From ba10c9bdc378a410aff2cde10c28e5decb163962 Mon Sep 17 00:00:00 2001 From: Jacob Kauffmann Date: Tue, 23 Apr 2024 00:44:41 -0600 Subject: [PATCH] addw3 (repairs): Correct duplicate number in thermal system steps This issue was not visible on the compiled webpage, only in the source code. --- src/models/addw3/repairs.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/models/addw3/repairs.md b/src/models/addw3/repairs.md index 44a82b0d..f93bae57 100644 --- a/src/models/addw3/repairs.md +++ b/src/models/addw3/repairs.md @@ -148,7 +148,7 @@ Depending on your climate and the age of the machine, it may be necessary to app 1. Follow the steps above to [remove the bottom cover](#removing-the-bottom-cover). 2. Remove any clear tape that is securing the fan wires. - Some tape may be underneath the heatsink; it can alternatively be removed after removing the heatsink. -2. Remove the thirteen heatsink and fan screws in order of the stamped numbers, starting with #1, then #2, and continuing until you have removed #13. +3. Remove the thirteen heatsink and fan screws in order of the stamped numbers, starting with #1, then #2, and continuing until you have removed #13. - The black screws (#1-#12) are held captive, and will not completely detatch from the heatsink/fans. The silver screw (#13) is not held captive, and will come loose when untightened. - Do not remove the smaller black screws holding the fan covers onto the fans.