- Hotend: Phaetus Dragon HF x Voron Edition
- Control Board: BTT Octopus V1.1
- Bed Heater: 400W Keenovo Bed Heater.
- Motors: OMC StepperOnline.
- Frame: Misumi.
- PSU: Mean Well RSP-200-24.
- Bed: MIC6 Cast Aluminum bed.
- eddies LED bar clips to mount 5050 LEDs to the inside of the top extrusions.
- nevermore micro v5 duo for cleaning the chamber air.
- VEFACH for cleaning the exhaust air.
- decontaminator and nozzle scrubber for cleaning the nozzle when calibrating in before a print.
- 3x5 angle wago mount (STL?) for mains wiring.
- 6x2 wago mount for bed wiring (STL?).
- right angle decontaminator bucket mount (STL?).
All parts were sourced individually and not from a kit. Notable sources are:
- maskindelen.se for nearly all of my fasteners.
- digikey.se for genuine electronics (omron switches, SSR, molex kit).
- conrad.se for the PSU, electrical outlets, and some random bits and bobs.
- tme.eu for wires. I use LAPP ÖLFLEX HEAT 260 SC PTFE wiring in my drag chains.
- vonwange.com for hotend, thermistors, heater.
- kris3d.de for the aluminium bed, bowden tube, dupont connnectors.
- mouser.se for electronics unavailable at digikey.
- oljemagasinet for the EP2 grease.
- print it forward for the printed parts.
- aliexpress for everything where quality and delivery speed aren't important.
I ordered my aluminium extrusions from Misumi.
Misumi does not sell to consumers. I had the luck of meeting a new friend in Discord from Germany who ordered frames for me and shipped them to Sweden. Per their recommendation I ordered the extrusions untapped and drilled, and saved myself half the cost. In addition I got to learn how to drill and tap aluminium. Fun!
See panels/ for details on the pink acrylic mirrors.