Skip to content

Chrezm/TsuserverDR

BranchesTags
 
 

Repository files navigation

Build Status

TsuserverDR

A Python-based server for Danganronpa Online. It is a fork from tsuserver3 which is targeted towards Attorney Online.

Requires Python 3.9-3.11, PyYAML and aiohttp (follow instructions below to install).

How to use

Installing

It is highly recommended you read through all the installation steps first before going through them.

  • Install the latest version of Python. Python 2 will not work.

    • You can download Python from its official website here. If you already have Python installed, check that your Python version satisfies the version requirement listed above.
    • If prompted during the installation to add python as a PATH environment variable, accept this option. You may see this option appear on the very first screen during the installation process.
    • If you know what a virtual environment is and your system supports it, it is recommended that you use one, such as Anaconda for Windows, or virtualenv for everyone else (it runs itself using Python). If you do not know what a virtual environment is, you may skip this point.
    • If you have Python 3.8 or lower, you will be prompted on server launch to update to a newer version of Python. That is because the server requires Python 3.9 or higher. Follow instructions under Updating to update your Python version.

  • Open Command Prompt, PowerShell or your preferred terminal, and change to the directory where you downloaded TsuserverDR to. You can do this in two ways:

    • On Windows 10 or higher, go up one folder above the TsuserverDR folder, Shift + right click the TsuserverDR folder, and click Open PowerShell window here or Open in Terminal. This is the easiest method. Alternatively...
    • On most operating systems, copy the path of the TsuserverDR folder, open the terminal, and type in cd "[paste here]", excluding the brackets, but including the quotation marks if the path contains spaces.

  • Make sure Python is properly installed by typing python in the terminal and pushing Enter.

    • If text that starts with Python 3.11.0 (main, or similar appears, you are all set with this step. Push Ctrl+Z followed by Enter to continue to the next step if you are on Windows; and Ctrl+D if you are on Linux.
    • If text that starts with The term 'python' is not recognized as the name of a cmdlet or similar, Python wasn't properly added to path. Follow the instructions here to try and fix the issue (this is for Windows, instructions for other operating systems are also available in the same website if you scroll further down).
    • If on Windows and a separate window opens that leads to the Microsoft Store, Windows may have added an execution alias. Follow the instructions here to try and remove this alias.

  • Install all dependencies by typing in the following two commands in the terminal you just opened:

    python -m pip install --upgrade pip
python -m pip install --user -r requirements.txt

    If you are using Windows and have both Python 2 and 3 installed, you may do the following:

    py -3 -m pip install --upgrade pip
py -3 -m pip install --user -r requirements.txt

    This operation should not require administrator privileges, unless you decide to remove the --user option.

  • Rename the folder config_sample to config and edit the values in the provided YAML files to your liking. Be sure to check the YAML files for syntax errors after you are done. Use spaces only; do not use tabs.

  • If you intend to have players outside of your network connect to your server, open or forward the port that you would like them to connect to. The port number is available in config/config.yaml next to port, and you may change it to something else if you want to. The port that you choose must be made to accept TCP connections. This whole process may involve you doing some (or all) of the following:

    • If you are hosting your server in your own device: go to your router settings, and proceed to open/forward/allow inbound connections into the port. You can typically find instructions for this by finding the brand and model name of your router, and searching "brand + model + port forwarding".
    • If you are hosting your server in an external device (such as a VPS): find its networking settings, and proceed to open/forward/allow inbound connections into the port. You can typically find instructions for this by searching something like this "your VPS + open/forward/allow inbound connections into the port".
    • Go to your operating system firewall settings, and proceed to create a rule to allow inbound connections into the port. You can typically find instructions for this by searching "your operating system + create inbound port rule".
    • Go to your third-party antivirus/firewall software settings (if you have it), and proceed to create a rule to allow inbound connections into the port (if applicable). You can typically find instructions for this by searching "your antivirus + open/forward/allow inbound connections into the port".

Running

  • To launch a server, you may either

    • Double-click start_server.py in your TsuserverDR folder, or...
    • In PowerShell, Command Prompt or your preferred terminal, change directory to your TsuserverDR folder and type python start_server.py, or py -3 start_server.py if you use both Python 2 and 3. For instructions on how to launch any of the above programs or change directory, refer to the second point in the Installing section.

  • If everything was set up correctly, you will see something like this appear:

[2022-11-23T10:20:20]: Starting...
[2022-11-23T10:20:20]: Launching TsuserverDR 5.0.0 (221123a)...
[2022-11-23T10:20:20]: Loading server configurations...
[2022-11-23T10:20:20]: Server configurations loaded successfully!
[2022-11-23T10:20:20]: Starting a nonlocal server...
[2022-11-23T10:20:20]: Server started successfully!
[2022-11-23T10:20:21]: Server should be now accessible from address 192.0.2.0 and port 50000.
  • If you are listing your server in the Attorney Online master server, make sure its details are set up correctly. In particular, make sure that your server name and description are correct, as that is how players will find your server. If everything was set up correctly, you will see something like this appear:
[2022-11-23T10:20:21]: Attempting to connect to the master server at https://servers.aceattorneyonline.com/servers with the following details:
[2022-11-23T10:20:21]: *Server name: My First DR Server
[2022-11-23T10:20:21]: *Server description: This is my flashy new DR server
[2022-11-23T10:20:22]: Connected to the master server.
  • The server will make a single ping to ipify in order to obtain its public IP address. If it fails to do that, it will let you know that, as it means there is probably something wrong with your internet connection and that other players may not be able to connect to your server.
  • Successful connection or getting a spot in the master server list does not imply that your server will be accessible to other players. In particular, you must make sure that your external port in config/config.yaml is open and accepting connections, which usually involves a combination of router and firewall settings. In case of doubt, you can use websites such as Can You See Me to check if your port is visible.
  • To stop the server, press Ctrl+C once from your terminal. This will initiate a shutdown sequence and notify you when it is done. If the shutdown finished successfully, you will see something like this appear:
[2022-11-23T22:23:04]: You have initiated a server shut down.
[2022-11-23T22:23:04]: Kicking 12 remaining clients.
[2022-11-23T22:23:04]: Server has successfully shut down.

  • If you do not see anything after a few seconds of starting a shutdown, you can try spamming Ctrl+C to try and force a shutdown or directly close out your terminal. This is not recommended due to the cleanup process not finishing correctly but it is doable.

  • To restart a server, you can follow the steps outlined above to shut down and then start the server again.

  • In the unlikely event that there is an error during runtime, the server will do its best to print out to your terminal a complete traceback of the error with some additional information, as well as a more complete log file in the logs folder with the error timestamp, to help with debugging. Depending on the nature of the error, the server may or may not be able to continue execution normally after such an error happens.

Updating

  • If you already have a version of TsuserverDR or tsuserver3 installed and wish to update to a new version, you can download the new version and then overwrite your previously existing files. Do note that you do not need to shut down your server before overwriting the files, but you must restart it from console in order for changes to take effect.

    • This process will not overwrite your server configurations inside the config folder, your existing logs inside the logs folder, or the user information inside the storage folder. However, it will overwrite other files including the Python files inside the server folder. Therefore, make sure to save backups of those files before overwriting in case you have modified them and wish to keep an archive of your changes.

  • If you want to update Python itself, you can get the latest Python download from their website here and then follow the instructions under the Installing section in this readme. To check your current version of Python, you can run python on its own and look at the first line. The latest stable major Python release is Python 3.11 as of October 24, 2022.

    • Please follow the installation instructions again even if you had successfully ran a server before, because your new Python installation may be missing libraries that TsuserverDR expects there to exist. You should not need to change any server configuration files though.
    • In general, updating to a Python version beyond what is specified as supported may lead to unstable behavior, so for active servers try to keep your Python version among the ones specifically labeled as supported.

Commands

Additional notes are listed at the end of the command list. Unless otherwise specified, all command arguments have a character limit of 1024 characters, beyond which they will be cut off.

User Commands

  • help "command name"
    • Displays help for a command, or links to the server repository if not given an argument.
  • help_more "command name"
    • Displays extended help for a command, usually significantly longer than what /help does.
  • ambient_info
    • Displays the current area ambient sound effect.
  • area "area number"
    • Moves you to an area by its numerical ID if it is reachable from your own, or displays all areas if not given a number.
  • autoglance
    • Toggles area descriptions (if present) being sent automatically or not when you move areas.
    • No messages will be sent if your area's lights are turned off or you are blind.
  • autopass
    • Toggles enter/leave messages being sent automatically or not to users in your area, including original/target areas.
    • Messages will not be sent if sneaking. Altered messages will be sent if the area's lights are turned off.
  • bg "background"
    • Changes the current background.
  • bilock "area number/name"
    • Changes the passage status (locked/unlocked) between the current area and the given area.
  • bloodtrail_clean
    • Cleans the bloodtrail in the current area.
    • If someone is bleeding in the current area, the cleaning process will fail.
  • bloodtrail_smear
    • Smears the bloodtrail in the current area.
  • charselect
    • Puts you back to the character select screen.
  • chars_restricted
    • Lists all characters that are restricted in the current area.
  • cleardoc
    • Clears the doc url of the current area.
  • cid "ID/char name/edited-to character/showname/char showname/OOC name"
    • Gives you the client ID of the target, or your own client ID if not given an argument.
  • coinflip "call"
    • Flips a coin and returns its result, as well as whatever it is called with (e.g. a prediction, consequences for heads/tails, etc.) if given.
  • currentmusic
    • Displays the current music, who played it, and its source if given in the music list.
  • discord
    • Displays the invite link of the server's Discord server.
  • doc "url"
    • Gives the doc url if blank, updates the doc url otherwise.
  • exit
    • Exits the server.
  • files "ID/char name/edited-to character/showname/char showname/OOC name"
    • Gives a download link set by the target that links to their files, or gives your own download link if not given an argument.
  • files_area
    • Gives the download link of the character files of all players visible in your area.
  • files_set "url"
    • Sets a download link for your character files, or clears it if not given an argument.
  • follow "ID"
    • Starts following a target, provided you were a spectator. If the target changes areas, you will automatically follow them there.
  • g "message"
    • Sends a serverwide message. Fails if the current area disallows sending global messages.
  • getarea
    • Shows the current characters in your area, including their showname if they have set it.
  • getareas
    • Shows all characters in all areas reachable from your own, including their showname if they have set it.
  • hub "hub number"
    • Moves you to the default area of a hub by its numerical ID, or displays all hubs if not given a number.
  • ignore "ID/char name/edited-to character/showname/char showname/OOC name"
    • Marks a target as ignored, so you will no longer receive any IC messages from them.
    • The target is not notified of you marking them as ignored.
  • invite "ID/char name/edited-to character/showname/char showname/OOC name"
    • Adds target to the invite list of your locked area so they may join.
  • kickself
    • Removes all of of the user's clients except the one that used the command.
  • knock "area"
    • Knocks on a reachable area's door, sending an OOC notification to that area. Can be either area ID or name.
  • lights "on/off"
    • Changes the light status in the area to on or off.
    • Areas with lights off will have a dark background, and they disable /getarea(s) and alter /autopass, bleeding, /look and sneaking notifications.
  • lock
    • Locks your area. Prevents normal users from entering.
    • People in the area, including yourself, at the time the area is locked are free to come and go regardless of their status.
  • login "password"
    • Makes you a Moderator.
  • logincm "password"
    • Makes you a Community Manager.
  • logingm "password"
    • Makes you a Game Master.
  • logout
    • Logs you out of the rank you have, if any.
  • look
    • Obtains the description of the current area as well as players inside
  • minimap
    • Lists all areas reachable from the current one.
  • motd
    • Returns the server's Message of the Day.
  • music_list "music list name"
    • Sets your music list to the given one, or restores the original one if not given any.
  • music_list_info
    • Returns your current music list.
  • notecard "content"
    • Sets the content of your notecard.
  • notecard_clear
    • Clears the content of your notecard.
  • notecard_info
    • Returns the content of your notecard.
  • nsd_info
    • Returns details about your NSD.
  • nsd_leave
    • Makes you leave your NSD.
    • You will no longer be able to interact with the NSD, but you will still see messages of the NSD, provided you stay in the NSD area.
    • If you are the last player to leave the NSD, it will be automatically destroyed.
  • online
    • Returns how many players are online.
  • party
    • Creates a party and makes you its leader.
  • party_end
    • Ends your party.
  • party_id
    • Returns your party ID.
  • party_invite "ID/char name/edited-to character/showname/char showname/OOC name"
    • Invites a player in the same area to your party.
  • party_join "party ID"
    • Makes you join a party you were invited to.
  • party_kick "ID/char name/edited-to character/showname/char showname/OOC name"
    • Kicks a player off your party.
  • party_lead
    • Makes you a leader of your party.
  • party_leave
    • Makes you leave your party.
    • Other people in the party are warned of your departure if you are not sneaking.
    • If you are the last player to leave the party, it will be automatically ended.
  • party_members
    • Lists the leaders and regular members of your party.
  • party_uninvite "ID/char name/edited-to character/showname/char showname/OOC name"
    • Revokes an invitation sent to a player to join your player.
  • party_unlead
    • Removes your party leader role.
  • party_whisper "message"
    • Sends an IC private message to everyone in the party.
    • Other people in the area are warned that a whisper has taken place (but not the message content). However, staff members do get message contents, so this command should only be used in RP settings.
    • Messages are limited to 256 characters.
  • peek "area ID"
    • Peeks into an area visible to you, returning information that would have been available had you done /look there.
    • Successful peeks have a 75% chance to notify of the peek having taken place for each player in the target area.
  • ping
    • Returns "Pong", used to check for server connection.
  • play "song.extension"
    • Plays a song, provided the area you are in allows non-staff members to run this command.
    • If the song is within some folders within the client music folder, such folders must be included separated by "/" (e.g. "trial/Trial Start.opus" to play "Trial Start.opus" within the "trial" folder of the client music folder).
  • pm "ID/char name/edited-to character/showname/char showname/OOC name" "message"
    • PMs the target.
  • pos "position"
    • Changes your position in the court.
    • Positions: 'def', 'pro', 'hld', 'hlp', 'jud', 'wit'
  • randomchar
    • Changes your character to a randomly chosen one.
  • randommusic
    • Plays a randomly chosen song from your current music list.
  • reload
    • Reloads your character ini file.
  • roll "number of dice"d"number of faces" "modifiers"
    • Rolls as many dice as given with the given number of faces, and applies modifiers if given. If no arguments are given, rolls one d6.
  • rollp "number of dice"d"number of faces" "modifiers"
    • Same as roll but other non-staff members in the area only are notified that someone rolled.
  • scream "message"
    • Sends an IC message visible to all players in the areas that are set to be able to listen to screams from the current area.
    • Messages are limited to 256 characters.
  • showname "showname"
    • Sets your showname to be the given one, or clears it if not given one.
  • status "ID/char name/edited-to character/showname/char showname/OOC name"
    • Check the custom status of a player
  • status_set "status"
    • Sets a custom status for your character, or clears it if not given an argument.
  • spectate
    • Switches you to a SPECTATOR character.
  • switch "character name"
    • Switches you to the given character, provided no other player is using it in the area and it is not restricted.
  • think "message"
    • Sends an IC message that only you and zone watchers or GMs+ can see.
  • time
    • Displays the server's local time.
  • time12
    • Displays the server's local time in 12 hour format.
  • timer "length" "timer name" "public"
    • Starts a timer of the given length in seconds, which will send a notification to people in the area once it expires.
    • If given a timer name, it will override the default timer name (OOCNameTimer).
    • If public is set to any of the following: "False, false, 0, No, no", the timer details will be hidden from non-staff players.
  • timer_end "timer name"
    • Ends the timer by name, provided it is yours.
  • timer_get "timer name"
    • Obtains the remaining time of the given timer by name, provided it is public, or list all remaining times in all public timers if not given a name.
  • ToD
    • Chooses "Truth" or "Dare" for Truth or Dare minigames.
  • toggle_fp
    • Changes your setting to be in first person mode (your character does not appear to you when you send IC messages) or normal mode (your character does appear). By default it is in normal mode.
  • toggle_fs
    • Changes your setting to have forward sprites mode off (your character sprites are not sent to anyone, everyone sees the last sprites they last saw) or on (your character appears normally). By default it is on.
  • toggle_global
    • Changes your setting to receive global messages. By default it is on.
  • toggle_music_list_default
    • Changes your setting to see which music list to see when no personal music list is active: current hub or server default. By default it is current hub.
  • toggle_pm
    • Changes your setting to receive PMs. By default it is on.
  • toggle_shownames
    • Changes your setting to have the IC messages you receive to include the sender's custom showname. By default it is on.
  • trial_info
    • Returns details about your trial.
  • trial_leave
    • Makes you leave your trial.
    • You will still see messages of the trial, provided you stay in the trial area.
    • If you are the last player to leave the trial, it will be automatically destroyed.
  • unfollow
    • Stops following whoever you were following, provided you were a spectator.
  • unignore "ID/char name/edited-to character/showname/char showname/OOC name"
    • Marks a target as no longer ignored, so you will now receive any IC messages from them.
    • The target is not notified of you marking them as no longer ignored.
  • unilock "area number/name"
    • Changes the passage status (locked/unlocked) from the current area to the given one.
  • uninvite "ID/char name/edited-to character/showname/char showname/OOC name"
    • Removes a target from your locked area's invite list, so that if they leave, they will not be allowed back until the area is unlocked.
  • unlock
    • Unlocks your area, provided the lock came as a result of /lock.
  • version
    • Obtains the current version of the server software.
  • whisper "ID/char name/edited-to character/showname/char showname/OOC name" "message"
    • Sends an IC private message to the target, provided they are in the area.
    • Other people in the area are warned that a whisper has taken place (but not the message content). However, staff members do get message contents, so this command should only be used in RP settings.
    • Messages are limited to 256 characters.
  • zone_global
    • Sends a message to all players in the zone you are in.
  • 8ball "question"
    • Gains insight from the magic 8 ball in response to a question if given one.

GM Commands

GMs can:

  • Bypass area passages and locks.
  • Receive special RP notifications.
  • Use GM commands.
  • ambient "name"
    • Changes the ambient sound effect of your current area.
  • ambient_end
    • Clears the ambient sound effect of your current area.
  • area_list "area list"
    • Sets the area list of your hub.
    • If not given an area list, it will use the default file config/areas.yaml.
  • area_list_info
    • Returns the area list of your hub.
  • autopass "ID"
    • Toggles enter/leave messages being sent automatically or not to users in the current area, including original/target areas, whenever the target moves.
    • Messages will not be sent if sneaking. Altered messages will be sent if the area's lights are turned off.
    • If no ID is given, target is yourself.
  • bilock "area 1", "area 2"
    • Changes the passage locked status (locked/unlocked) between two areas, or from the current area to area 1 if just given one area. Locking a passage in such a way does not change its current visibility to non-GMs.
  • bilockh "area 1", "area 2"
    • Changes the passage locked status (locked/unlocked) between two areas, or from the current area to area 1 if just given one area. Locking a passage in such a way hides it from non-GMs; unlocking it reveals it to non-GMs.
  • blind "ID"
    • Changes the blind status of a target.
    • Blind players will receive no character sprites nor background with IC messages and cannot use "visual" commands such as /look, /getarea, etc.
  • bloodtrail "ID"
    • Changes the bleeding status of a target.
    • If bleeding, they will leave 'blood' in all areas they pass through, and send OOC notifications to players in the area and those who join indicating their status. Sneaking and bleeding players send altered notifications.
  • bloodtrail_clean "area 1", "area 2", ...
    • Cleans the blood trails in the given areas (or the current one if not given any areas).
    • If someone is bleeding in any of the given areas, the cleaning process will fail.
  • bloodtrail_list
    • Lists all areas that have bloodtrails in them, and where they lead to if appropiate.
  • bloodtrail_set "area 1", "area 2", ...
    • Sets the current area to have bloodtrails leading to the listed areas. If no areas are given, the area is set to have an unconnected pool of blood.
  • bloodtrail_smear "area 1", "area 2", ...
    • Smears the blood trails in the given areas (or the current one if not given any areas).
  • bg_list "list"
    • Sets the background list of your hub.
    • If not given a background list, it will use the default file config/backgrounds.yaml.
  • bg_list_info
    • Returns the background list of your hub.
  • bg_period "period name" "bg name"
    • Sets the special background to be displayed in the area whenever there is a clock in the area with the given period.
  • bg_period_end "period name"
    • Removes the special background to be displayed in the area whenever there is a clock in the area with the given period, so that it instead displays the normal background of the area.
  • can_passagelock
    • Changes the current area's setting to allow non-staff members to change passages starting in the area with /bilock or /unilock. By default area setting is indicated in your hub's area list.
  • can_rollp
    • Changes the current area's setting to allow non-staff members to do /rollp. By default area setting is indicated in your hub's area list.
  • can_rpgetarea
    • Changes the current area's setting to allow RP users to use /getarea. By default area setting is indicated in your hub's area list.
  • can_rpgetareas
    • Changes the current area's setting to allow RP users to use /getareas. By default area setting is indicated in your hub's area list.
  • char_list "list"
    • Sets the character list of your hub.
    • If not given a character list, it will use the default file config/characters.yaml.
  • char_list_info
    • Returns the character list of your hub.
  • char_restrict "character name"
    • Changes the restricted status of a character in the current area.
    • If a character is restricted, only GMs and above can use the character in the current area.
  • charlog "ID"
    • Lists all character changes (including iniswaps and character name changes) a target has gone through since connecting, including the time they were changed.
  • clock "area range start" "area range end" "hour length" "hour start" "hours in a day"
    • Sets up a day cycle that, starting from the given hour, will tick one hour every given number of seconds (main hour length) and provide a time announcement to a given range of areas.
    • Hours go from 0 inclusive to the number of hours in a day given exclusive, or 0 to 23 inclusive if not given a number of hours in a day.
  • clock_end "ID"
    • Ends the day cycle initiated by the target or yourself if not given a target.
  • clock_pause "ID"
    • Pauses the day cycle initiated by the target or yourself if not given a target.
  • clock_period "name" "hour length" "hour start"
    • Initializes a clock period that starts at the given hour for your day cycle.
    • Whenever the clock ticks into the period, players in the clock range will be ordered to switch to that time of day's version of their theme.
    • If only two arguments are given, the second argument is assumed to be hour start, and hour length is the main hour length.
    • Clock period names are automatically made all lowercase.
  • clock_period_end "name"
    • Deletes a clock period for your day cycle.
  • clock_set "hour length" "hour"
    • Modifies the hour length and current hour of your day cycle without restarting it. This is the way to move the day cycle out of unknown time if needed as well.
    • Acts just like doing /clock again, but does not erase already set periods.
  • clock_set_hours "hours in day"
    • Modifies the number of hours in your day cycle.
  • clock_unknown
    • Sets the time of your day cycle to be unknown, a special time where hours do not tick.
    • Players in the clock range will be ordered to switch to the unknown time of day version of their theme.
  • clock_unpause "ID"
    • Unpauses the day cycle initiated by the target or yourself if not given a target.
  • cure "ID" "initials of effects"
    • Clears the given effects from the target, as well as any poison that would have inflicted those effects.
  • deafen "ID"
    • Changes the deafened status of a target.
    • Deafened players will be unable to read IC messages properly or receive other audio cues from commands such as /knock, /scream, etc.
  • dicelog "ID"
    • Obtains the last 20 rolls from a target, or your last 20 rolls if not given a target.
  • dicelog_area "area"
    • Obtains the last 20 rolls from an area by ID or name, or the last 20 rolls of your area if not given one.
  • dj_list "music list"
    • Sets the music list of your hub.
    • If not given a music list, it will use the default file config/music.yaml.
  • dj_list_info
    • Returns the music list of your hub.
  • follow "ID"
    • Starts following a target. If the target changes areas, you will automatically follow them there.
  • gag "ID"
    • Changes the gagged status of a target.
    • Gagged players will be unable to talk IC properly or use other talking features such as /scream.
  • getarea "area"
    • Shows the current characters in the given area, or your area if not given any.
  • globalic "area range start", "area range end"
    • Sends subsequence IC messages to the area range described above. Can take either area IDs or area names.
  • globalic_pre "prefix"
    • Ensures only IC messages that start with the prefix are sent to the preestablished area range through /globalic (otherwise, just to the current area), or removes the need for a prefix if not given one.
  • gmself
    • Logs all opened multiclients as GM.
  • guide "ID/char name/edited-to character/showname/char showname/OOC name" "message"
    • Sends an IC private 'guiding' message to the target.
    • Unlike /whisper, other people in the area are not warned that a whisper has taken place. However, staff members do get message contents, so this command should only be used in RP settings.
    • Messages are limited to 256 characters.
  • handicap "ID" "length" "name" "announce if over"
    • Sets a movement handicap on a client by ID so that they need to wait a set amount of time in seconds between changing areas.
    • If name is given, the handicap announcement will use it as the name of the handicap.
    • If announce if over is set to any of "False, false, 0, No, no", no announcements will be sent to the player indicating that they may now move areas.
    • If the player had an existing handicap, it will be overwritten with this one.
  • hub_end
    • Deletes your hub.
  • hub_info
    • Returns information about your hub.
  • hub_password "password"
    • Changes the password of your hub.
  • hub_password_info
    • Gets the password of your hub.
  • hub_rename "name"
    • Changes the name of your hub to the given name, or clears it if not given any.
  • iclock
    • Changes the IC lock status of the current area.
    • If the area has an IC lock, only GMs and above will be able to send IC messages.
  • iclock_bypass "ID"
    • Grants/revokes of an IC lock bypass to the target.
    • Targets with an IC lock bypass may talk in an area whose IC chat is locked. This effect disappears automatically as soon as they move area or their IC chat is unlocked.
  • judgelog "area"
    • Lists the last 20 judge actions performed in the given area (or current area if not given).
    • Each entry includes the time of execution, client ID, character name, client IPID and the judge action performed.
  • lights "on/off" "area 1" "area 2" ...
    • Changes the light status in the given areas to on or off, or in the current area if not given any.
    • Areas with lights off will have a dark background, and they disable /getarea(s) and alter /autopass, bleeding, /look and sneaking notifications.
  • look_clean "area 1", "area 2", ...
    • Restores the default area descriptions of the given areas by ID or name, or the current area if not given any.
  • look_list
    • Lists all areas that have custom descriptions.
  • look_set "description"
    • Sets the area's description to the given one, or restores the default one if not given.
  • lurk "length"
    • Sets the area's lurk callout timer to the given length in seconds, so players who remain silent for that long are called out in OOC.
  • lurk_end
    • Ends the area's lurk callout timer if there is one active.
  • make_gm "ID"
    • Makes the target a GM, provided the target is a multiclient of the player.
  • mindreader "ID"
    • Changes a player's ability to see thoughts of other players made with /think. By default it is off.
  • multiclients "ID"
    • Lists all the clients opened by a target and the areas they are in.
  • notecard_check
    • Returns the contents of all notecards set by players in your current area.
  • notecard_clear "ID"
    • Clears the content of a player's notecard by ID, or your own notecard if not given one.
  • notecard_clear_area
    • Clears the content of the notecards of all players in your current area.
  • notecard_list
    • Returns the content of all notecards currently set by players in the server.
  • notecard_reveal
    • Reveals the contents to all players in the area of all notecards of all players in your current area.
  • notecard_reveal_count
    • Tallies the contents of all notecards of players in the area and reveals the count to all players in your current area.
    • This does not reveal the people who wrote particular notecards.
  • noteworthy
    • Changes the noteworthy status of the area.
  • noteworthy_info
    • Returns the noteworthy status and noteworthy text of an area.
  • noteworthy_set "text"
    • Changes the noteworthy text of the area to the given text, or a default one if not given any.
    • Noteworthy text can be changed independently of the noteworthy status of an area.
  • nsd "time"
    • Starts an NSD part of your current trial with all players in the area part of your trial, making you leader of the NSD.
    • The NSD will have a given time limit in seconds, or no time limit if not given a time. Debates with a time limit will be automatically halted once the timer runs out.
    • Nonplayers may not talk IC while an NSD is taking place.
  • nsd_accept
    • Accepts a break from a player who shot a bullet during looping or recording mode for the NSD you lead, restoring 0.5 influence and ending the NSD.
  • nsd_add "ID/char name/edited-to character/showname/char showname/OOC name"
    • Adds a player part of your current trial to your NSD.
  • nsd_autoadd
    • Toggles players who are added to the trial of the NSD being automatically added to the NSD on or off.
    • By default it is the same as the trial's behavior when a user enters an area part of the trial (refer to /trial_autoadd).
  • nsd_end
    • Ends an NSD you lead.
  • nsd_join "nsdID"
    • Enroll in the NSD in your trial occurring your area.
  • nsd_lead
    • Makes you a leader of your NSD.
  • nsd_loop
    • Sets the NSD you lead to be in looping mode: messages saved during recording mode will be played Danganronpa style one after the other until a bullet is shot or all messages are seen.
  • nsd_kick "ID/char name/edited-to character/showname/char showname/OOC name"
    • Kicks a player off the NSD you lead.
  • nsd_pause
    • Pauses the NSD you lead, putting it in intermission mode.
  • nsd_reject
    • Rejects a break from a player who shot a bullet during looping or recording mode for the NSD you lead, draining 1 influence from them.
    • The NSD will not end or resume automatically, you will be prompted to decide what to do.
  • nsd_resume
    • Sets the NSD you lead to be in the mode prior to intermission mode: if it was recording mode, previously recorded messages will be saved and future messages will be saved on top of the older ones; if it was looping, messages will be played from the first one.
  • nsd_unlead
    • Removes your NSD leader role.
  • paranoia "player ID" "paranoia level"
    • Sets the player paranoia level (by default 2) of a player to the new level.
    • Paranoia level is a number from -100 to 100, and is internally added to the paranoia level of the player's current zone (if any) to determine the probability they occasionaly get phantom peek messages.
  • paranoia_info "player ID"
    • Gets the player paranoia level of a player.
  • party_end "party ID"
    • Ends a party.
  • party_join "party ID"
    • Makes you join a party, even if you were not invited to it.
  • party_list
    • Lists all active parties in the server, as well as some of their details.
  • passage_clear "area range start", "area range end"
    • Clears passage locks that start in the areas in the given area range, or just the ones in the current area if not given a range.
  • passage_restore "area range start", "area range end"
    • Restores passage locks that start in the areas in the given area range to their original status, or just the ones in the current area if not given a range.
  • play "song.extension"
    • Plays a song, even if not in the server music list.
    • If the song is within some folders within the client music folder, such folders must be included separated by "/" (e.g. "trial/Trial Start.opus" to play "Trial Start.opus" within the "trial" folder of the client music folder).
  • poison "ID" "initials of effects" "length"
    • Applies a poison to the target that will inflict them in the given length of time in seconds the given effects.
  • pos_force "position" "ID"
    • Changes the IC position of a target by ID to the given one, or the one of all players in an area if not given a target.
  • refresh
    • Reloads your hub's character, music and background lists.
  • reveal "ID"
    • Reveals a target if they were previously sneaking.
    • Also restores their formerly assigned handicap if they had one that was shorter than the server's automatic sneaking handicap.
    • If no ID is given, target is yourself.
  • rplay "song.extension"
    • Plays a song in all areas reachable from the current one.
    • If the song is within some folders within the client music folder, such folders must be included separated by "/" (e.g. "trial/Trial Start.opus" to play "Trial Start.opus" within the "trial" folder of the client music folder).
  • scream_range
    • Returns the areas that can listen to screams sent from the current area.
  • scream_set "area"
    • Changes the reachable status from screams sent from the current area to the given area.
  • scream_set_range "area 1", "area 2", ...
    • Sets the current area's scream range to be the areas listed.
    • The special keyword means all areas in the server should be able to listen to screams from the current area.
    • The special keyword <REACHABLE_AREAS> means all areas reachable from the current area.
  • shoutlog "area"
    • Lists the last 20 shouts sent in the given area, or from the current area if not given.
    • Each entry includes the time of execution, client ID, character name, client IPID, the shout ID and the IC message sent alongside.
  • showname_history "ID"
    • Lists all shownames a target has gone through since connecting, including the time they were changed.
  • showname_set "ID" "showname"
    • Sets a target's showname to be the given one, or clears it if not given one.
  • sneak "ID"
    • Sets a target to be sneaking if they were visible.
    • If the target was subject to a handicap shorter than the server's automatic sneak handicap length, they will be imposed this handicap.
    • If no ID is given, target is yourself.
  • sneakself
    • Sneaks all opened multiclients that can be sneaked.
  • summon "ID" "area number"
    • Summons target from their area to the intended area, or to your area if not given an area, and remove them from the invite list of their old area.
  • st "message"
    • Sends a message to all active staff members.
  • status_set_other "ID/char name/edited-to character/showname/char showname/OOC name" "status"
    • Sets the player status of another user, or clears it if not given a status.
  • switch "character name"
    • Switches you to the given character, provided no other player is using it in the area.
  • toggle_allpasses
    • Changes your ability to receive autopass notifications from players that do not have autopass on. By default it is off.
  • toggle_allrolls
    • Changes your ability to receive /roll and /rollp results from other areas. By default it is off.
  • transient "ID"
    • Changes a player's ability to ignore passage locks and thus access all areas from any given area. By default it is off.
  • trial
    • Starts a trial with all players in the area, making you leader of the trial.
  • trial_add "ID/char name/edited-to character/showname/char showname/OOC name"
    • Adds a player to a trial you lead.* nsd_autoadd
  • trial_autoadd
    • Toggles users who enter an area of the trial being automatically added to the trial on or off.
    • By default it is off.
  • trial_end
    • Ends a trial you lead, as well as any minigames that may have be taking place in the trial.
  • trial_focus "ID/char name/edited-to character/showname/char showname/OOC name" "number"
    • Sets the focus level of a player in your trial to the given value.
    • Number must be an integer from 0 to 10.
  • trial_influence "ID/char name/edited-to character/showname/char showname/OOC name" "number"
    • Sets the influence level of a player in your trial to the given value.
    • Number must be an integer from 0 to 10.
  • trial_info
    • Returns details about your trial.
    • If a leader of your trial, also includes the influence and focus values of all trial players.
  • trial_join "trial ID"
    • Enrolls in the trial by ID occurring in your area.
  • trial_lead
    • Makes you a leader of your trial.
  • trial_kick "ID/char name/edited-to character/showname/char showname/OOC name"
    • Kicks a player off your trial.
  • trial_unlead
    • Removes your trial leader role.
  • unfollow
    • Stops following whoever you were following.
  • unignore "ID/char name/edited-to character/showname/char showname/OOC name"
    • Marks a target as no longer ignored, so you will now receive any IC messages from them.
    • The target is not notified of you marking them as no longer ignored.
  • unglobalic
    • Stops sending subsequent IC messages to the area range specified in a previous /globalic command.
  • unhandicap "ID"
    • Removes movement handicaps on a target.
  • unilock "area 1", "area 2"
    • Changes the passage status (locked/unlocked) from area 1 to area 2 if given two areas, or from the current area to area 1 if just given one area. Locking a passage in such a way does not change its current visibility to non-GMs.
  • unilockh "area 1", "area 2"
    • Changes the passage status (locked/unlocked) from area 1 to area 2, or from the current area to area 1 if just given one area. Locking a passage in such a way hides it from non-GMs; unlocking it reveals it to non-GMs.
  • uninvite "ID/char name/edited-to character/showname/char showname/OOC name"
    • Removes a target from your locked area's invite list, so that if they leave, they will not be allowed back until the area is unlocked.
  • unlock
    • Unlocks an area, provided the lock came as a result of /lock.
  • whereis "ID"
    • Obtains the area a target is.
  • whois "ID/char name/showname/OOC name"
    • Obtains a lot of properties of the target.
  • zone "area range start", "area range end"
    • Creates a zone involving the area range given above, just the given area if given one parameter, or just the current area if not given a parameter.
    • You are automatically set to watch the zones you create like this.
  • zone_add "area"
    • Adds an area by name or ID to the zone you are watching.
  • zone_ambient "name"
    • Changes the ambient sound effect of all areas of the zone you are watching.
  • zone_ambient_end
    • Clears the ambient sound effect of all areas of the zone you are watching.
  • zone_autoglance
    • Changes the autoglance status of the zone you are watching. If turned on, turns autoglance on for players in an area part of a zone and players that later join; otherwise, it turns it off for players in an area part of the zone
  • zone_autopass
    • Changes the autopass status of the zone you are watching. If turned on, turns autopass on for players in an area part of a zone and players that later join; otherwise, it turns it off for players in an area part of the zone
  • zone_end
    • Ends the zone you are watching.
  • zone_handicap "length" "name" "announce if over"
    • Sets a movement handicap on all clients part of the zone (now or later) you are watching so that they need to wait a set amount of time in seconds between changing areas.
    • Players who are subject to a zone handicap that then leave the zone will have their handicap removed.
    • If name is given, the handicap announcement will use it as the name of the handicap.
    • If announce if over is set to any of "False, false, 0, No, no", no announcements will be sent to the player indicating that they may now move areas.
    • If a player in the zone had an existing handicap, it will be overwritten with this one.
  • zone_handicap_affect "ID"
    • Makes the player subject to the zone's movement handicap.
    • This is useful if the player lost the zone handicap because another handicap was removed.
  • zone_iclock
    • Applies the same lock/unlock status to all areas part of the zone.
  • zone_info
    • Lists brief description of the zone you are watching, as well as lists all players in areas part of the zone.
  • zone_lights "on/off"
    • Changes the light status of every area in a zone you are watching to on or off.
  • zone_list
    • Lists all active zones in the server, as well as some of their details.
  • zone_mode "mode"
    • Sets up the gamemode of your zone, or clears it if not given one.
    • Players in an area part of the zone will be ordered to switch to that gamemode's version of their theme.
    • Gamemodes are automatically made all lowercase.
  • zone_paranoia "paranoia level"
    • Sets the zone paranoia level (by default 2) of the zone you are watching to the new level.
    • Paranoia level is a number from -100 to 100, and is internally added to a player paranoia's level to determine the probability percentage they occasionaly get phantom peek messages.
  • zone_paranoia_info
    • Gets the zone paranoia level of the zone you are watching.
  • zone_play
    • Plays a track in all areas in the zone you are watching.
    • If the song is within some folders within the client music folder, such folders must be included separated by "/" (e.g. "trial/Trial Start.opus" to play "Trial Start.opus" within the "trial" folder of the client music folder).
  • zone_remove "area"
    • Removes an area by name or ID from the zone you are watching.
  • zone_tick "chat tick rate"
    • Sets the chat tick rate in milliseconds in your zone. All players in an area part of a zone will render IC messages with this chat tick rate.
  • zone_tick_remove
    • Removes the chat tick rate in your zone. All players in an area part of a zone will render IC messages with their own chat tick rate.
  • zone_unhandicap
    • Removes the zone's movement handicap.
  • zone_unwatch
    • Makes you stop watching the zone you were watching.
  • zone_watch "zone"
    • Makes you start watching a zone by its ID.

Community Manager Commands

  • blockdj "ID/IPID"
    • Mutes the target from changing music.
  • charlog "ID/IPID"
    • Lists all character changes (including iniswaps and character name changes) a target has gone through since connecting, including the time they were changed.
  • cleargm "ID"
    • Logs out the target from their GM rank, or all GMs in the server if not given a target.
  • g "message"
    • Sends a serverwide message, even if the current area disallows sending global messages.
  • getarea
    • Shows the current characters in your area as well as their IPIDs.
  • getareas
    • Shows all characters in all areas of the server as well as their IPIDs.
  • glock
    • Changes the global chat lock status of the server.
    • If the server has its global chat locked, only CMs and above can use /g and /zone_global.
  • handicap "ID/IPID" "length" "name" "announce if over"
    • Sets a movement handicap on a client by ID or IPID so that they need to wait a set amount of time in seconds between changing areas.
    • If name is given, the handicap announcement will use it as the name of the handicap.
    • If announce if over is set to any of "False, false, 0, No, no", no announcements will be sent to the player indicating that they may now move areas.
  • hub_create "name"
    • Creates a new hub with given name, or with a default generated name otherwise.
  • hub_end "hub"
    • Deletes the hub by numerical ID, or your hub if not given any.
  • hub_info "hub"
    • Returns information about the hub by numerical ID, or your hub if not given any.
  • hub_password_info "hub"
    • Returns the password of the hub by numerical ID, or your hub if not given any.
  • hub_rename "name"
    • Changes the name of your hub to the given name, or clears it if not given any.
  • invite "ID/IPID/char name/edited-to character/showname/char showname/OOC name"
    • Adds target to the invite list of your area.
  • kick "ID/IPID"
    • Kicks the target from the server.
  • make_gm "ID"
    • Makes the target a GM.
  • multiclients "ID/IPID"
    • Lists all the clients opened by a target and the areas they are in.
  • mute "ID/IPID"
    • Mutes the target from all IC actions.
  • ooc_mute "OOC name"
    • Mutes the target from all OOC actions.
  • ooc_unmute "OOC name"
    • Unmutes the target.
  • reveal "ID/IPID"
    • Reveals a target if they were previously sneaking.
    • Also restores their formerly assigned handicap if they had one that was shorter than the server's automatic sneaking handicap.
  • showname_history "ID/IPID"
    • Lists all shownames a target has gone through since connecting, including the time they were changed.
  • showname_set "ID/IPID" "showname"
    • Sets a target's showname to be the given one, or clears it if not given one.
  • sneak "ID/IPID"
    • Sets a target to be sneaking if they were visible.
    • If the target was subject to a handicap shorter than the server's automatic sneak handicap length, they will be imposed this handicap.
  • summon "ID/IPID" "area number"
    • Summons target from their area to the intended area, or to your area if not given an area, and remove them from the invite list of their old area.
  • transient "ID/IPID"
    • Changes a player's ability to ignore passage locks and thus access all areas from any given area. By default it is off.
  • unblockdj "ID/IPID"
    • Allows the target to change music again.
  • unhandicap "ID/IPID"
    • Removes movement handicaps on a target.
  • uninvite "ID/IPID/char name/edited-to character/showname/char showname/OOC name"
    • Removes a target from your locked area's invite list, so that if they leave, they will not be allowed back until the area is unlocked.
  • unmute "ID/IPID"
    • Unmutes the target from the IC chat.
  • whereis "ID/IPID"
    • Obtains the area a target is.
  • whois "ID/IPID/char name/showname/OOC name"
    • Obtains a lot of properties of the target, including HDID and IPID.
  • zone_end "zone"
    • Deletes a zone by its ID, or the zone you are watching if not given a zone.

Moderator Commands

  • announce "message"
    • Sends a serverwide announcement.
  • ban "IPID"/"IP"
    • Bans the specified IPID/IP (hdid is linked to ipid so all bans happen at the same time).
  • banhdid "HDID"
    • Bans the specified HDID (hdid is linked to ipid so all bans happen at the same time).
  • bglock
    • Toggles the background lock in the current area.
  • can_iniswap
    • Changes the iniswap status in the current area.
    • Even if iniswap at all is forbidden you can configure all-time allowed iniswaps in iniswaps.yaml
  • charselect "ID"
    • Kicks a player back to the character select screen. If no ID was entered then target yourself.
  • defaultarea "area number"
    • Sets the given area to be the area all future players join when they connect to the server.
  • disemvowel/disemconsonant/remove_h "ID/IPID"
    • Removes the respective letters from everything said by the target
  • gimp "ID/IPID"
    • Gimps a target so that all their IC messages are replaced with a selection of preset messages.
  • gm "message"
    • Sends a serverwide message with mod tag.
  • lights "on/off" "area 1" "area 2" ...
    • Changes the light status in the given areas to on or off, or in the current area if not given any; even if the background of the area is locked.
    • Areas with lights off will have a dark background, and they disable /getarea(s) and alter /autopass, bleeding, /look and sneaking notifications.
  • lm "message"
    • Sends an area OOC message with mod tag.
  • modlock
    • Locks your area. Prevents GMs, CMs and normal users from entering.
  • showname_freeze
    • Changes the ability of non-staff members of being able to change or remove their own shownames.
  • showname_nuke
    • Clears all shownames from non-staff members.
  • switch "character name"
    • Switches you to the given character. If some other player in the area is using it, they will be forced to the character select screen.
  • unban "IPID/IP"
    • Unbans the specified IPID/IP.
  • unbanhdid "HDID"
    • Unbans the specified HDID.
  • undisemvowel/undisemconsonant/ungimp/unremove_h "ID/IPID"
    • Undoes correlating command.
  • unlock
    • Unlocks an area, provided the lock came as a result of /lock or /modlock.

Debug commands

  • exec "command"
    • (DEBUG) Executes the given command as a Python instruction. Requires turning on in server/commands.py before using.
  • dump
    • (DEBUG) Prepares a server dump containing debugging information about the server and saves it in the server log files.
  • lasterror
    • (DEBUG) Obtains the latest uncaught error as a result of a client packet. This message emulates what is output on the server console.
  • reload_commands
    • (DEBUG) Reloads the server/commands.py file.

Deprecated commands and aliases

Commands marked with (D) are marked as deprecated. They will continue to serve their original purpose as usual for at least three months after the stated date. If an alternative command name is given to a deprecated command, please try and use that command instead.

Commands without (D) are aliases to commands and can be freely used (subject to the parent command's conditions).

Everyone

  • huddle: Same as /party_whisper.
  • pw: Same as /party_whisper.
  • sa: Same as /getarea.
  • sas: Same as /getareas.
  • shout: Same as /scream.
  • showname_list: Same as /getareas.
  • unsneak: Same as /reveal.
  • yell: Same as /scream.
  • zg: Same as /zone_global.
  • zi: Same as /zone_info.
  • fa: Same as /files_area.
  • l: Same as /look.
  • forcepos: Same as /pos_force.
  • showname_area: Same as /getarea.
  • showname_areas: Same as /getareas.
  • ga: Same as /getarea.
  • gas: Same as /getareas.

GM+

  • area_kick: Same as /summon.
  • loginrp: Same as /logingm.
  • slit: Same as /bloodtrail.
  • unsneak: Same as /reveal.

Notes

  • Note 1: the commands may refer to the following identifiers for a player:
    • Character Name: the folder name of the character the player is using, also the name that appears in /getarea.
    • HDID: the hard drive ID of the player, accessible through /whois (requires community manager rank).
    • ID: number in brackets [] in /getarea.
    • IPID: number in parentheses () in /getarea (requires community manager rank).
    • IP: the IP address of the player.
    • OOC Name: the username of the player in the OOC chat.
  • Note 2: some commands include commas (,) between the parameters. If that is the case, the command expects you to actually use the commas between the parameters. If for whatever reason your parameter also has a comma followed by a space, you can include it by using ,\ (so 'Hello, world' becomes 'Hello,\ world').
  • Note 3: additional documentation for the commands can be found in config/commands.py and consulting the docstrings. For example, to get additional information for /help, you would look for ooc_cmd_help and look for the associated text.

License

This server is licensed under the AGPLv3 license. In short, if you use a modified version of TsuserverDR, you must distribute its source licensed under the AGPLv3 as well, and notify your users where the modified source may be found. The main difference between the AGPL and the GPL is that for the AGPL, network use counts as distribution. If you do not accept these terms, you should use serverD, which uses GPL rather than AGPL.

See the LICENSE file for more information.

About

A Python-based server for Danganronpa Online

www.danganronpaonline.com

Resources

Readme

License

AGPL-3.0 license
Activity

Stars

2 stars

Watchers

4 watching

Forks

8 forks
Report repository

Releases 29

5.0.0-post3 Latest
Dec 19, 2022
+ 28 releases

Packages

No packages published

Languages

  • Python 100.0%