All the files and projects from my talk at NDC London 2022 about using C# on Meadow IoT boards.
You can get the Meadow boards I used direct from Wilderness Labs:
Store - https://store.wildernesslabs.co
Docs - http://developer.wildernesslabs.co/Meadow/Getting_Started/
for setting up your new board the instructions on the Getting started sometimes cause issues so use this blog post instead as it's the most stable way to set-up a new board.
https://blog.wildernesslabs.co/b6-2-is-live-with-new-meadow-os-improvements-and-m-f-drivers/
The robot are files can be used to print your very own to move around this is best printed in PLA and you just need SG90 servo's like these - SG90 Servo
The Robot arm design is a simplified version of this project from Thingyverse to enable quicker and simpler print and build - https://www.thingiverse.com/thing:1684471
If you want to know how to build the Robot arm to my son shows how it's done here on YouTube - https://www.youtube.com/watch?v=Gk84dhThmjY
As the end of my talk was rudely interrupted by the Police, fire alarms and car bombs you would have missed how to set-up an Azure IoT Hub.
The docs are here: https://docs.microsoft.com/azure/iot-hub/?WT.mc_id=IoT-MVP-5003764
and I have a blog post here that explains it for the ESP32 and NanoFramework but the process is very similar - https://www.cliffordagius.co.uk/post/connectesp32toiothub/