Bottom fastener for Trident_housing.stl for retractable probe is too long

[kyleisah]

Hello, the BOM M5x10 fastener is too long for Trident_housing.stl, the bolt will bottom out into the extrusion and provide no grip. The mount needs to be thickened or shims will need to be added to the BOM. My vote is on thickening the housing. :)

[kyleisah]

Seems the side of the mount is 4mm, and the bottom of the mount is 3mm. This is what I gathered from converting the mesh to a solid in CAD at least. If there was a CAD available I'd be able to just make a PR for the STL.