Contact for Github Repository of GALBA at https://github.com/Gaius-Augustus/GALBA:
Katharina J. Hoff, University of Greifswald, Germany, [email protected], +49 3834 420 4624, 
Tomas Brunae, Heng Lic, d , Joseph Guhlinf, Daniel Honselg, Steffen Herboldh, Natalia Nenashevaa, b, Matthis Ebela, b, Lars Gabriela, b, Mario Stankea, b, and Katharina J. Hoffa, b
[a] University of Greifswald, Institute for Mathematics and Computer Science, Walther-Rathenau-Str. 47, 17489 Greifswald, Germany
[b] University of Greifswald, Center for Functional Genomics of Microbes, Felix-Hausdorff-Str. 8, 17489 Greifswald, Germany
[c] Dana-Farber Cancer Institute, 450 Brookline Ave, Boston, MA 02215, USA
[d] Harvard Medical School, 10 Shattuck St, Boston, MA 02215, USA
[e] Joint Genome Institute, Lawrence Berkeley National Laboratory, USA
[f] Genomics Aotearoa and Laboratory for Evolution and Development, Department of Biochemistry, University of Otago, Dunedin, 9016, New Zealand
[g] Institute of Computer Science, University of Göttingen, 37077, Göttingen, Germany
[h] Faculty for Computer Science and Mathematics, University of Passau, 94032, Passau, Germany
GALBA code was derived from the BRAKER code, where a similar pipeline for using GenomeThreader with BRAKER was once published in R9. We hereby acknowledge the contributions of all BRAKER authors (in particular Simone Lange, Anica Hoppe, Alexandre Lomsadze, and Mark Borodovsky) to the code that GALBA was derived from, and we are grateful for funding for BRAKER development by the National Institutes of Health (NIH) grant GM128145, which indirectly also supported development of GALBA.
Ethan Tolman and Paul Frandsen first mentioned the idea of the DIAMOND filter for GALBA gene sets in their preprint doi: https://doi.org/10.1101/2023.12.11.569651 .
- GALBA code was derived from BRAKER, a fully automated pipeline for predicting genes in the genomes of novel species with RNA-Seq data and a large-scale database of protein sequences (that must not necessarily be closely related to the target species) with GeneMark-ES/ET/EP/ETP and AUGUSTUS. BRAKER is available at https://github.com/Gaius-Augustus/BRAKER
- TSEBRA can be used to combine GALBA gene sets with BRAKER gene sets. TSEBRA is available at https://github.com/Gaius-Augustus/TSEBRA .
The rapidly growing number of sequenced genomes requires fully automated methods for accurate gene structure annotation. Here, we provide a fully automated gene pipeline that trains AUGUSTUSR3, R4 for a novel species and subsequently predicts genes with AUGUSTUS in the genome of that species. GALBA uses the protein sequences of several (few) or one closely related species to generate a training gene set for AUGUSTUS with either miniprotR1, or GenomeThreaderR2. After training, GALBA uses the evidence from protein to genome alignment during gene prediction.
If you are not sure which pipeline to use: GALBA or BRAKER? The answer is: if you have no RNA-Seq data and the genome is large, use GALBA! Otherwise use BRAKER, first.
GALBA is named after Servius Sulpicius Galba, who ruled the Roman Empire only for a short time, before he was murdered. The name seems appropriate, because both BRAKER2 and also the soon published BRAKER3 achieve in some cases higher accuracy than GALBA ever will, and AI is on the rise.
-
Use a high quality genome assembly. If you have a huge number of very short scaffolds in your genome assembly, those short scaffolds will likely increase runtime dramatically but will not increase prediction accuracy.
-
Use simple scaffold names in the genome file (e.g.
>contig1will work better than>contig1my custom species namesome putative function /more/information/ and lots of special characters %&!*(){}). Make the scaffold names in all your fasta files simple before running any alignment program. -
In order to predict genes accurately in a novel genome, the genome should be masked for repeats. This will avoid the prediction of false positive gene structures in repetitive and low complexitiy regions. In the case of AUGUSTUS, softmasking (i.e., putting repeat regions into lower case letters and all other regions into upper case letters) leads to better results than hardmasking (i.e., replacing letters in repetitive regions by the letter
Nfor unknown nucleotide). GALBA always treats genomes as softmasked for repeats! -
Always check gene prediction results before further usage! You can, e.g. use a genome browser for visual inspection of gene models in context with extrinsic evidence data. GALBA supports the generation of track data hubs for the UCSC Genome Browser with MakeHub for this purpose.
GALBA mainly features semi-unsupervised, protein sequence evidence data supported training of AUGUSTUS with integration of extrinsic evidence in the final gene prediction step. GALBA can be used either with Miniprot or GenomeThreader as a protein spliced aligner. Miniprot is our preferred aligner because it continues to undergo development, we have put a lot of work into improving the integration of miniprot evidence (e.g. miniprothint), and is faster than GenomeThreader. We highly recommend to use Miniprot with GALBA. GenomeThreader is only included in GALBA for internal benchmarking purposes. We stopped testing GenomeThreader functionality a while ago, we do not include GenomeThreader in our containers. The GALBA pipeline with miniprot looks works like this (Figure 1 from the GALBA publication at https://link.springer.com/article/10.1186/s12859-023-05449-z):
![galba-miniprot[fig1]](/Gaius-Augustus/GALBA/blob/main/docs/figs/galba_minprot.png)
Figure a: training AUGUSTUS on the basis of spliced alignment information from proteins of a closely related species against the target genome with miniprot.
The easiest way to run GALBA is using singuarlity. We provide a docker container to build a singularity image (tested with singularity version 3.10.0-dirty). We only include Miniprot in Docker & Singularity! GenomeThreader is not included.
Build as follows (requires 1.2 GB disk space):
singularity build galba.sif docker://katharinahoff/galba-notebook:latest
Execute GALBA from galba.sif like this (i.e. it automatically mounts the user's home directory on the host system):
singularity exec galba.sif galba.pl
If you want to execute galba.sif while mounting a different directory, e.g. mounting $PWD, then you need to be aware of the following: GALBA needs a writable $AUGUSTUS_CONFIG_PATH environment variable. By default, the AUGUSTUS_CONFIG_PATH is /usr/share/augustus/config in the sif container, which is not writable. Therefore, GALBA attempts to automatically copy the contents of /usr/share/augustus/config into $HOME/.augustus on the host system. If this fails, it copies to $PWD.
If you want to re-use AUGUSTUS parameters trained by GALBA in a later run with --skipAllTraining, you must either mount the same $PWD as during training, or you must manually copy the $PWD/.augustus to the location that you will mount for the second run.
Among others, the containers include the following software that is useful in context of working with GALBA:
- galba.pl
- augustus
- TSEBRA
- make_hub.py & UCSC dependencies
- miniprot
- diamond
- cdbfasta
- seqstats
The long way around is to manually install all dependencies of GALBA.
At the time of release, this GALBA version was tested with:
-
Pygustus v0.8.0-alpha
-
Miniprot 0.12-r237R1
-
(GenomeThreader 1.7.3R2)
-
DIAMOND 0.9.230R7
-
cdbfasta 0.99
-
cdbyank 0.981
-
miniprot-boundary-scorer
-
Miniprothint
-
TSEBRA v1.1.1
Running GALBA requires a Linux-system with bash and Perl. Furthermore, GALBA requires the following CPAN-Perl modules to be
installed:
-
File::Spec::Functions -
Hash::Merge -
List::Util -
MCE::Mutex -
Module::Load::Conditional -
Parallel::ForkManager -
POSIX -
Scalar::Util::Numeric -
YAML -
Math::Utils -
File::HomeDir
On Ubuntu, for example, install the modules with CPANminusF4: sudo cpanm Module::Name, e.g. sudo cpanm Hash::Merge.
GALBA also uses a Perl module helpMod.pm that is not available on CPAN. This module is part of the GALBA release and does not require separate installation.
If you do not have root permissions on the Linux machine, try running it from the Singularity image, or try setting up an Anaconda (https://www.anaconda.com/distribution/) environment as follows:
wget https://repo.anaconda.com/archive/Anaconda3-2018.12-Linux-x86_64.sh
bash bin/Anaconda3-2018.12-Linux-x86_64.sh # do not install VS (needs root privileges)
conda install -c anaconda perl
conda install -c bioconda perl-app-cpanminus
conda install -c bioconda perl-hash-merge
conda install -c bioconda perl-parallel-forkmanager
conda install -c bioconda perl-scalar-util-numeric
conda install -c bioconda perl-yaml
conda install -c bioconda perl-class-data-inheritable
conda install -c bioconda perl-exception-class
conda install -c bioconda perl-test-pod
conda install -c anaconda biopython
conda install -c bioconda perl-file-which # skip if you are not comparing to reference annotation
conda install -c bioconda perl-mce
conda install -c bioconda perl-list-util
conda install -c bioconda perl-math-utils
conda install -c bioconda cdbtools
Subsequently, install GALBA and other software "as usual" while in your conda environment.
GALBA is a collection of Perl and Python scripts and a Perl module. The main script that will be called in order to run GALBA is galba.pl. Additional Perl and Python components are:
-
aln2hints.pl -
filterIntronsFindStrand.pl -
startAlign.pl -
helpMod.pm -
downsample_traingenes.pl -
galba_cleanup.py
All scripts (files ending with *.pl and *.py) that are part of GALBA must be executable in order to run GALBA. This should already be the case if you download GALBA from GitHub. Executability may be overwritten if you, e.g. transfer GALBA on a USB-stick to another computer. In order to check whether required files are executable, run the following command in the directory that contains GALBA Perl scripts:
ls -l *.pl *.py
The output should be similar to this:
-rwxr-xr-x 1 katharina katharina 18191 Mai 7 10:25 aln2hints.pl
-rwxr-xr-x 1 katharina katharina 6090 Feb 19 09:35 galba_cleanup.py
-rwxr-xr-x 1 katharina katharina 408782 Aug 17 18:24 galba.pl
-rwxr-xr-x 1 katharina katharina 5024 Mai 7 10:25 downsample_traingenes.pl
-rwxr-xr-x 1 katharina katharina 5754 Mai 7 10:25 filterIntronsFindStrand.pl
-rwxr-xr-x 1 katharina katharina 41674 Mai 7 10:25 startAlign.pl
It is important that the x in -rwxr-xr-x is present for each script. If that is not the case, run
`chmod a+x *.pl *.py`
in order to change file attributes.
You may find it helpful to add the directory in which GALBA perl scripts reside to your $PATH environment variable. For a single bash session, enter:
PATH=/your_path_to_galba/:$PATH
export PATH
To make this $PATH modification available to all bash sessions, add the above lines to a startup script (e.g.~/.bashrc).
GALBA calls upon various bioinformatics software tools that are not part of GALBA. Some tools are mandatory, i.e. GALBA will not run at all if these tools are not present on your system. Other tools are optional. Please install all tools that are required for running GALBA in the mode of your choice.
Download AUGUSTUS from its master branch at https://github.com/Gaius-Augustus/Augustus. Unpack AUGUSTUS and install AUGUSTUS according to AUGUSTUS README.TXT. Do not use outdated AUGUSTUS versions from other sources, e.g. Debian package or the Bioconda package! GALBA highly depends in particular on an up-to-date Augustus/scripts directory, and other sources are often lagging behind.
You should compile AUGUSTUS on your own system in order to avoid problems with versions of libraries used by AUGUSTUS. Compilation instructions are provided in the AUGUSTUS README.TXT file (Augustus/README.txt).
AUGUSTUS consists of augustus, the gene prediction tool, additional C++ tools located in Augustus/auxprogs and Perl scripts located in Augustus/scripts. Perl scripts must be executable (see instructions in section GALBA components. GALBA does not use any of the auxprogs.
Since GALBA is a pipeline that trains AUGUSTUS, i.e., writes species specific parameter files, GALBA needs write access to the configuration directory of AUGUSTUS that contains such files (Augustus/config/). If you install AUGUSTUS globally on your system, the config folder will typically not be writable by all users. Either make the directory where config resides recursively writable to users of AUGUSTUS, or copy the config/ folder (recursively) to a location where users have writing permission.
AUGUSTUS will locate the config folder by looking for the environment variable $AUGUSTUS_CONFIG_PATH. If the $AUGUSTUS_CONFIG_PATH
environment variable is not set, then GALBA will look in the path ../config relative to the directory in which it finds an AUGUSTUS
executable. Alternatively, you can supply the variable as a command line argument to GALBA (--AUGUSTUS_CONFIG_PATH=/your_path_to_AUGUSTUS/Augustus/config/). We recommend that you export the variable, e.g., for your current bash
session:
export AUGUSTUS_CONFIG_PATH=/your_path_to_AUGUSTUS/Augustus/config/
In order to make the variable available to all Bash sessions, add the above line to a startup script, e.g., ~/.bashrc.
GALBA expects the entire config directory of AUGUSTUS at $AUGUSTUS_CONFIG_PATH, i.e. the subfolders species with its contents (at least generic) and extrinsic! Providing a writable but empty folder at $AUGUSTUS_CONFIG_PATH will not work for GALBA. If you need
to separate augustus binary and $AUGUSTUS_CONFIG_PATH, we recommend that you recursively copy the un-writable config contents to a writable location.
If you have a system-wide installation of AUGUSTUS at /usr/bin/augustus, an unwritable copy of config sits at /usr/bin/augustus_config/. The folder ${HOME} is writable to you. Copy with the following command (and additionally set the then required variables):
cp -r /usr/bin/Augustus/config/ ${HOME}/augustus_config
export AUGUSTUS_CONFIG_PATH=${HOME}/augustus_config
export AUGUSTUS_BIN_PATH=/usr/bin
export AUGUSTUS_SCRIPTS_PATH=/usr/bin/augustus_scripts
GALBA automatically sets the environment variables if run from the Singuarity image.
If you installed Augustus as a debian package, then the scripts are currently up-to-date, but a folder with parameters file is missing. To fix this, please execute the following steps (with root permissions):
cd /usr/share/augustus/config
mkdir parameters
cd parameters
wget https://raw.githubusercontent.com/Gaius-Augustus/Augustus/master/config/parameters/AUG_CMDLN_PARAMETERS.md
wget https://raw.githubusercontent.com/Gaius-Augustus/Augustus/master/config/parameters/aug_cmdln_parameters.json
chmod a+r AUG_CMDLN_PARAMETERS.md aug_cmdln_parameters.json
cd ..
chmod a+r parameters
chmod a+x parameters
Adding directories of AUGUSTUS binaries and scripts to your $PATH variable enables your system to locate these tools,
automatically. It is not a requirement for running GALBA to do this, because GALBA will try to guess them from the location of another
environment variable ($AUGUSTUS_CONFIG_PATH), or both directories can be supplied as command line arguments to galba.pl, but we recommend to add them to your $PATH variable. For your current bash session, type:
PATH=:/your_path_to_augustus/bin/:/your_path_to_augustus/scripts/:$PATH
export PATH
For all your BASH sessions, add the above lines to a startup script (e.g.~/.bashrc).
This tool is required for parallelization of Augustus. Install Pygustus (https://github.com/Gaius-Augustus/pygustus) with pip (or pip3):
pip install pygustus
Important: this version of GALBA relies on pygustus 0.8.3-alpha. It will not be compatible with older versions.
This tool is only required, if you would like to run protein to genome alignments with GALBA using Miniprot. We strongly recommend using Miniprot with GALBA. Download Miniprot from https://github.com/lh3/miniprot:
git clone https://github.com/lh3/miniprot.git
cd miniprot
make
GALBA will try to locate the Miniprot executable by using an environment variable $MINIPROT_PATH. Alternatively, this can be supplied as command line argument (--MINIPROT_PATH=/your/path/to/miniprot/).
This tool is only required, if you would like to run protein to genome alignments with GALBA using Miniprot. Download miniprot-boundary-scorer from https://github.com/tomasbruna/miniprot-boundary-scorer:
git clone https://github.com/tomasbruna/miniprot-boundary-scorer.git
cd miniprot-boundary-scorer
make
GALBA will try to locate the miniprot-boundary-scorer executable by using an environment variable $SCORER_PATH. Alternatively, this can be supplied as command line argument (--SCORER_PATH=/your/path/to/miniprot-boudary-scorer/).
This tool is only required, if you would like to run protein to genome alignments with GALBA using Miniprot. Download miniprothint from https://github.com/tomasbruna/miniprothint:
git clone https://github.com/tomasbruna/miniprothint.git
GALBA will try to locate the miniprothint.py executable by using an environment variable $MINIPROTHINT_PATH. Alternatively, this can be supplied as command line argument (--MINIPROTHINT_PATH=/your/path/to/miniprothint/).
This tool is only required, if you would like to run protein to genome alignments with GALBA using GenomeThreader. Download GenomeThreader from http://genomethreader.org/. Unpack and install according to gth/README.
GALBA will try to locate the GenomeThreader executable by using an environment variable $GENOMETHREADER_PATH. Alternatively, this can be supplied as command line argument (--GENOMETHREADER_PATH=/your/path/to/gth/).
Please be aware that miniprot achieves higher accuracy than GenomeThreader in GALBA! See section on Accuracy.
On Ubuntu, Python3 is usually installed by default, python3 will be in your $PATH variable, by default, and GALBA will automatically locate it. However, you have the option to specify the python3 binary location in two other ways:
-
Export an environment variable
$PYTHON3_PATH, e.g. in your~/.bashrcfile:export PYTHON3_PATH=/path/to/python3/ -
Specify the command line option
--PYTHON3_PATH=/path/to/python3/togalba.pl.
DIAMOND is used for removal of redundant training genes.
Obtain and unpack DIAMOND as follows:
wget http://github.com/bbuchfink/diamond/releases/download/v0.9.24/diamond-linux64.tar.gz
tar xzf diamond-linux64.tar.gz
If already in your $PATH variable, GALBA will find diamond, automatically. Otherwise, GALBA can locate the diamond binary either by using an environment variable $DIAMOND_PATH, or by taking a command line argument (--DIAMOND_PATH=/your_path_to_diamond). In order to set the environment variable e.g. for your current bash session, type:
export DIAMOND_PATH=/your_path_to_diamond/
Add the above line to a startup script (e.g. ~/.bashrc) in order to set the environment variable for all bash sessions.
TSEBRA is (in most cases) used to remove noise from the Augustus predictions.
Obtain TSEBRA as follows:
git clone https://github.com/Gaius-Augustus/TSEBRA.git
If already in your $PATH variable, GALBA will find tsebra.py, automatically. Otherwise, GALBA can locate tsebra.py either by using an environment variable $TSEBRA_PATH, or by taking a command line argument (--TSEBRA_PATH=/your_path_to_tsebra). In order to set the environment variable e.g. for your current bash session, type:
export TSEBRA_PATH=/your_path_to_tsebra/bin/
Add the above line to a startup script (e.g. ~/.bashrc) in order to set the environment variable for all bash sessions.
If Biopython is installed, GALBA can generate FASTA-files with coding sequences and protein sequences predicted by AUGUSTUS and generate track data hubs for visualization of a GALBA run with MakeHub R8.
These are optional steps. The first can be disabled with the command-line flag --skipGetAnnoFromFasta, the second can be activated by using the command-line options --makehub [email protected], Biopython is not required if neither of these optional steps shall be performed.
On Ubuntu, install Python3 package manager with:
`sudo apt-get install python3-pip`
Then, install Biopython with:
`sudo pip3 install biopython`
cdbfasta and cdbyank are required by GALBA for correcting AUGUSTUS genes with in frame stop codons (spliced stop codons) using the AUGUSTUS script fix_in_frame_stop_codon_genes.py. This can be skipped with --skip_fixing_broken_genes.
On Ubuntu, install cdbfasta with:
`sudo apt-get install cdbfasta`
For other systems, you can for example obtain cdbfasta from https://github.com/gpertea/cdbfasta, e.g.:
git clone https://github.com/gpertea/cdbfasta.git`
cd cdbfasta
make all
On Ubuntu, cdbfasta and cdbyank will be in your $PATH variable after installation, and GALBA will automatically locate them. However, you have the option to specify the cdbfasta and cdbyank binary location in two other ways:
- Export an environment variable
$CDBTOOLS_PATH, e.g. in your~/.bashrcfile:
export CDBTOOLS_PATH=/path/to/cdbtools/
- Specify the command line option
--CDBTOOLS_PATH=/path/to/cdbtools/togalba.pl.
If you wish to automaticaly generate a track data hub of your GALBA run, the MakeHub software, available at https://github.com/Gaius-Augustus/MakeHub is required. Download the software (either by running git clone https://github.com/Gaius-Augustus/MakeHub.git, or by
picking a release from https://github.com/Gaius-Augustus/MakeHub/releases. Extract the release package if you downloaded a release (e.g. unzip MakeHub.zip or tar -zxvf MakeHub.tar.gz.
GALBA will try to locate the make_hub.py script by using an environment variable $MAKEHUB_PATH. Alternatively, this can be supplied as command line argument (--MAKEHUB_PATH=/your/path/to/MakeHub/). GALBA can also try to guess the location of MakeHub on your system.
galba.pl uses getconf to see how many threads can be run on your system. On Ubuntu, you can install it with:
sudo apt-get install libc-bin
In the following, we describe the GALBA calls for Miniprot and GenomeThreader. In general, we recommend that you run GALBA on genomic sequences that have been softmasked for Repeats.
For running GALBA with Miniprot, type:
galba.pl --species=yourSpecies --genome=genome.fasta \
--prot_seq=proteins.fa
For running GALBA with GenomeThreader, type:
galba.pl --species=yourSpecies --genome=genome.fasta \
--prot_seq=proteins.fa --prg=gth
Please run galba.pl --help to obtain a full list of options.
Use either miniprot (default) or gth (for GenomeThreader) to generate training genes and hints.
Compute AUGUSTUS ab initio predictions in addition to AUGUSTUS predictions with hints (additional output files: augustus.ab_initio.*. This may be useful for estimating the quality of training gene parameters when inspecting predictions in a Browser.
One or several command line arguments to be passed to AUGUSTUS, if several arguments are given, separate them by whitespace, i.e. "--first_arg=sth --second_arg=sth". This may be be useful if you know that gene prediction in your particular species benefits from a particular AUGUSTUS argument during the prediction step.
Specifies the maximum number of threads that can be used during computation. GALBA has to run some steps on a single thread, others can take advantage of multiple threads. If you use more than 8 threads, this will not speed up all parallelized steps, in particular, the time consuming optimize_augustus.pl will not use more than 8 threads.
Execute CRF training for AUGUSTUS; resulting parameters are only kept for final predictions if they show higher accuracy than HMM parameters. This increases runtime!
Change the parameter
--makehub --email=[email protected]
If --makehub and [email protected] (with your valid e-mail adress) are provided, a track data hub for visualizing results with the UCSC Genome Browser will be generated using MakeHub (https://github.com/Gaius-Augustus/MakeHub).
Disable filtering AUGUSTUS genes by DIAMOND hit determination against input proteins (default is false). If you do not trust the protein donor, or if the donor is rather distantly related, please disable the DIAMOND filter. With execellent quality protein donors and close relatives, you increase specificity in large vertebrate genomes, significantly, by using the DIAMOND filter. In smaller genomes, it makes less of a difference. Generally, using the filter comes at a (usually small) cost in sensitivity, i.e. you will miss some genes that are not supported by protein evidence.
GALBA produces several important output files in the working directory.
-
galba.gtf: Genes predicted by AUGUSTUS with hints from given extrinsic evidence.
-
augustus.ab_initio.gtf: Genes predicted by AUGUSTUS in ab initio mode in GTF-format. It will only be present if GALBA was run with the option
--AUGUSTUS_ab_initio. -
hintsfile.gff: The extrinsic evidence data extracted from protein data.
GALBA output files may be present with the following name endings:
-
GTF-format is always produced.
-
GFF3-format is produced if the flag
--gff3was specified to GALBA. -
Coding sequences in FASTA-format
-
Protein sequence files in FASTA-format
For details about gtf format, see http://www.sanger.ac.uk/Software/formats/GFF/. A GTF-format file contains one line per predicted exon. Example:
HS04636 AUGUSTUS initial 966 1017 . + 0 transcript_id "g1.1"; gene_id "g1";
HS04636 AUGUSTUS internal 1818 1934 . + 2 transcript_id "g1.1"; gene_id "g1";
The columns (fields) contain:
seqname source feature start end score strand frame transcript ID and gene ID
If the --makehub option was used and MakeHub is available on your system, a hub directory beginning with the name hub_ will be created. Copy this directory to a publicly accessible web server. A file hub.txt resides in the directory. Provide the link to that file to the UCSC Genome Browser for visualizing results. MakeHub is included in the Singularity image.
An example data set is contained in the directory GALBA/example.
The example data set was not compiled in order to achieve optimal prediction accuracy, but in order to quickly test pipeline components. The small subset of the genome used in these test examples is not long enough for GALBA training to work well.
Data corresponds to the last 1,000,000 nucleotides of Arabidopsis thaliana's chromosome Chr5, split into 8 artificial contigs.
The protein sequences are a subset from Arabidopsis lyrata subsp. lyrata genome assembly GCA_000004255.1.
List of files:
genome.fa- genome file in fasta formatproteins.fa- protein sequences in fasta format
The below given commands assume that you configured all paths to tools by exporting bash variables or that you have the necessary tools in your $PATH.
The example data set also contains scripts tests/test*.sh that will execute below listed commands for testing GALBA with the example data set. You find example results of AUGUSTUS in the folder results/test*. Be aware that GALBA contains several parts where random variables are used, i.e. results that you obtain when running the tests may not be exactly identical. To compare your test results with the reference ones, you can use the compare_intervals_exact.pl script from BRAKER as follows:
# Compare CDS features
compare_intervals_exact.pl --f1 augustus.hints.gtf --f2 ../../results/test${N}/augustus.hints.gtf --verbose
# Compare transcripts
compare_intervals_exact.pl --f1 augustus.hints.gtf --f2 ../../results/test${N}/augustus.hints.gtf --trans --verbose
We give runtime estimations derived from computing on Intel(R) Xeon(R) CPU E5530 @ 2.40GHz.
galba.pl --genome=genome.fa --prot_seq=proteins.fa \
--skipOptimize --threads 8
This test is implemented in test1.sh, expected runtime is ~2 minutes. The fast runtime of this test is mostly caused by generating a low number of training genes, and by skipping an optimization step for AUGUSTUS training.
galba.pl --genome=genome.fa --prot_seq=proteins.fa \
--skipOptimize --prg=gth --workingdir=$wd \
--threads 8
This test is implemented in test2.sh, expected runtime is ~2:15 minutes. The fast runtime of this test is mostly caused by generating a low number of training genes, and by skipping an optimization step for AUGUSTUS training.
The training step of all pipelines can be skipped with the option --skipAllTraining. This means, only AUGUSTUS predictions will be performed, using pre-trained, already existing parameters. For example, you can predict genes with the command:
galba.pl --genome=genome.fa --prot_seq=proteins.fa \
--skipAllTraining \
--threads 8 --species=arabidopsis
This test is implemented in test3.sh, expected runtime is 2:30 minutes.
For accuracy results of GALBA, we refer you to our publication at https://link.springer.com/article/10.1186/s12859-023-05449-z .
Accuracy of GALBA with GenomeThreader is generally lower than with miniprot. In many cases, GenomeThreader generates too few training genes for training AUGUSTUS (the shown accuracy with miniprot is from GALBA v1.0.0; we stopped testing GenomeThreader afterwards; GALBA with miniprot accuracy has improved, since):
![galba-miniprot-gth-fly[fig4]](/Gaius-Augustus/GALBA/blob/main/docs/figs/galba_miniprot_gth_fly.png)
Before reporting bugs, please check that you are using the most recent versions of AUGUSTUS and GALBA. Also, check the list of Common problems, and the Issue list on GitHub before reporting bugs. We do monitor open issues on GitHub. Sometimes, we are unable to help you, immediately, but we try hard to solve your problems.
If you found a bug, please open an issue at https://github.com/Gaius-Augustus/GALBA/issues (or contact [email protected]).
Information worth mentioning in your bug report:
Check in ${wd}/GALBA.log at which step galba.pl crashed.
There are a number of other files that might be of interest, depending on where in the pipeline the problem occurred. Some of the following files will not be present if they did not contain any errors.
-
${wd}/hintsfile.gff- is this file empty? If yes, something went wrong during hints generation - does this file contain hints from source “b2h” and of type “intron”? -
${wd}/genbank.good.gb- try a “grep -c LOCUS genbank.good.gb” to determine the number of training genes for training AUGUSTUS, should not be low -
${wd}/errors/firstetraining.stderr- contains errors from first iteration of training AUGUSTUS -
${wd}/errors/secondetraining.stderr- contains errors from second iteration of training AUGUSTUS -
${wd}/errors/optimize_augustus.stderr- contains errors optimize_augustus.pl (additional training set for AUGUSTUS) -
${wd}/errors/augustus*.stderr- contain AUGUSTUS execution errors -
${wd}/startAlign.stderr- if you provided a protein fasta file and--prg=gthoption and this file is not empty, something went wrong during protein alignment -
${wd}/startAlign.stdout- may give clues on at which point protein alignment went wrong
-
[something] failed to execute!
When providing paths to software to GALBA, please use absolute, non-abbreviated paths. For example, GALBA might have problems with
--DIAMOND_PATH=./diamond/or--DIAMOND_PATH=~/diamond/. Please useDIAMOND_PATH=/full/absolute/path/to/diamond/, instead. This applies to all path specifications as command line options togalba.pl. Relative paths and absolute paths will not pose problems if you export a bash variable, instead, or if you append the location of tools to your $PATH variable. -
GALBA cannot find the Augustus script XYZ...
Update Augustus from github with
git clone https://github.com/Gaius-Augustus/Augustus.git. Do not use Augustus from other sources. GALBA is highly dependent on an up-to-date Augustus. Augustus releases happen rather rarely, updates to the Augustus scripts folder occur rather frequently. -
Does GALBA depend on Python3?
It does. The python scripts employed by GALBA are not compatible with Python2.
-
Why does GALBA predict more genes than I expected?
If transposable elements (or similar) have not been masked appropriately, AUGUSTUS tends to predict those elements as protein coding genes. This can lead to a huge number genes. You can check whether this is the case for your project by BLASTing (or DIAMONDing) the predicted protein sequences against themselves (all vs. all) and counting how many of the proteins have a high number of high quality matches. You can use the output of this analysis to divide your gene set into two groups: the protein coding genes that you want to find and the repetitive elements that were additionally predicted.
Since GALBA is a pipeline that calls several Bioinformatics tools, publication of results obtained by GALBA requires that not only GALBA is referred to, but also the tools that are called by GALBA. GALBA will output a file what-to-cite.txt in the GALBA working directory, informing you about which exact sources apply to your run.
-
Always cite:
-
Bruna, T., Li, H., Guhlin, J., Honsel, D., Herbold, S., Stanke, M., Nenasheva, N., Ebel, M., Gabriel, L., and Hoff, K.J. (2023) "GALBA: Genome Annotation with Miniprot and AUGUSTUS". BMC Bioinformatics, 24:327, https://doi.org/10.1186/s12859-023-05449-z.
-
Hoff, K. and Stanke, M. 2019. “Predicting genes in single genomes with AUGUSTUS.“ Current Protocols in Bioinformatics, 65(1), e57.
-
Stanke. M., Schöffmann, O., Morgenstern, B. and Waack, S. (2006). Gene prediction in eukaryotes with a generalized hidden Markov model that uses hints from external sources. BMC Bioinformatics 7, 62.
-
Buchfink, B., Xie, C., Huson, D.H. (2015). Fast and sensitive protein alignment using DIAMOND. Nature Methods 12:59-60.
-
-
If GALBA was executed with Miniprot, cite:
- Li, H. (2023). Protein-to-genome alignment with miniprot. Bioinformatics, 39(1), btad014.
-
If GALBA was executed with GenomeThreader, cite:
-
Gremme, G. (2013). Computational Gene Structure Prediction. PhD thesis, Universität Hamburg.
-
Hoff, K.J., Lomsadze, A., Borodovsky, M. and Stanke, M. (2019). Whole-Genome Annotation with BRAKER. Methods Mol Biol. 1962:65-95, doi: 10.1007/978-1-4939-9173-0_5.
-
-
If GALBA called TSEBRA (for all genomes >140 Mbp), cite:
- Gabriel, L., Hoff, K. J., Bruna, T., Borodovsky, M., and Stanke, M. (2021). TSEBRA: transcript selector for BRAKER. BMC Bioinformatics 22(1):1-12.
-
If GALBA called MakeHub for creating a track data hub for visualization of GALBA results with the UCSC Genome Browser, cite:
- Hoff, K.J. (2019) MakeHub: Fully automated generation of UCSC Genome Browser Assembly Hubs. Genomics, Proteomics and Bioinformatics 17(5):546-549.
All source code, i.e. scripts/*.pl or scripts/*.py are under the Artistic License (see http://www.opensource.org/licenses/artistic-license.php).
[F2] Please use the latest version from the master branch of AUGUSTUS distributed by the original developers, it is available from github at https://github.com/Gaius-Augustus/Augustus. Problems have been reported from users that tried to run GALBA with AUGUSTUS releases maintained by third parties, i.e. Bioconda. ↩
[F4] install with sudo apt-get install cpanminus ↩
[R1] Li, H. (2023). Protein-to-genome alignment with miniprot. Bioinformatics, 39(1), btad014.↩
[R2] Gremme, G. 2013. “Computational Gene Structure Prediction.” PhD thesis, Universität Hamburg.↩
[R3] Stanke, M., Schöffmann, O., Morgenstern, B., and Waack., S. 2006. “Gene Prediction in Eukaryotes with a Generalized Hidden Markov Model That Uses Hints from External Sources.” BMC Bioinformatics 7 (1). BioMed Central: 62.↩
[R4] Hoff, K. and Stanke, M. 2019. “Predicting genes in single genomes with AUGUSTUS.“ Current Protocols in Bioinformatics, 65(1), e57.↩
[R5] Bruna, T., Hoff, K. J., Lomsadze, A., Stanke, M., and Borodvsky, M. 2021. “BRAKER2: automatic eukaryotic genome annotation with GeneMark-EP+ and AUGUSTUS supported by a protein database." NAR Genomics and Bioinformatics 3(1):lqaa108.↩
[R6] Hoff, K. J., Lange, S., Lomsadze, A., Borodovsky, M., and Stanke, M. 2015. “BRAKER1: Unsupervised Rna-Seq-Based Genome Annotation with Genemark-et and Augustus.” Bioinformatics 32 (5), 767--69.↩
[R7]Buchfink, B., Xie, C., and Huson, D. H. 2015. Fast and sensitive protein alignment using DIAMOND. Nature Methods, 12(1), 59-60.↩
[R8] Hoff, K.J. 2019. MakeHub: Fully automated generation of UCSC Genome Browser Assembly Hubs. Genomics, Proteomics and Bioinformatics, in press, preprint on bioarXive, doi: https://doi.org/10.1101/550145.↩
[R9]Hoff, K.J., Lomsadze, A., Borodovsky, M. and Stanke, M. (2019). Whole-Genome Annotation with BRAKER. Methods Mol Biol. 1962:65-95, doi: 10.1007/978-1-4939-9173-0_5.↩
