID (This is needed to access your ps account)
Using Gui (Linux and MacOS only)Using konsole (Flatpak only)Using public website
Wait until step 5 below when you are registering your console, hit the PSN Login button and login to your PlayStation account on the window that opens.
Run the flatpak with the psn-account-id command
flatpak run --command=psn-account-id io.github.streetpea.Chiaki4deck\n
Follow the prompts, opening a browser and logging in with your PlayStation network account details when prompted.
Copy the Account-ID you receive and store it in a safe place. This is the Account-ID used for remote play that is associated with your PlayStation online account username and password.
Change your PSN privacy settings to allow anyone to find you in your search
Go to psn.flipscreen.games
Enter your Account ID
Copy your encoded id for Chiaki
Open chiaki4deck (click the Steam icon in the bottom left and search for it in the Games section via GUI or flatpak run io.github.streetpea.Chiaki4deck via konsole) and your PlayStation system should be automatically discovered.
What if my PlayStation Console isn't Appearing?
Make sure your Steam Deck is on the same wireless network as your PlayStation system and that the PlayStation console is either on or in sleep/rest mode. If this doesn't work, you can always try restarting your Steam Deck and connecting to the network again. If it still doesn't work you can try the Manual Registration step in step 5 below.
Double click on the blue box to bring up a registration window
Choose your console type
Enter your PSN Account-ID obtained in step 1 above (if not automatically copied).
Get a registration code for remote play
PS5PS4
Go to Settings -> System -> Remote Play -> Link Device
Go to Settings -> Remote Play -> Add Device
Enter the code from your device in the PIN field
Click Register (will become available when all necessary fields are filled)
Click the gear icon in the top right to go to Settings
Click the consoles tab
Click the blue Register New button to bring up a registration window
Enter your PlayStation's ip address in the Host section replacing 255.255.255.255
You can obtain your PlayStation's ip address by going in your PlayStation console's settings and going to:
PS5PS4
System->System Software->Console Information and looking at the IPV4 Address
Network->View Connection Status and looking at the IP Address.
Choose your console type
Enter your PSN Account-ID obtained in step 1 above (if not automatically copied).
Get a registration code for remote play
PS5PS4
Go to Settings -> System -> Remote Play -> Link Device
Go to Settings -> Remote Play -> Add Device
Enter the code from your device in the PIN field
Click Register (will become available when all necessary fields are filled)
You should see this upon successful registration
Click out of the dialog boxes and see that your console now shows registered
"},{"location":"setup/configuration/#testing-your-connection","title":"Testing your Connection","text":"
Test waking your console from rest mode
Put your console in rest mode
Open chiaki4deck
Double click on the box with the console icon colored orange (State: standby).
When prompted with, \"The Console is currently in standby mode.Should we send a Wakeup packet instead of trying to connect immediately?\":
choose Yes
Your PlayStation console should wake up and the box with the console icon should turn from orange to blue (State: ready).
Your PlayStation has awoken from slumber! Your PlayStation hit the snooze button
Success
Now it's time to test connecting via PlayStation Remote Play in the next step!
Here's how to get back on the happy path
Make sure your PlayStation shows as registered and is currently in sleep mode. If it's not in sleep mode, you can't wake it up.
Make sure that you have enabled turning on your PlayStation console from rest mode:
PS5PS4
Go to Settings -> System -> Power Saving -> Features Available in Rest Mode and turn on:
Stay Connected to the Internet
Enable Turning on PS5 from Network
Go to Settings -> Power Save Settings -> Set Function Available in Rest Mode and turn on:
Stay Connected to the Internet
Enable turning on PS4 from Network
Test PlayStation Remote Play
Double click on the box with the now blue console icon (State: ready)
Test launching a game if you want
Exit out of the window once you've tested the connection.
It worked! It didn't work
Purrfect
You were able to launch your stream and connect. Maybe, you even got a game running.
An error occurred
Please try closing and re-launching to make sure it wasn't some sort of temporary snafu (maybe your console was updating something and didn't want to let you connect right away).
Make sure your PlayStation appears in the Chiaki menu, is labelled (registered) and is animated with either an orange (State: standby) or blue (State: ready) light.
"},{"location":"setup/configuration/#choosing-your-remote-play-settings","title":"Choosing your Remote Play Settings","text":"
Here are different settings you can use for Chiaki/chiaki4deck depending on your network connection. The default configuration is for remote play on a home network only. This means that it is dependent only on the performance / strength of your wireless router (or ethernet connection) [recommended to connect the PlayStation console via ethernet and Steam Deck via wi-fi to optimize performance and portability] and not on your Internet (World Wide Web) connection.
What does that mean for me?
If you are in an area with bad Internet, as long as you have a good wireless router, you can get close to native performance.
Open chiaki4deck and click the gear icon in the top right to open the settings menu
Adjust the settings to your preferences.
General Settings
Enabling Experimental PlayStation 5 Features (PS5 Users Only)
If you want to enable haptics for Steam Deck and DualSense (must be attached via USB) and adaptive triggers for DualSense (USB or bluetooth), check the box that the red arrow is pointing to in the image above. This is opt-in now since these features are currently experimental. Additionally, for the DualSense controller to work with these features in game mode, please disable Steam Input for the DualSense controller following the \"Turning off Steam Input\" tab in this section.
Use Buttons by Position Instead of by Label
This enables the option to use the face buttons of your controller by position (i.e., NSEW) as opposed to by their label (i.e., ABXY). This enables you to use a Nintendo-style controller and still be able to use the buttons in the same positions as on a PlayStation controller instead of the swapped Nintendo controller positions.
Use Steam Deck in Vertical Orientation
For Steam Deck, this enables the option to use the Steam Deck in vertical orientation in games that assume a horizontal controller for motion controls. Since most PlayStation games assume a horizontal facing controller, (even though data is sent for using the controller in any orientation) most games only work if the Steam Deck is horizontal (like you would hold a DualSense/DualShock 4 controller). This option enables you to play those games in vertical mode by allowing you to use roll instead of yaw and having a vertical orientation correspond to a horizontal facing controller. Some games, such as Astro's playroom use the orientation values and enable you to use the controller in various different positions (i.e. this option isn't needed for using the controller in vertical orientation for that small subset of games).
Putting your PlayStation Console to Sleep Automatically
For Action on Disconnect, choose Ask (the default) to get prompted (use the touchscreen to respond to prompt window) about putting your PlayStation to sleep when you close your session with Ctrl+Q (you will add this shortcut as part of you controller configuration in controller section).
If you prefer, you can also use Enter Sleep Mode to automatically put your PlayStation console to sleep as soon as you close your session with Ctrl+Q
Audio/WiFi Settings
Video Settings
Stream Settings
(choose the PS5 HDR tab if you have a PS5 connected to a HDR TV/monitor (see HDR section below for more details), PS5 if you have a PS5 not connected to an HDR TV/monitor, and PS4 if you have a PS4). If you are having issues with your PS5 connection, please try switching to 720P following with its default bitrate of 10,000 with your PS5 since that requires significantly less bandwidth from your wireless router.
PS5 HDRPS5PS4
Stream output with HDR. This are the recommended PS5 settings for a device that supports HDR such as the Steam Deck OLED.
Why 1080p if the Steam Deck is only 800p?
Using 1080p results in a better picture for me than 720p. The biggest factor in this seems to be chroma-sub sampling. In simple terms, the colors for an image are compressed and so you get a much lower resolution of color data than your image resolution. This means a 1080p image (with a high bitrate) will have more color data than a 720p image even if the image resolution itself ends up being 720p (since the color resolution will be higher than the equivalent 720p picture's color resolution). This results in an image that has more pop to it. Thus, I recommend streaming at 1080p if you have the bandwidth (good enough wireless router).
However, if you are having issues with your wireless connection (i.e choppy audio, flashes in your video, or lag) while playing, then please use 720p instead. The gains you get from 1080p are nice, but aren't worth having a bad connection.
These are the recommended PS5 settings for a device that doesn't support HDR like the ROG Ally.
Why 1080p if the Steam Deck is only 800p?
Using 1080p results in a better picture for me than 720p. The biggest factor in this seems to be chroma-sub sampling. In simple terms, the colors for an image are compressed and so you get a much lower resolution of color data than your image resolution. This means a 1080p image (with a high bitrate) will have more color data than a 720p image even if the image resolution itself ends up being 720p (since the color resolution will be higher than the equivalent 720p picture's color resolution). This results in an image that has more pop to it. Thus, I recommend streaming at 1080p if you have the bandwidth (good enough wireless router).
However, if you are having issues with your wireless connection (i.e choppy audio, flashes in your video, or lag) while playing, then please use 720p instead. The gains you get from 1080p are nice, but aren't worth having a bad connection.
This is the recommended setting for a PS4. If you have a PS4 pro you can use 1080P instead.
HDR is now supported when you select the H265 HDR (PS5 only) codec option. For HDR to work you need to:
Use an HDR device such as the Steam Deck OLED or an OLED monitor attached to an LCD Steam Deck for streaming (non-HDR device will still work but use tonemapping instead of outputting HDR)
How do I know when HDR is active on my Steam Deck?
You can see when HDR is active by hitting the quick access button (3 dots button on the bottom right of the Steam Deck) going to the gear icon and looking at BRIGHTNESS. When HDR is active there will be a purple/blue banner to the right of the BRIGHTNESS label.
Connect your PS5 to a device such as an HDR TV or monitor (depending on the connected HDR TV/monitor it may also need to be turned on for the PS5 to output HDR)
How do I know if the PS5 is outputting HDR?
You can test the PS5 is outputting HDR by going to a game that has HDR settings in the menu such as Cyberpunk 2077 or Ghost of Tsushima and seeing if the game will let you adjust those.
Enable HDR in your PS5 settings (need to be connected directly to your PS5 and not via remote play to access this menu) by going to Settings -> Screen and Video -> Video Output -> HDR and selecting either Always On or On When Supported.
Select H265 HDR (PS5 only) as your codec option in chiaki4deck
Launch chiaki4deck via gamescope (i.e., game mode on the Steam Deck)
Adjusting PS5 HDR for Steam Deck
You can adjust the PS5 HDR settings for optimal viewing on the Steam Deck via the system-wide PS5 settings (need to be connected directly to your PS5 and not via remote play to access this menu) by going to Settings -> Screen and Video -> Video Output -> Adjust HDR. You'll want to do this if your display brightness (i.e., nits) is different from the Steam Deck OLED's 1000 nits. According to the folks over at HDTVTest (via arshiatn) for an 1000 nits display you want to use 15-15-0 for the HDR settings. To set this in the Adjust HDR set move 15 steps (15 presses of the right key on the dpad of the PlayStation controller) for the first test screen, 15 steps from the beginning for the 2nd test screen and 0 steps from the beginning on the last test screen.
Please note that this will also affect the settings for your connected display so if you are switching between remote play and TV play often keep that in mind. Certain games also have their own HDR settings you can adjust while remote playing in their respective game menus or when beginning the game.
If you have one console you want to connect to remotely or locally you can use the auto-connect feature to launch it automatically on launch. If you have multiple consoles to launch into you can instead use the automation section.
"},{"location":"setup/configuration/#performance-of-chiakichiaki4deck","title":"Performance of Chiaki/chiaki4deck","text":""},{"location":"setup/configuration/#my-experience","title":"My Experience","text":"
Ultimately, the performance will depend on the capability of your wireless router and which system (\\(PS5 > PS4 Pro > PS4\\)) you are using. Here are some notes from my experience using chiaki4deck on my Steam Deck with a PS5 console and a relatively good (\\(450 Mbps\\) for \\(2.4GHz\\) / \\(1,300 Mbps\\) for \\(5GHz\\)) wireless router.
My Wireless Connection by the Numbers
I'm using the \\(5GHz\\) band for chiaki4deck on my Steam Deck, meaning the total bandwidth for all devices on my local network is \\(1,300 Mbps\\) (remember Internet connection itself doesn't matter since we're only using our wireless router for local streaming). Since I am using the settings in Choosing Your Remote Play Settings, I'm using \\(30,000 Kbps\\) or \\(30 Mbps\\) out of the total of \\(1,300 Mbps\\). This means I'm using about \\(2\\%\\) of my \\(5GHz\\) band. In other words, I still have plenty of bandwidth for watching Netflix while I play on my Steam Deck!
What Performance Can I Expect?
I am currently getting close to native performance using chiaki4deck on my Steam Deck with my PS5. This gives me better performance than I get playing performance heavy games directly on Steam Deck (like that one game where the kid gets bit by a )
Benefits:
5-6 hours of battery life (vs 1-2 hours playing the same games natively on Steam Deck)
access to PlayStation collection (games I have already purchased or have via PS Plus) including exclusives
no fan noise when playing
PlayStation Trophies
Negatives:
occasional performance issues with certain games (specifically games with VSync enabled)
Games I've Played Successfully Using chiaki4deck So Far...
Stray
God of War (2018)
Genshin Impact (turned off VSync in settings to get rid of white flashes during gameplay)
Sekiro (occasional white flashes in areas with high crowds. Luckily, these went away as I got further in the game and never affected my ability to progress. Unfortunately, this seems to be due to VSync being enabled automatically with no option to turn it off. It only affected about 3 hours of the game in total [12 flashes with 1 or 2 every 15-30 minutes or so] before it went away completely).
Fall Guys
MultiVersus
Red Dead Redemption 2
Marvel's Spider Man
Ghost of Tsushima (changed from Resolution Mode to Performance Mode in game settings for native-like performance)
If you are not using the settings listed in Choosing Your Remote Play Settings, try with those settings and see if that fixes it for you. The biggest of these is using a HW Decoder option for your system which should help significantly.
If you are on Steam Deck OLED and you are using the Steam Deck after waking up from sleep, please trying turning the wifi off and then back on in the Steam Deck settings and see if this improves your performance (this is likely due to a WiFi driver issue with the Steam Deck OLED on certain networks so can't be fixed by Chiaki4deck)
Switch to 720p from 1080p
720p requires less bandwidth than 1080p. This will help if your wireless connection is the problem, especially since it's very easy to do. This can fix video artifacts (white / green flashes) and audio choppiness (both results of connection problems).
Try short preamble
If you are still having trouble (I didn\u2019t need this but it can help in general and helped significantly improve performance for other streaming services such as Game Pass on my Steam Deck), try using using short preamble instead of long preamble in your router settings. You need to change this directly in your router settings for the given network and can do it per network if you set up more than one. This is incompatible with old devices (using wifi b/g instead of n or ac). Devices from 2011 and newer are required by law to support it and so will definitely work. Older devices may or may not support it depending on if they have either n or ac wireless support. Short preamble helps the \\(5GHz\\) connection for devices that support it (essentially anything that\u2019s connecting on a \\(5GHz\\) network should use it). For streaming, you can set up one network that uses short for your newer devices (\\(5GHz\\) network for me) and one with long for older devices (\\(2.4 GHz\\) network for me since older devices don\u2019t support \\(5GHz\\) anyway). My connection worked fine with long preamble on a \\(2.4 GHz\\) network for Chiaki but short (and a \\(5GHz\\) network for that matter) works better in general for devices that support it and has helped others using Chiaki as well as me to help reduce Game Pass streaming lag (which is still much worse than Chiaki and not close to native, but works well for games that don\u2019t require fast or moderately fast reaction times).
For specific game issues, change game resolution settings
For example, the game may be set to 4k / resolution mode even though it's only streaming at 1080p or even 720p. Additionally, it may be using HDR (which the Steam Deck screen doesn't support). Switching these settings off on a game level results in less processing power used on the game and thus more left over for streaming as well as hitting a higher framerate. For example, I switched Ghost of Tsushima from resolution mode to performance mode and noticed that the occasional performance problems I was experiencing evaporated and the visual quality became much more stable due to the lack of occasional stutters. It went from being playable but a noticeable downgrade to indistinguishable from native.
Turn off VSync or the equivalent in games that use it
VSync should only be enabled on the client side while streaming and having it enabled in the game itself can cause issues since it requires some extra overhead and can't actually sync with your screen if you're streaming the game. This resulted in issues with white flashes for me while playing Genshin Impact and Sekiro. When I turned off VSync in the Genshin Impact settings, these flashes (which had happened multiple times a minute with VSync on) disappeared. This affects only a small number of games, but is something to watch out for if you randomly have an issue with one game while others run well with Chiaki/chiaki4deck.
Switch framerate to 30fps
30fps requires less bandwidth than 60fps. This will help if your wireless connection is the problem, especially since it's very easy to do. This can fix video artifacts (white / green flashes) and audio choppiness (both results of connection problems). I put this last because it is the biggest performance downgrade and most of the time you don't need to do this. However, switching to 30fps / 720p at the default settings is the most surefire way to fix connection issues and a last resort if the methods with virtually no downsides don't do the trick.
"},{"location":"setup/configuration/#chiakichiaki4deck-via-internet-outside-of-home-connection","title":"Chiaki/chiaki4deck via Internet (Outside of Home Connection)","text":"
Chiaki/chiaki4deck Outside of your Home Network
You can also either the remote connection via PSN or open up ports to connect from the Internet, but the performance will not be as good, with increased input lag being the most noticeable downgrade. In this scenario, your connection will depend on both the Internet connection of your PlayStation console via the router and the Internet connection of your computer via your location (internet speeds themselves will apply). The farther away (more hops from your router) you get, the worse the performance will get. If you are still in the same state, it will likely still be relatively good. However, if you go cross-country or something like that, it can degrade significantly. Nevertheless, it can be very convenient to use while traveling, especially when playing less timing intensive games (i.e., games that would play well via cloud streaming). Setup is covered in the remote connection section.
If you created the Steam Shortcut through the menu, it automatically adds the correct chiaki4deck+ mic controller profile for you on Steam Deck.
Get all of the shortcuts mapped to Steam Deck controls. Start by going to the chiaki4deck game menu and selecting the controller layout to configure controller options.
Game ModeDesktop Mode "},{"location":"setup/controlling/#retrieving-chiaki4deck-controller-layouts-when-using-an-alternate-game-name-most-users-can-skip-this","title":"Retrieving chiaki4deck Controller Layouts when Using An Alternate Game Name [Most Users Can Skip This]","text":"Only If You Didn't Use chiaki4deck As the Name of the Game in Steam [Click to Open Me]
Change the name of your game (i.e., Playstation Launcher Thingamajig) temporarily to chiaki4deck
Open the properties menu of Playstation Launcher Thingamajig (whatever you called it) by hitting the options button when selecting the game or the gear icon on the game page and selecting Properties... from the menu that pops up.
Change the game name to chiaki4deck
Get the controller layout from the COMMUNITY LAYOUTS via the normal process.
Click the current layout box (it says: Browse Community Layouts for games without official controller support underneath it).
Move to the COMMUNITY LAYOUTS tab and select chiaki4deck+ mic by gmoney23
Export the layout as a Personal Save
Click the gear icon and select Export Layout as the option
Save the layout as a New Personal Save
Change your game name to whatever you would like
Go back into the properties menu for the game
Change your game name back to what you wanted
Choose the desired layout which is now available for your differently named game
Click on your current layout
Select the saved community layout from the YOUR LAYOUTS tab
Play with the layout
Getting Steam Controls for Non-Steam Games
An interesting aside is that you can exploit this same process to get the official controller layout for a game that has a Steam version but you added as a non-Steam game. In that instance, you would be changing the game name to the Steam App ID for that game which you can find by searching SteamDB here among other ways (i.e., looking at the # in the URL of the game on the Steam Store).
The easiest way to configure all of the necessary shortcuts for chiaki4deck is to copy the profile I have created in the COMMUNITY LAYOUTS tab.
Click the current layout box (it says: Browse Community Layouts for games without official controller support underneath it).
Move to the COMMUNITY LAYOUTS tab and select chiaki4deck+ mic by gmoney23 (the chiaki4deck+ layout was from before the toggle mic mute button mapping to the L4 back button was added and the original chiaki4deck layout was from before touchpad mapping to the trackpad and touchscreen was added)
"},{"location":"setup/controlling/#default-chiaki4deck-layout-mapping-full-view","title":"Default chiaki4deck Layout Mapping Full View","text":""},{"location":"setup/controlling/#default-chiaki4deck-layout-touchscreen-mapping","title":"Default chiaki4deck Layout Touchscreen Mapping","text":"
Use native gestures and swiping the touchscreen to perform touchpad actions. Please keep in mind that the touchscreen is mapping to the PlayStation touchpad (that is what the PlayStation console / games expect) so it behaves like a touchpad (i.e., cursor position moves based on your gesture relative to the current cursor position instead of snapping to your finger location). This is important to note for games with a cursor such as Chicory: A Colorful Tale as it can seem weird when using a touchscreen but is actually correct / desired in this case.
Use the edges of the touchscreen (top, bottom, left, or right 5% of the screen) to activate touch click.
Games with Region-Based Touchpad Click
For games that separate the PlayStation touchpad into 3 regions, you can use a left edge touchscreen tap for left touchpad click, right edge touchscreen tap for right touchpad click and top or bottom middle of the touchscreen tap for middle touchpad click.
I have mapped the left trackpad as the PlayStation button and the right trackpad as the PlayStation controller touchpad (press for touchpad click and swipe for touchpad gestures). This essentially works the exact same way as when you're playing with the DualSense of DualShock4 touchpad. You touch/swipe for gestures and click for touchpad click.
The touchpad gestures are mapped using a mouse region with left mouse click on touch (i.e., simulates holding down the Left Button while moving a mouse) and the touchpad click is mapped to T.
Right Click Works too
Clicking the mouse Right Button instead of the T key would have the same effect.
"},{"location":"setup/controlling/#default-chiaki4deck-layout-back-button-mapping","title":"Default chiaki4deck Layout Back Button Mapping","text":"
I have mapped L4 to toggle mic mute, L5 to end session (Ctrl+Q), R4 to zoom (Ctrl+Z), and R5 to stretch (Ctrl+S).
I have also mapped gyro controls As joystick. Whenever you touch the right joystick, you can move the Steam Deck to aim / control the right stick (usually mapped to camera control) with motion (gyro) controls. You can use this on its own or for small adjustments to larger camera movements made by directly moving the right joystick. You can always change this by choosing to edit the layout and going into the gyro settings.
Native Gyro for Steam Deck
Gyro is also directly mapped under the hood for the Steam Deck controller. Thus, when you play a game that has native gyro controls, those will work without needing to do anything in your control mapping via Steam Input. When you are playing a game with native gyro support, you may want to change the gyro mapping from As joystick to None so that gyro only maps to gyro in the game (i.e., you don't move the camera while trying to move a paintbrush using native gyro).
Of course, you could leave the right stick mapping on (so that it maps to both gyro and right joystick), if that is truly what you want.
"},{"location":"setup/controlling/#creating-your-own-controller-profile","title":"Creating your Own Controller Profile","text":"
You can create your own controller profile by mapping the relevant buttons. The special button mappings (functions not assigned to the controller by default) [set these] and the standard button mappings (controls that directly map and are thus assigned by default) [no need to set these unless you prefer different mappings] are listed in tables below for your convenience.
"},{"location":"setup/controlling/#special-button-mappings-you-need-to-assign-these-yourself","title":"Special Button Mappings (You need to assign these yourself)","text":"Function Button Description Quit Ctrl+Q Close chiaki4deck cleanly, putting console in sleep mode if desired Zoom Ctrl+Z Toggle between zoom (zoomed in to eliminate borders, cutting off edge of screen) and non-zoom (black borders) Stretch Ctrl+S Toggle between stretch (stretched to eliminate borders, distorting aspect ratio of image), and non-stretch (black borders with default aspect ratio) PlayStation Button Esc The PlayStation / home button as it normally functions on a PlayStation controller Share Button F The Share button on the PS5 controller used for taking screenshots, videos, etc. stored on your PS5 and uploaded to the PlayStation app on your phone if you so choose. Touchpad Click T, mouse Right Button, tapping border (top, bottom, left or right 5%) of the touchscreen These actions will all result in a touchpad click. For games that separate the touchpad into multiple regions, they work in conjunction with either the current mouse location (location of finger on Steam Deck trackpad) or current finger location (which edge of the touchscreen you tapped) to delineate which region you are using (most games just have one region for touchpad click though). Touchpad MotionTouchscreen touch, mouse Left Button + Mouse Movement (i.e., drag action / mouse region touch). Maps to the PlayStation touchpad (since that's what PlayStation games / the remote streaming console expect). This means that the \"cursor\" (if one is defined for the game like in Chicory: A Colorful Tale) moves according to your gestures but does not snap/follow your fingers' locations (i.e., it behaves like a touchpad as it should). Toggle Mic Mute Ctrl+M The toggle microphone mute on and off button on the PlayStation controller. Stream Menu Ctrl+O This brings up a stream menu which shows things like your current Mbps.
Two Button Shortcuts
If you want to create a shortcut that includes 2 buttons like Ctrl+Q, add the first key (i.e., Ctrl) and then click the gear icon to the right of the added command (i.e., Ctrl) and select Add sub command. Finally, fill in the new blank rectangle that appears with the desired second key (i.e., Q)
"},{"location":"setup/controlling/#using-steam-deck-controller-touchscreen-in-your-custom-controller-profile","title":"Using Steam Deck Controller Touchscreen in Your Custom Controller Profile","text":"
In order to use the Steam Deck touchscreen as a touchscreen instead of a mouse in Game Mode, you need to enable Touchscreen Native Support for it in controller options (this is done for you in the default chiaki4deck layout chiaki4deck+ mic). For your custom controller profile, do the following:
Edit your controller layout and scroll down to the Action Sets tab (on the left menu).
Click the gear icon to the right of the given action set (i.e., Default).
Select Add Always-On command.
Move to the SYSTEM tab (use R1 to switch tabs) and select Touchscreen Native Support from the commands.
Your Action Sets tab should now look like the following:
Gryo directly maps for games that support it (i.e., Concrete genie, Astro's Playroom, The Last of Us, Ghost of Tsushima, etc.) for the Steam Deck controller (using native interface since SDL doesn't support motion or trackpad controls for Steam virtual controllers) as well as attached controllers that SDL supports with an accelerometer and gyro (i.e., DualSense, DualShock 4, etc.). For this to work, do the following based on your controller:
Steam Deck (works out of the box, nothing needed)
DualSense, DualShock4 or other controller with gyro + accelerometer supported by SDL
disable Steam Input for the controller following Using a DualSense and/or DualShock4 Controller with chiaki4deck below
Additionally, you can use gyro controls for camera options with any game by mapping gyro As joystick and adding a condition for when it's used (i.e., On with a condition of right joystick touch) in the gyro settings for chiaki4deck. I have done this in the default chiaki4deck control setting and you can do it in your custom control scheme. However, when playing games that have native gyro support (such as Concrete Genie or The Last of Us) you will most likely want to change the gyro mapping from As joystick to None so that gyro only maps to gyro in the game (i.e., you don't make your camera move when you're trying to shake your flashlight, etc.).
"},{"location":"setup/controlling/#haptics-and-adaptive-triggers","title":"Haptics and Adaptive Triggers","text":"
PlayStation 5 haptics are mapped for both the DualSense controller (usb connection required) and the Steam Deck controller and adaptive triggers are mapped for the DualSense controller (usb or bluetooth). These need to be explicitly enabled by checking the PS5 features box in the GUI as shown in the picture below:
If you are using a DualSense controller in Game mode on the Steam Deck, you will also need to disable Steam Input for the controller when it's first plugged in following the \"Turning off Steam Input\" tab here. Once checked, haptics and adaptive triggers (DualSense only) will work in games that support them when streaming from a PlayStation 5. If the DualSense is plugged in via USB (either initially or plugged in during a gaming session), haptics will be directed to it. If you are using the Steam Deck and don't have a DualSense plugged in, haptics will be directed to it and played via the trackpads.
Unmute microphone with either Ctrl+M or the mic button on the PlayStation controller. (This is set to L4 in the default chiaki4deck+ mic controller layout.) Then, use the microphone as normal. You can choose your microphone in the Steam Deck settings as well as choosing between audio inputs in the chiaki4deck menu.
Bluetooth headset microphones don't work on Steam Deck by default
The Steam Deck does not currently support microphones over bluetooth by default so you will need to either use a hardwired headset or the Steam Deck microphone unless you change your Steam Deck settings to enable bluetooth headset support (it is currently experimental and turned off by default due to a noticeable drop in audio quality). Thus, it's advised to use either a hardwired headset or the internal microphone. If you really want to use a bluetooth headset and can live with the drop in audio quality see How to enable bluetooth headset modes on Steam Deck.
"},{"location":"setup/controlling/#standard-button-mappings-these-directly-map-and-dont-need-to-be-specifically-set","title":"Standard Button Mappings (These directly map and don't need to be specifically set)","text":"Function Button right joystickright joystickleft joystickleft joystickdpad updpad updpad leftdpad leftdpad downdpad downdpad rightdpad rightstart buttonoption buttontriangleY buttonsquareX buttoncrossA buttoncircleB buttonR1R1R2R2R3R3 (right-stick click) L1L1L2L2L3L3 (left-stick click) stream menuL1+R1+L3+R3"},{"location":"setup/controlling/#using-a-dualsense-andor-dualshock4-controller-with-chiaki4deck","title":"Using a DualSense and/or DualShock4 Controller with chiaki4deck","text":"
While most users will want to just use chiaki4deck with the Steam Deck controller, you can also attach a DualShock 4 or DualSense controller via bluetooth or usbc. The controls will map automatically and there is even native touchpad (including gestures), gyro, haptics (DualSense via usb/usbc only), and adaptive triggers (DualSense only) support. This can be especially useful if you're playing chiaki4deck when connected to a dock using an external monitor or TV or if you just really like the feel of the traditional PlayStation controllers.
Pairing your DualShock 4 / DualSense with Steam Deck via Bluetooth
While holding the Share button, hold the PlayStation Button to put your controller into pairing mode. On the Steam Deck, hit the STEAM button and then select the Settings tab and then the Bluetooth tab (i.e., STEAM button->Settings->Bluetooth). Then, select your device from the list of devices. Once paired, it will automatically connect in the future when you press the PlayStation button on the controller.
"},{"location":"setup/controlling/#enabling-chiaki4deck-to-work-with-dualsense-dualshock-4","title":"Enabling chiaki4deck to Work with DualSense / DualShock 4","text":"
Make Sure your Controller is Connected for Configuration
Your PlayStation controller needs to be connected via bluetooth or usb cable for its tab to show up when you visit the chiaki4deck game page on your Steam Deck and edit the saved controller configuration. This configuration is specifically for your PlayStation controller and separate from the Steam Deck controller configuration for chiaki4deck. It will be activated automatically when you use the PlayStation controller with chiaki4deck (it will show up as a 2nd controller configuration since you will now have at least 2 active controllers [Steam Deck + PlayStation controller])
Turning off Steam Input (Recommended)Mapping All chiaki4deck Controls (Alternative Option)
Turning off Steam Input gets you as close to a native experience with your controller as possible (including the Home button serving as both the Steam and PlayStation button simultaneously).
This is necessary for the following capabilities:
Haptics (DualSense only, must be attached via USB)
Adaptive triggers (DualSense only, USB or bluetooth)
Gyro controls for games like Concrete Genie and Astro's Playroom (any controller SDL supports for gyro + accelerometer)
Won't Have Access to All chiaki4deck controls
With this option you won't have access to all of the shortcuts for chiaki4deck (toggling stretch Ctrl+S and zoom Ctrl+Z screen options and quitting gracefully Ctrl+Q) on your DualSense. However, if you have a keyboard connected to your Steam Deck, you can always use that for those shortcuts.
Turn off Steam Input for your PlayStation controller by doing the following:
Go to the chiaki4deck game page
Select the gamepad icon on the right hand side of the page to go the controller configuration menu
Move to the controller configuration tab for your PlayStation controller (if not already there)
Click the gear icon to the right of Edit Layout
Choose Disable Steam Input from the menu.
This tab shows you how to use Steam Input to map all of the controls for chiaki4deck to your PlayStation controller. This is great if you are using chiaki4deck with a TV. Since the PS Button maps to the STEAM button automatically and there are several commands in the default chiaki4deck configuration bound to back buttons (that don't exist on the PlayStation controllers), I have added these controls to a touch menu. It will show up when touching the left pad of the chiaki4deck controller. You have to click to select one of the extra commands (so you don't accidentally choose one during gameplay) from the radial menu. See the picture below for an example of what this looks like in-game:
No Haptics, Adaptive Triggers, or Gyro
Using Steam Input with your DualSense controller means you won't have access to haptics, adaptive triggers, or gyro controls via your DualSense. If these are important to you, please disable steam input according to the other tab.
The easiest way to configure all of the necessary shortcuts for chiaki4deck on DualSense is to copy the profile I have created in the COMMUNITY LAYOUTS tab with the aforementioned touch menu for extra commands. DualShock 4 can also use a similar layout mapping.
Add Default PlayStation Controller Mapping
Go to the chiaki4deck game page
Select the gamepad icon on the right hand side of the page to go the controller configuration menu
Move to the controller configuration tab for your PlayStation controller (if not already there)
Click the current layout box (it says: Browse Community Layouts for games without official controller support underneath it).
Move to the COMMUNITY LAYOUTS tab and select DualSense by gmoney23
This is what the full mapping looks like for reference:
Map it How you Want
Using Steam Input there are a variety of ways to map controls. Do whatever you like best. Additionally, you can use gyro controls for camera options with games that don't support native gyro by mapping the gyro As joystick. Make sure to set an appropriate condition for when it's used (i.e., when holding R1 or Always On) in the gyro settings for the PlayStation controller configuration option of chiaki4deck. For example, I have done this in the Steam Deck controller chiaki4deck control setting and you can do it for your DualSense control scheme as well. However, when playing games that have native gyro support (such as Concrete Genie or The Last of Us) you will most likely want to either temporarily this option or make sure to set something to enable it that you won't hit accidentally. Otherwise, both the native gyro and the action you map will be done in-game which can make your camera move when you're trying to shake your flashlight, etc.
You can copy from and paste into konsole windows with Ctrl+Shift+C (copy) and Ctrl+Shift+V (paste) instead of the normal Ctrl+C (copy) and Ctrl+V (paste) shortcuts. In fact, Ctrl+C is a shortcut to terminate the current process in the konsole. Additionally, you can still right-click and select copy or paste as per normal.
Using the Discover Store (Recommended)Using the konsole (If for some reason it doesn't show up on the Discover store)
This is a flatpak I created for chiaki4deck from updated Chiaki source code is available on Flathub. This is the recommended install as it is the most straightforward.
However, you can also build the flatpak yourself (recommended for users who want to add their own source code changes on top of the ones I've made) by following the instructions in Building the flatpak yourself.
"},{"location":"setup/remoteconnection/","title":"Set up chiaki4deck to work outside of your home network","text":""},{"location":"setup/remoteconnection/#remote-connection-via-psn","title":"Remote Connection via PSN","text":"
Supports IPV4 ONLY due to PlayStation itself only supporting IPV4 for remote play as of PS5
The remote connection via PSN uses PSN servers as an initial go-between to exchange the necessary information to initiate a direct connection between your client device (i.e., computer, portable gaming device, etc.) and your PlayStation console using a technique called UDP Holepunching. This replicates the behavior of this feature in the official remote play app from Sony.
Why do I need to login to PSN and how is this token used?
The remote connection via PSN requires you to login to PSN to generate an auth token used for contacting the PSN servers that serve as an initial go-between to initiate the direct connection to your PlayStation.
This auth token is stored locally and used to connect with the PSN servers (this can be verified by looking at the code [if you want to be doubly sure] as Chiaki4deck is open source) and not used or stored anywhere outside of that.
Console must be registered locally prior to using remote connection via PSN
To see the remote connection via PSN tab for the given console, the console must not be available locally (otherwise you would want to use a local connection as it is faster and more efficient)
Remote Connection via PSN for PS4 only works with the main registered console for your PSN account (Note: this is a limitation imposed by Sony not a limitation specific to Chiaki4deck)
Not All Networks Supported
Not all network types are supported by UDP holepunching. For some networks, this process will fail and in that case you will have to use a manual remote connection with port forwarding. If you have tried 5 or so times and it has failed consistently with the message Couldn't contact PlayStation over established connection, likely unsupported network type, your network type is currently unsupported. You will need to use the manual instructions. If you are able to connect over the same wireless connection with the official remote play app and are willing to help the Chiaki4deck developers improve Chiaki4deck to support your network type please reach out to the dev team via Reddit or email. If you are failing with Connection over PSN failed closing ..., please either add your logs to an appropriate existing issue or open a new issue on the Chiaki4deck Github.
Go to the Chiaki4deck settings page by hitting the gear icon from the main page
Go to the PSN tab and then click Login to PSN
Login to psn on the provided page
Tips for those having trouble logging into to PSN
If you get a connection to the server timed out message, keep on trying to login by hitting Enter every few seconds until you get a different error message such as Can't connect to the server or you have tried for at least 20 seconds. If that doesn't work, please try refreshing the page and going through the process again. If you still can't find success, make an attempt using a different browser.
Unfortunately, we have no control over Sony's site (that gives out auth tokens to access their PSN servers for the remote connection over PSN setup) so we can only give tips on how best to handle the errors that may occur on the page and wish you the best in obtaining your token. Fortunately, once this token is obtained, Chiaki4deck will automatically refresh it as needed and only ask for you to create a new token in the event that PSN requires you to generate a new one using your login.
Copy your redirect url from the browser
Paste your redirect url on the page and create your token
See success message and close the dialog box
Error Message
If you obtain an error with a link to Sony's oauth site, it is likely the code from the link has expired and you need to create a new code by logging in again and pasting the url into Chiaki4deck. The code usually expires within a few minutes. Otherwise, the error code should hopefully be self explanatory.
Register console (either locally or remotely via a manual connection) if it's not already registered
Switch to non-local internet (otherwise you would want to connect locally instead, so remote connections via PSN for consoles found locally aren't shown)
Click on the box of the console you want to connect to (it will say Remote Connection via PSN)
What if my console doesn't appear
Make sure the console is registered via the standard local registration
Make sure the console doesn't appear on your Chiaki4deck menu (i.e., make sure it's not available locally)
Hit the button to Refresh PSN hosts to query the PSN network again for the console.
Wait for the connection to load
Play
Testing
It may be hard to test if this feature is working properly for you at home (before using it remotely) if you don't have access to another network. In this case, you can use a cellular hotspot to test the connection.
In order to prevent your IP from changing which would break the port forwarding rules if you ever disconnect your PlayStation console from your network and reconnect it (especially if other devices are added to the network in the meantime), you should go into your router settings and reserve an IP address for your PlayStation (DHCP IP reservation / \"static\" IP) or create a hostname for it. For a TP-Link, Netgear, Asus or Linskys router, follow these instructions. If you have a different router, you can search (using a search engine such as DuckDuckGo or Google) for instructions for that specific router using the formula \"dhcp reservation myroutername router\" such as \"dhcp reservation netgear router\" and follow the instructions to reserve an IP for your PlayStation console so that it won't change. Alternatively, if your router has an option to set hostnames for your devices, you can set a hostname for your PlayStation console and use your hostname in the automation instead of a static IP address.
Forward the ports for your console on your router following this port forwarding guide starting with selecting your router
Close out of ads
If any ads appear as you navigate the website just hit the close button on the given advertisement to continue on your journey.
PS5PS4 Port Connection Type 9295 TCP 9296 UDP 9297 UDP 9302 UDP Port Connection Type 987 UDP 9295 TCP 9296 UDP 9297 UDP"},{"location":"setup/remoteconnection/#find-routers-ip","title":"Find Router's IP","text":"
On a computer connected to your router such as your Steam Deck (make sure to disconnect from a vpn first if you're connected to one to get the right IP) use one of the following:
BrowserKonsole/terminal
Visit whatismyip in your browser and copy the displayed IP
Add console to GUI using remote IP as a new manual connection
Click the plus icon in the main menu
Create your remote connection
Enter your remote IP/DNS
Choose the locally registered console you want to remotely connect to
Click Add
Connect using this new connection
The console selected for auto-connect will work with the manual remote connection out of the box for PS5. It will launch using the manual connection if it is discovered and the local connection is not discovered. For PS4, unfortunately, discovery doesn't work for remote connections so you will have to wake it up and start it manually from the menu.
My Remote Connection isn't Working, What Do I do?
If you have gone through the port forwarding and made sure everything is applied correctly and it still doesn't work, it is likely you are behind CGNAT (carrier-grade NAT). This means the router that you would need to forward ports on is owned by the ISP and you can't access it to do so. (Note: There is a protocol called PCP (Port Control Protocol) that allows you to access it but if port forwarding doesn't work that means either your ISP or router doesn't support it.) This means port forwarding won't work. You can try the remote connection via PSN as this can still work given you have a compatible network type. However, is that isn't working either you will need to setup a VPN on your home network to connect. See this site for details on how to do setup a VPN using a raspberry PI with Chiaki4deck (replace Chiaki with Chiaki4deck).
If my connection stops working, what should I do?
If the connection stops working please make sure that the IP address for your router hasn't changed by checking it again via one of the methods above or a different one to make sure it's the same. If it has changed, you will need to update to the new IP address of your router.
"},{"location":"setup/steaming/","title":"Adding Chiaki4Deck to Steam","text":"Automatic Process for Auto-connect or Standard LaunchManual Process for Automation Script
Choose Add Create Steam Shortcut from Main Menu
Fill in name for Steam Shortcut and optional launch options
Fill in name for Steam Shortcut and optional launch options
Launch Options
In most cases, you can leave this blank. One scenario where you would fill this out is if you have multiple users on the same Steam Deck. In this case you can use --profile user1 for one shortcut and --profile user2 for another.
Create Steam Shortcut by hitting Create button
Game (Mode) Time!
You have successfully added chiaki4deck to Steam with pictures and (if on Steam Deck) set the chiaki4deck+ mic Steam Deck controller shortcut.
You can now close any open applications and or terminals (forcing them to close if necessary) and then switch to Game Mode by clicking on the Return to Gaming Mode desktop icon.
Another Non-Steam Game
This is the same process as with other non-Steam games, tailored to the chiaki4deck script and images.
Open the Add a Non-Steam Game prompt
Via user interface / application (GUI)Via konsole
Launch Steam by double clicking on the Steam icon in your desktop or finding it in your apps menu.
Click Add a Non-Steam Game from the Games Menu on the top left of the Steam UI
Run the following command in a konsole window to bring up the Add Non-Steam Game prompt
steam steam://AddNonSteamGame\n
Choose to BROWSE for the game
Show hidden files using the GUI or Ctrl+H (to see the hidden . directories)
Choose Chiaki-launcher.sh as your game
If You're missing Chiaki-launcher.sh, You Skipped the Automation Section
Chiaki-launcher.sh is a script to launch Chiaki without the main gui, resulting in a much better experience on the Steam Deck (click for details) and makes it easier to use the 3 games modes. If Chiaki-launcher.sh is missing, you almost certainly skipped the automation section. Don't worry, the fix is easy! Please complete the Automation section now and come back here afterward. It should take you ~ 5 minutes. Luckily, there is a helper script that does most of the work for you! You simply answer a few questions I walk you through.
Choose File type: All Files at the bottom of the screen
Choose /home/deck from the dropdown at the top of the screen and then navigate by clicking on each folder to the folder /home/deck/.var/app/io.github.streetpea.Chiaki4deck/config/Chiaki
Click on the Chiaki-launcher.sh file in that directory
Click OPEN on the bottom right
Click Add Selected Programs
"},{"location":"setup/steaming/#configuring-name-and-game-icons","title":"Configuring Name and Game Icons","text":"
Steam Application Name Matters!
For Non-Steam games (i.e., chiaki4deck), the Community Layouts controller layouts are based on the name the user set for the game in Steam when they exported it. Thus, in order to find the controller profiles I created for the game in your Community Layouts section later in this guide, your game name will need to the same as mine, (i.e., chiaki4deck). This naming is done in step 4 (below) and it's recommended that you just keep your game name as chiaki4deck to make your life easier.
What if naming chiaki4deck something else fills me with determination...?
If you want to use a different game name (i.e., Playstation Launcher Thingamajig) and want to use some or all of the controller layouts I have created (either directly or to download them and use them as a starting point to tinker from), name your game what you want in step 4. Then, when you get to the controller section, follow Retrieving chiaki4deck Controller Layouts when Using An Alternate Game Name. This walks you through temporarily renaming the app to chiaki4deck to access the controller layouts and save them as Personal Saves to access in the Your Layouts tab. Finally, you can rename you game to what you want and apply your layout to this differently named Steam game.
Acquire pictures to use for the game library in Steam
Get the images I used here for chiaki4deck on my Steam Deck.
Extract the package to a folder of your choice (such as your Documents folder).
How do I extract the images folder?
Double click on the downloaded package in your browser or find the file in your Downloads folder and right-click on it choosing to Extract To and then selecting the folder of your choice (such as your Documents Folder)
Note
This will create a folder named chiaki4deckImages in the folder you choose to extract to
SteamGridDB
The images I provided are from Steam Grid DB and I do not own these images, I'm simply directing you to them for your convenience. You can find these and other images yourself on SteamGridDB as well as via other sources of your choosing.
If it is not already open, launch Steam and go to your game Library.
Right-click on Chiaki-launcher.sh in your Games on the left-hand side and select Properties
In the properties window that comes up rename Chiaki-launcher.sh and add the icon image
Rename it chiaki4deck
Click on the blank square to add an image and navigate to the chiaki4deckImages folder you created in step 1 above and select the icon image (icon-chiaki4deck.png).
Click the x to exit the window
Finished chiaki4deck Properties
Go to your Library in Steam and select chiaki4deck from the left-hand list or one of the Library categories to go to chiaki4deck's game page.
Customize the background and logo for Chiaki4deck
Customize the background
Right-click on the blank space and select Set Custom Background
Browse to the chiaki4deckImages folder you created earlier and select the background image (background-chiaki4deck.png)
Customize the logo
Right-click on the blank space and select Set Custom Logo
Browse to the chiaki4deckImages folder you created earlier and select the logo image (logo-chiaki4deck.png)
Finished chiaki4deck Home Page
Customize the wide capsule and capsule images
Launch chiaki4deck via Steam by hitting the Play button or any other method and then close.
Go to your Library in Steam and scroll to your RECENT GAMES section.
Right-click on the blank picture for chiaki4deck (should be 1st in RECENT GAMES and have a blank image with a landscape orientation) and select Manage->Set custom artwork
Browse to the chiaki4deckImages folder you created earlier and select the wide capsule (wcap) image (wcap-chiaki4deck.png)
Launch a different game and close it (this moves chiaki4deck into the second slot in recent games)
Right-click on the blank picture for chiaki4deck (should be 2nd in recent games and have a blank image with a portrait orientation) and select Manage->Set custom artwork.
Browse to the chiaki4deckImages folder you created earlier and select the capsule (cap) image (cap-chiaki4deck.png)
Game (Mode) Time!
You have successfully added chiaki4deck to Steam with pictures.
You can now close any open applications and or terminals (forcing them to close if necessary) and then switch to Game Mode by clicking on the Return to Gaming Mode desktop icon.
This section covers the updates to Chiaki in chiaki4deck. Information about each release and how to update is in the Releases Section. Updates that are currently done (implemented) are listed in the Done section along with details, while updates that are planned for the future are listed in the Planned section.
Why These Updates?
I started by simply choosing to update things that would give me a better experience with Chiaki on my Steam Deck. I have also begun incorporating suggestions from users of chiaki4deck via chiaki4deck's GitHub issues page (both issues created by GitHub users as well as issues from Reddit users that I created for them in GitHub for tracking). Given the current state of the Chiaki project (maintenance mode), I'm not sure if all of these changes will be accepted upstream. However, so far several changes included here (some by Street Pea and some by Johannes Baiter) have been merged upstream (though are not part of the official flatpak yet since a new release has not been cut). These are marked appropriately in the done section with the relevant footnotes. I will also continue sending patches upstream for my Chiaki updates. I have created chiaki4deck as a means to distribute these changes to others using the Steam Deck as well as others wanting to add additional beneficial features on top of mine. Currently, I am aiming to make chiaki4deck work for all traditional Chiaki users (may not benefit other users as much as Steam Deck users, but wouldn't be bad for those users either).
"},{"location":"updates/done/","title":"Completed (Done) Updates","text":""},{"location":"updates/done/#remote-connection-via-psn","title":"Remote Connection Via PSN","text":"
Enabled remote connection via PSN so users can use this instead of port forwarding on their routers as an option.
"},{"location":"updates/done/#touch-friendly-and-controller-navigable-gui","title":"Touch Friendly and Controller Navigable GUI","text":"
QML based user interface that is better suited for handheld computers such as the Steam Deck and more user-friendly in general.
"},{"location":"updates/done/#hdr-for-steam-deck-oled-in-game-mode","title":"HDR for Steam Deck OLED in game mode","text":"
You can now use HDR with your Steam Deck OLED thanks to Johannes Baiter and David Rosca as well as many patient testers. In order to enable this, you must have:
An HDR-capable streaming device such as the Steam Deck OLED or an OLED monitor attached to an LCD Steam Deck(non-HDR device will still work but use tonemapping instead of outputting HDR)
A PlayStation 5 console (PlayStation 4 doesn't support H265 streaming)
An HDR-capable TV/monitor attached to your Playstation 5 (depending on the connected HDR TV/monitor it may also need to be turned on for the PS5 to output HDR. You can test the PS5 is outputting HDR by going to a game that has HDR settings in the menu such as Cyberpunk 2077 or Ghost of Tsushima and seeing if the game will let you adjust those)
"},{"location":"updates/done/#enabled-touchpad-for-steam-deck-touchscreen-andor-trackpads","title":"Enabled Touchpad for Steam Deck Touchscreen and/or Trackpads","text":"
Added Touchpad support for touchscreens (use outer edges of touchscreen for touchpad click) as well as mouse input (enables trackpads to be fully supported with gestures on touch and touchpad click on click). For an example mapping these in a Steam Deck controller profile, see Default chiaki4deck Layout Touchscreen Mapping and Default chiaki4deck Layout Trackpad Mapping respectively. Downloading the updated chiaki4deck+ controller layout will have these mappings set for your convenience.
"},{"location":"updates/done/#enabled-gyro-for-steam-deck","title":"Enabled Gyro for Steam Deck","text":"
Added gyro support for Steam Deck via a native interface since SDL2 doesn't support Steam Deck gyro due to Steam's virtual gamepads not providing gyro.
"},{"location":"updates/done/#enabled-mic-support","title":"Enabled Mic Support","text":"
You can now attach a microphone and use it to chat online or use in games. There is also noise suppression and echo cancelling for the mic you can configure in the chiaki4deck settings.
Added ability to create a Steam shortcut with the name of your choice and Chiaki4deck artwork and the Steam Deck controller profile from the main menu. This makes setup even easier on Steam Deck.
"},{"location":"updates/done/#enabled-haptics-for-steam-deck-and-dualsense-controller-adaptive-triggers-for-dualsense","title":"Enabled Haptics for Steam Deck and DualSense controller + adaptive Triggers for DualSense","text":"
Haptics enabled for PlayStation 5 thanks to Johannes Baiter. You can use a USB connected DualSense for haptics and adaptive triggers or a bluetooth connected DualSense for just adaptive triggers. To use these features for the DualSense in game mode, please disable Steam Input for the DualSense controller following the \"Turning off Steam Input\" tab in this section.2.
I have also added the capability to play the haptics via the Steam Deck controller using the native interface I added.
You can also use rumble haptics for controllers without integrated haptics or the Steam Deck if the noise of its haptics bothers you.
RGB mapping update thanks to Egoistically via a Chiaki fork which is of course copy-left under the GNU Affero General Public License version 3 as are all of the other chiaki4deck changes. I added the patches to chiaki4deck and it results in a more accurate picture. Joni Bimbashi updated the initial mapping to work with HW acceleration. Below is a BEFORE and AFTER from Ghost of Tsushima.
BEFORE
AFTER
"},{"location":"updates/done/#3-view-modes-for-non-standard-screen-sizes","title":"3 view modes for non-standard screen sizes","text":"
It's great to have these options for Steam Deck's non-standard 1280x800 resolution.3
Using These Options Without the Automation [Not Recommended] (click me to open)
If for some strange reason you want to launch chiaki4deck via the GUI instead of the automation (not recommended due to the items noted here), it launches by default in a window matching the aspect ratio of the stream (i.e., 16:9). This means that the stream output exactly matches the stream window. In this scenario, there is nothing to stretch or zoom the stream output to because the stream output already perfectly matches with the stream window. If you want to stretch or zoom, you would need to first either:
Adjust the window to a bigger or smaller size with your mouse in Desktop Mode (perhaps you want to use chiaki4deck as half of your screen in Desktop mode)
OR
Use fullscreen mode by:
Pressing F11 (either directly in Desktop Mode or via a controller mapping in Game Mode)
OR
Double clicking on the screen in Desktop Mode
Then, you could use stretch and/or zoom accordingly (i.e., Ctrl+S / Ctrl+Z or button mapped to them in game mode).
Normal (default) [used for fullscreen launch option]
Maintains aspect ratio, adds black bars to fill unused parts of screen
Zoom using Ctrl+Z to toggle
Maintains aspect ratio, cutting off edges to fill screen
Stretch using Ctrl+S to toggle
Stretches image (distorting aspect ratio) to fill screen
"},{"location":"updates/done/#quit-function-ctrlq","title":"Quit function Ctrl+Q","text":"
Cleanly quits Chiaki, respecting the user's configuration option of either asking to put PlayStation console sleep, putting PlayStation console to sleep without asking, or leaving PlayStation console on.3
What does this do for me?
Now, if you hit a back button (or other button) mapped to Ctrl+Q on your Steam Deck, your remote play session will shut down cleanly and put your console to sleep automatically if you so choose. This means you no longer have to manually put your console to sleep via a menu or the power button on the PlayStation console itself.
"},{"location":"updates/done/#enabled-automated-launch-and-auto-connect","title":"Enabled Automated Launch and Auto-connect","text":"
This skips the need to visit the configuration screen each time. Use auto-connect if you have one console to choose from and this will work out of the box. Otherwise, you can create an automation script to do this for you. I have added a helper script to generate a Chiaki-launcher.sh script as well as provided complete instructions in the Automation section.
"},{"location":"updates/done/#enabled-touchpad-and-gyro-controls-with-dualsensedualshock-4-controller-for-flatpak","title":"Enabled Touchpad and Gyro Controls with DualSense/DualShock 4 Controller for Flatpak","text":"
This makes it as easy as possible for Steam Deck users to use touchpad and gyro support with their DualSense or DualShock 4 controller. See Using a DualSense and/or DualShock4 Controller with chiaki4deck to set it up for yourself.3 The DualSense/DualShock 4 touchpad and gyro controls work with the binary version of Chiaki but don't work with the official flatpak version. Luckily for you, they now work with the chiaki4deck flatpak!
merged upstream, but not yet released in official flatpak\u00a0\u21a9
partially merged upstream\u00a0\u21a9
now part of upstream Chiaki as of latest release\u00a0\u21a9\u21a9\u21a9
"},{"location":"updates/planned/","title":"Future Updates Planned","text":""},{"location":"updates/releases/","title":"chiaki4deck Releases","text":""},{"location":"updates/releases/#moving-to-flathub","title":"Moving to FlatHub","text":"
Legacy Repo Deprecation
Chiaki4deck is now on flathub. If you previously installed chiaki4deck via the konsole the flatpak has changed to io.github.streetpea.Chiaki4deck. The old repo is now deprecated in favor of using Flathub since Flathub is added by default to the Steam Deck and the hosting is at no cost to the project (unlike the initial repo). While the software will still be accessible from the old repo, it is encouraged for users to switch over.
To migrate to the flathub repo do the following:
Move chiaki4deck's configuration files to their new location
Provides unique remote and local Stream Settings for each console (PS4/PS5)
Separate Local and Remote and PS4/PS5 settings so you can set appropriate settings for each type of connection
Enable more network types to work with remote connection via PSN (Note: some can only be made to work a % of the time due to limitations with remote play imposed by Sony)
Export/import option for settings to transfer across devices/platforms
Adds auto hw decoder option which is now the default. It chooses the best decoder for your platform from the available decoders
Make Chiaki4deck ipv6 compatible (ipv6 not yet supported by remote play on the console [i.e., in Sony's PlayStation firmware] so can't be used yet)
Adds multiplier to accelerometer values to match acceleration values of lighter DualSense/DualShock 4 controller. Fixes issue in some games where the acceleration value wasn't high enough when moving/shaking the Steam Deck to trigger the in-game action.
Noise suppression and echo cancelling for mic configurable in the chiaki4deck menu
Why doesn't my bluetooth headset mic show up as an available microphone on Steam Deck?
The Steam Deck does not currently support microphones over bluetooth by default so you will need to either use a hardwired headset or the Steam Deck microphone unless you change your Steam Deck settings to enable bluetooth headset support (it is currently experimental and turned off by default due to a noticeable drop in audio quality). Thus, it's advised to use either a hardwired headset or the internal microphone. If you really want to use a bluetooth headset and can live with the drop in audio quality see How to enable bluetooth headset modes on Steam Deck.
"},{"location":"updates/releases/#update-actions-for-existing-users","title":"Update Actions for Existing Users","text":"
Updating chiaki4deck
[Optional] Switch to the new default control layout chiaki4deck+ mic which adds toggle mic mute to L4. Alternatively, you can manually add toggle mic mute to a button of your choice by mapping Ctrl+M to that button.
Haptics support for DualSense (via USB) and Steam Deck [experimental]
Adaptive triggers with DualSense (via USB or Bluetooth)
Automation script tweaks (allow using hostname and specifying external IP / hostname in addition to local one)
Documentation Updates (new DIY sections on building docs + development builds on Steam Deck + document various 1.3.0 features and changes for new and existing users)
Bug fixes (audio bug causing crash in base Chiaki fixed, mismatch between cli and automation script leading and lagging space handling fixed, etc.)
"},{"location":"updates/releases/#update-actions-for-existing-users_1","title":"Update Actions for Existing Users","text":"
Updating chiaki4deck
[Optional] Enable the experimental PlayStation 5 features (enables PlayStation 5 haptics for Steam Deck and DualSense [via USB] and adaptive triggers for DualSense [via USB or bluetooth]).
Check the box shown in the image below in the GUI.
[If you are using a DualSense] Turn off Steam Input for the DualSense following the \"Turning off Steam Input\" tab in this section.
[Optional] Add an external IP/hostname to the automation by revisiting (running back through) the Automation section. Doing this will make the automation use your external address if you aren't connected to your home wireless network.
Note
This is for those that have gone through the process to make a connection outside of their local network to get an external IP/hostname to use.
"},{"location":"updates/releases/#what-you-need-to-do-to-update","title":"What You Need to Do to Update","text":"
Updating chiaki4deck
Updating your controller config to the new default (chiaki4deck+) and/or updating your custom controller layouts to take advantage of native touchscreen / trackpad controls. See the Controller Options section for details.
Using the Default Controller Profile (Recommended Starting Point):
Open the chiaki4deck Controller Options section, browsing the COMMUNITY LAYOUTS tab for the chiaki4deck+ config, downloading it, and setting it as your new layout.
[Approximate Time Estimate: 1 minute]
Creating a Custom Controller Profile (Great for tinkering, especially for updating the default profile to meet your needs exactly):
Make a custom controller profile using the Creating Your Own Controller Profile section, taking special note of the Special Button Mappings and Using Steam Deck Controller Touchscreen in Your Custom Controller Profile
[Approximate Time Estimate: 10-20 minutes depending on your experience with Steam Deck Controller Layouts]
[OPTIONAL] If you have a PlayStation Login Passcode and want entering it to be automated, please revisit (run back through) the Automation section (don't need to revisit any of the other sections). This is really quick if you use the \"Automated Instructions (Recommended)\" Tab. [Approximate Time Estimate: 5 minutes]
Success
Once your script is updated, since it will be in the same location as before, the Game Mode and controller setup will automatically carry over to this updated automation script. Thus, after revisiting the Automation section, you can immediately go back to using chiaki4deck.
"},{"location":"updates/releases/#what-you-get-by-updating","title":"What you Get by Updating","text":"
Full mapping for the PlayStation touchpad to the Steam Deck's touchscreen and trackpad (you can use either or switch between them if you so choose). See the touchscreen and trackpad mapping subsections of the Controller Options section for details.
General Touchscreen and Mouse Support
This update adds general touchscreen and mouse support for the PlayStation touchpad. Thus, it's applicable beyond the Steam Deck. With regard to chiaki4deck, the Steam Deck is the focus / inspiration for the update.
Updated RGB color mapping used in OpenGL widget to be more color accurate thanks to Egoistically's Chiaki fork. See Updated RGB Mapping for details and a before and after comparison in Ghost of Tsushima.
Automatic Login Passcode Entry (For Users with a Login Passcode)
If you have to enter a login passcode each time you turn on your PlayStation console and login, you can now enter it into the automation to login from your personal Steam Deck without the hassle of bringing up the virtual keyboard with Steam ++X and entering it in each time.
"},{"location":"updates/releases/#what-you-need-to-do-to-update_1","title":"What You Need to Do to Update","text":"
Updating chiaki4deck
Revisiting (running back through) the Automation section (don't need to revisit any of the other sections). This is really quick if you use the \"Automated Instructions (Recommended)\" Tab.
Success
Once your script is updated, since it will be in the same location as before, the Game Mode and controller setup will automatically carry over to this updated automation script. Thus, after revisiting the Automation section, you can immediately go back to using chiaki4deck.
[If desired] Visit the Using a DualSense and/or DualShock4 Controller with chiaki4deck to see how to setup native touchpad and gyro controls when playing chiaki4deck with the DualShock4 and DualSense controllers.
"},{"location":"updates/releases/#what-you-get-by-updating_1","title":"What you Get by Updating","text":"
PlayStation controller native touchpad + gyro controller support enabled for the flatpak with setup instructions in Using a DualSense and/or DualShock4 Controller with chiaki4deck. This is great for when your using a TV or monitor with your Steam Deck.
Enhanced automated launch
Specifically, I upgraded the discovery cli command to work properly and updated the automation script (and accompanying generator script) to to take advantage of this command instead of ping to handle some cases that failed intermittently before.
Now, the automation works for edge cases such as:
user is remote playing from outside their home wireless network (given they've already done the networking setup for that)
console is in the process of going to sleep or coming online when remote play session launched
console is currently downloading a large game
user doesn't have ping enabled on his/her wireless network
chiaki4deck's initial release including the following notable updates:
3 view modes for non-standard screen sizes
Quit function Ctrl+Q
Enabled Automated Launch
"}]}
\ No newline at end of file
diff --git a/setup/configuration/index.html b/setup/configuration/index.html
index 1230282e..aa07a863 100644
--- a/setup/configuration/index.html
+++ b/setup/configuration/index.html
@@ -1330,7 +1330,7 @@
(choose the PS5 HDR tab if you have a PS5 connected to a HDR TV/monitor (see HDR section below for more details), PS5 if you have a PS5 not connected to an HDR TV/monitor, and PS4 if you have a PS4). If you are having issues with your PS5 connection, please try switching to 720P following with its default bitrate of 10,000 with your PS5 since that requires significantly less bandwidth from your wireless router.
-
+
-
Stream output can be up to 1080p with HDR. Here are the settings that are currently working well for me. This results in a native-like experience for most games on my network/setup.
-
+
Stream output with HDR. This are the recommended PS5 settings for a device that supports HDR such as the Steam Deck OLED.
+
+
+Why 1080p if the Steam Deck is only 800p?
+
Using 1080p results in a better picture for me than 720p. The biggest factor in this seems to be chroma-sub sampling. In simple terms, the colors for an image are compressed and so you get a much lower resolution of color data than your image resolution. This means a 1080p image (with a high bitrate) will have more color data than a 720p image even if the image resolution itself ends up being 720p (since the color resolution will be higher than the equivalent 720p picture's color resolution). This results in an image that has more pop to it. Thus, I recommend streaming at 1080p if you have the bandwidth (good enough wireless router).
+
However, if you are having issues with your wireless connection (i.e choppy audio, flashes in your video, or lag) while playing, then please use 720p instead. The gains you get from 1080p are nice, but aren't worth having a bad connection.
+
-
Stream output can be up to 1080p. Here are the settings that are currently working well for me. This results in a native-like experience for most games on my network/setup.
-
+
These are the recommended PS5 settings for a device that doesn't support HDR like the ROG Ally.
+
Why 1080p if the Steam Deck is only 800p?
Using 1080p results in a better picture for me than 720p. The biggest factor in this seems to be chroma-sub sampling. In simple terms, the colors for an image are compressed and so you get a much lower resolution of color data than your image resolution. This means a 1080p image (with a high bitrate) will have more color data than a 720p image even if the image resolution itself ends up being 720p (since the color resolution will be higher than the equivalent 720p picture's color resolution). This results in an image that has more pop to it. Thus, I recommend streaming at 1080p if you have the bandwidth (good enough wireless router).
@@ -1374,8 +1384,8 @@
Choosing your Remote Play Settings
-
For PS4, the stream is limited to 720p. Using the defaults for most values works well here, resulting in native-like (albeit w/ a diminished resolution) experience for most games on my network/setup.
-
+
This is the recommended setting for a PS4. If you have a PS4 pro you can use 1080P instead.
+
@@ -1509,7 +1519,7 @@
Chiaki/
Last update:
- May 10, 2024
+ June 9, 2024
Created:
diff --git a/setup/images/1080P_Settings.png b/setup/images/1080P_Settings.png
deleted file mode 100644
index 4242973d..00000000
Binary files a/setup/images/1080P_Settings.png and /dev/null differ
diff --git a/setup/images/1080P_SettingsHDR.png b/setup/images/1080P_SettingsHDR.png
deleted file mode 100644
index c2f05f6e..00000000
Binary files a/setup/images/1080P_SettingsHDR.png and /dev/null differ
diff --git a/setup/images/720P_PS5HDRSettings.png b/setup/images/720P_PS5HDRSettings.png
new file mode 100644
index 00000000..0e0ef08d
Binary files /dev/null and b/setup/images/720P_PS5HDRSettings.png differ
diff --git a/setup/images/720P_Settings.png b/setup/images/720P_Settings.png
deleted file mode 100644
index f687e6f8..00000000
Binary files a/setup/images/720P_Settings.png and /dev/null differ
diff --git a/setup/images/AudioSettings.png b/setup/images/AudioSettings.png
index af36b240..cca1d89a 100644
Binary files a/setup/images/AudioSettings.png and b/setup/images/AudioSettings.png differ
diff --git a/setup/images/ClickLoginToPsn.png b/setup/images/ClickLoginToPsn.png
index feb4a3e4..94fffc01 100644
Binary files a/setup/images/ClickLoginToPsn.png and b/setup/images/ClickLoginToPsn.png differ
diff --git a/setup/images/PS4_Settings.png b/setup/images/PS4_Settings.png
new file mode 100644
index 00000000..7e938948
Binary files /dev/null and b/setup/images/PS4_Settings.png differ
diff --git a/setup/images/PS5_SettingsHDR.png b/setup/images/PS5_SettingsHDR.png
new file mode 100644
index 00000000..5399b99f
Binary files /dev/null and b/setup/images/PS5_SettingsHDR.png differ
diff --git a/setup/images/PS5_SettingsSDR.png b/setup/images/PS5_SettingsSDR.png
new file mode 100644
index 00000000..bd48ced2
Binary files /dev/null and b/setup/images/PS5_SettingsSDR.png differ
diff --git a/setup/images/VideoSettings.png b/setup/images/VideoSettings.png
new file mode 100644
index 00000000..7731b4e9
Binary files /dev/null and b/setup/images/VideoSettings.png differ
diff --git a/sitemap.xml b/sitemap.xml
index 9eeb024e..835f1f2c 100644
--- a/sitemap.xml
+++ b/sitemap.xml
@@ -2,77 +2,77 @@
https://streetpea.github.io/chiaki4deck/
- 2024-05-31
+ 2024-06-09dailyhttps://streetpea.github.io/chiaki4deck/diy/builddocs/
- 2024-05-31
+ 2024-06-09dailyhttps://streetpea.github.io/chiaki4deck/diy/buildit/
- 2024-05-31
+ 2024-06-09dailyhttps://streetpea.github.io/chiaki4deck/diy/steamdeckdev/
- 2024-05-31
+ 2024-06-09dailyhttps://streetpea.github.io/chiaki4deck/setup/
- 2024-05-31
+ 2024-06-09dailyhttps://streetpea.github.io/chiaki4deck/setup/automation/
- 2024-05-31
+ 2024-06-09dailyhttps://streetpea.github.io/chiaki4deck/setup/configuration/
- 2024-05-31
+ 2024-06-09dailyhttps://streetpea.github.io/chiaki4deck/setup/controlling/
- 2024-05-31
+ 2024-06-09dailyhttps://streetpea.github.io/chiaki4deck/setup/installation/
- 2024-05-31
+ 2024-06-09dailyhttps://streetpea.github.io/chiaki4deck/setup/remoteconnection/
- 2024-05-31
+ 2024-06-09dailyhttps://streetpea.github.io/chiaki4deck/setup/steaming/
- 2024-05-31
+ 2024-06-09dailyhttps://streetpea.github.io/chiaki4deck/updates/
- 2024-05-31
+ 2024-06-09dailyhttps://streetpea.github.io/chiaki4deck/updates/done/
- 2024-05-31
+ 2024-06-09dailyhttps://streetpea.github.io/chiaki4deck/updates/planned/
- 2024-05-31
+ 2024-06-09dailyhttps://streetpea.github.io/chiaki4deck/updates/releases/
- 2024-05-31
+ 2024-06-09daily
\ No newline at end of file
diff --git a/sitemap.xml.gz b/sitemap.xml.gz
index 9db4551c..aa55d3ec 100644
Binary files a/sitemap.xml.gz and b/sitemap.xml.gz differ
diff --git a/updates/releases/index.html b/updates/releases/index.html
index 0fe68bcd..8afed714 100644
--- a/updates/releases/index.html
+++ b/updates/releases/index.html
@@ -625,6 +625,13 @@
