Update ava to the latest version 🚀

[greenkeeper]

The devDependency ava was updated from 1.4.1 to 3.0.0.

This version is not covered by your current version range.

If you don’t accept this pull request, your project will work just like it did before. However, you might be missing out on a bunch of new features, fixes and/or performance improvements from the dependency update.

---

Publisher: novemberborn
License: MIT

Release Notes for 3.0.0

We're proud to introduce AVA 3! 🚀

When we began AVA, JavaScript was very different. Most syntax you find familiar today was not supported by Node.js. Instead we relied on Babel to support that syntax before it made its way to Node.js itself.

These days most new stage-4 syntax is adopted quickly. It's often not necessary to transpile anything. Therefore we're removing our built-in Babel support from AVA itself.

Without Babel you'll have to resort to using require() functions in your JavaScript files. But, you say, Node.js 13 supports ECMAScript Modules!

Well, we're getting there. For a start, AVA now also looks for .cjs files. And .mjs files are recognized too, but can't be loaded just yet. This also impacts ava.config.js files. If you'd like to help out delivering full .mjs support check out the issues in the ESM support project.

Removing Babel allowed us to simplify how test files are selected. Likely non-test files, inside "fixture" or "helper" directories are ignored. The same for files that are inside an underscore-prefixed directory. We've made some other breaking changes in this area so please do read the full release notes.

You can again pass glob patterns on the CLI. However these now filter the test files that AVA already selected based on the configuration. In other words you can't run files that wouldn't be run by invoking npx ava.

AVA now interrupts your tests if there's no progress for 10 seconds. Use the timeout configuration or --timeout CLI option to change this.

New features

Built-in debug mode

You can now debug individual test files using the V8 Inspector:

npx ava debug test.js

Connect to the debugger with Chrome DevTools. Or set up a debugger in VSCode.

Configurable Node.js arguments

You can now configure the arguments passed to Node.js itself when AVA starts its worker processes. Use the nodeArguments configuration or combine with the --node-arguments CLI option.

All breaking changes

Supported Node.js versions

We now support Node.js 10, 12 and 13. The minimal versions are 10.18.0, 12.14.0 and 13.5.0 respectively.

Removing Babel

Utilize Babel with AVA by installing our @ava/babel package and then enabling Babel by setting babel: true in the AVA configuration. Having this as a separate package means it can evolve independently.

The compileEnhancements setting has been moved into the babel configuration. Consequently, the t.assert() assertion will only print its detailed information when you use Babel. And we won't be able to catch typical mistakes with t.throws() as well as we could before.

The ava/stage-4 preset is now available from @ava/babel/stage-4. Our old @ava/babel-preset-transform-test-files and @ava/babel-preset-stage-4 packages are no longer maintained and not installed with AVA itself.

ECMAScript Module Support

AVA now also looks for .cjs and .mjs test files. That said, .mjs files cannot be loaded just yet.

Also, when you add "type": "module" , AVA would really like to treat .js files as ECMAScript Modules, but can't just yet.

Similarly,ava.config.cjs configuration files are now supported. ava.config.mjs files not just yet.

With AVA 2, we loaded ava.config.js files using the esm package. To avoid confusion between the different module formats we now only support export default statements. No import, no __filename. Configuration files that have dependencies should be written as a .cjs file for now.

Configuration files can only have .cjs, .js and .mjs extensions.

The remaining work is tracked in the ESM support project.

File selection

When you use the default configuration AVA will no longer select files matching the following glob patterns:

• **/__tests__/**/__helper__/**/*
• **/__tests__/**/__helpers__/**/*
• **/__tests__/**/__fixture__/**/*
• **/__tests__/**/__fixtures__/**/*
• **/test/**/helper/**/*
• **/test/**/helpers/**/*
• **/test/**/fixture/**/*
• **/test/**/fixtures/**/*
• **/tests/**/helper/**/*
• **/tests/**/helpers/**/*
• **/tests/**/fixture/**/*
• **/tests/**/fixtures/**/*

Additionally, when a file has a parent directory that starts with a single underscore, it can never be a test file.

test.js files are only selected if they're next to the package.json file, or inside top-level src and source directories.

We've removed the configuration of helpers. Previously, files selected by the helpers glob patterns were never considered test files. Now that this configuration is no longer supported you'll need to ensure the files patterns exclude your helper files. If you're using Babel, you can configure the compilation of additional files .

The sources configuration has also been removed. Instead, use the ignoredByWatcher configuration. Changes to files matched by these glob patterns will not cause the watcher to rerun tests.

Negated sources patterns must be used without the negation in ignoredByWatcher:

 export default {
-  sources: ['!examples/**/*']
+  ignoredByWatcher: ['examples/**/*']
 }

CLI changes

Internally we've replaced meow by yargs. We're not expecting things to break because of this, but you never know.

Resetting the cache

The --reset-cache argument has been replaced by a proper reset-cache command:

npx ava reset-cache

File selection (again!)

AVA again accepts glob patterns via the CLI:

npx ava '**/api/**/*'

The way this work is that AVA first finds all test files, according to the configuration, and then filters to select just the files that also match the glob patterns passed via the CLI.

You can still pass paths to specific files:

npx ava src/api/test/my-api-test.js

However unlike with AVA 2, you can no longer specify test files that aren't already selected by AVA's configuration.

t.throws() and t.throwsAsync() assertions

The second argument passed to these assertions must now be an expectation object. You can no longer pass the expected constructor, error message or regular expression.

Other breaking changes

• Support for old esm versions has been removed.
• We've set a default test timeout of 10 seconds. This means that if no test results are received for 10 seconds, AVA forces its worker processes to quit.
• The NODE_PATH environment variable is no longer rewritten to ensure values are absolute paths.
• AVA longer fakes the TTY in worker processes.

Other changes

• We've simplified how we identify observables. Any object returned by a test implementation that has a subscribe function is assumed to be an observable. AVA's type definition has been updated accordingly.
• The TAP reporter now reports hook failures as test failures.
• We've added an example of module path mapping to our TypeScript recipe.
• We've added a Selenium WebDriver JS recipe.

All changes

v2.4.0...v3.0.0

Thanks

Thank you @tymfear, @HeathNaylor, @grnch, @alexdrans, @MoppetX, @jimmywarting, @micaelmbagira, @aptester, @theashraf, @sramam and @maximelkin. We couldn't have done this without you!

Commits

The new version differs by 164 commits.

• b4cfc8d 3.0.0
• 776788f Ship v3 🎉
• 0d11ff7 More issue template tweaks
• 9983976 Update various contributing documents and GitHub configuration
• 5a33572 Fix fail-fast interrupt test
• 61e0d05 Fix VSCode debugging instructions
• 630aac3 Fix remaining AVA link
• 5c8bcec Fix AVA link in snapshot reports
• 7b20f6c Allow Node arguments to be configured
• ad27246 3.0.0-beta.2
• ae948d8 Lowercase CLI argument description asides
• ac8c852 Update dependencies
• 2bd890f Disable timeouts in debug mode
• 15d73ca Make console & process globals available to ava.config.js files
• efa8635 Fix patterns and unpin picomatch

There are 164 commits in total.

See the full diff

---

FAQ and help

There is a collection of frequently asked questions. If those don’t help, you can always ask the humans behind Greenkeeper.

---

Your Greenkeeper bot 🌴

[greenkeeper]

• The devDependency ava was updated from 1.4.1 to 3.1.0.

Update to this version instead 🚀

Release Notes for 3.1.0

AVA can now load pre-compiled TypeScript files!

First, install the new @ava/typescript package:

npm install --save-dev @ava/typescript

Now let's assume your TypeScript files are in a src directory, output to a build directory. Configure AVA like so:

ava.config.js file:

export default {
  typescript: {
    rewritePaths: {
      'src/': 'build/'
    }
  }
}

Compile your TypeScript files and run your tests! Or, to run a specific test file, run npx ava src/test.ts.

For more examples see the @ava/typescript package.

As exciting as this is, it's still early days. We need your help improving our TypeScript support. Check out the open issues.

Other changes

Thanks to @jhechtf for fixing our TypeScript recipe after the changes in AVA 3.0 91a0086

See v3.0.0...v3.1.0 for all changes.

Commits

The new version differs by 3 commits.

• 56338dc 3.1.0
• e4fef0c Rudimentary support for loading TypeScript test files
• 91a0086 Remove v2 configuration from TypeScript recipe

See the full diff